mwifiex: wmm: Fix -Wunused-const-variable warnings

In file included from drivers/net/wireless/marvell/mwifiex//cmdevt.c:26:0:
drivers/net/wireless/marvell/mwifiex//wmm.h:41:17: warning: ‘tos_to_tid_inv’ defined but not used [-Wunused-const-variable=]
 static const u8 tos_to_tid_inv[] = {
                 ^~~~~~~~~~~~~~
drivers/net/wireless/marvell/mwifiex//wmm.h:34:18: warning: ‘mwifiex_1d_to_wmm_queue’ defined but not used [-Wunused-const-variable=]
 static const u16 mwifiex_1d_to_wmm_queue[8] = { 1, 0, 0, 1, 2, 2, 3, 3 };
                  ^~~~~~~~~~~~~~~~~~~~~~~

move the variables definition to .c file, and leave declarations
in the header file to fix these warnings.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200902140846.29024-1-yuehaibing@huawei.com

drivers/net/wireless/marvell/mwifiex/main.c

@@ -48,6 +48,8 @@ bool aggr_ctrl;
 module_param(aggr_ctrl, bool, 0000);
 MODULE_PARM_DESC(aggr_ctrl, "usb tx aggregation enable:1, disable:0");
 
+const u16 mwifiex_1d_to_wmm_queue[8] = { 1, 0, 0, 1, 2, 2, 3, 3 };
+
 /*
  * This function registers the device and performs all the necessary
  * initializations.

drivers/net/wireless/marvell/mwifiex/wmm.c

@@ -40,6 +40,21 @@
 static bool disable_tx_amsdu;
 module_param(disable_tx_amsdu, bool, 0644);
 
+/* This table inverses the tos_to_tid operation to get a priority
+ * which is in sequential order, and can be compared.
+ * Use this to compare the priority of two different TIDs.
+ */
+const u8 tos_to_tid_inv[] = {
+	0x02,  /* from tos_to_tid[2] = 0 */
+	0x00,  /* from tos_to_tid[0] = 1 */
+	0x01,  /* from tos_to_tid[1] = 2 */
+	0x03,
+	0x04,
+	0x05,
+	0x06,
+	0x07
+};
+
 /* WMM information IE */
 static const u8 wmm_info_ie[] = { WLAN_EID_VENDOR_SPECIFIC, 0x07,
 	0x00, 0x50, 0xf2, 0x02,

drivers/net/wireless/marvell/mwifiex/wmm.h

@@ -31,22 +31,8 @@ enum ieee_types_wmm_ecw_bitmasks {
 	MWIFIEX_ECW_MAX = (BIT(4) | BIT(5) | BIT(6) | BIT(7)),
 };
 
-static const u16 mwifiex_1d_to_wmm_queue[8] = { 1, 0, 0, 1, 2, 2, 3, 3 };
-
-/*
- * This table inverses the tos_to_tid operation to get a priority
- * which is in sequential order, and can be compared.
- * Use this to compare the priority of two different TIDs.
- */
-static const u8 tos_to_tid_inv[] = {
-	0x02,  /* from tos_to_tid[2] = 0 */
-	0x00,  /* from tos_to_tid[0] = 1 */
-	0x01,  /* from tos_to_tid[1] = 2 */
-	0x03,
-	0x04,
-	0x05,
-	0x06,
-	0x07};
+extern const u16 mwifiex_1d_to_wmm_queue[];
+extern const u8 tos_to_tid_inv[];
 
 /*
  * This function retrieves the TID of the given RA list.