Merge branch 'net-dsa-b53-Various-ARL-fixes'

Florian Fainelli says:

====================
net: dsa: b53: Various ARL fixes

This patch series fixes a number of short comings in the existing b53
driver ARL management logic in particular:

- we were not looking up the {MAC,VID} tuples against their VID, despite
  having VLANs enabled

- the MDB entries (multicast) would lose their validity as soon as a
  single port in the vector would leave the entry

- the ARL was currently under utilized because we would always place new
  entries in bin index #1, instead of using all possible bins available,
  thus reducing the ARL effective size by 50% or 75% depending on the
  switch generation

- it was possible to overwrite the ARL entries because no proper space
  verification was done

This patch series addresses all of these issues.

Changes in v2:
- added a new patch to correctly flip invidual VLAN learning vs. shared
  VLAN learning depending on the global VLAN state

- added Andrew's R-b tags for patches which did not change

- corrected some verbosity and minor issues in patch #4 to match caller
  expectations, also avoid a variable length DECLARE_BITMAP() call
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/dsa/b53/b53_common.c

@@ -1474,6 +1474,10 @@ static int b53_arl_rw_op(struct b53_device *dev, unsigned int op)
 		reg |= ARLTBL_RW;
 	else
 		reg &= ~ARLTBL_RW;
+	if (dev->vlan_enabled)
+		reg &= ~ARLTBL_IVL_SVL_SELECT;
+	else
+		reg |= ARLTBL_IVL_SVL_SELECT;
 	b53_write8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, reg);
 
 	return b53_arl_op_wait(dev);
@@ -1483,6 +1487,7 @@ static int b53_arl_read(struct b53_device *dev, u64 mac,
 			u16 vid, struct b53_arl_entry *ent, u8 *idx,
 			bool is_valid)
 {
+	DECLARE_BITMAP(free_bins, B53_ARLTBL_MAX_BIN_ENTRIES);
 	unsigned int i;
 	int ret;
 
@@ -1490,6 +1495,8 @@ static int b53_arl_read(struct b53_device *dev, u64 mac,
 	if (ret)
 		return ret;
 
+	bitmap_zero(free_bins, dev->num_arl_entries);
+
 	/* Read the bins */
 	for (i = 0; i < dev->num_arl_entries; i++) {
 		u64 mac_vid;
@@ -1501,13 +1508,24 @@ static int b53_arl_read(struct b53_device *dev, u64 mac,
 			   B53_ARLTBL_DATA_ENTRY(i), &fwd_entry);
 		b53_arl_to_entry(ent, mac_vid, fwd_entry);
 
-		if (!(fwd_entry & ARLTBL_VALID))
+		if (!(fwd_entry & ARLTBL_VALID)) {
+			set_bit(i, free_bins);
 			continue;
+		}
 		if ((mac_vid & ARLTBL_MAC_MASK) != mac)
 			continue;
+		if (dev->vlan_enabled &&
+		    ((mac_vid >> ARLTBL_VID_S) & ARLTBL_VID_MASK) != vid)
+			continue;
 		*idx = i;
+		return 0;
 	}
 
+	if (bitmap_weight(free_bins, dev->num_arl_entries) == 0)
+		return -ENOSPC;
+
+	*idx = find_first_bit(free_bins, dev->num_arl_entries);
+
 	return -ENOENT;
 }
 
@@ -1537,10 +1555,21 @@ static int b53_arl_op(struct b53_device *dev, int op, int port,
 	if (op)
 		return ret;
 
-	/* We could not find a matching MAC, so reset to a new entry */
-	if (ret) {
+	switch (ret) {
+	case -ENOSPC:
+		dev_dbg(dev->dev, "{%pM,%.4d} no space left in ARL\n",
+			addr, vid);
+		return is_valid ? ret : 0;
+	case -ENOENT:
+		/* We could not find a matching MAC, so reset to a new entry */
+		dev_dbg(dev->dev, "{%pM,%.4d} not found, using idx: %d\n",
+			addr, vid, idx);
 		fwd_entry = 0;
-		idx = 1;
+		break;
+	default:
+		dev_dbg(dev->dev, "{%pM,%.4d} found, using idx: %d\n",
+			addr, vid, idx);
+		break;
 	}
 
 	/* For multicast address, the port is a bitmask and the validity
@@ -1558,7 +1587,6 @@ static int b53_arl_op(struct b53_device *dev, int op, int port,
 		ent.is_valid = !!(ent.port);
 	}
 
-	ent.is_valid = is_valid;
 	ent.vid = vid;
 	ent.is_static = true;
 	ent.is_age = false;

drivers/net/dsa/b53/b53_regs.h

@@ -292,6 +292,7 @@
 /* ARL Table Read/Write Register (8 bit) */
 #define B53_ARLTBL_RW_CTRL		0x00
 #define    ARLTBL_RW			BIT(0)
+#define    ARLTBL_IVL_SVL_SELECT	BIT(6)
 #define    ARLTBL_START_DONE		BIT(7)
 
 /* MAC Address Index Register (48 bit) */
@@ -304,7 +305,7 @@
  *
  * BCM5325 and BCM5365 share most definitions below
  */
-#define B53_ARLTBL_MAC_VID_ENTRY(n)	(0x10 * (n))
+#define B53_ARLTBL_MAC_VID_ENTRY(n)	((0x10 * (n)) + 0x10)
 #define   ARLTBL_MAC_MASK		0xffffffffffffULL
 #define   ARLTBL_VID_S			48
 #define   ARLTBL_VID_MASK_25		0xff
@@ -316,13 +317,16 @@
 #define   ARLTBL_VALID_25		BIT(63)
 
 /* ARL Table Data Entry N Registers (32 bit) */
-#define B53_ARLTBL_DATA_ENTRY(n)	((0x10 * (n)) + 0x08)
+#define B53_ARLTBL_DATA_ENTRY(n)	((0x10 * (n)) + 0x18)
 #define   ARLTBL_DATA_PORT_ID_MASK	0x1ff
 #define   ARLTBL_TC(tc)			((3 & tc) << 11)
 #define   ARLTBL_AGE			BIT(14)
 #define   ARLTBL_STATIC			BIT(15)
 #define   ARLTBL_VALID			BIT(16)
 
+/* Maximum number of bin entries in the ARL for all switches */
+#define B53_ARLTBL_MAX_BIN_ENTRIES	4
+
 /* ARL Search Control Register (8 bit) */
 #define B53_ARL_SRCH_CTL		0x50
 #define B53_ARL_SRCH_CTL_25		0x20