usb: dwc2: don't use ID/Vbus detection if usb-role-switch on STM32MP15 SoCs

If usb-role-switch is present in the device tree, it means that ID and Vbus
signals are not connected to the OTG controller but to an external
component (GPIOs, Type-C controller). In this configuration, usb role
switch is used to force valid sessions on STM32MP15 SoCs.
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>

drivers/usb/dwc2/params.c

@@ -185,7 +185,7 @@ static void dwc2_set_stm32mp15_hsotg_params(struct dwc2_hsotg *hsotg)
 	struct dwc2_core_params *p = &hsotg->params;
 
 	p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
-	p->activate_stm_id_vb_detection = true;
+	p->activate_stm_id_vb_detection = !device_property_read_bool(hsotg->dev, "usb-role-switch");
 	p->host_rx_fifo_size = 440;
 	p->host_nperio_tx_fifo_size = 256;
 	p->host_perio_tx_fifo_size = 256;