Merge branch '40GbE-Intel-Wired-LAN-Driver-Updates-2020-10-12'

Tony Nguyen says:

====================
40GbE Intel Wired LAN Driver Updates 2020-10-12

This series contains updates to i40e and e1000 drivers.

Jaroslaw adds support for changing FEC on i40e if the firmware supports it.

Jesse fixes a kbuild-bot warning regarding ternary operator on e1000.

v2: Return -EOPNOTSUPP instead of -EINVAL when FEC settings are not
supported by firmware. Remove, unneeded, done label and return errors
directly in i40e_set_fec_param() for patch 1. Dropped, previous patch 2,
to send to net.
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/ethernet/intel/e1000/e1000_hw.c

@@ -4401,17 +4401,9 @@ void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value)
 static void e1000_clear_vfta(struct e1000_hw *hw)
 {
 	u32 offset;
-	u32 vfta_value = 0;
-	u32 vfta_offset = 0;
-	u32 vfta_bit_in_reg = 0;
 
 	for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
-		/* If the offset we want to clear is the same offset of the
-		 * manageability VLAN ID, then clear all bits except that of the
-		 * manageability unit
-		 */
-		vfta_value = (offset == vfta_offset) ? vfta_bit_in_reg : 0;
-		E1000_WRITE_REG_ARRAY(hw, VFTA, offset, vfta_value);
+		E1000_WRITE_REG_ARRAY(hw, VFTA, offset, 0);
 		E1000_WRITE_FLUSH();
 	}
 }

drivers/net/ethernet/intel/i40e/i40e_adminq.c

@@ -541,6 +541,12 @@ static void i40e_set_hw_flags(struct i40e_hw *hw)
 		    (aq->api_maj_ver == 1 &&
 		     aq->api_min_ver >= I40E_MINOR_VER_GET_LINK_INFO_X722))
 			hw->flags |= I40E_HW_FLAG_AQ_PHY_ACCESS_CAPABLE;
+
+		if (aq->api_maj_ver > 1 ||
+		    (aq->api_maj_ver == 1 &&
+		     aq->api_min_ver >= I40E_MINOR_VER_FW_REQUEST_FEC_X722))
+			hw->flags |= I40E_HW_FLAG_X722_FEC_REQUEST_CAPABLE;
+
 		fallthrough;
 	default:
 		break;

drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h

@@ -24,6 +24,8 @@
 #define I40E_MINOR_VER_GET_LINK_INFO_X722 0x0009
 /* API version 1.6 for X722 devices adds ability to stop FW LLDP agent */
 #define I40E_MINOR_VER_FW_LLDP_STOPPABLE_X722 0x0006
+/* API version 1.10 for X722 devices adds ability to request FEC encoding */
+#define I40E_MINOR_VER_FW_REQUEST_FEC_X722 0x000A
 
 struct i40e_aq_desc {
 	__le16 flags;

drivers/net/ethernet/intel/i40e/i40e_ethtool.c

@@ -891,6 +891,7 @@ static void i40e_get_settings_link_up(struct i40e_hw *hw,
 		if (hw_link_info->requested_speeds & I40E_LINK_SPEED_10GB)
 			ethtool_link_ksettings_add_link_mode(ks, advertising,
 							     10000baseT_Full);
+		i40e_get_settings_link_up_fec(hw_link_info->req_fec_info, ks);
 		break;
 	case I40E_PHY_TYPE_SGMII:
 		ethtool_link_ksettings_add_link_mode(ks, supported, Autoneg);
@@ -1481,12 +1482,16 @@ static int i40e_set_fec_param(struct net_device *netdev,
 	struct i40e_pf *pf = np->vsi->back;
 	struct i40e_hw *hw = &pf->hw;
 	u8 fec_cfg = 0;
-	int err = 0;
 
 	if (hw->device_id != I40E_DEV_ID_25G_SFP28 &&
-	    hw->device_id != I40E_DEV_ID_25G_B) {
-		err = -EPERM;
-		goto done;
+	    hw->device_id != I40E_DEV_ID_25G_B &&
+	    hw->device_id != I40E_DEV_ID_KX_X722)
+		return -EPERM;
+
+	if (hw->mac.type == I40E_MAC_X722 &&
+	    !(hw->flags & I40E_HW_FLAG_X722_FEC_REQUEST_CAPABLE)) {
+		netdev_err(netdev, "Setting FEC encoding not supported by firmware. Please update the NVM image.\n");
+		return -EOPNOTSUPP;
 	}
 
 	switch (fecparam->fec) {
@@ -1508,14 +1513,10 @@ static int i40e_set_fec_param(struct net_device *netdev,
 	default:
 		dev_warn(&pf->pdev->dev, "Unsupported FEC mode: %d",
 			 fecparam->fec);
-		err = -EINVAL;
-		goto done;
+		return -EINVAL;
 	}
 
-	err = i40e_set_fec_cfg(netdev, fec_cfg);
-
-done:
-	return err;
+	return i40e_set_fec_cfg(netdev, fec_cfg);
 }
 
 static int i40e_nway_reset(struct net_device *netdev)
@@ -4951,8 +4952,7 @@ static int i40e_set_priv_flags(struct net_device *dev, u32 flags)
 		}
 	}
 
-	if (((changed_flags & I40E_FLAG_RS_FEC) ||
-	     (changed_flags & I40E_FLAG_BASE_R_FEC)) &&
+	if (changed_flags & I40E_FLAG_RS_FEC &&
 	    pf->hw.device_id != I40E_DEV_ID_25G_SFP28 &&
 	    pf->hw.device_id != I40E_DEV_ID_25G_B) {
 		dev_warn(&pf->pdev->dev,
@@ -4960,6 +4960,15 @@ static int i40e_set_priv_flags(struct net_device *dev, u32 flags)
 		return -EOPNOTSUPP;
 	}
 
+	if (changed_flags & I40E_FLAG_BASE_R_FEC &&
+	    pf->hw.device_id != I40E_DEV_ID_25G_SFP28 &&
+	    pf->hw.device_id != I40E_DEV_ID_25G_B &&
+	    pf->hw.device_id != I40E_DEV_ID_KX_X722) {
+		dev_warn(&pf->pdev->dev,
+			 "Device does not support changing FEC configuration\n");
+		return -EOPNOTSUPP;
+	}
+
 	/* Process any additional changes needed as a result of flag changes.
 	 * The changed_flags value reflects the list of bits that were
 	 * changed in the code above.

drivers/net/ethernet/intel/i40e/i40e_main.c

@@ -6622,6 +6622,25 @@ void i40e_print_link_message(struct i40e_vsi *vsi, bool isup)
 			else
 				req_fec = "CL74 FC-FEC/BASE-R";
 		}
+		netdev_info(vsi->netdev,
+			    "NIC Link is Up, %sbps Full Duplex, Requested FEC: %s, Negotiated FEC: %s, Autoneg: %s, Flow Control: %s\n",
+			    speed, req_fec, fec, an, fc);
+	} else if (pf->hw.device_id == I40E_DEV_ID_KX_X722) {
+		req_fec = "None";
+		fec = "None";
+		an = "False";
+
+		if (pf->hw.phy.link_info.an_info & I40E_AQ_AN_COMPLETED)
+			an = "True";
+
+		if (pf->hw.phy.link_info.fec_info &
+		    I40E_AQ_CONFIG_FEC_KR_ENA)
+			fec = "CL74 FC-FEC/BASE-R";
+
+		if (pf->hw.phy.link_info.req_fec_info &
+		    I40E_AQ_REQUEST_FEC_KR)
+			req_fec = "CL74 FC-FEC/BASE-R";
+
 		netdev_info(vsi->netdev,
 			    "NIC Link is Up, %sbps Full Duplex, Requested FEC: %s, Negotiated FEC: %s, Autoneg: %s, Flow Control: %s\n",
 			    speed, req_fec, fec, an, fc);

drivers/net/ethernet/intel/i40e/i40e_type.h

@@ -595,6 +595,7 @@ struct i40e_hw {
 #define I40E_HW_FLAG_FW_LLDP_PERSISTENT     BIT_ULL(5)
 #define I40E_HW_FLAG_AQ_PHY_ACCESS_EXTENDED BIT_ULL(6)
 #define I40E_HW_FLAG_DROP_MODE              BIT_ULL(7)
+#define I40E_HW_FLAG_X722_FEC_REQUEST_CAPABLE BIT_ULL(8)
 	u64 flags;
 
 	/* Used in set switch config AQ command */