Commit d613839e authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  block: remove some includings of blktrace_api.h
  mg_disk: seperate mg_disk.h again
  block: Introduce helper to reset queue limits to default values
  cfq: remove extraneous '\n' in blktrace output
  ubifs: register backing_dev_info
  btrfs: properly register fs backing device
  block: don't overwrite bdi->state after bdi_init() has been run
  cfq: cleanup for last_end_request in cfq_data
parents 609106b9 e212d6f2
......@@ -26,7 +26,6 @@
#include <linux/swap.h>
#include <linux/writeback.h>
#include <linux/task_io_accounting_ops.h>
#include <linux/blktrace_api.h>
#include <linux/fault-inject.h>
#define CREATE_TRACE_POINTS
......@@ -498,6 +497,11 @@ struct request_queue *blk_alloc_queue_node(gfp_t gfp_mask, int node_id)
q->backing_dev_info.unplug_io_fn = blk_backing_dev_unplug;
q->backing_dev_info.unplug_io_data = q;
q->backing_dev_info.ra_pages =
(VM_MAX_READAHEAD * 1024) / PAGE_CACHE_SIZE;
q->backing_dev_info.state = 0;
q->backing_dev_info.capabilities = BDI_CAP_MAP_COPY;
err = bdi_init(&q->backing_dev_info);
if (err) {
kmem_cache_free(blk_requestq_cachep, q);
......
......@@ -95,6 +95,31 @@ void blk_queue_lld_busy(struct request_queue *q, lld_busy_fn *fn)
}
EXPORT_SYMBOL_GPL(blk_queue_lld_busy);
/**
* blk_set_default_limits - reset limits to default values
* @limits: the queue_limits structure to reset
*
* Description:
* Returns a queue_limit struct to its default state. Can be used by
* stacking drivers like DM that stage table swaps and reuse an
* existing device queue.
*/
void blk_set_default_limits(struct queue_limits *lim)
{
lim->max_phys_segments = MAX_PHYS_SEGMENTS;
lim->max_hw_segments = MAX_HW_SEGMENTS;
lim->seg_boundary_mask = BLK_SEG_BOUNDARY_MASK;
lim->max_segment_size = MAX_SEGMENT_SIZE;
lim->max_sectors = lim->max_hw_sectors = SAFE_MAX_SECTORS;
lim->logical_block_size = lim->physical_block_size = lim->io_min = 512;
lim->bounce_pfn = BLK_BOUNCE_ANY;
lim->alignment_offset = 0;
lim->io_opt = 0;
lim->misaligned = 0;
lim->no_cluster = 0;
}
EXPORT_SYMBOL(blk_set_default_limits);
/**
* blk_queue_make_request - define an alternate make_request function for a device
* @q: the request queue for the device to be affected
......@@ -123,18 +148,8 @@ void blk_queue_make_request(struct request_queue *q, make_request_fn *mfn)
* set defaults
*/
q->nr_requests = BLKDEV_MAX_RQ;
blk_queue_max_phys_segments(q, MAX_PHYS_SEGMENTS);
blk_queue_max_hw_segments(q, MAX_HW_SEGMENTS);
blk_queue_segment_boundary(q, BLK_SEG_BOUNDARY_MASK);
blk_queue_max_segment_size(q, MAX_SEGMENT_SIZE);
q->make_request_fn = mfn;
q->backing_dev_info.ra_pages =
(VM_MAX_READAHEAD * 1024) / PAGE_CACHE_SIZE;
q->backing_dev_info.state = 0;
q->backing_dev_info.capabilities = BDI_CAP_MAP_COPY;
blk_queue_max_sectors(q, SAFE_MAX_SECTORS);
blk_queue_logical_block_size(q, 512);
blk_queue_dma_alignment(q, 511);
blk_queue_congestion_threshold(q);
q->nr_batching = BLK_BATCH_REQ;
......@@ -147,6 +162,8 @@ void blk_queue_make_request(struct request_queue *q, make_request_fn *mfn)
q->unplug_timer.function = blk_unplug_timeout;
q->unplug_timer.data = (unsigned long)q;
blk_set_default_limits(&q->limits);
/*
* by default assume old behaviour and bounce for any highmem page
*/
......
......@@ -122,7 +122,6 @@ struct cfq_data {
struct cfq_queue *async_idle_cfqq;
sector_t last_position;
unsigned long last_end_request;
/*
* tunables, see top of file
......@@ -1253,7 +1252,7 @@ static int cfq_forced_dispatch(struct cfq_data *cfqd)
BUG_ON(cfqd->busy_queues);
cfq_log(cfqd, "forced_dispatch=%d\n", dispatched);
cfq_log(cfqd, "forced_dispatch=%d", dispatched);
return dispatched;
}
......@@ -2164,9 +2163,6 @@ static void cfq_completed_request(struct request_queue *q, struct request *rq)
if (cfq_cfqq_sync(cfqq))
cfqd->sync_flight--;
if (!cfq_class_idle(cfqq))
cfqd->last_end_request = now;
if (sync)
RQ_CIC(rq)->last_end_request = now;
......@@ -2479,7 +2475,6 @@ static void *cfq_init_queue(struct request_queue *q)
INIT_WORK(&cfqd->unplug_work, cfq_kick_queue);
cfqd->last_end_request = jiffies;
cfqd->cfq_quantum = cfq_quantum;
cfqd->cfq_fifo_expire[0] = cfq_fifo_expire[0];
cfqd->cfq_fifo_expire[1] = cfq_fifo_expire[1];
......
......@@ -38,7 +38,6 @@
#include <linux/hdreg.h>
#include <linux/spinlock.h>
#include <linux/compat.h>
#include <linux/blktrace_api.h>
#include <asm/uaccess.h>
#include <asm/io.h>
......
......@@ -22,13 +22,12 @@
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/mg_disk.h>
#define MG_RES_SEC (CONFIG_MG_DISK_RES << 1)
/* name for block device */
#define MG_DISK_NAME "mgd"
/* name for platform device */
#define MG_DEV_NAME "mg_disk"
#define MG_DISK_MAJ 0
#define MG_DISK_MAX_PART 16
......@@ -103,33 +102,8 @@
#define MG_TMAX_SWRST_TO_RDY 500
#define MG_TMAX_RSTOUT 3000
/* device attribution */
/* use mflash as boot device */
#define MG_BOOT_DEV (1 << 0)
/* use mflash as storage device */
#define MG_STORAGE_DEV (1 << 1)
/* same as MG_STORAGE_DEV, but bootloader already done reset sequence */
#define MG_STORAGE_DEV_SKIP_RST (1 << 2)
#define MG_DEV_MASK (MG_BOOT_DEV | MG_STORAGE_DEV | MG_STORAGE_DEV_SKIP_RST)
/* names of GPIO resource */
#define MG_RST_PIN "mg_rst"
/* except MG_BOOT_DEV, reset-out pin should be assigned */
#define MG_RSTOUT_PIN "mg_rstout"
/* private driver data */
struct mg_drv_data {
/* disk resource */
u32 use_polling;
/* device attribution */
u32 dev_attr;
/* internally used */
struct mg_host *host;
};
/* main structure for mflash driver */
struct mg_host {
struct device *dev;
......
......@@ -19,7 +19,6 @@
#include <linux/slab.h>
#include <linux/idr.h>
#include <linux/hdreg.h>
#include <linux/blktrace_api.h>
#include <trace/events/block.h>
......
......@@ -25,7 +25,6 @@
#include <linux/module.h>
#include <linux/mempool.h>
#include <linux/workqueue.h>
#include <linux/blktrace_api.h>
#include <scsi/sg.h> /* for struct sg_iovec */
#include <trace/events/block.h>
......
......@@ -42,6 +42,8 @@
static struct extent_io_ops btree_extent_io_ops;
static void end_workqueue_fn(struct btrfs_work *work);
static atomic_t btrfs_bdi_num = ATOMIC_INIT(0);
/*
* end_io_wq structs are used to do processing in task context when an IO is
* complete. This is used during reads to verify checksums, and it is used
......@@ -1342,12 +1344,25 @@ static void btrfs_unplug_io_fn(struct backing_dev_info *bdi, struct page *page)
free_extent_map(em);
}
/*
* If this fails, caller must call bdi_destroy() to get rid of the
* bdi again.
*/
static int setup_bdi(struct btrfs_fs_info *info, struct backing_dev_info *bdi)
{
bdi_init(bdi);
int err;
bdi->capabilities = BDI_CAP_MAP_COPY;
err = bdi_init(bdi);
if (err)
return err;
err = bdi_register(bdi, NULL, "btrfs-%d",
atomic_inc_return(&btrfs_bdi_num));
if (err)
return err;
bdi->ra_pages = default_backing_dev_info.ra_pages;
bdi->state = 0;
bdi->capabilities = default_backing_dev_info.capabilities;
bdi->unplug_io_fn = btrfs_unplug_io_fn;
bdi->unplug_io_data = info;
bdi->congested_fn = btrfs_congested_fn;
......@@ -1569,7 +1584,8 @@ struct btrfs_root *open_ctree(struct super_block *sb,
fs_info->sb = sb;
fs_info->max_extent = (u64)-1;
fs_info->max_inline = 8192 * 1024;
setup_bdi(fs_info, &fs_info->bdi);
if (setup_bdi(fs_info, &fs_info->bdi))
goto fail_bdi;
fs_info->btree_inode = new_inode(sb);
fs_info->btree_inode->i_ino = 1;
fs_info->btree_inode->i_nlink = 1;
......@@ -1946,8 +1962,8 @@ struct btrfs_root *open_ctree(struct super_block *sb,
btrfs_close_devices(fs_info->fs_devices);
btrfs_mapping_tree_free(&fs_info->mapping_tree);
fail_bdi:
bdi_destroy(&fs_info->bdi);
fail:
kfree(extent_root);
kfree(tree_root);
......
......@@ -1937,6 +1937,9 @@ static int ubifs_fill_super(struct super_block *sb, void *data, int silent)
err = bdi_init(&c->bdi);
if (err)
goto out_close;
err = bdi_register(&c->bdi, NULL, "ubifs");
if (err)
goto out_bdi;
err = ubifs_parse_options(c, data, 0);
if (err)
......
......@@ -926,6 +926,7 @@ extern void blk_queue_alignment_offset(struct request_queue *q,
unsigned int alignment);
extern void blk_queue_io_min(struct request_queue *q, unsigned int min);
extern void blk_queue_io_opt(struct request_queue *q, unsigned int opt);
extern void blk_set_default_limits(struct queue_limits *lim);
extern int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
sector_t offset);
extern void disk_stack_limits(struct gendisk *disk, struct block_device *bdev,
......
/*
* include/linux/mg_disk.c
*
* Private data for mflash platform driver
*
* (c) 2008 mGine Co.,LTD
* (c) 2008 unsik Kim <donari75@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __MG_DISK_H__
#define __MG_DISK_H__
/* name for platform device */
#define MG_DEV_NAME "mg_disk"
/* names of GPIO resource */
#define MG_RST_PIN "mg_rst"
/* except MG_BOOT_DEV, reset-out pin should be assigned */
#define MG_RSTOUT_PIN "mg_rstout"
/* device attribution */
/* use mflash as boot device */
#define MG_BOOT_DEV (1 << 0)
/* use mflash as storage device */
#define MG_STORAGE_DEV (1 << 1)
/* same as MG_STORAGE_DEV, but bootloader already done reset sequence */
#define MG_STORAGE_DEV_SKIP_RST (1 << 2)
/* private driver data */
struct mg_drv_data {
/* disk resource */
u32 use_polling;
/* device attribution */
u32 dev_attr;
/* internally used */
void *host;
};
#endif
......@@ -13,7 +13,6 @@
#include <linux/init.h>
#include <linux/hash.h>
#include <linux/highmem.h>
#include <linux/blktrace_api.h>
#include <asm/tlbflush.h>
#include <trace/events/block.h>
......
......@@ -26,7 +26,6 @@
#include <linux/init.h>
#include <linux/hash.h>
#include <linux/highmem.h>
#include <linux/blktrace_api.h>
#include <asm/tlbflush.h>
/*
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment