Merge branches 'for-4.3/upstream-fixes', 'for-4.4/corsair',...

Merge branches 'for-4.3/upstream-fixes', 'for-4.4/corsair', 'for-4.4/dragonrise', 'for-4.4/i2c-hid', 'for-4.4/logitech', 'for-4.4/microsoft', 'for-4.4/multitouch', 'for-4.4/roccat-sysfs-deprecation', 'for-4.4/upstream' and 'for-4.4/wacom' into for-linus

Documentation/ABI/obsolete/sysfs-driver-hid-roccat-koneplus

+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/actual_profile
+Date:		October 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 0-4.
+                When read, this attribute returns the number of the actual
+                profile. This value is persistent, so its equivalent to the
+                profile that's active when the mouse is powered on next time.
+		When written, this file sets the number of the startup profile
+		and the mouse activates this profile immediately.
+Users:		http://roccat.sourceforge.net
+
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/startup_profile
 Date:		October 2010
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
@@ -22,6 +33,40 @@ Description:	When read, this file returns the raw integer version number of the
 		Please read binary attribute info which contains firmware version.
 Users:		http://roccat.sourceforge.net
 
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/info
+Date:		November 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns general data like firmware version.
+		When written, the device can be reset.
+		The data is 8 bytes long.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/macro
+Date:		October 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store a macro with max 500 key/button strokes
+		internally.
+		When written, this file lets one set the sequence for a specific
+		button for a specific profile. Button and profile numbers are
+		included in written data. The data has to be 2082 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile_buttons
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_buttons holds information about button layout.
+		When written, this file lets one write the respective profile
+		buttons back to the mouse. The data has to be 77 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile[1-5]_buttons
 Date:		August 2010
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
@@ -34,6 +79,22 @@ Description:	The mouse can store 5 profiles which can be switched by the
 		Write control to select profile and read profile_buttons instead.
 Users:		http://roccat.sourceforge.net
 
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile_settings
+Date:		October 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_settings holds information like resolution, sensitivity
+		and light effects.
+		When written, this file lets one write the respective profile
+		settings back to the mouse. The data has to be 43 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile[1-5]_settings
 Date:		August 2010
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
@@ -45,4 +106,40 @@ Description:	The mouse can store 5 profiles which can be switched by the
 		The returned data is 43 bytes in size.
 		This file is readonly.
 		Write control to select profile and read profile_settings instead.
-Users:		http://roccat.sourceforge.net
\ No newline at end of file
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/sensor
+Date:		October 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse has a tracking- and a distance-control-unit. These
+		can be activated/deactivated and the lift-off distance can be
+		set. The data has to be 6 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/talk
+Date:		May 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	Used to active some easy* functions of the mouse from outside.
+		The data has to be 16 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/tcu
+Date:		October 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written a calibration process for the tracking control unit
+		can be initiated/cancelled. Also lets one read/write sensor
+		registers.
+		The data has to be 4 bytes long.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/tcu_image
+Date:		October 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read the mouse returns a 30x30 pixel image of the
+		sampled underground. This works only in the course of a
+		calibration process initiated with tcu.
+		The returned data is 1028 bytes in size.
+		This file is readonly.
+Users:		http://roccat.sourceforge.net

Documentation/ABI/obsolete/sysfs-driver-hid-roccat-kovaplus

@@ -8,6 +8,17 @@ Description:	The integer value of this attribute ranges from 1-4.
 		Has never been used. If bookkeeping is done, it's done in userland tools.
 Users:		http://roccat.sourceforge.net
 
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_profile
+Date:		January 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 0-4.
+		When read, this attribute returns the number of the active
+		profile.
+		When written, the mouse activates this profile immediately.
+		The profile that's active when powered down is the same that's
+		active when the mouse is powered on.
+Users:		http://roccat.sourceforge.net
+
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_sensitivity_x
 Date:		January 2011
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
@@ -40,6 +51,29 @@ Description:	When read, this file returns the raw integer version number of the
 		Obsoleted by binary sysfs attribute "info".
 Users:		http://roccat.sourceforge.net
 
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/info
+Date:		November 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns general data like firmware version.
+		When written, the device can be reset.
+		The data is 6 bytes long.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile_buttons
+Date:		January 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_buttons holds information about button layout.
+		When written, this file lets one write the respective profile
+		buttons back to the mouse. The data has to be 23 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile[1-5]_buttons
 Date:		January 2011
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
@@ -52,6 +86,22 @@ Description:	The mouse can store 5 profiles which can be switched by the
 		Write control to select profile and read profile_buttons instead.
 Users:		http://roccat.sourceforge.net
 
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile_settings
+Date:		January 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_settings holds information like resolution, sensitivity
+		and light effects.
+		When written, this file lets one write the respective profile
+		settings back to the mouse. The data has to be 16 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile[1-5]_settings
 Date:		January 2011
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>

Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra

@@ -37,6 +37,29 @@ Description:	When read, this file returns the raw integer version number of the
 		Please use binary attribute "info" which provides this information.
 Users:		http://roccat.sourceforge.net
 
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/info
+Date:		November 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns general data like firmware version.
+		When written, the device can be reset.
+		The data is 6 bytes long.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile_buttons
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_buttons holds information about button layout.
+		When written, this file lets one write the respective profile
+		buttons back to the mouse. The data has to be 19 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile[1-5]_buttons
 Date:		August 2010
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
@@ -49,6 +72,22 @@ Description:	The mouse can store 5 profiles which can be switched by the
 		Write control to select profile and read profile_buttons instead.
 Users:		http://roccat.sourceforge.net
 
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile_settings
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_settings holds information like resolution, sensitivity
+		and light effects.
+		When written, this file lets one write the respective profile
+		settings back to the mouse. The data has to be 13 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile[1-5]_settings
 Date:		August 2010
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
@@ -62,6 +101,17 @@ Description:	The mouse can store 5 profiles which can be switched by the
 		Write control to select profile and read profile_settings instead.
 Users:		http://roccat.sourceforge.net
 
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/settings
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns the settings stored in the mouse.
+		The size of the data is 3 bytes and holds information on the
+		startup_profile.
+		When written, this file lets write settings back to the mouse.
+		The data has to be 3 bytes long. The mouse will reject invalid
+		data.
+Users:		http://roccat.sourceforge.net
+
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/startup_profile
 Date:		August 2010
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>

Documentation/ABI/testing/sysfs-driver-hid-corsair

+What:		/sys/bus/drivers/corsair/<dev>/macro_mode
+Date:		August 2015
+KernelVersion:	4.2
+Contact:	Clement Vuchener <clement.vuchener@gmail.com>
+Description:	Get/set the current playback mode. "SW" for software mode
+		where G-keys triggers their regular key codes. "HW" for
+		hardware playback mode where the G-keys play their macro
+		from the on-board memory.
+
+
+What:		/sys/bus/drivers/corsair/<dev>/current_profile
+Date:		August 2015
+KernelVersion:	4.2
+Contact:	Clement Vuchener <clement.vuchener@gmail.com>
+Description:	Get/set the current selected profile. Values are from 1 to 3.

Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus

-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/actual_profile
-Date:		October 2010
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	The integer value of this attribute ranges from 0-4.
-                When read, this attribute returns the number of the actual
-                profile. This value is persistent, so its equivalent to the
-                profile that's active when the mouse is powered on next time.
-		When written, this file sets the number of the startup profile
-		and the mouse activates this profile immediately.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/info
-Date:		November 2012
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	When read, this file returns general data like firmware version.
-		When written, the device can be reset.
-		The data is 8 bytes long.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/macro
-Date:		October 2010
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	The mouse can store a macro with max 500 key/button strokes
-		internally.
-		When written, this file lets one set the sequence for a specific
-		button for a specific profile. Button and profile numbers are
-		included in written data. The data has to be 2082 bytes long.
-		This file is writeonly.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile_buttons
-Date:		August 2010
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	The mouse can store 5 profiles which can be switched by the
-		press of a button. A profile is split in settings and buttons.
-		profile_buttons holds information about button layout.
-		When written, this file lets one write the respective profile
-		buttons back to the mouse. The data has to be 77 bytes long.
-		The mouse will reject invalid data.
-		Which profile to write is determined by the profile number
-		contained in the data.
-		Before reading this file, control has to be written to select
-		which profile to read.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile_settings
-Date:		October 2010
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	The mouse can store 5 profiles which can be switched by the
-		press of a button. A profile is split in settings and buttons.
-		profile_settings holds information like resolution, sensitivity
-		and light effects.
-		When written, this file lets one write the respective profile
-		settings back to the mouse. The data has to be 43 bytes long.
-		The mouse will reject invalid data.
-		Which profile to write is determined by the profile number
-		contained in the data.
-		Before reading this file, control has to be written to select
-		which profile to read.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/sensor
-Date:		October 2010
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	The mouse has a tracking- and a distance-control-unit. These
-		can be activated/deactivated and the lift-off distance can be
-		set. The data has to be 6 bytes long.
-		This file is writeonly.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/talk
-Date:		May 2011
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	Used to active some easy* functions of the mouse from outside.
-		The data has to be 16 bytes long.
-		This file is writeonly.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/tcu
-Date:		October 2010
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	When written a calibration process for the tracking control unit
-		can be initiated/cancelled. Also lets one read/write sensor
-		registers.
-		The data has to be 4 bytes long.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/tcu_image
-Date:		October 2010
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	When read the mouse returns a 30x30 pixel image of the
-		sampled underground. This works only in the course of a
-		calibration process initiated with tcu.
-		The returned data is 1028 bytes in size.
-		This file is readonly.
-Users:		http://roccat.sourceforge.net

Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus

-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_profile
-Date:		January 2011
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	The integer value of this attribute ranges from 0-4.
-		When read, this attribute returns the number of the active
-		profile.
-		When written, the mouse activates this profile immediately.
-		The profile that's active when powered down is the same that's
-		active when the mouse is powered on.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/info
-Date:		November 2012
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	When read, this file returns general data like firmware version.
-		When written, the device can be reset.
-		The data is 6 bytes long.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile_buttons
-Date:		January 2011
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	The mouse can store 5 profiles which can be switched by the
-		press of a button. A profile is split in settings and buttons.
-		profile_buttons holds information about button layout.
-		When written, this file lets one write the respective profile
-		buttons back to the mouse. The data has to be 23 bytes long.
-		The mouse will reject invalid data.
-		Which profile to write is determined by the profile number
-		contained in the data.
-		Before reading this file, control has to be written to select
-		which profile to read.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile_settings
-Date:		January 2011
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	The mouse can store 5 profiles which can be switched by the
-		press of a button. A profile is split in settings and buttons.
-		profile_settings holds information like resolution, sensitivity
-		and light effects.
-		When written, this file lets one write the respective profile
-		settings back to the mouse. The data has to be 16 bytes long.
-		The mouse will reject invalid data.
-		Which profile to write is determined by the profile number
-		contained in the data.
-		Before reading this file, control has to be written to select
-		which profile to read.
-Users:		http://roccat.sourceforge.net

Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra

-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/info
-Date:		November 2012
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	When read, this file returns general data like firmware version.
-		When written, the device can be reset.
-		The data is 6 bytes long.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile_settings
-Date:		August 2010
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	The mouse can store 5 profiles which can be switched by the
-		press of a button. A profile is split in settings and buttons.
-		profile_settings holds information like resolution, sensitivity
-		and light effects.
-		When written, this file lets one write the respective profile
-		settings back to the mouse. The data has to be 13 bytes long.
-		The mouse will reject invalid data.
-		Which profile to write is determined by the profile number
-		contained in the data.
-		Before reading this file, control has to be written to select
-		which profile to read.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile_buttons
-Date:		August 2010
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	The mouse can store 5 profiles which can be switched by the
-		press of a button. A profile is split in settings and buttons.
-		profile_buttons holds information about button layout.
-		When written, this file lets one write the respective profile
-		buttons back to the mouse. The data has to be 19 bytes long.
-		The mouse will reject invalid data.
-		Which profile to write is determined by the profile number
-		contained in the data.
-		Before reading this file, control has to be written to select
-		which profile to read.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/settings
-Date:		August 2010
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	When read, this file returns the settings stored in the mouse.
-		The size of the data is 3 bytes and holds information on the
-		startup_profile.
-		When written, this file lets write settings back to the mouse.
-		The data has to be 3 bytes long. The mouse will reject invalid
-		data.
-Users:		http://roccat.sourceforge.net

drivers/hid/Kconfig

@@ -171,6 +171,16 @@ config HID_CHICONY
 	---help---
 	Support for Chicony Tactical pad.
 
+config HID_CORSAIR
+	tristate "Corsair devices"
+	depends on HID && USB && LEDS_CLASS
+	---help---
+	Support for Corsair devices that are not fully compliant with the
+	HID standard.
+
+	Supported devices:
+	- Vengeance K90
+
 config HID_PRODIKEYS
 	tristate "Prodikeys PC-MIDI Keyboard support"
 	depends on HID && SND
@@ -672,9 +682,8 @@ config HID_SAITEK
 
 	Supported devices:
 	- PS1000 Dual Analog Pad
-	- R.A.T.9 Gaming Mouse
-	- R.A.T.7 Gaming Mouse
-	- M.M.O.7 Gaming Mouse
+	- Saitek R.A.T.7, R.A.T.9, M.M.O.7 Gaming Mice
+	- Mad Catz R.A.T.5, R.A.T.9 Gaming Mice
 
 config HID_SAMSUNG
 	tristate "Samsung InfraRed remote control or keyboards"

drivers/hid/Makefile

@@ -29,6 +29,7 @@ obj-$(CONFIG_HID_BELKIN)	+= hid-belkin.o
 obj-$(CONFIG_HID_BETOP_FF)	+= hid-betopff.o
 obj-$(CONFIG_HID_CHERRY)	+= hid-cherry.o
 obj-$(CONFIG_HID_CHICONY)	+= hid-chicony.o
+obj-$(CONFIG_HID_CORSAIR)	+= hid-corsair.o
 obj-$(CONFIG_HID_CP2112)	+= hid-cp2112.o
 obj-$(CONFIG_HID_CYPRESS)	+= hid-cypress.o
 obj-$(CONFIG_HID_DRAGONRISE)	+= hid-dr.o

drivers/hid/hid-appleir.c

@@ -256,7 +256,7 @@ static int appleir_raw_event(struct hid_device *hid, struct hid_report *report,
 	return 0;
 }
 
-static void appleir_input_configured(struct hid_device *hid,
+static int appleir_input_configured(struct hid_device *hid,
 		struct hid_input *hidinput)
 {
 	struct input_dev *input_dev = hidinput->input;
@@ -275,6 +275,8 @@ static void appleir_input_configured(struct hid_device *hid,
 	for (i = 0; i < ARRAY_SIZE(appleir_key_table); i++)
 		set_bit(appleir->keymap[i], input_dev->keybit);
 	clear_bit(KEY_RESERVED, input_dev->keybit);
+
+	return 0;
 }
 
 static int appleir_input_mapping(struct hid_device *hid,

drivers/hid/hid-aureal.c

@@ -23,7 +23,8 @@ static __u8 *aureal_report_fixup(struct hid_device *hdev, __u8 *rdesc,
 	if (*rsize >= 54 && rdesc[52] == 0x25 && rdesc[53] == 0x01) {
 		dev_info(&hdev->dev, "fixing Aureal Cy se W-01RN USB_V3.1 report descriptor.\n");
 		rdesc[53] = 0x65;
-	} return rdesc;
+	}
+	return rdesc;
 }
 
 static const struct hid_device_id aureal_devices[] = {

drivers/hid/hid-core.c

@@ -725,6 +725,7 @@ static void hid_scan_collection(struct hid_parser *parser, unsigned type)
 
 	if (hid->vendor == USB_VENDOR_ID_MICROSOFT &&
 	    (hid->product == USB_DEVICE_ID_MS_TYPE_COVER_PRO_3 ||
+	     hid->product == USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_2 ||
 	     hid->product == USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_JP ||
 	     hid->product == USB_DEVICE_ID_MS_TYPE_COVER_3 ||
 	     hid->product == USB_DEVICE_ID_MS_POWER_COVER) &&
@@ -1678,6 +1679,9 @@ int hid_connect(struct hid_device *hdev, unsigned int connect_mask)
 	case BUS_BLUETOOTH:
 		bus = "BLUETOOTH";
 		break;
+	case BUS_I2C:
+		bus = "I2C";
+		break;
 	default:
 		bus = "<UNKNOWN>";
 	}
@@ -1828,6 +1832,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_AK1D) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_ACER_SWITCH12) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_CORSAIR, USB_DEVICE_ID_CORSAIR_K90) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_PRODIKEYS_PCMIDI) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_CP2112) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_1) },
@@ -1896,6 +1901,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD_CORD) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2_2) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G29_WHEEL) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WINGMAN_F3D) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WINGMAN_FFG ) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_FORCE3D_PRO) },
@@ -1928,6 +1934,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_WIRELESS_OPTICAL_DESKTOP_3_0) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_OFFICE_KB) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_JP) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_3) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_POWER_COVER) },
@@ -1981,6 +1988,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_RAT7_OLD) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_RAT7) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_MMO7) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_MADCATZ, USB_DEVICE_ID_MADCATZ_RAT5) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MADCATZ, USB_DEVICE_ID_MADCATZ_RAT9) },
 #endif
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_IR_REMOTE) },

drivers/hid/hid-dr.c

@@ -234,6 +234,58 @@ static __u8 pid0011_rdesc_fixed[] = {
 	0xC0                /*  End Collection                  */
 };
 
+static __u8 pid0006_rdesc_fixed[] = {
+	0x05, 0x01,        /* Usage Page (Generic Desktop)	*/
+	0x09, 0x04,        /* Usage (Joystick)			*/
+	0xA1, 0x01,        /* Collection (Application)		*/
+	0xA1, 0x02,        /*   Collection (Logical)		*/
+	0x75, 0x08,        /*     Report Size (8)		*/
+	0x95, 0x05,        /*     Report Count (5)		*/
+	0x15, 0x00,        /*     Logical Minimum (0)		*/
+	0x26, 0xFF, 0x00,  /*     Logical Maximum (255)		*/
+	0x35, 0x00,        /*     Physical Minimum (0)		*/
+	0x46, 0xFF, 0x00,  /*     Physical Maximum (255)	*/
+	0x09, 0x30,        /*     Usage (X)			*/
+	0x09, 0x33,        /*     Usage (Ry)			*/
+	0x09, 0x32,        /*     Usage (Z)			*/
+	0x09, 0x31,        /*     Usage (Y)			*/
+	0x09, 0x34,        /*     Usage (Ry)			*/
+	0x81, 0x02,        /*     Input (Variable)		*/
+	0x75, 0x04,        /*     Report Size (4)		*/
+	0x95, 0x01,        /*     Report Count (1)		*/
+	0x25, 0x07,        /*     Logical Maximum (7)		*/
+	0x46, 0x3B, 0x01,  /*     Physical Maximum (315)	*/
+	0x65, 0x14,        /*     Unit (Centimeter)		*/
+	0x09, 0x39,        /*     Usage (Hat switch)		*/
+	0x81, 0x42,        /*     Input (Variable)		*/
+	0x65, 0x00,        /*     Unit (None)			*/
+	0x75, 0x01,        /*     Report Size (1)		*/
+	0x95, 0x0C,        /*     Report Count (12)		*/
+	0x25, 0x01,        /*     Logical Maximum (1)		*/
+	0x45, 0x01,        /*     Physical Maximum (1)		*/
+	0x05, 0x09,        /*     Usage Page (Button)		*/
+	0x19, 0x01,        /*     Usage Minimum (0x01)		*/
+	0x29, 0x0C,        /*     Usage Maximum (0x0C)		*/
+	0x81, 0x02,        /*     Input (Variable)		*/
+	0x06, 0x00, 0xFF,  /*     Usage Page (Vendor Defined)	*/
+	0x75, 0x01,        /*     Report Size (1)		*/
+	0x95, 0x08,        /*     Report Count (8)		*/
+	0x25, 0x01,        /*     Logical Maximum (1)		*/
+	0x45, 0x01,        /*     Physical Maximum (1)		*/
+	0x09, 0x01,        /*     Usage (0x01)			*/
+	0x81, 0x02,        /*     Input (Variable)		*/
+	0xC0,              /*   End Collection			*/
+	0xA1, 0x02,        /*   Collection (Logical)		*/
+	0x75, 0x08,        /*     Report Size (8)		*/
+	0x95, 0x07,        /*     Report Count (7)		*/
+	0x46, 0xFF, 0x00,  /*     Physical Maximum (255)	*/
+	0x26, 0xFF, 0x00,  /*     Logical Maximum (255)		*/
+	0x09, 0x02,        /*     Usage (0x02)			*/
+	0x91, 0x02,        /*     Output (Variable)		*/
+	0xC0,              /*   End Collection			*/
+	0xC0               /* End Collection			*/
+};
+
 static __u8 *dr_report_fixup(struct hid_device *hdev, __u8 *rdesc,
 				unsigned int *rsize)
 {
@@ -244,6 +296,12 @@ static __u8 *dr_report_fixup(struct hid_device *hdev, __u8 *rdesc,
 			*rsize = sizeof(pid0011_rdesc_fixed);
 		}
 		break;
+	case 0x0006:
+		if (*rsize == sizeof(pid0006_rdesc_fixed)) {
+			rdesc = pid0006_rdesc_fixed;
+			*rsize = sizeof(pid0006_rdesc_fixed);
+		}
+		break;
 	}
 	return rdesc;
 }

drivers/hid/hid-elecom.c

@@ -27,7 +27,7 @@ static __u8 *elecom_report_fixup(struct hid_device *hdev, __u8 *rdesc,
 		hid_info(hdev, "Fixing up Elecom BM084 report descriptor\n");
 		rdesc[47] = 0x00;
 	}
-    return rdesc;
+	return rdesc;
 }
 
 static const struct hid_device_id elecom_devices[] = {

drivers/hid/hid-elo.c

@@ -37,7 +37,7 @@ static bool use_fw_quirk = true;
 module_param(use_fw_quirk, bool, S_IRUGO);
 MODULE_PARM_DESC(use_fw_quirk, "Do periodic pokes for broken M firmwares (default = true)");
 
-static void elo_input_configured(struct hid_device *hdev,
+static int elo_input_configured(struct hid_device *hdev,
 		struct hid_input *hidinput)
 {
 	struct input_dev *input = hidinput->input;
@@ -45,6 +45,8 @@ static void elo_input_configured(struct hid_device *hdev,
 	set_bit(BTN_TOUCH, input->keybit);
 	set_bit(ABS_PRESSURE, input->absbit);
 	input_set_abs_params(input, ABS_PRESSURE, 0, 256, 0, 0);
+
+	return 0;
 }
 
 static void elo_process_data(struct input_dev *input, const u8 *data, int size)

drivers/hid/hid-ids.h

@@ -251,6 +251,9 @@
 #define USB_DEVICE_ID_CODEMERCS_IOW_FIRST	0x1500
 #define USB_DEVICE_ID_CODEMERCS_IOW_LAST	0x15ff
 
+#define USB_VENDOR_ID_CORSAIR		0x1b1c
+#define USB_DEVICE_ID_CORSAIR_K90	0x1b02
+
 #define USB_VENDOR_ID_CREATIVELABS	0x041e
 #define USB_DEVICE_ID_PRODIKEYS_PCMIDI	0x2801
 
@@ -648,6 +651,7 @@
 
 #define USB_VENDOR_ID_MADCATZ		0x0738
 #define USB_DEVICE_ID_MADCATZ_BEATPAD	0x4540
+#define USB_DEVICE_ID_MADCATZ_RAT5	0x1705
 #define USB_DEVICE_ID_MADCATZ_RAT9	0x1709
 
 #define USB_VENDOR_ID_MCC		0x09db
@@ -681,6 +685,7 @@
 #define USB_DEVICE_ID_MS_TOUCH_COVER_2   0x07a7
 #define USB_DEVICE_ID_MS_TYPE_COVER_2    0x07a9
 #define USB_DEVICE_ID_MS_TYPE_COVER_PRO_3    0x07dc
+#define USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_2  0x07e2
 #define USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_JP 0x07dd
 #define USB_DEVICE_ID_MS_TYPE_COVER_3    0x07de
 #define USB_DEVICE_ID_MS_POWER_COVER     0x07da

drivers/hid/hid-input.c

@@ -1510,8 +1510,9 @@ int hidinput_connect(struct hid_device *hid, unsigned int force)
 				 * UGCI) cram a lot of unrelated inputs into the
 				 * same interface. */
 				hidinput->report = report;
-				if (drv->input_configured)
-					drv->input_configured(hid, hidinput);
+				if (drv->input_configured &&
+				    drv->input_configured(hid, hidinput))
+					goto out_cleanup;
 				if (input_register_device(hidinput->input))
 					goto out_cleanup;
 				hidinput = NULL;
@@ -1532,8 +1533,9 @@ int hidinput_connect(struct hid_device *hid, unsigned int force)
 	}
 
 	if (hidinput) {
-		if (drv->input_configured)
-			drv->input_configured(hid, hidinput);
+		if (drv->input_configured &&
+		    drv->input_configured(hid, hidinput))
+			goto out_cleanup;
 		if (input_register_device(hidinput->input))
 			goto out_cleanup;
 	}

drivers/hid/hid-lenovo.c

@@ -848,7 +848,7 @@ static void lenovo_remove(struct hid_device *hdev)
 	hid_hw_stop(hdev);
 }
 
-static void lenovo_input_configured(struct hid_device *hdev,
+static int lenovo_input_configured(struct hid_device *hdev,
 		struct hid_input *hi)
 {
 	switch (hdev->product) {
@@ -863,6 +863,8 @@ static void lenovo_input_configured(struct hid_device *hdev,
 			}
 			break;
 	}
+
+	return 0;
 }
 
 

drivers/hid/hid-lg.c

@@ -620,6 +620,7 @@ static int lg_input_mapped(struct hid_device *hdev, struct hid_input *hi,
 			usage->code == ABS_Y || usage->code == ABS_Z ||
 			usage->code == ABS_RZ)) {
 		switch (hdev->product) {
+		case USB_DEVICE_ID_LOGITECH_G29_WHEEL:
 		case USB_DEVICE_ID_LOGITECH_WHEEL:
 		case USB_DEVICE_ID_LOGITECH_MOMO_WHEEL:
 		case USB_DEVICE_ID_LOGITECH_DFP_WHEEL:
@@ -658,10 +659,18 @@ static int lg_event(struct hid_device *hdev, struct hid_field *field,
 
 static int lg_probe(struct hid_device *hdev, const struct hid_device_id *id)
 {
+	struct usb_interface *iface = to_usb_interface(hdev->dev.parent);
+	__u8 iface_num = iface->cur_altsetting->desc.bInterfaceNumber;
 	unsigned int connect_mask = HID_CONNECT_DEFAULT;
 	struct lg_drv_data *drv_data;
 	int ret;
 
+	/* Only work with the 1st interface (G29 presents multiple) */
+	if (iface_num != 0) {
+		dbg_hid("%s: ignoring ifnum %d\n", __func__, iface_num);
+		return -ENODEV;
+	}
+
 	drv_data = kzalloc(sizeof(struct lg_drv_data), GFP_KERNEL);
 	if (!drv_data) {
 		hid_err(hdev, "Insufficient memory, cannot allocate driver data\n");

drivers/hid/hid-lg4ff.c

@@ -45,7 +45,8 @@
 #define LG4FF_MODE_G25_IDX 3
 #define LG4FF_MODE_DFGT_IDX 4
 #define LG4FF_MODE_G27_IDX 5
-#define LG4FF_MODE_MAX_IDX 6
+#define LG4FF_MODE_G29_IDX 6
+#define LG4FF_MODE_MAX_IDX 7
 
 #define LG4FF_MODE_NATIVE BIT(LG4FF_MODE_NATIVE_IDX)
 #define LG4FF_MODE_DFEX BIT(LG4FF_MODE_DFEX_IDX)
@@ -53,6 +54,7 @@
 #define LG4FF_MODE_G25 BIT(LG4FF_MODE_G25_IDX)
 #define LG4FF_MODE_DFGT BIT(LG4FF_MODE_DFGT_IDX)
 #define LG4FF_MODE_G27 BIT(LG4FF_MODE_G27_IDX)
+#define LG4FF_MODE_G29 BIT(LG4FF_MODE_G29_IDX)
 
 #define LG4FF_DFEX_TAG "DF-EX"
 #define LG4FF_DFEX_NAME "Driving Force / Formula EX"
@@ -62,6 +64,8 @@
 #define LG4FF_G25_NAME "G25 Racing Wheel"
 #define LG4FF_G27_TAG "G27"
 #define LG4FF_G27_NAME "G27 Racing Wheel"
+#define LG4FF_G29_TAG "G29"
+#define LG4FF_G29_NAME "G29 Racing Wheel"
 #define LG4FF_DFGT_TAG "DFGT"
 #define LG4FF_DFGT_NAME "Driving Force GT"
 
@@ -114,16 +118,12 @@ struct lg4ff_compat_mode_switch {
 };
 
 struct lg4ff_wheel_ident_info {
+	const u32 modes;
 	const u16 mask;
 	const u16 result;
 	const u16 real_product_id;
 };
 
-struct lg4ff_wheel_ident_checklist {
-	const u32 count;
-	const struct lg4ff_wheel_ident_info *models[];
-};
-
 struct lg4ff_multimode_wheel {
 	const u16 product_id;
 	const u32 alternate_modes;
@@ -144,6 +144,7 @@ static const struct lg4ff_wheel lg4ff_devices[] = {
 	{USB_DEVICE_ID_LOGITECH_G25_WHEEL,   lg4ff_wheel_effects, 40, 900, lg4ff_set_range_g25},
 	{USB_DEVICE_ID_LOGITECH_DFGT_WHEEL,  lg4ff_wheel_effects, 40, 900, lg4ff_set_range_g25},
 	{USB_DEVICE_ID_LOGITECH_G27_WHEEL,   lg4ff_wheel_effects, 40, 900, lg4ff_set_range_g25},
+	{USB_DEVICE_ID_LOGITECH_G29_WHEEL,   lg4ff_wheel_effects, 40, 900, lg4ff_set_range_g25},
 	{USB_DEVICE_ID_LOGITECH_MOMO_WHEEL2, lg4ff_wheel_effects, 40, 270, NULL},
 	{USB_DEVICE_ID_LOGITECH_WII_WHEEL,   lg4ff_wheel_effects, 40, 270, NULL}
 };
@@ -161,6 +162,9 @@ static const struct lg4ff_multimode_wheel lg4ff_multimode_wheels[] = {
 	{USB_DEVICE_ID_LOGITECH_G27_WHEEL,
 	 LG4FF_MODE_NATIVE | LG4FF_MODE_G27 | LG4FF_MODE_G25 | LG4FF_MODE_DFP | LG4FF_MODE_DFEX,
 	 LG4FF_G27_TAG, LG4FF_G27_NAME},
+	{USB_DEVICE_ID_LOGITECH_G29_WHEEL,
+	 LG4FF_MODE_NATIVE | LG4FF_MODE_G29 | LG4FF_MODE_G27 | LG4FF_MODE_G25 | LG4FF_MODE_DFGT | LG4FF_MODE_DFP | LG4FF_MODE_DFEX,
+	 LG4FF_G29_TAG, LG4FF_G29_NAME},
 };
 
 static const struct lg4ff_alternate_mode lg4ff_alternate_modes[] = {
@@ -169,41 +173,61 @@ static const struct lg4ff_alternate_mode lg4ff_alternate_modes[] = {
 	[LG4FF_MODE_DFP_IDX] = {USB_DEVICE_ID_LOGITECH_DFP_WHEEL, LG4FF_DFP_TAG, LG4FF_DFP_NAME},
 	[LG4FF_MODE_G25_IDX] = {USB_DEVICE_ID_LOGITECH_G25_WHEEL, LG4FF_G25_TAG, LG4FF_G25_NAME},
 	[LG4FF_MODE_DFGT_IDX] = {USB_DEVICE_ID_LOGITECH_DFGT_WHEEL, LG4FF_DFGT_TAG, LG4FF_DFGT_NAME},
-	[LG4FF_MODE_G27_IDX] = {USB_DEVICE_ID_LOGITECH_G27_WHEEL, LG4FF_G27_TAG, LG4FF_G27_NAME}
+	[LG4FF_MODE_G27_IDX] = {USB_DEVICE_ID_LOGITECH_G27_WHEEL, LG4FF_G27_TAG, LG4FF_G27_NAME},
+	[LG4FF_MODE_G29_IDX] = {USB_DEVICE_ID_LOGITECH_G29_WHEEL, LG4FF_G29_TAG, LG4FF_G29_NAME},
 };
 
 /* Multimode wheel identificators */
 static const struct lg4ff_wheel_ident_info lg4ff_dfp_ident_info = {
+	LG4FF_MODE_DFP | LG4FF_MODE_DFEX,
 	0xf000,
 	0x1000,
 	USB_DEVICE_ID_LOGITECH_DFP_WHEEL
 };
 
 static const struct lg4ff_wheel_ident_info lg4ff_g25_ident_info = {
+	LG4FF_MODE_G25 | LG4FF_MODE_DFP | LG4FF_MODE_DFEX,
 	0xff00,
 	0x1200,
 	USB_DEVICE_ID_LOGITECH_G25_WHEEL
 };
 
 static const struct lg4ff_wheel_ident_info lg4ff_g27_ident_info = {
+	LG4FF_MODE_G27 | LG4FF_MODE_G25 | LG4FF_MODE_DFP | LG4FF_MODE_DFEX,
 	0xfff0,
 	0x1230,
 	USB_DEVICE_ID_LOGITECH_G27_WHEEL
 };
 
 static const struct lg4ff_wheel_ident_info lg4ff_dfgt_ident_info = {
+	LG4FF_MODE_DFGT | LG4FF_MODE_DFP | LG4FF_MODE_DFEX,
 	0xff00,
 	0x1300,
 	USB_DEVICE_ID_LOGITECH_DFGT_WHEEL
 };
 
+static const struct lg4ff_wheel_ident_info lg4ff_g29_ident_info = {
+	LG4FF_MODE_G29 | LG4FF_MODE_G27 | LG4FF_MODE_G25 | LG4FF_MODE_DFGT | LG4FF_MODE_DFP | LG4FF_MODE_DFEX,
+	0xfff8,
+	0x1350,
+	USB_DEVICE_ID_LOGITECH_G29_WHEEL
+};
+
+static const struct lg4ff_wheel_ident_info lg4ff_g29_ident_info2 = {
+	LG4FF_MODE_G29 | LG4FF_MODE_G27 | LG4FF_MODE_G25 | LG4FF_MODE_DFGT | LG4FF_MODE_DFP | LG4FF_MODE_DFEX,
+	0xff00,
+	0x8900,
+	USB_DEVICE_ID_LOGITECH_G29_WHEEL
+};
+
 /* Multimode wheel identification checklists */
-static const struct lg4ff_wheel_ident_checklist lg4ff_main_checklist = {
-	4,
-	{&lg4ff_dfgt_ident_info,
-	 &lg4ff_g27_ident_info,
-	 &lg4ff_g25_ident_info,
-	 &lg4ff_dfp_ident_info}
+static const struct lg4ff_wheel_ident_info *lg4ff_main_checklist[] = {
+	&lg4ff_g29_ident_info,
+	&lg4ff_g29_ident_info2,
+	&lg4ff_dfgt_ident_info,
+	&lg4ff_g27_ident_info,
+	&lg4ff_g25_ident_info,
+	&lg4ff_dfp_ident_info
 };
 
 /* Compatibility mode switching commands */
@@ -238,6 +262,12 @@ static const struct lg4ff_compat_mode_switch lg4ff_mode_switch_ext09_g27 = {
 	 0xf8, 0x09, 0x04, 0x01, 0x00, 0x00, 0x00}	/* Switch mode to G27 with detach */
 };
 
+static const struct lg4ff_compat_mode_switch lg4ff_mode_switch_ext09_g29 = {
+	2,
+	{0xf8, 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00,	/* Revert mode upon USB reset */
+	 0xf8, 0x09, 0x05, 0x01, 0x01, 0x00, 0x00}	/* Switch mode to G29 with detach */
+};
+
 /* EXT_CMD1 - Understood by DFP, G25, G27 and DFGT */
 static const struct lg4ff_compat_mode_switch lg4ff_mode_switch_ext01_dfp = {
 	1,
@@ -651,6 +681,23 @@ static const struct lg4ff_compat_mode_switch *lg4ff_get_mode_switch_command(cons
 			return NULL;
 		}
 		break;
+	case USB_DEVICE_ID_LOGITECH_G29_WHEEL:
+		switch (target_product_id) {
+		case USB_DEVICE_ID_LOGITECH_DFP_WHEEL:
+			return &lg4ff_mode_switch_ext09_dfp;
+		case USB_DEVICE_ID_LOGITECH_DFGT_WHEEL:
+			return &lg4ff_mode_switch_ext09_dfgt;
+		case USB_DEVICE_ID_LOGITECH_G25_WHEEL:
+			return &lg4ff_mode_switch_ext09_g25;
+		case USB_DEVICE_ID_LOGITECH_G27_WHEEL:
+			return &lg4ff_mode_switch_ext09_g27;
+		case USB_DEVICE_ID_LOGITECH_G29_WHEEL:
+			return &lg4ff_mode_switch_ext09_g29;
+		/* G29 can only be switched to DF-EX, DFP, DFGT, G25, G27 or its native mode */
+		default:
+			return NULL;
+		}
+		break;
 	case USB_DEVICE_ID_LOGITECH_DFGT_WHEEL:
 		switch (target_product_id) {
 		case USB_DEVICE_ID_LOGITECH_WHEEL:
@@ -1037,41 +1084,28 @@ static enum led_brightness lg4ff_led_get_brightness(struct led_classdev *led_cde
 
 static u16 lg4ff_identify_multimode_wheel(struct hid_device *hid, const u16 reported_product_id, const u16 bcdDevice)
 {
-	const struct lg4ff_wheel_ident_checklist *checklist;
-	int i, from_idx, to_idx;
+	u32 current_mode;
+	int i;
 
-	switch (reported_product_id) {
-	case USB_DEVICE_ID_LOGITECH_WHEEL:
-	case USB_DEVICE_ID_LOGITECH_DFP_WHEEL:
-		checklist = &lg4ff_main_checklist;
-		from_idx = 0;
-		to_idx = checklist->count - 1;
-		break;
-	case USB_DEVICE_ID_LOGITECH_G25_WHEEL:
-		checklist = &lg4ff_main_checklist;
-		from_idx = 0;
-		to_idx = checklist->count - 2; /* End identity check at G25 */
-		break;
-	case USB_DEVICE_ID_LOGITECH_G27_WHEEL:
-		checklist = &lg4ff_main_checklist;
-		from_idx = 1; /* Start identity check at G27 */
-		to_idx = checklist->count - 3; /* End identity check at G27 */
-		break;
-	case USB_DEVICE_ID_LOGITECH_DFGT_WHEEL:
-		checklist = &lg4ff_main_checklist;
-		from_idx = 0;
-		to_idx = checklist->count - 4; /* End identity check at DFGT */
-		break;
-	default:
-		return 0;
+	/* identify current mode from USB PID */
+	for (i = 1; i < ARRAY_SIZE(lg4ff_alternate_modes); i++) {
+		dbg_hid("Testing whether PID is %X\n", lg4ff_alternate_modes[i].product_id);
+		if (reported_product_id == lg4ff_alternate_modes[i].product_id)
+			break;
 	}
 
-	for (i = from_idx; i <= to_idx; i++) {
-		const u16 mask = checklist->models[i]->mask;
-		const u16 result = checklist->models[i]->result;
-		const u16 real_product_id = checklist->models[i]->real_product_id;
+	if (i == ARRAY_SIZE(lg4ff_alternate_modes))
+		return 0;
+
+	current_mode = BIT(i);
+
+	for (i = 0; i < ARRAY_SIZE(lg4ff_main_checklist); i++) {
+		const u16 mask = lg4ff_main_checklist[i]->mask;
+		const u16 result = lg4ff_main_checklist[i]->result;
+		const u16 real_product_id = lg4ff_main_checklist[i]->real_product_id;
 
-		if ((bcdDevice & mask) == result) {
+		if ((current_mode & lg4ff_main_checklist[i]->modes) && \
+				(bcdDevice & mask) == result) {
 			dbg_hid("Found wheel with real PID %X whose reported PID is %X\n", real_product_id, reported_product_id);
 			return real_product_id;
 		}
@@ -1246,12 +1280,13 @@ int lg4ff_init(struct hid_device *hid)
 		entry->wdata.set_range(hid, entry->wdata.range);
 
 #ifdef CONFIG_LEDS_CLASS
-	/* register led subsystem - G27 only */
+	/* register led subsystem - G27/G29 only */
 	entry->wdata.led_state = 0;
 	for (j = 0; j < 5; j++)
 		entry->wdata.led[j] = NULL;
 
-	if (lg4ff_devices[i].product_id == USB_DEVICE_ID_LOGITECH_G27_WHEEL) {
+	if (lg4ff_devices[i].product_id == USB_DEVICE_ID_LOGITECH_G27_WHEEL ||
+			lg4ff_devices[i].product_id == USB_DEVICE_ID_LOGITECH_G29_WHEEL) {
 		struct led_classdev *led;
 		size_t name_sz;
 		char *name;

drivers/hid/hid-logitech-hidpp.c

@@ -33,6 +33,11 @@ module_param(disable_raw_mode, bool, 0644);
 MODULE_PARM_DESC(disable_raw_mode,
 	"Disable Raw mode reporting for touchpads and keep firmware gestures.");
 
+static bool disable_tap_to_click;
+module_param(disable_tap_to_click, bool, 0644);
+MODULE_PARM_DESC(disable_tap_to_click,
+	"Disable Tap-To-Click mode reporting for touchpads (only on the K400 currently).");
+
 #define REPORT_ID_HIDPP_SHORT			0x10
 #define REPORT_ID_HIDPP_LONG			0x11
 
@@ -41,10 +46,15 @@ MODULE_PARM_DESC(disable_raw_mode,
 
 #define HIDPP_QUIRK_CLASS_WTP			BIT(0)
 #define HIDPP_QUIRK_CLASS_M560			BIT(1)
+#define HIDPP_QUIRK_CLASS_K400			BIT(2)
 
 /* bits 2..20 are reserved for classes */
-#define HIDPP_QUIRK_DELAYED_INIT		BIT(21)
+#define HIDPP_QUIRK_CONNECT_EVENTS		BIT(21)
 #define HIDPP_QUIRK_WTP_PHYSICAL_BUTTONS	BIT(22)
+#define HIDPP_QUIRK_NO_HIDINPUT			BIT(23)
+
+#define HIDPP_QUIRK_DELAYED_INIT		(HIDPP_QUIRK_NO_HIDINPUT | \
+						 HIDPP_QUIRK_CONNECT_EVENTS)
 
 /*
  * There are two hidpp protocols in use, the first version hidpp10 is known
@@ -552,6 +562,52 @@ static char *hidpp_get_device_name(struct hidpp_device *hidpp)
 	return name;
 }
 
+/* -------------------------------------------------------------------------- */
+/* 0x6010: Touchpad FW items                                                  */
+/* -------------------------------------------------------------------------- */
+
+#define HIDPP_PAGE_TOUCHPAD_FW_ITEMS			0x6010
+
+#define CMD_TOUCHPAD_FW_ITEMS_SET			0x10
+
+struct hidpp_touchpad_fw_items {
+	uint8_t presence;
+	uint8_t desired_state;
+	uint8_t state;
+	uint8_t persistent;
+};
+
+/**
+ * send a set state command to the device by reading the current items->state
+ * field. items is then filled with the current state.
+ */
+static int hidpp_touchpad_fw_items_set(struct hidpp_device *hidpp,
+				       u8 feature_index,
+				       struct hidpp_touchpad_fw_items *items)
+{
+	struct hidpp_report response;
+	int ret;
+	u8 *params = (u8 *)response.fap.params;
+
+	ret = hidpp_send_fap_command_sync(hidpp, feature_index,
+		CMD_TOUCHPAD_FW_ITEMS_SET, &items->state, 1, &response);
+
+	if (ret > 0) {
+		hid_err(hidpp->hid_dev, "%s: received protocol error 0x%02x\n",
+			__func__, ret);
+		return -EPROTO;
+	}
+	if (ret)
+		return ret;
+
+	items->presence = params[0];
+	items->desired_state = params[1];
+	items->state = params[2];
+	items->persistent = params[3];
+
+	return 0;
+}
+
 /* -------------------------------------------------------------------------- */
 /* 0x6100: TouchPadRawXY                                                      */
 /* -------------------------------------------------------------------------- */
@@ -1132,6 +1188,75 @@ static int m560_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 	return -1;
 }
 
+/* ------------------------------------------------------------------------- */
+/* Logitech K400 devices                                                     */
+/* ------------------------------------------------------------------------- */
+
+/*
+ * The Logitech K400 keyboard has an embedded touchpad which is seen
+ * as a mouse from the OS point of view. There is a hardware shortcut to disable
+ * tap-to-click but the setting is not remembered accross reset, annoying some
+ * users.
+ *
+ * We can toggle this feature from the host by using the feature 0x6010:
+ * Touchpad FW items
+ */
+
+struct k400_private_data {
+	u8 feature_index;
+};
+
+static int k400_disable_tap_to_click(struct hidpp_device *hidpp)
+{
+	struct k400_private_data *k400 = hidpp->private_data;
+	struct hidpp_touchpad_fw_items items = {};
+	int ret;
+	u8 feature_type;
+
+	if (!k400->feature_index) {
+		ret = hidpp_root_get_feature(hidpp,
+			HIDPP_PAGE_TOUCHPAD_FW_ITEMS,
+			&k400->feature_index, &feature_type);
+		if (ret)
+			/* means that the device is not powered up */
+			return ret;
+	}
+
+	ret = hidpp_touchpad_fw_items_set(hidpp, k400->feature_index, &items);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int k400_allocate(struct hid_device *hdev)
+{
+	struct hidpp_device *hidpp = hid_get_drvdata(hdev);
+	struct k400_private_data *k400;
+
+	k400 = devm_kzalloc(&hdev->dev, sizeof(struct k400_private_data),
+			    GFP_KERNEL);
+	if (!k400)
+		return -ENOMEM;
+
+	hidpp->private_data = k400;
+
+	return 0;
+};
+
+static int k400_connect(struct hid_device *hdev, bool connected)
+{
+	struct hidpp_device *hidpp = hid_get_drvdata(hdev);
+
+	if (!connected)
+		return 0;
+
+	if (!disable_tap_to_click)
+		return 0;
+
+	return k400_disable_tap_to_click(hidpp);
+}
+
 /* -------------------------------------------------------------------------- */
 /* Generic HID++ devices                                                      */
 /* -------------------------------------------------------------------------- */
@@ -1160,13 +1285,15 @@ static void hidpp_populate_input(struct hidpp_device *hidpp,
 		m560_populate_input(hidpp, input, origin_is_hid_core);
 }
 
-static void hidpp_input_configured(struct hid_device *hdev,
+static int hidpp_input_configured(struct hid_device *hdev,
 				struct hid_input *hidinput)
 {
 	struct hidpp_device *hidpp = hid_get_drvdata(hdev);
 	struct input_dev *input = hidinput->input;
 
 	hidpp_populate_input(hidpp, input, true);
+
+	return 0;
 }
 
 static int hidpp_raw_hidpp_event(struct hidpp_device *hidpp, u8 *data,
@@ -1203,7 +1330,7 @@ static int hidpp_raw_hidpp_event(struct hidpp_device *hidpp, u8 *data,
 	if (unlikely(hidpp_report_is_connect_event(report))) {
 		atomic_set(&hidpp->connected,
 				!(report->rap.params[0] & (1 << 6)));
-		if ((hidpp->quirks & HIDPP_QUIRK_DELAYED_INIT) &&
+		if ((hidpp->quirks & HIDPP_QUIRK_CONNECT_EVENTS) &&
 		    (schedule_work(&hidpp->work) == 0))
 			dbg_hid("%s: connect event already queued\n", __func__);
 		return 1;
@@ -1328,23 +1455,30 @@ static void hidpp_connect_event(struct hidpp_device *hidpp)
 		ret = m560_send_config_command(hdev, connected);
 		if (ret)
 			return;
+	} else if (hidpp->quirks & HIDPP_QUIRK_CLASS_K400) {
+		ret = k400_connect(hdev, connected);
+		if (ret)
+			return;
 	}
 
 	if (!connected || hidpp->delayed_input)
 		return;
 
+	/* the device is already connected, we can ask for its name and
+	 * protocol */
 	if (!hidpp->protocol_major) {
 		ret = !hidpp_is_connected(hidpp);
 		if (ret) {
 			hid_err(hdev, "Can not get the protocol version.\n");
 			return;
 		}
+		hid_info(hdev, "HID++ %u.%u device connected.\n",
+			 hidpp->protocol_major, hidpp->protocol_minor);
 	}
 
-	/* the device is already connected, we can ask for its name and
-	 * protocol */
-	hid_info(hdev, "HID++ %u.%u device connected.\n",
-		 hidpp->protocol_major, hidpp->protocol_minor);
+	if (!(hidpp->quirks & HIDPP_QUIRK_NO_HIDINPUT))
+		/* if HID created the input nodes for us, we can stop now */
+		return;
 
 	if (!hidpp->name || hidpp->name == hdev->name) {
 		name = hidpp_get_device_name(hidpp);
@@ -1397,7 +1531,8 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
 
 	if (disable_raw_mode) {
 		hidpp->quirks &= ~HIDPP_QUIRK_CLASS_WTP;
-		hidpp->quirks &= ~HIDPP_QUIRK_DELAYED_INIT;
+		hidpp->quirks &= ~HIDPP_QUIRK_CONNECT_EVENTS;
+		hidpp->quirks &= ~HIDPP_QUIRK_NO_HIDINPUT;
 	}
 
 	if (hidpp->quirks & HIDPP_QUIRK_CLASS_WTP) {
@@ -1408,6 +1543,10 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
 		ret = m560_allocate(hdev);
 		if (ret)
 			goto allocate_fail;
+	} else if (hidpp->quirks & HIDPP_QUIRK_CLASS_K400) {
+		ret = k400_allocate(hdev);
+		if (ret)
+			goto allocate_fail;
 	}
 
 	INIT_WORK(&hidpp->work, delayed_work_cb);
@@ -1448,7 +1587,7 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	/* Block incoming packets */
 	hid_device_io_stop(hdev);
 
-	if (hidpp->quirks & HIDPP_QUIRK_DELAYED_INIT)
+	if (hidpp->quirks & HIDPP_QUIRK_NO_HIDINPUT)
 		connect_mask &= ~HID_CONNECT_HIDINPUT;
 
 	ret = hid_hw_start(hdev, connect_mask);
@@ -1457,7 +1596,7 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id)
 		goto hid_hw_start_fail;
 	}
 
-	if (hidpp->quirks & HIDPP_QUIRK_DELAYED_INIT) {
+	if (hidpp->quirks & HIDPP_QUIRK_CONNECT_EVENTS) {
 		/* Allow incoming packets */
 		hid_device_io_start(hdev);
 
@@ -1502,6 +1641,10 @@ static const struct hid_device_id hidpp_devices[] = {
 	  HID_DEVICE(BUS_USB, HID_GROUP_LOGITECH_DJ_DEVICE,
 		USB_VENDOR_ID_LOGITECH, 0x402d),
 	  .driver_data = HIDPP_QUIRK_DELAYED_INIT | HIDPP_QUIRK_CLASS_M560 },
+	{ /* Keyboard logitech K400 */
+	  HID_DEVICE(BUS_USB, HID_GROUP_LOGITECH_DJ_DEVICE,
+		USB_VENDOR_ID_LOGITECH, 0x4024),
+	  .driver_data = HIDPP_QUIRK_CONNECT_EVENTS | HIDPP_QUIRK_CLASS_K400 },
 
 	{ HID_DEVICE(BUS_USB, HID_GROUP_LOGITECH_DJ_DEVICE,
 		USB_VENDOR_ID_LOGITECH, HID_ANY_ID)},

drivers/hid/hid-magicmouse.c

@@ -471,18 +471,22 @@ static int magicmouse_input_mapping(struct hid_device *hdev,
 	return 0;
 }
 
-static void magicmouse_input_configured(struct hid_device *hdev,
+static int magicmouse_input_configured(struct hid_device *hdev,
 		struct hid_input *hi)
 
 {
 	struct magicmouse_sc *msc = hid_get_drvdata(hdev);
+	int ret;
 
-	int ret = magicmouse_setup_input(msc->input, hdev);
+	ret = magicmouse_setup_input(msc->input, hdev);
 	if (ret) {
 		hid_err(hdev, "magicmouse setup input failed (%d)\n", ret);
 		/* clean msc->input to notify probe() of the failure */
 		msc->input = NULL;
+		return ret;
 	}
+
+	return 0;
 }
 
 

drivers/hid/hid-microsoft.c

@@ -278,6 +278,8 @@ static const struct hid_device_id ms_devices[] = {
 		.driver_data = MS_DUPLICATE_USAGES },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3),
 		.driver_data = MS_HIDINPUT },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_2),
+		.driver_data = MS_HIDINPUT },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_JP),
 		.driver_data = MS_HIDINPUT },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_3),

drivers/hid/hid-multitouch.c

@@ -309,6 +309,41 @@ static struct attribute_group mt_attribute_group = {
 	.attrs = sysfs_attrs
 };
 
+static void mt_get_feature(struct hid_device *hdev, struct hid_report *report)
+{
+	struct mt_device *td = hid_get_drvdata(hdev);
+	int ret, size = hid_report_len(report);
+	u8 *buf;
+
+	/*
+	 * Only fetch the feature report if initial reports are not already
+	 * been retrieved. Currently this is only done for Windows 8 touch
+	 * devices.
+	 */
+	if (!(hdev->quirks & HID_QUIRK_NO_INIT_REPORTS))
+		return;
+	if (td->mtclass.name != MT_CLS_WIN_8)
+		return;
+
+	buf = hid_alloc_report_buf(report, GFP_KERNEL);
+	if (!buf)
+		return;
+
+	ret = hid_hw_raw_request(hdev, report->id, buf, size,
+				 HID_FEATURE_REPORT, HID_REQ_GET_REPORT);
+	if (ret < 0) {
+		dev_warn(&hdev->dev, "failed to fetch feature %d\n",
+			 report->id);
+	} else {
+		ret = hid_report_raw_event(hdev, HID_FEATURE_REPORT, buf,
+					   size, 0);
+		if (ret)
+			dev_warn(&hdev->dev, "failed to report feature\n");
+	}
+
+	kfree(buf);
+}
+
 static void mt_feature_mapping(struct hid_device *hdev,
 		struct hid_field *field, struct hid_usage *usage)
 {
@@ -327,6 +362,8 @@ static void mt_feature_mapping(struct hid_device *hdev,
 
 		break;
 	case HID_DG_CONTACTMAX:
+		mt_get_feature(hdev, field->report);
+
 		td->maxcontact_report_id = field->report->id;
 		td->maxcontacts = field->value[0];
 		if (!td->maxcontacts &&
@@ -343,6 +380,7 @@ static void mt_feature_mapping(struct hid_device *hdev,
 			break;
 		}
 
+		mt_get_feature(hdev, field->report);
 		if (field->value[usage->usage_index] == MT_BUTTONTYPE_CLICKPAD)
 			td->is_buttonpad = true;
 
@@ -725,12 +763,13 @@ static void mt_touch_report(struct hid_device *hid, struct hid_report *report)
 		mt_sync_frame(td, report->field[0]->hidinput->input);
 }
 
-static void mt_touch_input_configured(struct hid_device *hdev,
+static int mt_touch_input_configured(struct hid_device *hdev,
 					struct hid_input *hi)
 {
 	struct mt_device *td = hid_get_drvdata(hdev);
 	struct mt_class *cls = &td->mtclass;
 	struct input_dev *input = hi->input;
+	int ret;
 
 	if (!td->maxcontacts)
 		td->maxcontacts = MT_DEFAULT_MAXCONTACT;
@@ -752,9 +791,12 @@ static void mt_touch_input_configured(struct hid_device *hdev,
 	if (td->is_buttonpad)
 		__set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
 
-	input_mt_init_slots(input, td->maxcontacts, td->mt_flags);
+	ret = input_mt_init_slots(input, td->maxcontacts, td->mt_flags);
+	if (ret)
+		return ret;
 
 	td->mt_flags = 0;
+	return 0;
 }
 
 static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi,
@@ -930,15 +972,19 @@ static void mt_post_parse(struct mt_device *td)
 		cls->quirks &= ~MT_QUIRK_CONTACT_CNT_ACCURATE;
 }
 
-static void mt_input_configured(struct hid_device *hdev, struct hid_input *hi)
+static int mt_input_configured(struct hid_device *hdev, struct hid_input *hi)
 {
 	struct mt_device *td = hid_get_drvdata(hdev);
 	char *name;
 	const char *suffix = NULL;
 	struct hid_field *field = hi->report->field[0];
+	int ret;
 
-	if (hi->report->id == td->mt_report_id)
-		mt_touch_input_configured(hdev, hi);
+	if (hi->report->id == td->mt_report_id) {
+		ret = mt_touch_input_configured(hdev, hi);
+		if (ret)
+			return ret;
+	}
 
 	/*
 	 * some egalax touchscreens have "application == HID_DG_TOUCHSCREEN"
@@ -968,6 +1014,9 @@ static void mt_input_configured(struct hid_device *hdev, struct hid_input *hi)
 		case HID_DG_TOUCHSCREEN:
 			/* we do not set suffix = "Touchscreen" */
 			break;
+		case HID_DG_TOUCHPAD:
+			suffix = "Touchpad";
+			break;
 		case HID_GD_SYSTEM_CONTROL:
 			suffix = "System Control";
 			break;
@@ -989,6 +1038,8 @@ static void mt_input_configured(struct hid_device *hdev, struct hid_input *hi)
 			hi->input->name = name;
 		}
 	}
+
+	return 0;
 }
 
 static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id)
@@ -1026,8 +1077,13 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id)
 		 * reports. Fortunately, the Win8 spec says that all touches
 		 * should be sent during each report, making the initialization
 		 * of input reports unnecessary.
+		 *
+		 * In addition some touchpads do not behave well if we read
+		 * all feature reports from them. Instead we prevent
+		 * initial report fetching and then selectively fetch each
+		 * report we are interested in.
 		 */
-		hdev->quirks |= HID_QUIRK_NO_INIT_INPUT_REPORTS;
+		hdev->quirks |= HID_QUIRK_NO_INIT_REPORTS;
 
 	td = devm_kzalloc(&hdev->dev, sizeof(struct mt_device), GFP_KERNEL);
 	if (!td) {

drivers/hid/hid-ntrig.c

@@ -859,14 +859,14 @@ static int ntrig_event (struct hid_device *hid, struct hid_field *field,
 	return 1;
 }
 
-static void ntrig_input_configured(struct hid_device *hid,
+static int ntrig_input_configured(struct hid_device *hid,
 		struct hid_input *hidinput)
 
 {
 	struct input_dev *input = hidinput->input;
 
 	if (hidinput->report->maxfield < 1)
-		return;
+		return 0;
 
 	switch (hidinput->report->field[0]->application) {
 	case HID_DG_PEN:
@@ -890,6 +890,8 @@ static void ntrig_input_configured(struct hid_device *hid,
 							"N-Trig MultiTouch";
 		break;
 	}
+
+	return 0;
 }
 
 static int ntrig_probe(struct hid_device *hdev, const struct hid_device_id *id)

drivers/hid/hid-prodikeys.c

@@ -427,7 +427,7 @@ static int pcmidi_handle_report4(struct pcmidi_snd *pm, u8 *data)
 					pm->midi_octave = 2;
 				dbg_hid("pcmidi mode: %d octave: %d\n",
 					pm->midi_mode, pm->midi_octave);
-			    continue;
+				continue;
 			} else
 				key = KEY_MESSENGER;
 			break;
@@ -695,7 +695,7 @@ static int pcmidi_snd_initialise(struct pcmidi_snd *pm)
 	if (err < 0) {
 		pk_error("failed to register pc-midi sound card: error %d\n",
 			 err);
-			 goto fail_register;
+		goto fail_register;
 	}
 
 	dbg_hid("pcmidi_snd_initialise finished ok\n");

drivers/hid/hid-rmi.c

@@ -1173,7 +1173,7 @@ static int rmi_populate(struct hid_device *hdev)
 	return 0;
 }
 
-static void rmi_input_configured(struct hid_device *hdev, struct hid_input *hi)
+static int rmi_input_configured(struct hid_device *hdev, struct hid_input *hi)
 {
 	struct rmi_data *data = hid_get_drvdata(hdev);
 	struct input_dev *input = hi->input;
@@ -1185,10 +1185,10 @@ static void rmi_input_configured(struct hid_device *hdev, struct hid_input *hi)
 	hid_dbg(hdev, "Opening low level driver\n");
 	ret = hid_hw_open(hdev);
 	if (ret)
-		return;
+		return ret;
 
 	if (!(data->device_flags & RMI_DEVICE))
-		return;
+		return 0;
 
 	/* Allow incoming hid reports */
 	hid_device_io_start(hdev);
@@ -1228,7 +1228,9 @@ static void rmi_input_configured(struct hid_device *hdev, struct hid_input *hi)
 	input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 0x0f, 0, 0);
 	input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 0x0f, 0, 0);
 
-	input_mt_init_slots(input, data->max_fingers, INPUT_MT_POINTER);
+	ret = input_mt_init_slots(input, data->max_fingers, INPUT_MT_POINTER);
+	if (ret < 0)
+		goto exit;
 
 	if (data->button_count) {
 		__set_bit(EV_KEY, input->evbit);
@@ -1244,6 +1246,7 @@ static void rmi_input_configured(struct hid_device *hdev, struct hid_input *hi)
 exit:
 	hid_device_io_stop(hdev);
 	hid_hw_close(hdev);
+	return ret;
 }
 
 static int rmi_input_mapping(struct hid_device *hdev,

drivers/hid/hid-saitek.c

@@ -177,6 +177,8 @@ static int saitek_event(struct hid_device *hdev, struct hid_field *field,
 static const struct hid_device_id saitek_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_PS1000),
 		.driver_data = SAITEK_FIX_PS1000 },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_MADCATZ, USB_DEVICE_ID_MADCATZ_RAT5),
+		.driver_data = SAITEK_RELEASE_MODE_RAT7 },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_RAT7_OLD),
 		.driver_data = SAITEK_RELEASE_MODE_RAT7 },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_RAT7),

drivers/hid/hid-sensor-hub.c

@@ -660,8 +660,8 @@ static int sensor_hub_probe(struct hid_device *hdev,
 						      GFP_KERNEL);
 	if (sd->hid_sensor_hub_client_devs == NULL) {
 		hid_err(hdev, "Failed to allocate memory for mfd cells\n");
-			ret = -ENOMEM;
-			goto err_stop_hw;
+		ret = -ENOMEM;
+		goto err_stop_hw;
 	}
 
 	for (i = 0; i < hdev->maxcollection; ++i) {
@@ -698,8 +698,8 @@ static int sensor_hub_probe(struct hid_device *hdev,
 					      collection->usage);
 			if (name == NULL) {
 				hid_err(hdev, "Failed MFD device name\n");
-					ret = -ENOMEM;
-					goto err_stop_hw;
+				ret = -ENOMEM;
+				goto err_stop_hw;
 			}
 			sd->hid_sensor_hub_client_devs[
 				sd->hid_sensor_client_cnt].name = name;

drivers/hid/hid-sony.c

@@ -1360,20 +1360,27 @@ static int sony_register_touchpad(struct hid_input *hi, int touch_count,
 	return 0;
 }
 
-static void sony_input_configured(struct hid_device *hdev,
+static int sony_input_configured(struct hid_device *hdev,
 					struct hid_input *hidinput)
 {
 	struct sony_sc *sc = hid_get_drvdata(hdev);
+	int ret;
 
 	/*
 	 * The Dualshock 4 touchpad supports 2 touches and has a
 	 * resolution of 1920x942 (44.86 dots/mm).
 	 */
 	if (sc->quirks & DUALSHOCK4_CONTROLLER) {
-		if (sony_register_touchpad(hidinput, 2, 1920, 942) != 0)
+		ret = sony_register_touchpad(hidinput, 2, 1920, 942);
+		if (ret) {
 			hid_err(sc->hdev,
-				"Unable to initialize multi-touch slots\n");
+				"Unable to initialize multi-touch slots: %d\n",
+				ret);
+			return ret;
+		}
 	}
+
+	return 0;
 }
 
 /*

drivers/hid/hid-uclogic.c

@@ -731,7 +731,7 @@ static int uclogic_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 	return 0;
 }
 
-static void uclogic_input_configured(struct hid_device *hdev,
+static int uclogic_input_configured(struct hid_device *hdev,
 		struct hid_input *hi)
 {
 	char *name;
@@ -741,7 +741,7 @@ static void uclogic_input_configured(struct hid_device *hdev,
 
 	/* no report associated (HID_QUIRK_MULTI_INPUT not set) */
 	if (!hi->report)
-		return;
+		return 0;
 
 	field = hi->report->field[0];
 
@@ -774,6 +774,8 @@ static void uclogic_input_configured(struct hid_device *hdev,
 			hi->input->name = name;
 		}
 	}
+
+	return 0;
 }
 
 /**

drivers/hid/i2c-hid/i2c-hid.c

@@ -1028,6 +1028,7 @@ static int i2c_hid_probe(struct i2c_client *client,
 
 	snprintf(hid->name, sizeof(hid->name), "%s %04hX:%04hX",
 		 client->name, hid->vendor, hid->product);
+	strlcpy(hid->phys, dev_name(&client->dev), sizeof(hid->phys));
 
 	ret = hid_add_device(hid);
 	if (ret) {

drivers/hid/usbhid/hid-quirks.c

@@ -92,6 +92,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_2, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TOUCH_COVER_2, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3, HID_QUIRK_NO_INIT_REPORTS },
+	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_2, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_JP, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_3, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_POWER_COVER, HID_QUIRK_NO_INIT_REPORTS },

drivers/hid/wacom_sys.c

@@ -211,7 +211,7 @@ static void wacom_usage_mapping(struct hid_device *hdev,
 	 * Bamboo models do not support HID_DG_CONTACTMAX.
 	 * And, Bamboo Pen only descriptor contains touch.
 	 */
-	if (features->type != BAMBOO_PT) {
+	if (features->type > BAMBOO_PT) {
 		/* ISDv4 touch devices at least supports one touch point */
 		if (finger && !features->touch_max)
 			features->touch_max = 1;
@@ -222,7 +222,8 @@ static void wacom_usage_mapping(struct hid_device *hdev,
 		features->x_max = field->logical_maximum;
 		if (finger) {
 			features->x_phy = field->physical_maximum;
-			if (features->type != BAMBOO_PT) {
+			if ((features->type != BAMBOO_PT) &&
+			    (features->type != BAMBOO_TOUCH)) {
 				features->unit = field->unit;
 				features->unitExpo = field->unit_exponent;
 			}
@@ -232,7 +233,8 @@ static void wacom_usage_mapping(struct hid_device *hdev,
 		features->y_max = field->logical_maximum;
 		if (finger) {
 			features->y_phy = field->physical_maximum;
-			if (features->type != BAMBOO_PT) {
+			if ((features->type != BAMBOO_PT) &&
+			    (features->type != BAMBOO_TOUCH)) {
 				features->unit = field->unit;
 				features->unitExpo = field->unit_exponent;
 			}
@@ -420,7 +422,7 @@ static int wacom_query_tablet_data(struct hid_device *hdev,
 			/* MT Tablet PC touch */
 			return wacom_set_device_mode(hdev, 3, 4, 4);
 		}
-		else if (features->type == WACOM_24HDT || features->type == CINTIQ_HYBRID) {
+		else if (features->type == WACOM_24HDT) {
 			return wacom_set_device_mode(hdev, 18, 3, 2);
 		}
 		else if (features->type == WACOM_27QHDT) {
@@ -430,7 +432,7 @@ static int wacom_query_tablet_data(struct hid_device *hdev,
 			return wacom_set_device_mode(hdev, 2, 2, 2);
 		}
 	} else if (features->device_type & WACOM_DEVICETYPE_PEN) {
-		if (features->type <= BAMBOO_PT && features->type != WIRELESS) {
+		if (features->type <= BAMBOO_PT) {
 			return wacom_set_device_mode(hdev, 2, 2, 2);
 		}
 	}
@@ -1547,15 +1549,16 @@ static void wacom_wireless_work(struct work_struct *work)
 		wacom_wac1->features =
 			*((struct wacom_features *)id->driver_data);
 		wacom_wac1->features.device_type |= WACOM_DEVICETYPE_PEN;
-		if (wacom_wac1->features.type != INTUOSHT &&
-		    wacom_wac1->features.type != BAMBOO_PT)
-			wacom_wac1->features.device_type |= WACOM_DEVICETYPE_PAD;
 		wacom_set_default_phy(&wacom_wac1->features);
 		wacom_calculate_res(&wacom_wac1->features);
 		snprintf(wacom_wac1->pen_name, WACOM_NAME_MAX, "%s (WL) Pen",
 			 wacom_wac1->features.name);
-		snprintf(wacom_wac1->pad_name, WACOM_NAME_MAX, "%s (WL) Pad",
-			 wacom_wac1->features.name);
+		if (wacom_wac1->features.type < BAMBOO_PEN ||
+		    wacom_wac1->features.type > BAMBOO_PT) {
+			snprintf(wacom_wac1->pad_name, WACOM_NAME_MAX, "%s (WL) Pad",
+				 wacom_wac1->features.name);
+			wacom_wac1->features.device_type |= WACOM_DEVICETYPE_PAD;
+		}
 		wacom_wac1->shared->touch_max = wacom_wac1->features.touch_max;
 		wacom_wac1->shared->type = wacom_wac1->features.type;
 		wacom_wac1->pid = wacom_wac->pid;
@@ -1566,7 +1569,8 @@ static void wacom_wireless_work(struct work_struct *work)
 
 		/* Touch interface */
 		if (wacom_wac1->features.touch_max ||
-		    wacom_wac1->features.type == INTUOSHT) {
+		    (wacom_wac1->features.type >= INTUOSHT &&
+		    wacom_wac1->features.type <= BAMBOO_PT)) {
 			wacom_wac2->features =
 				*((struct wacom_features *)id->driver_data);
 			wacom_wac2->features.pktlen = WACOM_PKGLEN_BBTOUCH3;
@@ -1575,20 +1579,22 @@ static void wacom_wireless_work(struct work_struct *work)
 			wacom_calculate_res(&wacom_wac2->features);
 			snprintf(wacom_wac2->touch_name, WACOM_NAME_MAX,
 				 "%s (WL) Finger",wacom_wac2->features.name);
-			snprintf(wacom_wac2->pad_name, WACOM_NAME_MAX,
-				 "%s (WL) Pad",wacom_wac2->features.name);
 			if (wacom_wac1->features.touch_max)
 				wacom_wac2->features.device_type |= WACOM_DEVICETYPE_TOUCH;
-			if (wacom_wac1->features.type == INTUOSHT ||
-			    wacom_wac1->features.type == BAMBOO_PT)
+			if (wacom_wac1->features.type >= INTUOSHT &&
+			    wacom_wac1->features.type <= BAMBOO_PT) {
+				snprintf(wacom_wac2->pad_name, WACOM_NAME_MAX,
+					 "%s (WL) Pad",wacom_wac2->features.name);
 				wacom_wac2->features.device_type |= WACOM_DEVICETYPE_PAD;
+			}
 			wacom_wac2->pid = wacom_wac->pid;
 			error = wacom_allocate_inputs(wacom2) ||
 				wacom_register_inputs(wacom2);
 			if (error)
 				goto fail;
 
-			if (wacom_wac1->features.type == INTUOSHT &&
+			if ((wacom_wac1->features.type == INTUOSHT ||
+			    wacom_wac1->features.type == INTUOSHT2) &&
 			    wacom_wac1->features.touch_max)
 				wacom_wac->shared->touch_input = wacom_wac2->touch_input;
 		}
@@ -1812,11 +1818,27 @@ static int wacom_probe(struct hid_device *hdev,
 	/* Note that if query fails it is not a hard failure */
 	wacom_query_tablet_data(hdev, features);
 
+	/* touch only Bamboo doesn't support pen */
+	if ((features->type == BAMBOO_TOUCH) &&
+	    (features->device_type & WACOM_DEVICETYPE_PEN)) {
+		error = -ENODEV;
+		goto fail_hw_start;
+	}
+
+	/* pen only Bamboo neither support touch nor pad */
+	if ((features->type == BAMBOO_PEN) &&
+	    ((features->device_type & WACOM_DEVICETYPE_TOUCH) ||
+	    (features->device_type & WACOM_DEVICETYPE_PAD))) {
+		error = -ENODEV;
+		goto fail_hw_start;
+	}
+
 	if (features->device_type & WACOM_DEVICETYPE_WL_MONITOR)
 		error = hid_hw_open(hdev);
 
-	if (wacom_wac->features.type == INTUOSHT && 
-	    wacom_wac->features.device_type & WACOM_DEVICETYPE_TOUCH) {
+	if ((wacom_wac->features.type == INTUOSHT ||
+	    wacom_wac->features.type == INTUOSHT2) &&
+	    (wacom_wac->features.device_type & WACOM_DEVICETYPE_TOUCH)) {
 			wacom_wac->shared->touch_input = wacom_wac->touch_input;
 	}
 

drivers/hid/wacom_wac.h

@@ -68,6 +68,7 @@
 #define WACOM_REPORT_BPAD_PEN		3
 #define WACOM_REPORT_BPAD_TOUCH		16
 #define WACOM_REPORT_DEVICE_LIST	16
+#define WACOM_REPORT_INTUOS_PEN		16
 #define WACOM_REPORT_REMOTE		17
 
 /* device quirks */
@@ -117,22 +118,26 @@ enum {
 	INTUOSPS,
 	INTUOSPM,
 	INTUOSPL,
-	INTUOSHT,
 	WACOM_21UX2,
 	WACOM_22HD,
 	DTK,
 	WACOM_24HD,
 	WACOM_27QHD,
 	CINTIQ_HYBRID,
+	CINTIQ_COMPANION_2,
 	CINTIQ,
 	WACOM_BEE,
 	WACOM_13HD,
 	WACOM_MO,
-	WIRELESS,
+	BAMBOO_PEN,
+	INTUOSHT,
+	INTUOSHT2,
+	BAMBOO_TOUCH,
 	BAMBOO_PT,
 	WACOM_24HDT,
 	WACOM_27QHDT,
 	BAMBOO_PAD,
+	WIRELESS,
 	REMOTE,
 	TABLETPC,   /* add new TPC below */
 	TABLETPCE,

include/linux/hid.h

@@ -698,8 +698,8 @@ struct hid_driver {
 	int (*input_mapped)(struct hid_device *hdev,
 			struct hid_input *hidinput, struct hid_field *field,
 			struct hid_usage *usage, unsigned long **bit, int *max);
-	void (*input_configured)(struct hid_device *hdev,
-				 struct hid_input *hidinput);
+	int (*input_configured)(struct hid_device *hdev,
+				struct hid_input *hidinput);
 	void (*feature_mapping)(struct hid_device *hdev,
 			struct hid_field *field,
 			struct hid_usage *usage);