usb: Change usb_hcd->bandwidth_mutex to a pointer.

Change the bandwith_mutex in struct usb_hcd to a pointer.  This will allow
the pointer to be shared across usb_hcds for the upcoming work to split
the xHCI driver roothub into a USB 2.0/1.1 and a USB 3.0 bus.
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>

drivers/usb/core/hcd.c

@@ -2191,6 +2191,15 @@ struct usb_hcd *usb_create_hcd (const struct hc_driver *driver,
 		dev_dbg (dev, "hcd alloc failed\n");
 		return NULL;
 	}
+	hcd->bandwidth_mutex = kmalloc(sizeof(*hcd->bandwidth_mutex),
+			GFP_KERNEL);
+	if (!hcd->bandwidth_mutex) {
+		kfree(hcd);
+		dev_dbg(dev, "hcd bandwidth mutex alloc failed\n");
+		return NULL;
+	}
+	mutex_init(hcd->bandwidth_mutex);
+
 	dev_set_drvdata(dev, hcd);
 	kref_init(&hcd->kref);
 
@@ -2205,7 +2214,6 @@ struct usb_hcd *usb_create_hcd (const struct hc_driver *driver,
 #ifdef CONFIG_USB_SUSPEND
 	INIT_WORK(&hcd->wakeup_work, hcd_resume_work);
 #endif
-	mutex_init(&hcd->bandwidth_mutex);
 
 	hcd->driver = driver;
 	hcd->product_desc = (driver->product_desc) ? driver->product_desc :
@@ -2218,6 +2226,7 @@ static void hcd_release (struct kref *kref)
 {
 	struct usb_hcd *hcd = container_of (kref, struct usb_hcd, kref);
 
+	kfree(hcd->bandwidth_mutex);
 	kfree(hcd);
 }
 

drivers/usb/core/hub.c

@@ -3776,13 +3776,13 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
 	if (!udev->actconfig)
 		goto done;
 
-	mutex_lock(&hcd->bandwidth_mutex);
+	mutex_lock(hcd->bandwidth_mutex);
 	ret = usb_hcd_alloc_bandwidth(udev, udev->actconfig, NULL, NULL);
 	if (ret < 0) {
 		dev_warn(&udev->dev,
 				"Busted HC?  Not enough HCD resources for "
 				"old configuration.\n");
-		mutex_unlock(&hcd->bandwidth_mutex);
+		mutex_unlock(hcd->bandwidth_mutex);
 		goto re_enumerate;
 	}
 	ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
@@ -3793,10 +3793,10 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
 		dev_err(&udev->dev,
 			"can't restore configuration #%d (error=%d)\n",
 			udev->actconfig->desc.bConfigurationValue, ret);
-		mutex_unlock(&hcd->bandwidth_mutex);
+		mutex_unlock(hcd->bandwidth_mutex);
 		goto re_enumerate;
   	}
-	mutex_unlock(&hcd->bandwidth_mutex);
+	mutex_unlock(hcd->bandwidth_mutex);
 	usb_set_device_state(udev, USB_STATE_CONFIGURED);
 
 	/* Put interfaces back into the same altsettings as before.

drivers/usb/core/message.c

@@ -1284,12 +1284,12 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
 	/* Make sure we have enough bandwidth for this alternate interface.
 	 * Remove the current alt setting and add the new alt setting.
 	 */
-	mutex_lock(&hcd->bandwidth_mutex);
+	mutex_lock(hcd->bandwidth_mutex);
 	ret = usb_hcd_alloc_bandwidth(dev, NULL, iface->cur_altsetting, alt);
 	if (ret < 0) {
 		dev_info(&dev->dev, "Not enough bandwidth for altsetting %d\n",
 				alternate);
-		mutex_unlock(&hcd->bandwidth_mutex);
+		mutex_unlock(hcd->bandwidth_mutex);
 		return ret;
 	}
 
@@ -1311,10 +1311,10 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
 	} else if (ret < 0) {
 		/* Re-instate the old alt setting */
 		usb_hcd_alloc_bandwidth(dev, NULL, alt, iface->cur_altsetting);
-		mutex_unlock(&hcd->bandwidth_mutex);
+		mutex_unlock(hcd->bandwidth_mutex);
 		return ret;
 	}
-	mutex_unlock(&hcd->bandwidth_mutex);
+	mutex_unlock(hcd->bandwidth_mutex);
 
 	/* FIXME drivers shouldn't need to replicate/bugfix the logic here
 	 * when they implement async or easily-killable versions of this or
@@ -1413,7 +1413,7 @@ int usb_reset_configuration(struct usb_device *dev)
 
 	config = dev->actconfig;
 	retval = 0;
-	mutex_lock(&hcd->bandwidth_mutex);
+	mutex_lock(hcd->bandwidth_mutex);
 	/* Make sure we have enough bandwidth for each alternate setting 0 */
 	for (i = 0; i < config->desc.bNumInterfaces; i++) {
 		struct usb_interface *intf = config->interface[i];
@@ -1442,7 +1442,7 @@ int usb_reset_configuration(struct usb_device *dev)
 				usb_hcd_alloc_bandwidth(dev, NULL,
 						alt, intf->cur_altsetting);
 		}
-		mutex_unlock(&hcd->bandwidth_mutex);
+		mutex_unlock(hcd->bandwidth_mutex);
 		return retval;
 	}
 	retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
@@ -1451,7 +1451,7 @@ int usb_reset_configuration(struct usb_device *dev)
 			NULL, 0, USB_CTRL_SET_TIMEOUT);
 	if (retval < 0)
 		goto reset_old_alts;
-	mutex_unlock(&hcd->bandwidth_mutex);
+	mutex_unlock(hcd->bandwidth_mutex);
 
 	/* re-init hc/hcd interface/endpoint state */
 	for (i = 0; i < config->desc.bNumInterfaces; i++) {
@@ -1739,10 +1739,10 @@ int usb_set_configuration(struct usb_device *dev, int configuration)
 	 * host controller will not allow submissions to dropped endpoints.  If
 	 * this call fails, the device state is unchanged.
 	 */
-	mutex_lock(&hcd->bandwidth_mutex);
+	mutex_lock(hcd->bandwidth_mutex);
 	ret = usb_hcd_alloc_bandwidth(dev, cp, NULL, NULL);
 	if (ret < 0) {
-		mutex_unlock(&hcd->bandwidth_mutex);
+		mutex_unlock(hcd->bandwidth_mutex);
 		usb_autosuspend_device(dev);
 		goto free_interfaces;
 	}
@@ -1761,11 +1761,11 @@ int usb_set_configuration(struct usb_device *dev, int configuration)
 	if (!cp) {
 		usb_set_device_state(dev, USB_STATE_ADDRESS);
 		usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
-		mutex_unlock(&hcd->bandwidth_mutex);
+		mutex_unlock(hcd->bandwidth_mutex);
 		usb_autosuspend_device(dev);
 		goto free_interfaces;
 	}
-	mutex_unlock(&hcd->bandwidth_mutex);
+	mutex_unlock(hcd->bandwidth_mutex);
 	usb_set_device_state(dev, USB_STATE_CONFIGURED);
 
 	/* Initialize the new interface structures and the

include/linux/usb/hcd.h

@@ -142,7 +142,7 @@ struct usb_hcd {
 	 * bandwidth_mutex should be dropped after a successful control message
 	 * to the device, or resetting the bandwidth after a failed attempt.
 	 */
-	struct mutex		bandwidth_mutex;
+	struct mutex		*bandwidth_mutex;
 
 
 #define HCD_BUFFER_POOLS	4