Commit d69c6ddd authored by Rob Herring's avatar Rob Herring

dt-bindings: Fix JSON pointers

The correct syntax for JSON pointers begins with a '/' after the '#'.
Without a '/', the string should be interpreted as a subschema
identifier. The jsonschema module currently doesn't handle subschema
identifiers and incorrectly allows JSON pointers to begin without a '/'.
Let's fix this before it becomes a problem when jsonschema module is
fixed.

Converted with:
perl -p -i -e 's/yaml#definitions/yaml#\/definitions/g' `find Documentation/devicetree/bindings/ -name "*.yaml"`

Cc: Maxime Ripard <mripard@kernel.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: netdev@vger.kernel.org
Acked-By: default avatarVinod Koul <vkoul@kernel.org>
Acked-by: default avatarLee Jones <lee.jones@linaro.org>
Acked-by: default avatarGuenter Roeck <linux@roeck-us.net>
Acked-by: default avatarSebastian Reichel <sre@kernel.org>
Acked-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Acked-by: default avatarMark Brown <broonie@kernel.org>
Acked-by: default avatarJakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20201217223429.354283-1-robh@kernel.orgSigned-off-by: default avatarRob Herring <robh@kernel.org>
parent d64c6f96
......@@ -313,7 +313,7 @@ patternProperties:
wakeup-latency-us by this duration.
idle-state-name:
$ref: /schemas/types.yaml#definitions/string
$ref: /schemas/types.yaml#/definitions/string
description:
A string used as a descriptive name for the idle state.
......
......@@ -34,7 +34,7 @@ properties:
description:
The SRAM that needs to be claimed to access the display engine
bus.
$ref: /schemas/types.yaml#definitions/phandle-array
$ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
ranges: true
......
......@@ -46,7 +46,7 @@ properties:
const: 1
syscon:
$ref: /schemas/types.yaml#definitions/phandle
$ref: /schemas/types.yaml#/definitions/phandle
description: Phandle to the Baikal-T1 System Controller DT node
interrupts:
......
......@@ -37,7 +37,7 @@ properties:
description: Size of the connector, should be specified in case of
non-fullsize 'usb-a-connector' or 'usb-b-connector' compatible
connectors.
$ref: /schemas/types.yaml#definitions/string
$ref: /schemas/types.yaml#/definitions/string
enum:
- mini
......@@ -67,7 +67,7 @@ properties:
power-role:
description: Determines the power role that the Type C connector will
support. "dual" refers to Dual Role Port (DRP).
$ref: /schemas/types.yaml#definitions/string
$ref: /schemas/types.yaml#/definitions/string
enum:
- source
......@@ -76,7 +76,7 @@ properties:
try-power-role:
description: Preferred power role.
$ref: /schemas/types.yaml#definitions/string
$ref: /schemas/types.yaml#/definitions/string
enum:
- source
......@@ -86,7 +86,7 @@ properties:
data-role:
description: Data role if Type C connector supports USB data. "dual" refers
Dual Role Device (DRD).
$ref: /schemas/types.yaml#definitions/string
$ref: /schemas/types.yaml#/definitions/string
enum:
- host
......@@ -105,7 +105,7 @@ properties:
Type-C Cable and Connector specification, when Power Delivery is not
supported.
allOf:
- $ref: /schemas/types.yaml#definitions/string
- $ref: /schemas/types.yaml#/definitions/string
enum:
- default
- 1.5A
......
......@@ -38,12 +38,12 @@ properties:
maxItems: 255
dma-channels:
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
description:
Number of DMA channels supported by the controller.
dma-requests:
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
description:
Number of DMA request signals supported by the controller.
......
......@@ -23,7 +23,7 @@ properties:
pattern: "^dma-router(@.*)?$"
dma-masters:
$ref: /schemas/types.yaml#definitions/phandle-array
$ref: /schemas/types.yaml#/definitions/phandle-array
description:
Array of phandles to the DMA controllers the router can direct
the signal to.
......
......@@ -48,7 +48,7 @@ properties:
ingenic,reserved-channels property.
ingenic,reserved-channels:
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
description: >
Bitmask of channels to reserve for devices that need a specific
channel. These channels will only be assigned when explicitely
......
......@@ -54,7 +54,7 @@ properties:
maximum: 16
dma-masters:
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
description: |
Number of DMA masters supported by the controller. In case if
not specified the driver will try to auto-detect this and
......@@ -63,7 +63,7 @@ properties:
maximum: 4
chan_allocation_order:
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
description: |
DMA channels allocation order specifier. Zero means ascending order
(first free allocated), while one - descending (last free allocated).
......@@ -71,7 +71,7 @@ properties:
enum: [0, 1]
chan_priority:
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
description: |
DMA channels priority order. Zero means ascending channels priority
so the very first channel has the highest priority. While 1 means
......@@ -80,7 +80,7 @@ properties:
enum: [0, 1]
block_size:
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
description: Maximum block size supported by the DMA controller.
enum: [3, 7, 15, 31, 63, 127, 255, 511, 1023, 2047, 4095]
......@@ -139,7 +139,7 @@ properties:
default: 256
snps,dma-protection-control:
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
description: |
Bits one-to-one passed to the AHB HPROT[3:1] bus. Each bit setting
indicates the following features: bit 0 - privileged mode,
......
......@@ -131,7 +131,7 @@ properties:
default: 1
read-only:
$ref: /schemas/types.yaml#definitions/flag
$ref: /schemas/types.yaml#/definitions/flag
description:
Disables writes to the eeprom.
......@@ -141,7 +141,7 @@ properties:
Total eeprom size in bytes.
no-read-rollover:
$ref: /schemas/types.yaml#definitions/flag
$ref: /schemas/types.yaml#/definitions/flag
description:
Indicates that the multi-address eeprom does not automatically roll
over reads to the next slave address. Please consult the manual of
......
......@@ -45,13 +45,13 @@ properties:
spi-max-frequency: true
pagesize:
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
enum: [1, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, 8192, 16384, 32768, 65536, 131072]
description:
Size of the eeprom page.
size:
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
description:
Total eeprom size in bytes.
......
......@@ -32,7 +32,7 @@ properties:
PVT controller has 5 VM (voltage monitor) sensors.
vm-map defines CPU core to VM instance mapping. A
value of 0xff means that VM sensor is unused.
$ref: /schemas/types.yaml#definitions/uint8-array
$ref: /schemas/types.yaml#/definitions/uint8-array
maxItems: 5
clocks:
......
......@@ -29,12 +29,12 @@ properties:
const: 0x70
sensirion,blocking-io:
$ref: /schemas/types.yaml#definitions/flag
$ref: /schemas/types.yaml#/definitions/flag
description:
If set, the driver hold the i2c bus until measurement is finished.
sensirion,low-precision:
$ref: /schemas/types.yaml#definitions/flag
$ref: /schemas/types.yaml#/definitions/flag
description:
If set, the sensor aquire data with low precision (not recommended).
The driver aquire data with high precision by default.
......
......@@ -61,7 +61,7 @@ properties:
Array of three(TMP513) or two(TMP512) n-Factor value for each remote
temperature channel.
See datasheet Table 11 for n-Factor range list and value interpretation.
$ref: /schemas/types.yaml#definitions/uint32-array
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 2
maxItems: 3
items:
......
......@@ -45,7 +45,7 @@ properties:
default: 0x16
upisemi,continuous:
$ref: /schemas/types.yaml#definitions/flag
$ref: /schemas/types.yaml#/definitions/flag
description: |
This chip has two power modes: one-shot (chip takes one measurement and
then shuts itself down) and continuous (chip takes continuous
......
......@@ -72,7 +72,7 @@ properties:
- finest
semtech,startup-sensor:
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
default: 0
description:
......@@ -81,7 +81,7 @@ properties:
compensation.
semtech,proxraw-strength:
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 2, 4, 8]
default: 2
description:
......@@ -89,7 +89,7 @@ properties:
represent 1-1/N.
semtech,avg-pos-strength:
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 16, 64, 128, 256, 512, 1024, 4294967295]
default: 16
description:
......
......@@ -34,13 +34,13 @@ patternProperties:
linux,code:
description: Key / Axis code to emit.
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
linux,input-type:
description:
Specify event type this button/key generates. If not specified defaults to
<1> == EV_KEY.
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
default: 1
......@@ -56,12 +56,12 @@ patternProperties:
linux,input-value = <0xffffffff>; /* -1 */
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
debounce-interval:
description:
Debouncing interval time in milliseconds. If not specified defaults to 5.
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
default: 5
......@@ -79,7 +79,7 @@ patternProperties:
EV_ACT_ANY - both asserted and deasserted
EV_ACT_ASSERTED - asserted
EV_ACT_DEASSERTED - deasserted
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2]
linux,can-disable:
......@@ -118,7 +118,7 @@ then:
poll-interval:
description:
Poll interval time in milliseconds
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
required:
- poll-interval
......
......@@ -42,7 +42,7 @@ properties:
Specifies the list of CPU interrupt vectors to which the GIC may not
route interrupts. This property is ignored if the CPU is started in EIC
mode.
$ref: /schemas/types.yaml#definitions/uint32-array
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 6
uniqueItems: true
......@@ -56,7 +56,7 @@ properties:
It accepts two values: the 1st is the starting interrupt and the 2nd is
the size of the reserved range. If not specified, the driver will
allocate the last (2 * number of VPEs in the system).
$ref: /schemas/types.yaml#definitions/uint32-array
$ref: /schemas/types.yaml#/definitions/uint32-array
items:
- minimum: 0
maximum: 254
......
......@@ -80,7 +80,7 @@ properties:
mapping is provided.
ti,irqs-reserved:
$ref: /schemas/types.yaml#definitions/uint8
$ref: /schemas/types.yaml#/definitions/uint8
description: |
Bitmask of host interrupts between 0 and 7 (corresponding to PRUSS INTC
output interrupts 2 through 9) that are not connected to the Arm interrupt
......
......@@ -76,7 +76,7 @@ properties:
"limit" specifies the limit for translation
ti,unmapped-event-sources:
$ref: /schemas/types.yaml#definitions/phandle-array
$ref: /schemas/types.yaml#/definitions/phandle-array
description:
Array of phandles to DMA controllers where the unmapped events originate.
......
......@@ -22,7 +22,7 @@ properties:
The default brightness that should be applied to the LED by the operating
system on start-up. The brightness should not exceed the brightness the
LED can provide.
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
max-brightness:
description:
......@@ -31,6 +31,6 @@ properties:
on the brightness apart from what the driver says, as it could happen
that a LED can be made so bright that it gets damaged or causes damage
due to restrictions in a specific system, such as mounting conditions.
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
additionalProperties: true
......@@ -27,21 +27,21 @@ properties:
List of device current outputs the LED is connected to. The outputs are
identified by the numbers that must be defined in the LED device binding
documentation.
$ref: /schemas/types.yaml#definitions/uint32-array
$ref: /schemas/types.yaml#/definitions/uint32-array
function:
description:
LED function. Use one of the LED_FUNCTION_* prefixed definitions
from the header include/dt-bindings/leds/common.h. If there is no
matching LED_FUNCTION available, add a new one.
$ref: /schemas/types.yaml#definitions/string
$ref: /schemas/types.yaml#/definitions/string
color:
description:
Color of the LED. Use one of the LED_COLOR_ID_* prefixed definitions from
the header include/dt-bindings/leds/common.h. If there is no matching
LED_COLOR_ID available, add a new one.
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 9
......@@ -49,7 +49,7 @@ properties:
description:
Integer to be used when more than one instance of the same function is
needed, differing only with an ordinal number.
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
label:
description:
......@@ -66,7 +66,7 @@ properties:
produced where the LED momentarily turns off (or on). The "keep" setting
will keep the LED at whatever its current state is, without producing a
glitch.
$ref: /schemas/types.yaml#definitions/string
$ref: /schemas/types.yaml#/definitions/string
enum:
- on
- off
......@@ -77,7 +77,7 @@ properties:
description:
This parameter, if present, is a string defining the trigger assigned to
the LED.
$ref: /schemas/types.yaml#definitions/string
$ref: /schemas/types.yaml#/definitions/string
enum:
# LED will act as a back-light, controlled by the framebuffer system
......@@ -109,7 +109,7 @@ properties:
brightness and duration (in ms). The exact format is
described in:
Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt
$ref: /schemas/types.yaml#definitions/uint32-matrix
$ref: /schemas/types.yaml#/definitions/uint32-matrix
items:
minItems: 2
maxItems: 2
......@@ -143,7 +143,7 @@ properties:
the device tree and be referenced by a phandle and a set of phandle
arguments. A length of arguments should be specified by the
#trigger-source-cells property in the source node.
$ref: /schemas/types.yaml#definitions/phandle-array
$ref: /schemas/types.yaml#/definitions/phandle-array
# Required properties for flash LED child nodes:
flash-max-microamp:
......
......@@ -35,7 +35,7 @@ properties:
description: I2C slave address
clock-mode:
$ref: /schemas/types.yaml#definitions/uint8
$ref: /schemas/types.yaml#/definitions/uint8
description: |
Input clock mode
enum:
......@@ -49,7 +49,7 @@ properties:
GPIO attached to the chip's enable pin
pwr-sel:
$ref: /schemas/types.yaml#definitions/uint8
$ref: /schemas/types.yaml#/definitions/uint8
description: |
LP8501 specific property. Power selection for output channels.
enum:
......@@ -70,14 +70,14 @@ patternProperties:
$ref: common.yaml#
properties:
led-cur:
$ref: /schemas/types.yaml#definitions/uint8
$ref: /schemas/types.yaml#/definitions/uint8
description: |
Current setting at each LED channel (mA x10, 0 if LED is not connected)
minimum: 0
maximum: 255
max-cur:
$ref: /schemas/types.yaml#definitions/uint8
$ref: /schemas/types.yaml#/definitions/uint8
description: Maximun current at each LED channel.
reg:
......@@ -97,7 +97,7 @@ patternProperties:
- 8 # LED output D9
chan-name:
$ref: /schemas/types.yaml#definitions/string
$ref: /schemas/types.yaml#/definitions/string
description: name of channel
required:
......
......@@ -38,7 +38,7 @@ properties:
const: stmmaceth
syscon:
$ref: /schemas/types.yaml#definitions/phandle
$ref: /schemas/types.yaml#/definitions/phandle
description:
Phandle to the device containing the EMAC or GMAC clock
register
......@@ -114,7 +114,7 @@ allOf:
then:
properties:
allwinner,leds-active-low:
$ref: /schemas/types.yaml#definitions/flag
$ref: /schemas/types.yaml#/definitions/flag
description:
EPHY LEDs are active low.
......@@ -126,7 +126,7 @@ allOf:
const: allwinner,sun8i-h3-mdio-mux
mdio-parent-bus:
$ref: /schemas/types.yaml#definitions/phandle
$ref: /schemas/types.yaml#/definitions/phandle
description:
Phandle to EMAC MDIO.
......
......@@ -60,7 +60,7 @@ allOf:
- const: timing-adjustment
amlogic,tx-delay-ns:
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
description:
The internal RGMII TX clock delay (provided by this driver) in
nanoseconds. Allowed values are 0ns, 2ns, 4ns, 6ns.
......
......@@ -54,7 +54,7 @@ patternProperties:
description:
Describes the label associated with this port, which will become
the netdev name
$ref: /schemas/types.yaml#definitions/string
$ref: /schemas/types.yaml#/definitions/string
link:
description:
......@@ -62,13 +62,13 @@ patternProperties:
port is used as the outgoing port towards the phandle ports. The
full routing information must be given, not just the one hop
routes to neighbouring switches
$ref: /schemas/types.yaml#definitions/phandle-array
$ref: /schemas/types.yaml#/definitions/phandle-array
ethernet:
description:
Should be a phandle to a valid Ethernet device node. This host
device is what the switch port is connected to
$ref: /schemas/types.yaml#definitions/phandle
$ref: /schemas/types.yaml#/definitions/phandle
phy-handle: true
......
......@@ -16,7 +16,7 @@ properties:
local-mac-address:
description:
Specifies the MAC address that was assigned to the network device.
$ref: /schemas/types.yaml#definitions/uint8-array
$ref: /schemas/types.yaml#/definitions/uint8-array
items:
- minItems: 6
maxItems: 6
......@@ -27,20 +27,20 @@ properties:
program; should be used in cases where the MAC address assigned
to the device by the boot program is different from the
local-mac-address property.
$ref: /schemas/types.yaml#definitions/uint8-array
$ref: /schemas/types.yaml#/definitions/uint8-array
items:
- minItems: 6
maxItems: 6
max-frame-size:
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
description:
Maximum transfer unit (IEEE defined MTU), rather than the
maximum frame size (there\'s contradiction in the Devicetree
Specification).
max-speed:
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
description:
Specifies maximum speed in Mbit/s supported by the device.
......@@ -101,7 +101,7 @@ properties:
$ref: "#/properties/phy-connection-type"
phy-handle:
$ref: /schemas/types.yaml#definitions/phandle
$ref: /schemas/types.yaml#/definitions/phandle
description:
Specifies a reference to a node representing a PHY device.
......@@ -114,7 +114,7 @@ properties:
deprecated: true
rx-fifo-depth:
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
description:
The size of the controller\'s receive fifo in bytes. This is used
for components that can have configurable receive fifo sizes,
......@@ -129,12 +129,12 @@ properties:
If this property is present then the MAC applies the RX delay.
sfp:
$ref: /schemas/types.yaml#definitions/phandle
$ref: /schemas/types.yaml#/definitions/phandle
description:
Specifies a reference to a node representing a SFP cage.
tx-fifo-depth:
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
description:
The size of the controller\'s transmit fifo in bytes. This
is used for components that can have configurable fifo sizes.
......@@ -150,7 +150,7 @@ properties:
description:
Specifies the PHY management type. If auto is set and fixed-link
is not specified, it uses MDIO for management.
$ref: /schemas/types.yaml#definitions/string
$ref: /schemas/types.yaml#/definitions/string
default: auto
enum:
- auto
......@@ -198,17 +198,17 @@ properties:
speed:
description:
Link speed.
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
enum: [10, 100, 1000]
full-duplex:
$ref: /schemas/types.yaml#definitions/flag
$ref: /schemas/types.yaml#/definitions/flag
description:
Indicates that full-duplex is used. When absent, half
duplex is assumed.
asym-pause:
$ref: /schemas/types.yaml#definitions/flag
$ref: /schemas/types.yaml#/definitions/flag
description:
Indicates that asym_pause should be enabled.
......
......@@ -78,57 +78,57 @@ properties:
Maximum PHY supported speed in Mbits / seconds.
broken-turn-around:
$ref: /schemas/types.yaml#definitions/flag
$ref: /schemas/types.yaml#/definitions/flag
description:
If set, indicates the PHY device does not correctly release
the turn around line low at end of the control phase of the
MDIO transaction.
enet-phy-lane-swap:
$ref: /schemas/types.yaml#definitions/flag
$ref: /schemas/types.yaml#/definitions/flag
description:
If set, indicates the PHY will swap the TX/RX lanes to
compensate for the board being designed with the lanes
swapped.
eee-broken-100tx:
$ref: /schemas/types.yaml#definitions/flag
$ref: /schemas/types.yaml#/definitions/flag
description:
Mark the corresponding energy efficient ethernet mode as
broken and request the ethernet to stop advertising it.
eee-broken-1000t:
$ref: /schemas/types.yaml#definitions/flag
$ref: /schemas/types.yaml#/definitions/flag
description:
Mark the corresponding energy efficient ethernet mode as
broken and request the ethernet to stop advertising it.
eee-broken-10gt:
$ref: /schemas/types.yaml#definitions/flag
$ref: /schemas/types.yaml#/definitions/flag
description:
Mark the corresponding energy efficient ethernet mode as
broken and request the ethernet to stop advertising it.
eee-broken-1000kx:
$ref: /schemas/types.yaml#definitions/flag
$ref: /schemas/types.yaml#/definitions/flag
description:
Mark the corresponding energy efficient ethernet mode as
broken and request the ethernet to stop advertising it.
eee-broken-10gkx4:
$ref: /schemas/types.yaml#definitions/flag
$ref: /schemas/types.yaml#/definitions/flag
description:
Mark the corresponding energy efficient ethernet mode as
broken and request the ethernet to stop advertising it.
eee-broken-10gkr:
$ref: /schemas/types.yaml#definitions/flag
$ref: /schemas/types.yaml#/definitions/flag
description:
Mark the corresponding energy efficient ethernet mode as
broken and request the ethernet to stop advertising it.
phy-is-integrated:
$ref: /schemas/types.yaml#definitions/flag
$ref: /schemas/types.yaml#/definitions/flag
description:
If set, indicates that the PHY is integrated into the same
physical package as the Ethernet MAC. If needed, muxers
......@@ -158,7 +158,7 @@ properties:
this property is missing the delay will be skipped.
sfp:
$ref: /schemas/types.yaml#definitions/phandle
$ref: /schemas/types.yaml#/definitions/phandle
description:
Specifies a reference to a node representing a SFP cage.
......
......@@ -31,7 +31,7 @@ properties:
phy-mode: true
pcs-handle:
$ref: /schemas/types.yaml#definitions/phandle
$ref: /schemas/types.yaml#/definitions/phandle
description:
A reference to a node representing a PCS PHY device found on
the internal MDIO bus.
......
......@@ -70,7 +70,7 @@ patternProperties:
The ID number for the device.
broken-turn-around:
$ref: /schemas/types.yaml#definitions/flag
$ref: /schemas/types.yaml#/definitions/flag
description:
If set, indicates the MDIO device does not correctly release
the turn around line low at end of the control phase of the
......
......@@ -42,7 +42,7 @@ properties:
- const: trans
mediatek,pericfg:
$ref: /schemas/types.yaml#definitions/phandle
$ref: /schemas/types.yaml#/definitions/phandle
description:
Phandle to the device containing the PERICFG register range. This is used
to control the MII mode.
......
......@@ -114,7 +114,7 @@ properties:
validating firwmare used by the GSI.
modem-remoteproc:
$ref: /schemas/types.yaml#definitions/phandle
$ref: /schemas/types.yaml#/definitions/phandle
description:
This defines the phandle to the remoteproc node representing
the modem subsystem. This is requied so the IPA driver can
......
......@@ -126,7 +126,7 @@ properties:
in a different mode than the PHY in order to function.
snps,axi-config:
$ref: /schemas/types.yaml#definitions/phandle
$ref: /schemas/types.yaml#/definitions/phandle
description:
AXI BUS Mode parameters. Phandle to a node that can contain the
following properties
......@@ -141,7 +141,7 @@ properties:
* snps,rb, rebuild INCRx Burst
snps,mtl-rx-config:
$ref: /schemas/types.yaml#definitions/phandle
$ref: /schemas/types.yaml#/definitions/phandle
description:
Multiple RX Queues parameters. Phandle to a node that can
contain the following properties
......@@ -164,7 +164,7 @@ properties:
* snps,priority, RX queue priority (Range 0x0 to 0xF)
snps,mtl-tx-config:
$ref: /schemas/types.yaml#definitions/phandle
$ref: /schemas/types.yaml#/definitions/phandle
description:
Multiple TX Queues parameters. Phandle to a node that can
contain the following properties
......@@ -198,7 +198,7 @@ properties:
snps,reset-active-low:
deprecated: true
$ref: /schemas/types.yaml#definitions/flag
$ref: /schemas/types.yaml#/definitions/flag
description:
Indicates that the PHY Reset is active low
......@@ -208,55 +208,55 @@ properties:
Triplet of delays. The 1st cell is reset pre-delay in micro
seconds. The 2nd cell is reset pulse in micro seconds. The 3rd
cell is reset post-delay in micro seconds.
$ref: /schemas/types.yaml#definitions/uint32-array
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 3
maxItems: 3
snps,aal:
$ref: /schemas/types.yaml#definitions/flag
$ref: /schemas/types.yaml#/definitions/flag
description:
Use Address-Aligned Beats
snps,fixed-burst:
$ref: /schemas/types.yaml#definitions/flag
$ref: /schemas/types.yaml#/definitions/flag
description:
Program the DMA to use the fixed burst mode
snps,mixed-burst:
$ref: /schemas/types.yaml#definitions/flag
$ref: /schemas/types.yaml#/definitions/flag
description:
Program the DMA to use the mixed burst mode
snps,force_thresh_dma_mode:
$ref: /schemas/types.yaml#definitions/flag
$ref: /schemas/types.yaml#/definitions/flag
description:
Force DMA to use the threshold mode for both tx and rx
snps,force_sf_dma_mode:
$ref: /schemas/types.yaml#definitions/flag
$ref: /schemas/types.yaml#/definitions/flag
description:
Force DMA to use the Store and Forward mode for both tx and
rx. This flag is ignored if force_thresh_dma_mode is set.
snps,en-tx-lpi-clockgating:
$ref: /schemas/types.yaml#definitions/flag
$ref: /schemas/types.yaml#/definitions/flag
description:
Enable gating of the MAC TX clock during TX low-power mode
snps,multicast-filter-bins:
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
description:
Number of multicast filter hash bins supported by this device
instance
snps,perfect-filter-entries:
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
description:
Number of perfect filter entries supported by this device
instance
snps,ps-speed:
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
description:
Port selection speed that can be passed to the core when PCS
is supported. For example, this is used in case of SGMII and
......@@ -307,25 +307,25 @@ allOf:
snps,pbl:
description:
Programmable Burst Length (tx and rx)
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
enum: [2, 4, 8]
snps,txpbl:
description:
Tx Programmable Burst Length. If set, DMA tx will use this
value rather than snps,pbl.
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
enum: [2, 4, 8]
snps,rxpbl:
description:
Rx Programmable Burst Length. If set, DMA rx will use this
value rather than snps,pbl.
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
enum: [2, 4, 8]
snps,no-pbl-x8:
$ref: /schemas/types.yaml#definitions/flag
$ref: /schemas/types.yaml#/definitions/flag
description:
Don\'t multiply the pbl/txpbl/rxpbl values by 8. For core
rev < 3.50, don\'t multiply the values by 4.
......@@ -351,7 +351,7 @@ allOf:
then:
properties:
snps,tso:
$ref: /schemas/types.yaml#definitions/flag
$ref: /schemas/types.yaml#/definitions/flag
description:
Enables the TSO feature otherwise it will be managed by
MAC HW capability register.
......
......@@ -64,7 +64,7 @@ properties:
- const: ether # for others
socionext,syscon-phy-mode:
$ref: /schemas/types.yaml#definitions/phandle-array
$ref: /schemas/types.yaml#/definitions/phandle-array
description:
A phandle to syscon with one argument that configures phy mode.
The argument is the ID of MAC instance.
......
......@@ -70,7 +70,7 @@ properties:
pinctrl-names: true
syscon:
$ref: /schemas/types.yaml#definitions/phandle
$ref: /schemas/types.yaml#/definitions/phandle
description:
Phandle to the system control device node which provides access to
efuse IO range with MAC addresses
......
......@@ -47,31 +47,31 @@ properties:
takes precedence.
tx-fifo-depth:
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
description: |
Transmitt FIFO depth see dt-bindings/net/ti-dp83867.h for values
rx-fifo-depth:
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
description: |
Receive FIFO depth see dt-bindings/net/ti-dp83867.h for values
ti,clk-output-sel:
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
description: |
Muxing option for CLK_OUT pin. See dt-bindings/net/ti-dp83867.h
for applicable values. The CLK_OUT pin can also be disabled by this
property. When omitted, the PHY's default will be left as is.
ti,rx-internal-delay:
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
description: |
RGMII Receive Clock Delay - see dt-bindings/net/ti-dp83867.h
for applicable values. Required only if interface type is
PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_RXID.
ti,tx-internal-delay:
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
description: |
RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h
for applicable values. Required only if interface type is
......@@ -101,7 +101,7 @@ properties:
ti,fifo-depth:
deprecated: true
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
description: |
Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h for applicable
values.
......
......@@ -44,22 +44,22 @@ properties:
to a maximum value (70 ohms).
tx-fifo-depth:
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
description: |
Transmitt FIFO depth see dt-bindings/net/ti-dp83869.h for values
rx-fifo-depth:
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
description: |
Receive FIFO depth see dt-bindings/net/ti-dp83869.h for values
ti,clk-output-sel:
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
description: |
Muxing option for CLK_OUT pin see dt-bindings/net/ti-dp83869.h for values.
ti,op-mode:
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
description: |
Operational mode for the PHY. If this is not set then the operational
mode is set by the straps. see dt-bindings/net/ti-dp83869.h for values
......
......@@ -119,12 +119,12 @@ properties:
description: label associated with this port
ti,mac-only:
$ref: /schemas/types.yaml#definitions/flag
$ref: /schemas/types.yaml#/definitions/flag
description:
Specifies the port works in mac-only mode.
ti,syscon-efuse:
$ref: /schemas/types.yaml#definitions/phandle-array
$ref: /schemas/types.yaml#/definitions/phandle-array
description:
Phandle to the system control device node which provides access
to efuse IO range with MAC addresses
......
......@@ -136,7 +136,7 @@ properties:
- const: tcl2host-status-ring
qcom,rproc:
$ref: /schemas/types.yaml#definitions/phandle
$ref: /schemas/types.yaml#/definitions/phandle
description:
DT entry of q6v5-wcss remoteproc driver.
Phandle to a node that can contain the following properties
......
......@@ -44,13 +44,13 @@ properties:
- const: refclk
syscon-phy-power:
$ref: /schemas/types.yaml#definitions/phandle-array
$ref: /schemas/types.yaml#/definitions/phandle-array
description:
phandle/offset pair. Phandle to the system control module and
register offset to power on/off the PHY.
ctrl-module:
$ref: /schemas/types.yaml#definitions/phandle
$ref: /schemas/types.yaml#/definitions/phandle
description:
(deprecated) phandle of the control module used by PHY driver
to power on the PHY. Use syscon-phy-power instead.
......
......@@ -83,11 +83,11 @@ patternProperties:
SUSBSYS clocks.
mediatek,infracfg:
$ref: /schemas/types.yaml#definitions/phandle
$ref: /schemas/types.yaml#/definitions/phandle
description: phandle to the device containing the INFRACFG register range.
mediatek,smi:
$ref: /schemas/types.yaml#definitions/phandle
$ref: /schemas/types.yaml#/definitions/phandle
description: phandle to the device containing the SMI register range.
patternProperties:
......@@ -131,11 +131,11 @@ patternProperties:
SUSBSYS clocks.
mediatek,infracfg:
$ref: /schemas/types.yaml#definitions/phandle
$ref: /schemas/types.yaml#/definitions/phandle
description: phandle to the device containing the INFRACFG register range.
mediatek,smi:
$ref: /schemas/types.yaml#definitions/phandle
$ref: /schemas/types.yaml#/definitions/phandle
description: phandle to the device containing the SMI register range.
patternProperties:
......@@ -179,11 +179,11 @@ patternProperties:
SUSBSYS clocks.
mediatek,infracfg:
$ref: /schemas/types.yaml#definitions/phandle
$ref: /schemas/types.yaml#/definitions/phandle
description: phandle to the device containing the INFRACFG register range.
mediatek,smi:
$ref: /schemas/types.yaml#definitions/phandle
$ref: /schemas/types.yaml#/definitions/phandle
description: phandle to the device containing the SMI register range.
required:
......
......@@ -27,7 +27,7 @@ properties:
of this binary blob is kept secret by CellWise. The only way to obtain
it is to mail two batteries to a test facility of CellWise and receive
back a test report with the binary blob.
$ref: /schemas/types.yaml#definitions/uint8-array
$ref: /schemas/types.yaml#/definitions/uint8-array
minItems: 64
maxItems: 64
......
......@@ -42,6 +42,6 @@ select: true
properties:
sleep:
$ref: /schemas/types.yaml#definitions/phandle-array
$ref: /schemas/types.yaml#/definitions/phandle-array
additionalProperties: true
......@@ -126,7 +126,7 @@ properties:
maxItems: 1
current-speed:
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
description: The current active speed of the UART.
reg-offset:
......@@ -154,7 +154,7 @@ properties:
Set to indicate that the port does not implement loopback test mode.
fifo-size:
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
description: The fifo size of the UART.
auto-flow-control:
......@@ -165,7 +165,7 @@ properties:
property.
tx-threshold:
$ref: /schemas/types.yaml#definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32
description: |
Specify the TX FIFO low water indication for parts with programmable
TX FIFO thresholds.
......
......@@ -55,7 +55,7 @@ properties:
description: TI-SCI RM subtype for GP ring range
ti,sci:
$ref: /schemas/types.yaml#definitions/phandle-array
$ref: /schemas/types.yaml#/definitions/phandle-array
description: phandle on TI-SCI compatible System controller node
ti,sci-dev-id:
......
......@@ -57,7 +57,7 @@ properties:
A list of the connections between audio components. Each entry
is a pair of strings, the first being the connection's sink, the
second being the connection's source.
$ref: /schemas/types.yaml#definitions/non-unique-string-array
$ref: /schemas/types.yaml#/definitions/non-unique-string-array
minItems: 2
maxItems: 18
items:
......
......@@ -106,7 +106,7 @@ patternProperties:
Must contain the phandle and index of the SAI sub-block providing
the synchronization.
allOf:
- $ref: /schemas/types.yaml#definitions/phandle-array
- $ref: /schemas/types.yaml#/definitions/phandle-array
- maxItems: 1
st,iec60958:
......@@ -117,7 +117,7 @@ patternProperties:
configured according to protocol defined in related DAI link node,
such as i2s, left justified, right justified, dsp and pdm protocols.
allOf:
- $ref: /schemas/types.yaml#definitions/flag
- $ref: /schemas/types.yaml#/definitions/flag
"#clock-cells":
description: Configure the SAI device as master clock provider.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment