pinctrl: fix several typos

use codespell to fix lots of typos over frontends.
Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
CC: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200421142402.9524-1-zhengdejin5@gmail.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

drivers/pinctrl/freescale/pinctrl-imx1-core.c

@@ -60,7 +60,7 @@ struct imx1_pinctrl {
 
 /*
  * IMX1 IOMUXC manages the pins based on ports. Each port has 32 pins. IOMUX
- * control register are seperated into function, output configuration, input
+ * control registers are separated into function, output configuration, input
  * configuration A, input configuration B, GPIO in use and data direction.
  *
  * Those controls that are represented by 1 bit have a direct mapping between

drivers/pinctrl/pinctrl-lantiq.c

@@ -221,7 +221,7 @@ static int match_mux(const struct ltq_mfp_pin *mfp, unsigned mux)
 	return i;
 }
 
-/* dont assume .mfp is linearly mapped. find the mfp with the correct .pin */
+/* don't assume .mfp is linearly mapped. find the mfp with the correct .pin */
 static int match_mfp(const struct ltq_pinmux_info *info, int pin)
 {
 	int i;

drivers/pinctrl/pinctrl-sx150x.c

@@ -988,7 +988,7 @@ static unsigned int sx150x_maybe_swizzle(struct sx150x_pinctrl *pctl,
 /*
  * In order to mask the differences between 16 and 8 bit expander
  * devices we set up a sligthly ficticious regmap that pretends to be
- * a set of 32-bit (to accomodate RegSenseLow/RegSenseHigh
+ * a set of 32-bit (to accommodate RegSenseLow/RegSenseHigh
  * pair/quartet) registers and transparently reconstructs those
  * registers via multiple I2C/SMBus reads
  *

drivers/pinctrl/sh-pfc/pfc-sh7269.c

@@ -1963,8 +1963,9 @@ static const struct pinmux_func pinmux_func_gpios[] = {
 static const struct pinmux_cfg_reg pinmux_config_regs[] = {
 	/* "name" addr register_size Field_Width */
 
-	/* where Field_Width is 1 for single mode registers or 4 for upto 16
-	   mode registers and modes are described in assending order [0..16] */
+	/* where Field_Width is 1 for single mode registers or 4 for up to 16
+	 * mode registers and modes are described in assending order [0..15]
+	 */
 
 	{ PINMUX_CFG_REG("PAIOR0", 0xfffe3812, 16, 1, GROUP(
 		0, 0, 0, 0, 0, 0, 0, 0,

drivers/pinctrl/tegra/pinctrl-tegra-xusb.c

@@ -123,7 +123,7 @@ static int tegra_xusb_padctl_get_group_pins(struct pinctrl_dev *pinctrl,
 					    unsigned *num_pins)
 {
 	/*
-	 * For the tegra-xusb pad controller groups are synonomous
+	 * For the tegra-xusb pad controller groups are synonymous
 	 * with lanes/pins and there is always one lane/pin per group.
 	 */
 	*pins = &pinctrl->desc->pins[group].number;

drivers/pinctrl/zte/pinctrl-zx.c

@@ -94,7 +94,7 @@ static int zx_set_mux(struct pinctrl_dev *pctldev, unsigned int func_selector,
 	if (data->aon_pin) {
 		/*
 		 * It's an AON pin, whose mux register offset and bit position
-		 * can be caluculated from pin number.  Each register covers 16
+		 * can be calculated from pin number.  Each register covers 16
 		 * pins, and each pin occupies 2 bits.
 		 */
 		u16 aoffset = pindesc->number / 16 * 4;