usb: cdc_acm: Add quirk for Elatec TWN3

commit 765fb2f1 upstream.

Elatec TWN3 has the union descriptor on data interface. This results in
failure to bind the device to the driver with the following log:
  usb 1-1.2: new full speed USB device using streamplug-ehci and address 4
  usb 1-1.2: New USB device found, idVendor=09d8, idProduct=0320
  usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  usb 1-1.2: Product: RFID Device (COM)
  usb 1-1.2: Manufacturer: OEM
  cdc_acm 1-1.2:1.0: Zero length descriptor references
  cdc_acm: probe of 1-1.2:1.0 failed with error -22

Adding the NO_UNION_NORMAL quirk for the device fixes the issue.

`lsusb -v` of the device:

Bus 001 Device 003: ID 09d8:0320
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            2 Communications
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        32
  idVendor           0x09d8
  idProduct          0x0320
  bcdDevice            3.00
  iManufacturer           1 OEM
  iProduct                2 RFID Device (COM)
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           67
    bNumInterfaces          2
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              250mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      2 Abstract (modem)
      bInterfaceProtocol      1 AT-commands (v.25ter)
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0020  1x 32 bytes
        bInterval               2
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0020  1x 32 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0020  1x 32 bytes
        bInterval               0
      CDC Header:
        bcdCDC               1.10
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          1
      CDC ACM:
        bmCapabilities       0x06
          sends break
          line coding and serial state
      CDC Union:
        bMasterInterface        0
        bSlaveInterface         1
Device Status:     0x0000
  (Bus Powered)
Signed-off-by: Maksim Salau <msalau@iotecha.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/class/cdc-acm.c

@@ -1762,6 +1762,9 @@ static const struct usb_device_id acm_ids[] = {
 	{ USB_DEVICE(0xfff0, 0x0100), /* DATECS FP-2000 */
 	.driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
 	},
+	{ USB_DEVICE(0x09d8, 0x0320), /* Elatec GmbH TWN3 */
+	.driver_info = NO_UNION_NORMAL, /* has misplaced union descriptor */
+	},
 
 	{ USB_DEVICE(0x2912, 0x0001), /* ATOL FPrint */
 	.driver_info = CLEAR_HALT_CONDITIONS,