Commit d7bd40ae authored by Dan Murphy's avatar Dan Murphy Committed by Mark Brown

ASoC: tas2562: Add right and left channel slot programming

Add programming for the tdm slots for the right and left. This also
requires configuring the RX/TX offsets for the DAI format type.
Signed-off-by: default avatarDan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200626154143.20351-1-dmurphy@ti.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent 4946cd45
......@@ -175,7 +175,37 @@ static int tas2562_set_dai_tdm_slot(struct snd_soc_dai *dai,
{
struct snd_soc_component *component = dai->component;
struct tas2562_data *tas2562 = snd_soc_component_get_drvdata(component);
int ret = 0;
int left_slot, right_slot;
int slots_cfg;
int ret;
if (!tx_mask) {
dev_err(component->dev, "tx masks must not be 0\n");
return -EINVAL;
}
if (slots == 1) {
if (tx_mask != 1)
return -EINVAL;
left_slot = 0;
right_slot = 0;
} else {
left_slot = __ffs(tx_mask);
tx_mask &= ~(1 << left_slot);
if (tx_mask == 0) {
right_slot = left_slot;
} else {
right_slot = __ffs(tx_mask);
tx_mask &= ~(1 << right_slot);
}
}
slots_cfg = (right_slot << TAS2562_RIGHT_SLOT_SHIFT) | left_slot;
ret = snd_soc_component_write(component, TAS2562_TDM_CFG3, slots_cfg);
if (ret < 0)
return ret;
switch (slot_width) {
case 16:
......@@ -208,6 +238,18 @@ static int tas2562_set_dai_tdm_slot(struct snd_soc_dai *dai,
if (ret < 0)
return ret;
ret = snd_soc_component_update_bits(component, TAS2562_TDM_CFG5,
TAS2562_TDM_CFG5_VSNS_SLOT_MASK,
tas2562->v_sense_slot);
if (ret < 0)
return ret;
ret = snd_soc_component_update_bits(component, TAS2562_TDM_CFG6,
TAS2562_TDM_CFG6_ISNS_SLOT_MASK,
tas2562->i_sense_slot);
if (ret < 0)
return ret;
return 0;
}
......@@ -285,7 +327,8 @@ static int tas2562_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt)
{
struct snd_soc_component *component = dai->component;
struct tas2562_data *tas2562 = snd_soc_component_get_drvdata(component);
u8 tdm_rx_start_slot = 0, asi_cfg_1 = 0;
u8 asi_cfg_1 = 0;
u8 tdm_rx_start_slot = 0;
int ret;
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
......@@ -307,27 +350,23 @@ static int tas2562_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt)
dev_err(tas2562->dev, "Failed to set RX edge\n");
return ret;
}
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case (SND_SOC_DAIFMT_I2S):
case (SND_SOC_DAIFMT_DSP_A):
case (SND_SOC_DAIFMT_DSP_B):
tdm_rx_start_slot = BIT(1);
break;
case (SND_SOC_DAIFMT_LEFT_J):
case SND_SOC_DAIFMT_LEFT_J:
case SND_SOC_DAIFMT_DSP_B:
tdm_rx_start_slot = 0;
break;
default:
dev_err(tas2562->dev, "DAI Format is not found, fmt=0x%x\n",
fmt);
ret = -EINVAL;
case SND_SOC_DAIFMT_I2S:
case SND_SOC_DAIFMT_DSP_A:
tdm_rx_start_slot = 1;
break;
default:
dev_err(tas2562->dev,
"DAI Format is not found, fmt=0x%x\n", fmt);
return -EINVAL;
}
ret = snd_soc_component_update_bits(component, TAS2562_TDM_CFG1,
TAS2562_TDM_CFG1_RX_OFFSET_MASK,
tdm_rx_start_slot);
TAS2562_RX_OFF_MASK, (tdm_rx_start_slot << 1));
if (ret < 0)
return ret;
......
......@@ -34,6 +34,10 @@
#define TAS2562_TDM_DET TAS2562_REG(0, 0x11)
#define TAS2562_REV_ID TAS2562_REG(0, 0x7d)
#define TAS2562_RX_OFF_MASK GENMASK(5, 1)
#define TAS2562_TX_OFF_MASK GENMASK(3, 1)
#define TAS2562_RIGHT_SLOT_SHIFT 4
/* Page 2 */
#define TAS2562_DVC_CFG1 TAS2562_REG(2, 0x0c)
#define TAS2562_DVC_CFG2 TAS2562_REG(2, 0x0d)
......@@ -49,7 +53,6 @@
#define TAS2562_TDM_CFG1_RX_EDGE_MASK BIT(0)
#define TAS2562_TDM_CFG1_RX_FALLING 1
#define TAS2562_TDM_CFG1_RX_OFFSET_MASK GENMASK(4, 0)
#define TAS2562_TDM_CFG0_RAMPRATE_MASK BIT(5)
#define TAS2562_TDM_CFG0_RAMPRATE_44_1 BIT(5)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment