drm/radeon/kms: Create asic structure for r300 pcie cards.

Setting global asic structure to point to different function
would cause problem in system where is multiple r300 cards
with different bus type.

r300_asic_pcie is just copy from r300_asic with gart tlb
functions replaced with pcie versions.
Signed-off-by: Pauli Nieminen <suokkos@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drivers/gpu/drm/radeon/radeon_asic.h

@@ -183,6 +183,44 @@ static struct radeon_asic r300_asic = {
 	.ioctl_wait_idle = NULL,
 };
 
+
+static struct radeon_asic r300_asic_pcie = {
+	.init = &r300_init,
+	.fini = &r300_fini,
+	.suspend = &r300_suspend,
+	.resume = &r300_resume,
+	.vga_set_state = &r100_vga_set_state,
+	.gpu_reset = &r300_gpu_reset,
+	.gart_tlb_flush = &rv370_pcie_gart_tlb_flush,
+	.gart_set_page = &rv370_pcie_gart_set_page,
+	.cp_commit = &r100_cp_commit,
+	.ring_start = &r300_ring_start,
+	.ring_test = &r100_ring_test,
+	.ring_ib_execute = &r100_ring_ib_execute,
+	.irq_set = &r100_irq_set,
+	.irq_process = &r100_irq_process,
+	.get_vblank_counter = &r100_get_vblank_counter,
+	.fence_ring_emit = &r300_fence_ring_emit,
+	.cs_parse = &r300_cs_parse,
+	.copy_blit = &r100_copy_blit,
+	.copy_dma = &r200_copy_dma,
+	.copy = &r100_copy_blit,
+	.get_engine_clock = &radeon_legacy_get_engine_clock,
+	.set_engine_clock = &radeon_legacy_set_engine_clock,
+	.get_memory_clock = &radeon_legacy_get_memory_clock,
+	.set_memory_clock = NULL,
+	.set_pcie_lanes = &rv370_set_pcie_lanes,
+	.set_clock_gating = &radeon_legacy_set_clock_gating,
+	.set_surface_reg = r100_set_surface_reg,
+	.clear_surface_reg = r100_clear_surface_reg,
+	.bandwidth_update = &r100_bandwidth_update,
+	.hpd_init = &r100_hpd_init,
+	.hpd_fini = &r100_hpd_fini,
+	.hpd_sense = &r100_hpd_sense,
+	.hpd_set_polarity = &r100_hpd_set_polarity,
+	.ioctl_wait_idle = NULL,
+};
+
 /*
  * r420,r423,rv410
  */

drivers/gpu/drm/radeon/radeon_device.c

@@ -350,11 +350,10 @@ int radeon_asic_init(struct radeon_device *rdev)
 	case CHIP_R350:
 	case CHIP_RV350:
 	case CHIP_RV380:
-		rdev->asic = &r300_asic;
-		if (rdev->flags & RADEON_IS_PCIE) {
-			rdev->asic->gart_tlb_flush = &rv370_pcie_gart_tlb_flush;
-			rdev->asic->gart_set_page = &rv370_pcie_gart_set_page;
-		}
+		if (rdev->flags & RADEON_IS_PCIE)
+			rdev->asic = &r300_asic_pcie;
+		else
+			rdev->asic = &r300_asic;
 		break;
 	case CHIP_R420:
 	case CHIP_R423: