Commit d846abff authored by Daniele Alessandrelli's avatar Daniele Alessandrelli Committed by Arnd Bergmann

arm64: dts: keembay: Add device tree for Keem Bay EVM board

Add initial device tree for Keem Bay EVM board. With this minimal device
tree the board boots fine using an initramfs image.

Link: https://lore.kernel.org/r/20200717090414.313530-6-daniele.alessandrelli@linux.intel.comReviewed-by: default avatarDinh Nguyen <dinguyen@kernel.org>
Signed-off-by: default avatarDaniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parent 0a6e92f2
...@@ -1959,6 +1959,7 @@ M: Paul J. Murphy <paul.j.murphy@intel.com> ...@@ -1959,6 +1959,7 @@ M: Paul J. Murphy <paul.j.murphy@intel.com>
M: Daniele Alessandrelli <daniele.alessandrelli@intel.com> M: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
S: Maintained S: Maintained
F: Documentation/devicetree/bindings/arm/intel,keembay.yaml F: Documentation/devicetree/bindings/arm/intel,keembay.yaml
F: arch/arm64/boot/dts/intel/keembay-evm.dts
F: arch/arm64/boot/dts/intel/keembay-soc.dtsi F: arch/arm64/boot/dts/intel/keembay-soc.dtsi
ARM/INTEL RESEARCH IMOTE/STARGATE 2 MACHINE SUPPORT ARM/INTEL RESEARCH IMOTE/STARGATE 2 MACHINE SUPPORT
......
# SPDX-License-Identifier: GPL-2.0-only # SPDX-License-Identifier: GPL-2.0-only
dtb-$(CONFIG_ARCH_AGILEX) += socfpga_agilex_socdk.dtb \ dtb-$(CONFIG_ARCH_AGILEX) += socfpga_agilex_socdk.dtb \
socfpga_agilex_socdk_nand.dtb socfpga_agilex_socdk_nand.dtb
dtb-$(CONFIG_ARCH_KEEMBAY) += keembay-evm.dtb
// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
/*
* Copyright (C) 2020, Intel Corporation
*
* Device tree describing Keem Bay EVM board.
*/
/dts-v1/;
#include "keembay-soc.dtsi"
/ {
model = "Keem Bay EVM";
compatible = "intel,keembay-evm", "intel,keembay";
#address-cells = <2>;
#size-cells = <2>;
aliases {
serial0 = &uart3;
};
chosen {
stdout-path = "serial0:115200n8";
};
memory@80000000 {
device_type = "memory";
/* 2GB of DDR memory. */
reg = <0x0 0x80000000 0x0 0x80000000>;
};
};
&uart3 {
status = "okay";
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment