cxgb4: handle interrupt raised when FW crashes

Handle TIMER0INT when FW crashes. Check for PCIE_FW[FW_EVAL]
and if it says "Device FW Crashed", then treat it as fatal.
Else, non-fatal.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/chelsio/cxgb4/t4_hw.c

@@ -4040,6 +4040,7 @@ static void cim_intr_handler(struct adapter *adapter)
 		{ MBHOSTPARERR_F, "CIM mailbox host parity error", -1, 1 },
 		{ TIEQINPARERRINT_F, "CIM TIEQ outgoing parity error", -1, 1 },
 		{ TIEQOUTPARERRINT_F, "CIM TIEQ incoming parity error", -1, 1 },
+		{ TIMER0INT_F, "CIM TIMER0 interrupt", -1, 1 },
 		{ 0 }
 	};
 	static const struct intr_info cim_upintr_info[] = {
@@ -4074,11 +4075,27 @@ static void cim_intr_handler(struct adapter *adapter)
 		{ 0 }
 	};
 
+	u32 val, fw_err;
 	int fat;
 
-	if (t4_read_reg(adapter, PCIE_FW_A) & PCIE_FW_ERR_F)
+	fw_err = t4_read_reg(adapter, PCIE_FW_A);
+	if (fw_err & PCIE_FW_ERR_F)
 		t4_report_fw_error(adapter);
 
+	/* When the Firmware detects an internal error which normally
+	 * wouldn't raise a Host Interrupt, it forces a CIM Timer0 interrupt
+	 * in order to make sure the Host sees the Firmware Crash.  So
+	 * if we have a Timer0 interrupt and don't see a Firmware Crash,
+	 * ignore the Timer0 interrupt.
+	 */
+
+	val = t4_read_reg(adapter, CIM_HOST_INT_CAUSE_A);
+	if (val & TIMER0INT_F)
+		if (!(fw_err & PCIE_FW_ERR_F) ||
+		    (PCIE_FW_EVAL_G(fw_err) != PCIE_FW_EVAL_CRASH))
+			t4_write_reg(adapter, CIM_HOST_INT_CAUSE_A,
+				     TIMER0INT_F);
+
 	fat = t4_handle_intr_status(adapter, CIM_HOST_INT_CAUSE_A,
 				    cim_intr_info) +
 	      t4_handle_intr_status(adapter, CIM_HOST_UPACC_INT_CAUSE_A,

drivers/net/ethernet/chelsio/cxgb4/t4_regs.h

@@ -1077,6 +1077,10 @@
 #define TIEQINPARERRINT_V(x) ((x) << TIEQINPARERRINT_S)
 #define TIEQINPARERRINT_F    TIEQINPARERRINT_V(1U)
 
+#define TIMER0INT_S    2
+#define TIMER0INT_V(x) ((x) << TIMER0INT_S)
+#define TIMER0INT_F    TIMER0INT_V(1U)
+
 #define PREFDROPINT_S    1
 #define PREFDROPINT_V(x) ((x) << PREFDROPINT_S)
 #define PREFDROPINT_F    PREFDROPINT_V(1U)

drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h

@@ -3088,6 +3088,10 @@ struct fw_debug_cmd {
 #define FW_DEBUG_CMD_TYPE_G(x)	\
 	(((x) >> FW_DEBUG_CMD_TYPE_S) & FW_DEBUG_CMD_TYPE_M)
 
+enum pcie_fw_eval {
+	PCIE_FW_EVAL_CRASH = 0,
+};
+
 #define PCIE_FW_ERR_S		31
 #define PCIE_FW_ERR_V(x)	((x) << PCIE_FW_ERR_S)
 #define PCIE_FW_ERR_F		PCIE_FW_ERR_V(1U)