Commit d8ac71d2 authored by Geert Uytterhoeven's avatar Geert Uytterhoeven

arm64: dts: renesas: r8a779g0: Add thermal nodes

Add device nodes for the Thermal Sensor/Chip Internal Voltage
Monitor/Core Voltage Monitor (THS/CIVM/CVM) and the various thermal
zones on the Renesas R-Car V4H (R8A779G0) SoC.
Signed-off-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: default avatarWolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: default avatarNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/b92a1a28afb9f75f24f0137af9f77e95d7ebaec3.1675959327.git.geert+renesas@glider.be
parent 6ec57913
......@@ -438,6 +438,18 @@ sysc: system-controller@e6180000 {
#power-domain-cells = <1>;
};
tsc: thermal@e6198000 {
compatible = "renesas,r8a779g0-thermal";
reg = <0 0xe6198000 0 0x200>,
<0 0xe61a0000 0 0x200>,
<0 0xe61a8000 0 0x200>,
<0 0xe61b0000 0 0x200>;
clocks = <&cpg CPG_MOD 919>;
power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
resets = <&cpg 919>;
#thermal-sensor-cells = <1>;
};
intc_ex: interrupt-controller@e61c0000 {
compatible = "renesas,intc-ex-r8a779g0", "renesas,irqc";
#interrupt-cells = <2>;
......@@ -1401,6 +1413,64 @@ prr: chipid@fff00044 {
};
};
thermal-zones {
sensor_thermal_cr52: sensor1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 0>;
trips {
sensor1_crit: sensor1-crit {
temperature = <120000>;
hysteresis = <1000>;
type = "critical";
};
};
};
sensor_thermal_cnn: sensor2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 1>;
trips {
sensor2_crit: sensor2-crit {
temperature = <120000>;
hysteresis = <1000>;
type = "critical";
};
};
};
sensor_thermal_ca76: sensor3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 2>;
trips {
sensor3_crit: sensor3-crit {
temperature = <120000>;
hysteresis = <1000>;
type = "critical";
};
};
};
sensor_thermal_ddr1: sensor4-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 3>;
trips {
sensor4_crit: sensor4-crit {
temperature = <120000>;
hysteresis = <1000>;
type = "critical";
};
};
};
};
timer {
compatible = "arm,armv8-timer";
interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment