bnx2x: remove ndo_poll_controller

As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.

bnx2x uses NAPI for TX completions, so we better let core
networking stack call the napi->poll() to avoid the capture.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c

@@ -12894,19 +12894,6 @@ static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 	}
 }
 
-#ifdef CONFIG_NET_POLL_CONTROLLER
-static void poll_bnx2x(struct net_device *dev)
-{
-	struct bnx2x *bp = netdev_priv(dev);
-	int i;
-
-	for_each_eth_queue(bp, i) {
-		struct bnx2x_fastpath *fp = &bp->fp[i];
-		napi_schedule(&bnx2x_fp(bp, fp->index, napi));
-	}
-}
-#endif
-
 static int bnx2x_validate_addr(struct net_device *dev)
 {
 	struct bnx2x *bp = netdev_priv(dev);
@@ -13113,9 +13100,6 @@ static const struct net_device_ops bnx2x_netdev_ops = {
 	.ndo_tx_timeout		= bnx2x_tx_timeout,
 	.ndo_vlan_rx_add_vid	= bnx2x_vlan_rx_add_vid,
 	.ndo_vlan_rx_kill_vid	= bnx2x_vlan_rx_kill_vid,
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	.ndo_poll_controller	= poll_bnx2x,
-#endif
 	.ndo_setup_tc		= __bnx2x_setup_tc,
 #ifdef CONFIG_BNX2X_SRIOV
 	.ndo_set_vf_mac		= bnx2x_set_vf_mac,