[POWERPC] 83xx: mpc832x mds: Fix board PHY reset code

currently the board-level PHY reset code for the mpc832x MDS messes with
reset configuration words source settings which is plain wrong (it
looks like this board code was cut-n-pasted from the mpc8360 mds code,
which has the PHY reset bits in a different BCSR); this patch points
the PHY reset code to the proper mpc832x mds PHY reset bits in the BCSR.
Signed-off-by: Peter Van Ackeren <peter.vanackeren@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

arch/powerpc/platforms/83xx/mpc832x_mds.c

@@ -90,10 +90,11 @@ static void __init mpc832x_sys_setup_arch(void)
 
 	if ((np = of_find_compatible_node(NULL, "network", "ucc_geth"))
 			!= NULL){
-		/* Reset the Ethernet PHY */
-		bcsr_regs[9] &= ~0x20;
+		/* Reset the Ethernet PHYs */
+#define BCSR8_FETH_RST 0x50
+		bcsr_regs[8] &= ~BCSR8_FETH_RST;
 		udelay(1000);
-		bcsr_regs[9] |= 0x20;
+		bcsr_regs[8] |= BCSR8_FETH_RST;
 		iounmap(bcsr_regs);
 		of_node_put(np);
 	}