Merge branch 'ux500/cleanup' into next/drivers

Patches from Lee Jones:

This gets rid of  mop500_snowball_ethernet_clock_enable() which is no
longer in use. It also straightens out a bug which ensures the SMSC911x's
regulator is turned on at start-up when using Device Tree.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/boot/dts/dbx5x0.dtsi

@@ -326,6 +326,11 @@ ab8500 {
 				interrupt-controller;
 				#interrupt-cells = <2>;
 
+				ab8500_gpio: ab8500-gpio {
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+
 				ab8500-rtc {
 					compatible = "stericsson,ab8500-rtc";
 					interrupts = <17 0x4

arch/arm/boot/dts/snowball.dts

@@ -22,12 +22,13 @@ memory {
 
 	en_3v3_reg: en_3v3 {
 		compatible = "regulator-fixed";
-                regulator-name = "en-3v3-fixed-supply";
-                regulator-min-microvolt = <3300000>;
-                regulator-max-microvolt = <3300000>;
-                gpios = <&gpio0 26  0x4>; // 26
-                startup-delay-us = <5000>;
-                enable-active-high;
+		regulator-name = "en-3v3-fixed-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		/* AB8500 GPIOs start from 1 - offset 25 is GPIO26. */
+		gpio = <&ab8500_gpio 25 0x4>;
+		startup-delay-us = <5000>;
+		enable-active-high;
 	};
 
 	gpio_keys {

arch/arm/mach-ux500/board-mop500.c

@@ -413,15 +413,6 @@ static void mop500_prox_deactivate(struct device *dev)
 	regulator_put(prox_regulator);
 }
 
-void mop500_snowball_ethernet_clock_enable(void)
-{
-	struct clk *clk;
-
-	clk = clk_get_sys("fsmc", NULL);
-	if (!IS_ERR(clk))
-		clk_prepare_enable(clk);
-}
-
 static struct cryp_platform_data u8500_cryp1_platform_data = {
 		.mem_to_engine = {
 				.dir = DMA_MEM_TO_DEV,
@@ -635,8 +626,6 @@ static void __init snowball_init_machine(void)
 	mop500_audio_init(parent);
 	mop500_uart_init(parent);
 
-	mop500_snowball_ethernet_clock_enable();
-
 	u8500_cryp1_hash1_init(parent);
 
 	/* This board has full regulator constraints */

arch/arm/mach-ux500/board-mop500.h

@@ -105,7 +105,6 @@ void __init mop500_pinmaps_init(void);
 void __init snowball_pinmaps_init(void);
 void __init hrefv60_pinmaps_init(void);
 void mop500_audio_init(struct device *parent);
-void mop500_snowball_ethernet_clock_enable(void);
 
 int __init mop500_uib_init(void);
 void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,

arch/arm/mach-ux500/cpu-db8500.c

@@ -279,7 +279,6 @@ static void __init u8500_init_machine(void)
 		mop500_pinmaps_init();
 	else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
 		snowball_pinmaps_init();
-		mop500_snowball_ethernet_clock_enable();
 	} else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
 		hrefv60_pinmaps_init();
 	else if (of_machine_is_compatible("st-ericsson,ccu9540")) {}