Commit d926793c authored by Nick Child's avatar Nick Child Committed by David S. Miller

ibmveth: Implement multi queue on xmit

The `ndo_start_xmit` function is protected by a spinlock on the tx queue
being used to transmit the skb. Allow concurrent calls to
`ndo_start_xmit` by using more than one tx queue. This allows for
greater throughput when several jobs are trying to transmit data.

Introduce 16 tx queues (leave single rx queue as is) which each
correspond to one DMA mapped long term buffer.
Signed-off-by: default avatarNick Child <nnac123@linux.ibm.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent d6832ca4
......@@ -538,20 +538,22 @@ static int ibmveth_open(struct net_device *netdev)
goto out_unmap_buffer_list;
}
adapter->tx_ltb_size = PAGE_ALIGN(IBMVETH_MAX_TX_BUF_SIZE);
adapter->tx_ltb_ptr = kzalloc(adapter->tx_ltb_size, GFP_KERNEL);
if (!adapter->tx_ltb_ptr) {
netdev_err(netdev,
"unable to allocate transmit long term buffer\n");
goto out_unmap_buffer_list;
}
adapter->tx_ltb_dma = dma_map_single(dev, adapter->tx_ltb_ptr,
adapter->tx_ltb_size,
DMA_TO_DEVICE);
if (dma_mapping_error(dev, adapter->tx_ltb_dma)) {
netdev_err(netdev,
"unable to DMA map transmit long term buffer\n");
goto out_unmap_tx_dma;
for (i = 0; i < IBMVETH_MAX_QUEUES; i++) {
adapter->tx_ltb_ptr[i] = kzalloc(adapter->tx_ltb_size,
GFP_KERNEL);
if (!adapter->tx_ltb_ptr[i]) {
netdev_err(netdev,
"unable to allocate transmit long term buffer\n");
goto out_free_tx_ltb_ptrs;
}
adapter->tx_ltb_dma[i] = dma_map_single(dev,
adapter->tx_ltb_ptr[i],
adapter->tx_ltb_size,
DMA_TO_DEVICE);
if (dma_mapping_error(dev, adapter->tx_ltb_dma[i])) {
netdev_err(netdev, "unable to DMA map transmit long term buffer\n");
goto out_unmap_tx_dma;
}
}
adapter->rx_queue.index = 0;
......@@ -614,7 +616,7 @@ static int ibmveth_open(struct net_device *netdev)
netdev_dbg(netdev, "initial replenish cycle\n");
ibmveth_interrupt(netdev->irq, netdev);
netif_start_queue(netdev);
netif_tx_start_all_queues(netdev);
netdev_dbg(netdev, "open complete\n");
......@@ -631,7 +633,14 @@ static int ibmveth_open(struct net_device *netdev)
DMA_BIDIRECTIONAL);
out_unmap_tx_dma:
kfree(adapter->tx_ltb_ptr);
kfree(adapter->tx_ltb_ptr[i]);
out_free_tx_ltb_ptrs:
while (--i >= 0) {
dma_unmap_single(dev, adapter->tx_ltb_dma[i],
adapter->tx_ltb_size, DMA_TO_DEVICE);
kfree(adapter->tx_ltb_ptr[i]);
}
out_unmap_buffer_list:
dma_unmap_single(dev, adapter->buffer_list_dma, 4096,
......@@ -661,7 +670,7 @@ static int ibmveth_close(struct net_device *netdev)
napi_disable(&adapter->napi);
if (!adapter->pool_config)
netif_stop_queue(netdev);
netif_tx_stop_all_queues(netdev);
h_vio_signal(adapter->vdev->unit_address, VIO_IRQ_DISABLE);
......@@ -695,9 +704,11 @@ static int ibmveth_close(struct net_device *netdev)
ibmveth_free_buffer_pool(adapter,
&adapter->rx_buff_pool[i]);
dma_unmap_single(dev, adapter->tx_ltb_dma, adapter->tx_ltb_size,
DMA_TO_DEVICE);
kfree(adapter->tx_ltb_ptr);
for (i = 0; i < IBMVETH_MAX_QUEUES; i++) {
dma_unmap_single(dev, adapter->tx_ltb_dma[i],
adapter->tx_ltb_size, DMA_TO_DEVICE);
kfree(adapter->tx_ltb_ptr[i]);
}
netdev_dbg(netdev, "close complete\n");
......@@ -1027,15 +1038,13 @@ static netdev_tx_t ibmveth_start_xmit(struct sk_buff *skb,
struct net_device *netdev)
{
struct ibmveth_adapter *adapter = netdev_priv(netdev);
unsigned int desc_flags;
unsigned int desc_flags, total_bytes;
union ibmveth_buf_desc desc;
int i;
int i, queue_num = skb_get_queue_mapping(skb);
unsigned long mss = 0;
size_t total_bytes;
if (ibmveth_is_packet_unsupported(skb, netdev))
goto out;
/* veth can't checksum offload UDP */
if (skb->ip_summed == CHECKSUM_PARTIAL &&
((skb->protocol == htons(ETH_P_IP) &&
......@@ -1088,14 +1097,14 @@ static netdev_tx_t ibmveth_start_xmit(struct sk_buff *skb,
netdev->stats.tx_dropped++;
goto out;
}
memcpy(adapter->tx_ltb_ptr, skb->data, skb_headlen(skb));
memcpy(adapter->tx_ltb_ptr[queue_num], skb->data, skb_headlen(skb));
total_bytes = skb_headlen(skb);
/* Copy frags into mapped buffers */
for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
const skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
memcpy(adapter->tx_ltb_ptr + total_bytes, skb_frag_address_safe(frag),
skb_frag_size(frag));
memcpy(adapter->tx_ltb_ptr[queue_num] + total_bytes,
skb_frag_address_safe(frag), skb_frag_size(frag));
total_bytes += skb_frag_size(frag);
}
......@@ -1106,7 +1115,7 @@ static netdev_tx_t ibmveth_start_xmit(struct sk_buff *skb,
goto out;
}
desc.fields.flags_len = desc_flags | skb->len;
desc.fields.address = adapter->tx_ltb_dma;
desc.fields.address = adapter->tx_ltb_dma[queue_num];
/* finish writing to long_term_buff before VIOS accessing it */
dma_wmb();
......@@ -1599,7 +1608,7 @@ static int ibmveth_probe(struct vio_dev *dev, const struct vio_device_id *id)
return -EINVAL;
}
netdev = alloc_etherdev(sizeof(struct ibmveth_adapter));
netdev = alloc_etherdev_mqs(sizeof(struct ibmveth_adapter), IBMVETH_MAX_QUEUES, 1);
if (!netdev)
return -ENOMEM;
......@@ -1666,6 +1675,8 @@ static int ibmveth_probe(struct vio_dev *dev, const struct vio_device_id *id)
kobject_uevent(kobj, KOBJ_ADD);
}
adapter->tx_ltb_size = PAGE_ALIGN(IBMVETH_MAX_TX_BUF_SIZE);
netdev_dbg(netdev, "adapter @ 0x%p\n", adapter);
netdev_dbg(netdev, "registering netdev...\n");
......
......@@ -99,6 +99,7 @@ static inline long h_illan_attributes(unsigned long unit_address,
#define IBMVETH_FILT_LIST_SIZE 4096
#define IBMVETH_MAX_BUF_SIZE (1024 * 128)
#define IBMVETH_MAX_TX_BUF_SIZE (1024 * 64)
#define IBMVETH_MAX_QUEUES 16U
static int pool_size[] = { 512, 1024 * 2, 1024 * 16, 1024 * 32, 1024 * 64 };
static int pool_count[] = { 256, 512, 256, 256, 256 };
......@@ -138,9 +139,9 @@ struct ibmveth_adapter {
unsigned int mcastFilterSize;
void * buffer_list_addr;
void * filter_list_addr;
void *tx_ltb_ptr;
void *tx_ltb_ptr[IBMVETH_MAX_QUEUES];
unsigned int tx_ltb_size;
dma_addr_t tx_ltb_dma;
dma_addr_t tx_ltb_dma[IBMVETH_MAX_QUEUES];
dma_addr_t buffer_list_dma;
dma_addr_t filter_list_dma;
struct ibmveth_buff_pool rx_buff_pool[IBMVETH_NUM_BUFF_POOLS];
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment