PM6125 regulator support

Merge series from Iskren Chernev <iskren.chernev@gmail.com>:

This patch series adds SPMI and SMD regulator support for the PM6125 found on
SM4250/SM6115 SoCs from QCom.

This code has been tested on:
* OnePlus Nord N100 (oneplus,billie2, SoC sm4250)
* Redmi 9T (redmi,lemon, SoC sm6115)

The main source used for this change is qpnp pm6125 support patch from caf [1]:

[1]: https://source.codeaurora.org/quic/la/kernel/msm-5.4/commit/?h=kernel.lnx.5.4.r1-rel&id=d1220daeffaa440ffff0a8c47322eb0033bf54f5

v3: https://lkml.org/lkml/2022/7/31/303
v2: https://lkml.org/lkml/2022/7/26/885
v1: https://lkml.org/lkml/2021/8/28/144

Changes from v3:
- fix compilation issue reported by kernel test robot
- reorder HFSMPS/LDO+FTSMPS patches
- add new slew-rate computation for HFSMPS
- add proper pull-down support for new regs
- name new regs/vals after HFSMPS instead of FTSMPS
- address indentation/newline issues reported by Krzysztof
- improve commit messages on SPMI/RPM related patches
Changes from v2:
- split spmi new regulator support in 2 patches
- FTS and LDOs now have set_load and set_pull_down ops
- add better commit messages on spmi patches
- fix sob header order
- fix tested device info (Redmi 9T, NOT Xiaomi 9T)
- improve formatting in spmi binding docs
- sort alphabetically in smd binding docs
- sort alphabetically spmi pmics
- sort alphabetically smd pmics
Changes from v1:
- add dt-bindings
- split SPMI patch into new reg types and the new PMIC
- add correct supply mapping

Iskren Chernev (13):
  dt-bindings: regulator: qcom_spmi: Improve formatting of if-then
    blocks
  dt-bindings: regulator: qcom_spmi: Document PM6125 PMIC
  dt-bindings: regulator: qcom_smd: Sort compatibles alphabetically
  dt-bindings: regulator: qcom_smd: Document PM6125 PMIC
  regulator: qcom_spmi: Add support for HFSMPS regulator type
  regulator: qcom_spmi: Add support for LDO_510 and FTSMPS
  regulator: qcom_spmi: Sort pmics alphabetically (part 1)
  regulator: qcom_spmi: Sort pmics alphabetically (part 2)
  regulator: qcom_spmi: Add PM6125 PMIC support
  regulator: qcom_smd: Sort pmics alphabetically (part 1)
  regulator: qcom_smd: Sort pmics alphabetically (part 2)
  regulator: qcom_smd: Sort pmics alphabetically (part 3)
  regulator: qcom_smd: Add PM6125 RPM regulators

 .../regulator/qcom,smd-rpm-regulator.yaml     |  26 +-
 .../regulator/qcom,spmi-regulator.yaml        |  32 ++
 drivers/regulator/qcom_smd-regulator.c        | 400 ++++++++++--------
 drivers/regulator/qcom_spmi-regulator.c       | 378 ++++++++++++-----
 4 files changed, 551 insertions(+), 285 deletions(-)

--
2.37.1

Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml

@@ -24,6 +24,17 @@ description:
 
   For mp5496, s2
 
+  For pm2250, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
+  l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22
+
+  For pm6125 s1, s2, s3, s4, s5, s6, s7, s8, l1, l2, l3, l5, l6, l7, l8, l9,
+  l10, l22, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24
+
+  For pm660, s1, s2, s3, s4, s5, s6, l1, l2, l3, l5, l6, l7, l8, l9, l10, l22,
+  l12, l13, l14, l15, l16, l17, l18, l19
+
+  For pm660l s1, s2, s3, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, bob
+
   For pm8226, s1, s2, s3, s4, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10,
   l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, l25,
   l26, l27, l28, lvs1
@@ -52,11 +63,6 @@ description:
   l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19,
   l20, l21, l22, l23, l24, l25, l26, l27, l28, lvs1, lvs2
 
-  For pm660, s1, s2, s3, s4, s5, s6, l1, l2, l3, l5, l6, l7, l8, l9, l10, l22,
-  l12, l13, l14, l15, l16, l17, l18, l19
-
-  For pm660l s1, s2, s3, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, bob
-
   For pma8084, s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3,
   l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19,
   l20, l21, l22, l23, l24, l25, l26, l27, lvs1, lvs2, lvs3, lvs4, 5vs1
@@ -68,9 +74,6 @@ description:
   For pms405, s1, s2, s3, s4, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
   l12, l13
 
-  For pm2250, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
-  l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22
-
 maintainers:
   - Andy Gross <agross@kernel.org>
   - Bjorn Andersson <bjorn.andersson@linaro.org>
@@ -79,6 +82,10 @@ properties:
   compatible:
     enum:
       - qcom,rpm-mp5496-regulators
+      - qcom,rpm-pm2250-regulators
+      - qcom,rpm-pm6125-regulators
+      - qcom,rpm-pm660-regulators
+      - qcom,rpm-pm660l-regulators
       - qcom,rpm-pm8226-regulators
       - qcom,rpm-pm8841-regulators
       - qcom,rpm-pm8909-regulators
@@ -88,13 +95,10 @@ properties:
       - qcom,rpm-pm8953-regulators
       - qcom,rpm-pm8994-regulators
       - qcom,rpm-pm8998-regulators
-      - qcom,rpm-pm660-regulators
-      - qcom,rpm-pm660l-regulators
       - qcom,rpm-pma8084-regulators
       - qcom,rpm-pmi8994-regulators
       - qcom,rpm-pmi8998-regulators
       - qcom,rpm-pms405-regulators
-      - qcom,rpm-pm2250-regulators
 
 patternProperties:
   ".*-supply$":

Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml

@@ -12,6 +12,7 @@ maintainers:
 properties:
   compatible:
     enum:
+      - qcom,pm6125-regulators
       - qcom,pm660-regulators
       - qcom,pm660l-regulators
       - qcom,pm8004-regulators
@@ -107,6 +108,25 @@ required:
   - compatible
 
 allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm6125-regulators
+    then:
+      properties:
+        vdd_l1_l7_l17_l18-supply: true
+        vdd_l2_l3_l4-supply: true
+        vdd_l5_l15_l19_l20_l21_l22-supply: true
+        vdd_l6_l8-supply: true
+        vdd_l9_l11-supply: true
+        vdd_l10_l13_l14-supply: true
+        vdd_l12_l16-supply: true
+        vdd_l23_l24-supply: true
+      patternProperties:
+        "^vdd_s[1-8]-supply$": true
+
   - if:
       properties:
         compatible:
@@ -122,6 +142,7 @@ allOf:
         vdd_l8_l9_l10_l11_l12_l13_l14-supply: true
       patternProperties:
         "^vdd_s[1-6]-supply$": true
+
   - if:
       properties:
         compatible:
@@ -136,6 +157,7 @@ allOf:
         vdd_l4_l6-supply: true
       patternProperties:
         "^vdd_s[1-5]-supply$": true
+
   - if:
       properties:
         compatible:
@@ -145,6 +167,7 @@ allOf:
     then:
       patternProperties:
         "^vdd_s[25]-supply$": true
+
   - if:
       properties:
         compatible:
@@ -154,6 +177,7 @@ allOf:
     then:
       patternProperties:
         "^vdd_s[1-4]-supply$": true
+
   - if:
       properties:
         compatible:
@@ -173,6 +197,7 @@ allOf:
         vdd_lvs1-supply: true
       patternProperties:
         "^vdd_s[1-5]-supply$": true
+
   - if:
       properties:
         compatible:
@@ -182,6 +207,7 @@ allOf:
     then:
       patternProperties:
         "^vdd_s[1-8]-supply$": true
+
   - if:
       properties:
         compatible:
@@ -197,6 +223,7 @@ allOf:
       patternProperties:
         "^vdd_l[27]-supply$": true
         "^vdd_s[1-4]-supply$": true
+
   - if:
       properties:
         compatible:
@@ -225,6 +252,7 @@ allOf:
         vin_5vs-supply: true
       patternProperties:
         "^vdd_s[1-3]-supply$": true
+
   - if:
       properties:
         compatible:
@@ -243,6 +271,7 @@ allOf:
         vdd_l9_l10_l13_l14_l15_l18-supply: true
       patternProperties:
         "^vdd_s[1-6]-supply$": true
+
   - if:
       properties:
         compatible:
@@ -267,6 +296,7 @@ allOf:
         vdd_lvs_1_2-supply: true
       patternProperties:
         "^vdd_s[1-9][0-2]?-supply$": true
+
   - if:
       properties:
         compatible:
@@ -278,6 +308,7 @@ allOf:
         vdd_l1-supply: true
       patternProperties:
         "^vdd_s[1-3]-supply$": true
+
   - if:
       properties:
         compatible:
@@ -293,6 +324,7 @@ allOf:
       patternProperties:
         "^vdd_l[479]-supply$": true
         "^vdd_s[1-5]-supply$": true
+
   - if:
       properties:
         compatible: