Skip to content

L
linux
Commit d96940d8 authored by Patrice Chotard's avatar Patrice Chotard
Browse files
Options

ARM: dts: stih407-family: Fix complain about IRQ_TYPE_NONE usage 

Since commit 83a86fbb ("irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE")
kernel is complaining about the IRQ_TYPE_NONE usage which shouldn't
be used.

Use IRQ_TYPE_LEVEL_HIGH instead.
Signed-off-by: default avatarPatrice Chotard <patrice.chotard@st.com>
parent 60cc43fc
Hide whitespace changes
Inline Side-by-side
Showing with 26 additions and 26 deletions
arch/arm/boot/dts/stih407-family.dtsi
View file @ d96940d8
......@@ -206,19 +206,19 @@ irq-syscfg@0 {
vtg_main: sti-vtg-main@8d02800 {
compatible = "st,vtg";
reg = <0x8d02800 0x200>;
interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
};
vtg_aux: sti-vtg-aux@8d00200 {
compatible = "st,vtg";
reg = <0x8d00200 0x100>;
interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>;
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
};
serial@9830000 {
compatible = "st,asc";
reg = <0x9830000 0x2c>;
interrupts = <GIC_SPI 122 IRQ_TYPE_NONE>;
interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
/* Pinctrl moved out to a per-board configuration */
......@@ -228,7 +228,7 @@ serial@9830000 {
serial@9831000 {
compatible = "st,asc";
reg = <0x9831000 0x2c>;
interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>;
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_serial1>;
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
......@@ -239,7 +239,7 @@ serial@9831000 {
serial@9832000 {
compatible = "st,asc";
reg = <0x9832000 0x2c>;
interrupts = <GIC_SPI 124 IRQ_TYPE_NONE>;
interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_serial2>;
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
......@@ -251,7 +251,7 @@ serial@9832000 {
sbc_serial0: serial@9530000 {
compatible = "st,asc";
reg = <0x9530000 0x2c>;
interrupts = <GIC_SPI 138 IRQ_TYPE_NONE>;
interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sbc_serial0>;
clocks = <&clk_sysin>;
......@@ -262,7 +262,7 @@ sbc_serial0: serial@9530000 {
serial@9531000 {
compatible = "st,asc";
reg = <0x9531000 0x2c>;
interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>;
interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sbc_serial1>;
clocks = <&clk_sysin>;
......@@ -574,7 +574,7 @@ mmc0: sdhci@9060000 {
status = "disabled";
reg = <0x09060000 0x7ff>, <0x9061008 0x20>;
reg-names = "mmc", "top-mmc-delay";
interrupts = <GIC_SPI 92 IRQ_TYPE_NONE>;
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mmcirq";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc0>;
......@@ -589,7 +589,7 @@ mmc1: sdhci@9080000 {
status = "disabled";
reg = <0x09080000 0x7ff>;
reg-names = "mmc";
interrupts = <GIC_SPI 90 IRQ_TYPE_NONE>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mmcirq";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sd1>;
......@@ -623,7 +623,7 @@ sata0: sata@9b20000 {
compatible = "st,ahci";
reg = <0x9b20000 0x1000>;
interrupts = <GIC_SPI 159 IRQ_TYPE_NONE>;
interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hostc";
phys = <&phy_port0 PHY_TYPE_SATA>;
......@@ -646,7 +646,7 @@ sata1: sata@9b28000 {
compatible = "st,ahci";
reg = <0x9b28000 0x1000>;
interrupts = <GIC_SPI 170 IRQ_TYPE_NONE>;
interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hostc";
phys = <&phy_port1 PHY_TYPE_SATA>;
......@@ -687,7 +687,7 @@ st_dwc3: dwc3@8f94000 {
dwc3: dwc3@9900000 {
compatible = "snps,dwc3";
reg = <0x09900000 0x100000>;
interrupts = <GIC_SPI 155 IRQ_TYPE_NONE>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
phy-names = "usb2-phy", "usb3-phy";
phys = <&usb2_picophy0>,
......@@ -701,7 +701,7 @@ pwm0: pwm@9810000 {
compatible = "st,sti-pwm";
#pwm-cells = <2>;
reg = <0x9810000 0x68>;
interrupts = <GIC_SPI 128 IRQ_TYPE_NONE>;
interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm0_chan0_default>;
clock-names = "pwm";
......@@ -716,7 +716,7 @@ pwm1: pwm@9510000 {
compatible = "st,sti-pwm";
#pwm-cells = <2>;
reg = <0x9510000 0x68>;
interrupts = <GIC_SPI 131 IRQ_TYPE_NONE>;
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1_chan0_default
&pinctrl_pwm1_chan1_default
......@@ -755,8 +755,8 @@ ethernet0: dwmac@9630000 {
resets = <&softreset STIH407_ETH1_SOFTRESET>;
reset-names = "stmmaceth";
interrupts = <GIC_SPI 98 IRQ_TYPE_NONE>,
<GIC_SPI 99 IRQ_TYPE_NONE>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq", "eth_wake_irq";
/* DMA Bus Mode */
......@@ -787,7 +787,7 @@ rng11: rng@8a8a000 {
mailbox0: mailbox@8f00000 {
compatible = "st,stih407-mailbox";
reg = <0x8f00000 0x1000>;
interrupts = <GIC_SPI 1 IRQ_TYPE_NONE>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <2>;
mbox-name = "a9";
status = "okay";
......@@ -857,7 +857,7 @@ fdma0: dma-controller@8e20000 {
<&clk_s_c0_flexgen CLK_EXT2F_A9>,
<&clk_s_c0_flexgen CLK_EXT2F_A9>,
<&clk_s_c0_flexgen CLK_EXT2F_A9>;
interrupts = <GIC_SPI 5 IRQ_TYPE_NONE>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
dma-channels = <16>;
#dma-cells = <3>;
};
......@@ -875,7 +875,7 @@ fdma1: dma-controller@8e40000 {
<&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
<&clk_s_c0_flexgen CLK_EXT2F_A9>;
interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
dma-channels = <16>;
#dma-cells = <3>;
......@@ -890,7 +890,7 @@ fdma2: dma-controller@8e60000 {
<0x8e77000 0x1000>,
<0x8e78000 0x8000>;
reg-names = "slimcore", "dmem", "peripherals", "imem";
interrupts = <GIC_SPI 9 IRQ_TYPE_NONE>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
dma-channels = <16>;
#dma-cells = <3>;
clocks = <&clk_s_c0_flexgen CLK_FDMA>,
......@@ -910,7 +910,7 @@ sti_uni_player0: sti-uni-player@8d80000 {
assigned-clock-parents = <0>, <&clk_s_d0_quadfs 0>;
assigned-clock-rates = <50000000>;
reg = <0x8d80000 0x158>;
interrupts = <GIC_SPI 84 IRQ_TYPE_NONE>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&fdma0 2 0 1>;
dma-names = "tx";
......@@ -926,7 +926,7 @@ sti_uni_player1: sti-uni-player@8d81000 {
assigned-clock-parents = <0>, <&clk_s_d0_quadfs 1>;
assigned-clock-rates = <50000000>;
reg = <0x8d81000 0x158>;
interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&fdma0 3 0 1>;
dma-names = "tx";
......@@ -942,7 +942,7 @@ sti_uni_player2: sti-uni-player@8d82000 {
assigned-clock-parents = <0>, <&clk_s_d0_quadfs 2>;
assigned-clock-rates = <50000000>;
reg = <0x8d82000 0x158>;
interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&fdma0 4 0 1>;
dma-names = "tx";
......@@ -958,7 +958,7 @@ sti_uni_player3: sti-uni-player@8d85000 {
assigned-clock-parents = <0>, <&clk_s_d0_quadfs 3>;
assigned-clock-rates = <50000000>;
reg = <0x8d85000 0x158>;
interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&fdma0 7 0 1>;
dma-names = "tx";
......@@ -970,7 +970,7 @@ sti_uni_reader0: sti-uni-reader@8d83000 {
#sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>;
reg = <0x8d83000 0x158>;
interrupts = <GIC_SPI 87 IRQ_TYPE_NONE>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&fdma0 5 0 1>;
dma-names = "rx";
......@@ -982,7 +982,7 @@ sti_uni_reader1: sti-uni-reader@8d84000 {
#sound-dai-cells = <0>;
st,syscfg = <&syscfg_core>;
reg = <0x8d84000 0x158>;
interrupts = <GIC_SPI 88 IRQ_TYPE_NONE>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&fdma0 6 0 1>;
dma-names = "rx";
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7