Commit d9a9a7cf authored by Tim Harvey's avatar Tim Harvey Committed by Shawn Guo

arm64: dts: imx8m{m,n}-venice-*: add missing uart-has-rtscts property to UARTs

Add the missing 'uart-has-rtscts' property to UART's that have hardware
flow control capability.
Signed-off-by: default avatarTim Harvey <tharvey@gateworks.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 0d9968d9
...@@ -221,6 +221,7 @@ &uart3 { ...@@ -221,6 +221,7 @@ &uart3 {
pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_bten>; pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_bten>;
cts-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; cts-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
rts-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; rts-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
uart-has-rtscts;
status = "okay"; status = "okay";
bluetooth { bluetooth {
......
...@@ -716,6 +716,7 @@ &uart1 { ...@@ -716,6 +716,7 @@ &uart1 {
dtr-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; dtr-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
dcd-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; dcd-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
uart-has-rtscts;
status = "okay"; status = "okay";
}; };
...@@ -731,6 +732,7 @@ &uart3 { ...@@ -731,6 +732,7 @@ &uart3 {
pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>; pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
cts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; cts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
rts-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; rts-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
uart-has-rtscts;
status = "okay"; status = "okay";
}; };
...@@ -739,6 +741,7 @@ &uart4 { ...@@ -739,6 +741,7 @@ &uart4 {
pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_uart4_gpio>; pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_uart4_gpio>;
cts-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; cts-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
rts-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; rts-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
uart-has-rtscts;
status = "okay"; status = "okay";
}; };
......
...@@ -644,6 +644,7 @@ &uart1 { ...@@ -644,6 +644,7 @@ &uart1 {
pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>; pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>;
rts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; rts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
cts-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; cts-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
uart-has-rtscts;
status = "okay"; status = "okay";
}; };
...@@ -660,6 +661,7 @@ &uart3 { ...@@ -660,6 +661,7 @@ &uart3 {
pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>; pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
uart-has-rtscts;
status = "okay"; status = "okay";
bluetooth { bluetooth {
...@@ -677,6 +679,7 @@ &uart4 { ...@@ -677,6 +679,7 @@ &uart4 {
dtr-gpios = <&gpio4 3 GPIO_ACTIVE_LOW>; dtr-gpios = <&gpio4 3 GPIO_ACTIVE_LOW>;
dsr-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>; dsr-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>;
dcd-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; dcd-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
uart-has-rtscts;
status = "okay"; status = "okay";
}; };
......
...@@ -625,6 +625,7 @@ &uart3 { ...@@ -625,6 +625,7 @@ &uart3 {
pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>; pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
uart-has-rtscts;
status = "okay"; status = "okay";
bluetooth { bluetooth {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment