staging: rtl8821ae: Fix typo in comment and printk in rtl8821ae

Fix spelling typo in comment and printk within rtl8821ae.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/rtl8821ae/base.c

@@ -39,10 +39,10 @@
 #include "pci.h"
 
 /*
- *NOTICE!!!: This file will be very big, we hsould
- *keep it clear under follwing roles:
+ *NOTICE!!!: This file will be very big, we should
+ *keep it clear under following roles:
  *
- *This file include follwing part, so, if you add new
+ *This file include following part, so, if you add new
  *functions into this file, please check which part it
  *should includes. or check if you should add new part
  *for this file:
@@ -662,7 +662,7 @@ static void _rtl_txrate_selectmode(struct ieee80211_hw *hw,
 
 	if (rtlpriv->dm.b_useramask) {
 		tcb_desc->ratr_index = ratr_index;
-		/* TODO we will differentiate adhoc and station futrue  */
+		/* TODO we will differentiate adhoc and station future  */
 		if (mac->opmode == NL80211_IFTYPE_STATION ||
 			mac->opmode == NL80211_IFTYPE_MESH_POINT) {
 			tcb_desc->mac_id = 0;
@@ -772,10 +772,10 @@ void rtl_get_tcb_desc(struct ieee80211_hw *hw,
 			tcb_desc->disable_ratefallback = 1;
 		} else {
 			/*
-			 *because hw will nerver use hw_rate
+			 *because hw will never use hw_rate
 			 *when tcb_desc->use_driver_rate = false
 			 *so we never set highest N rate here,
-			 *and N rate will all be controled by FW
+			 *and N rate will all be controlled by FW
 			 *when tcb_desc->use_driver_rate = false
 			 */
 			if (sta && (sta->ht_cap.ht_supported)) {
@@ -1671,7 +1671,7 @@ void rtl_recognize_peer(struct ieee80211_hw *hw, u8 *data, unsigned int len)
 		(memcmp(mac->bssid, ap4_2, 3) == 0) ||
 		(memcmp(mac->bssid, ap4_3, 3) == 0) ||
 		vendor == PEER_RAL) {
-		RT_TRACE(COMP_MAC80211, DBG_LOUD, ("=>ral findn\n"));
+		RT_TRACE(COMP_MAC80211, DBG_LOUD, ("=>ral find\n"));
 		vendor = PEER_RAL;
 	} else if (memcmp(mac->bssid, ap6_1, 3) == 0 ||
 		vendor == PEER_CISCO) {

drivers/staging/rtl8821ae/core.c

@@ -373,7 +373,7 @@ static int rtl_op_config(struct ieee80211_hw *hw, u32 changed)
 			/* sleep here is must, or we may recv the beacon and
 			 * cause mac80211 into wrong ps state, this will cause
 			 * power save nullfunc send fail, and further cause
-			 * pkt loss, So sleep must quickly but not immediatly
+			 * pkt loss, So sleep must quickly but not immediately
 			 * because that will cause nullfunc send by mac80211
 			 * fail, and cause pkt loss, we have tested that 5mA
 			 * is worked very well */
@@ -1200,8 +1200,8 @@ static int rtl_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 		key_type = AESCMAC_ENCRYPTION;
 		RT_TRACE(COMP_SEC, DBG_DMESG, ("alg:CMAC\n"));
 		RT_TRACE(COMP_SEC, DBG_DMESG,
-				("HW don't support CMAC encrypiton, "
-				"use software CMAC encrypiton\n"));
+				("HW don't support CMAC encryption, "
+				"use software CMAC encryption\n"));
 		err = -EOPNOTSUPP;
 		goto out_unlock;
 	default:
@@ -1235,8 +1235,8 @@ static int rtl_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 		key_type = AESCMAC_ENCRYPTION;
 		RT_TRACE(COMP_SEC, DBG_DMESG, ("alg:CMAC\n"));
 		RT_TRACE(COMP_SEC, DBG_DMESG,
-			 ("HW don't support CMAC encrypiton, "
-			  "use software CMAC encrypiton\n"));
+			 ("HW don't support CMAC encryption, "
+			  "use software CMAC encryption\n"));
 		err = -EOPNOTSUPP;
 		goto out_unlock;
 	default:
@@ -1411,7 +1411,7 @@ static void rtl_op_rfkill_poll(struct ieee80211_hw *hw)
 }
 
 /* this function is called by mac80211 to flush tx buffer
- * before switch channle or power save, or tx buffer packet
+ * before switch channel or power save, or tx buffer packet
  * maybe send after offchannel or rf sleep, this may cause
  * dis-association by AP */
 #if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,10,0))

drivers/staging/rtl8821ae/core.h

@@ -2,20 +2,20 @@
  *
  * Copyright(c) 2009-2010  Realtek Corporation.
  *
- * Tmis program is free software; you can redistribute it and/or modify it
+ * This program is free software; you can redistribute it and/or modify it
  * under the terms of version 2 of the GNU General Public License as
  * published by the Free Software Foundation.
  *
- * Tmis program is distributed in the hope that it will be useful, but WITHOUT
+ * This program is distributed in the hope that it will be useful, but WITHOUT
  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  * more details.
  *
  * You should have received a copy of the GNU General Public License along with
- * tmis program; if not, write to the Free Software Foundation, Inc.,
+ * this program; if not, write to the Free Software Foundation, Inc.,
  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
  *
- * Tme full GNU General Public License is included in this distribution in the
+ * The full GNU General Public License is included in this distribution in the
  * file called LICENSE.
  *
  * Contact Information:

drivers/staging/rtl8821ae/debug.c

@@ -2,20 +2,20 @@
  *
  * Copyright(c) 2009-2010  Realtek Corporation.
  *
- * Tmis program is free software; you can redistribute it and/or modify it
+ * This program is free software; you can redistribute it and/or modify it
  * under the terms of version 2 of the GNU General Public License as
  * published by the Free Software Foundation.
  *
- * Tmis program is distributed in the hope that it will be useful, but WITHOUT
+ * This program is distributed in the hope that it will be useful, but WITHOUT
  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  * more details.
  *
  * You should have received a copy of the GNU General Public License along with
- * tmis program; if not, write to the Free Software Foundation, Inc.,
+ * this program; if not, write to the Free Software Foundation, Inc.,
  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
  *
- * Tme full GNU General Public License is included in this distribution in the
+ * The full GNU General Public License is included in this distribution in the
  * file called LICENSE.
  *
  * Contact Information:
@@ -985,4 +985,4 @@ void rtl_proc_remove_topdir(void)
 {
 	if (proc_topdir)
 		remove_proc_entry("rtlwifi", init_net.proc_net);
-}
\ No newline at end of file
+}

drivers/staging/rtl8821ae/debug.h

@@ -2,20 +2,20 @@
  *
  * Copyright(c) 2009-2010  Realtek Corporation.
  *
- * Tmis program is free software; you can redistribute it and/or modify it
+ * This program is free software; you can redistribute it and/or modify it
  * under the terms of version 2 of the GNU General Public License as
  * published by the Free Software Foundation.
  *
- * Tmis program is distributed in the hope that it will be useful, but WITHOUT
+ * This program is distributed in the hope that it will be useful, but WITHOUT
  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  * more details.
  *
  * You should have received a copy of the GNU General Public License along with
- * tmis program; if not, write to the Free Software Foundation, Inc.,
+ * this program; if not, write to the Free Software Foundation, Inc.,
  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
  *
- * Tme full GNU General Public License is included in this distribution in the
+ * The full GNU General Public License is included in this distribution in the
  * file called LICENSE.
  *
  * Contact Information:
@@ -44,7 +44,7 @@
 #define DBG_EMERG			0
 
 /*
- *Abnormal, rare, or unexpeted cases.
+ *Abnormal, rare, or unexpected cases.
  *For example, Packet/IO Ctl canceled,
  *device suprisely unremoved and so on.
  */
@@ -54,7 +54,7 @@
  *Normal case driver developer should
  *open, we can see link status like
  *assoc/AddBA/DHCP/adapter start and
- *so on basic and useful infromations.
+ *so on basic and useful informations.
  */
 #define DBG_DMESG			3
 

drivers/staging/rtl8821ae/efuse.c

@@ -2,20 +2,20 @@
  *
  * Copyright(c) 2009-2010  Realtek Corporation.
  *
- * Tmis program is free software; you can redistribute it and/or modify it
+ * This program is free software; you can redistribute it and/or modify it
  * under the terms of version 2 of the GNU General Public License as
  * published by the Free Software Foundation.
  *
- * Tmis program is distributed in the hope that it will be useful, but WITHOUT
+ * This program is distributed in the hope that it will be useful, but WITHOUT
  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  * more details.
  *
  * You should have received a copy of the GNU General Public License along with
- * tmis program; if not, write to the Free Software Foundation, Inc.,
+ * this program; if not, write to the Free Software Foundation, Inc.,
  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
  *
- * Tme full GNU General Public License is included in this distribution in the
+ * The full GNU General Public License is included in this distribution in the
  * file called LICENSE.
  *
  * Contact Information:
@@ -1120,7 +1120,7 @@ static void efuse_power_switch(struct ieee80211_hw *hw, u8 bwrite, u8 pwrstate)
 		{
 			rtl_write_byte(rtlpriv, rtlpriv->cfg->maps[EFUSE_ACCESS], 0x69);
 
-			// 1.2V Power: From VDDON with Power Cut(0x0000h[15]), defualt valid
+			// 1.2V Power: From VDDON with Power Cut(0x0000h[15]), default valid
 			tmpV16 = rtl_read_word(rtlpriv,
 					       rtlpriv->cfg->maps[SYS_ISO_CTRL]);
 

drivers/staging/rtl8821ae/pci.c

@@ -583,7 +583,7 @@ static void _rtl_pci_tx_chk_waitq(struct ieee80211_hw *hw)
 		(rtlpriv->buddy_priv &&
 		 rtlpriv->buddy_priv->easy_concurrent_ctl.bswitch_in_process)))
 		return;
-	/* we juse use em for BE/BK/VI/VO */
+	/* we just use em for BE/BK/VI/VO */
 	for (tid = 7; tid >= 0; tid--) {
 		u8 hw_queue = ac_to_hwq[rtl_tid_to_ac(hw, tid)];
 		struct rtl8192_tx_ring *ring = &rtlpci->tx_ring[hw_queue];
@@ -672,7 +672,7 @@ static void _rtl_pci_tx_isr(struct ieee80211_hw *hw, int prio)
 		}
 
 		/* for sw LPS, just after NULL skb send out, we can
-		 * sure AP kown we are sleeped, our we should not let
+		 * sure AP known we are slept, our we should not let
 		 * rf to sleep*/
 		fc = rtl_get_fc(skb);
 		if (ieee80211_is_nullfunc(fc)) {
@@ -772,7 +772,7 @@ static int _rtl_pci_init_one_rxdesc(struct ieee80211_hw *hw,
 	return 1;
 }
 
-/* inorder to receive 8K AMSDU we have set skb to
+/* In order to receive 8K AMSDU we have set skb to
  * 9100bytes in init rx ring, but if this packet is
  * not a AMSDU, this so big packet will be sent to
  * TCP/IP directly, this cause big packet ping fail
@@ -783,7 +783,7 @@ static int _rtl_pci_init_one_rxdesc(struct ieee80211_hw *hw,
 /* but some platform will fail when alloc skb sometimes.
  * in this condition, we will send the old skb to
  * mac80211 directly, this will not cause any other
- * issues, but only be losted by TCP/IP */
+ * issues, but only be lost by TCP/IP */
 static void _rtl_pci_rx_to_mac80211(struct ieee80211_hw *hw,
 	struct sk_buff *skb, struct ieee80211_rx_status rx_status)
 {
@@ -1029,7 +1029,7 @@ static irqreturn_t _rtl_pci_interrupt(int irq, void *dev_id)
 	rtlpriv->cfg->ops->interrupt_recognized(hw, &inta, &intb);
 
 
-	/*Shared IRQ or HW disappared */
+	/*Shared IRQ or HW disappeared */
 	if (!inta || inta == 0xffff)
 		goto done;
 	/*<1> beacon related */
@@ -1936,7 +1936,7 @@ void rtl_pci_stop(struct ieee80211_hw *hw)
 	u8 RFInProgressTimeOut = 0;
 
 	/*
-	 *should before disable interrrupt&adapter
+	 *should before disable interrupt&adapter
 	 *and will do it immediately.
 	 */
 	set_hal_stop(rtlhal);
@@ -2293,7 +2293,7 @@ int __devinit rtl_pci_probe(struct pci_dev *pdev,
 	/*
 	 *init dbgp flags before all
 	 *other functions, because we will
-	 *use it in other funtions like
+	 *use it in other functions like
 	 *RT_TRACE/RT_PRINT/RTL_PRINT_DATA
 	 *you can not use these macro
 	 *before this

drivers/staging/rtl8821ae/pci.h

@@ -187,7 +187,7 @@ struct rtl8192_tx_ring {
 };
 
 struct rtl8192_rx_ring {
-	struct rtl_rx_desc *desc;/*for old trx flow, not uesd in new trx*/
+	struct rtl_rx_desc *desc;/*for old trx flow, not used in new trx*/
 	/*dma matches either 'desc' or 'buffer_desc'*/
 	dma_addr_t dma;
 	unsigned int idx;

drivers/staging/rtl8821ae/ps.c

@@ -257,7 +257,7 @@ void rtl_ips_nic_off_wq_callback(void *data)
 		 *Do not enter IPS in the following conditions:
 		 *(1) RF is already OFF or Sleep
 		 *(2) b_swrf_processing (indicates the IPS is still under going)
-		 *(3) Connectted (only disconnected can trigger IPS)
+		 *(3) Connected (only disconnected can trigger IPS)
 		 *(4) IBSS (send Beacon)
 		 *(5) AP mode (send Beacon)
 		 *(6) monitor mode (rcv packet)

drivers/staging/rtl8821ae/regd.c

@@ -243,7 +243,7 @@ static void _rtl_reg_apply_active_scan_flags(struct wiphy *wiphy,
 	}
 
 	/*
-	 *If a country IE has been recieved check its rule for this
+	 *If a country IE has been received check its rule for this
 	 *channel first before enabling active scan. The passive scan
 	 *would have been enforced by the initial processing of our
 	 *custom regulatory domain.
@@ -455,7 +455,7 @@ int rtl_regd_init(struct ieee80211_hw *hw,
 
 	if (rtlpriv->regd.country_code >= COUNTRY_CODE_MAX) {
 		RT_TRACE(COMP_REGD, DBG_DMESG,
-			 (KERN_DEBUG "rtl: EEPROM indicates invalid contry code"
+			 (KERN_DEBUG "rtl: EEPROM indicates invalid country code"
 			  "world wide 13 should be used\n"));
 
 		rtlpriv->regd.country_code = COUNTRY_CODE_WORLD_WIDE_13;

drivers/staging/rtl8821ae/wifi.h

@@ -76,7 +76,7 @@
 #define RTL_SLOT_TIME_20		20
 
 /*related with tcp/ip. */
-/*if_ehther.h*/
+/*if_ether.h*/
 #define ETH_P_PAE			0x888E	/*Port Access Entity
 						 *(IEEE 802.1X) */
 #define ETH_P_IP			0x0800	/*Internet Protocol packet */
@@ -112,7 +112,7 @@
 #define MAX_NUM_RATES			264
 
 /*for 88E use*/
-/*It must always set to 4, otherwise read efuse table secquence will be wrong.*/
+/*It must always set to 4, otherwise read efuse table sequence will be wrong.*/
 #define MAX_TX_COUNT			4
 #define	MAX_RF_PATH			4
 #define	MAX_CHNL_GROUP_24G		6
@@ -435,7 +435,7 @@ enum ht_channel_width {
 	HT_CHANNEL_WIDTH_80 = 2,
 };
 
-/* Ref: 802.11i sepc D10.0 7.3.2.25.1
+/* Ref: 802.11i spec D10.0 7.3.2.25.1
 Cipher Suites Encryption Algorithms */
 enum rt_enc_alg {
 	NO_ENCRYPTION = 0,
@@ -499,14 +499,14 @@ enum rtl_var_map {
 	RTL_IMR_BCNDMAINT3,	/*Beacon DMA Interrupt 3 */
 	RTL_IMR_BCNDMAINT2,	/*Beacon DMA Interrupt 2 */
 	RTL_IMR_BCNDMAINT1,	/*Beacon DMA Interrupt 1 */
-	RTL_IMR_BCNDOK8,	/*Beacon Queue DMA OK Interrup 8 */
-	RTL_IMR_BCNDOK7,	/*Beacon Queue DMA OK Interrup 7 */
-	RTL_IMR_BCNDOK6,	/*Beacon Queue DMA OK Interrup 6 */
-	RTL_IMR_BCNDOK5,	/*Beacon Queue DMA OK Interrup 5 */
-	RTL_IMR_BCNDOK4,	/*Beacon Queue DMA OK Interrup 4 */
-	RTL_IMR_BCNDOK3,	/*Beacon Queue DMA OK Interrup 3 */
-	RTL_IMR_BCNDOK2,	/*Beacon Queue DMA OK Interrup 2 */
-	RTL_IMR_BCNDOK1,	/*Beacon Queue DMA OK Interrup 1 */
+	RTL_IMR_BCNDOK8,	/*Beacon Queue DMA OK Interrupt 8 */
+	RTL_IMR_BCNDOK7,	/*Beacon Queue DMA OK Interrupt 7 */
+	RTL_IMR_BCNDOK6,	/*Beacon Queue DMA OK Interrupt 6 */
+	RTL_IMR_BCNDOK5,	/*Beacon Queue DMA OK Interrupt 5 */
+	RTL_IMR_BCNDOK4,	/*Beacon Queue DMA OK Interrupt 4 */
+	RTL_IMR_BCNDOK3,	/*Beacon Queue DMA OK Interrupt 3 */
+	RTL_IMR_BCNDOK2,	/*Beacon Queue DMA OK Interrupt 2 */
+	RTL_IMR_BCNDOK1,	/*Beacon Queue DMA OK Interrupt 1 */
 	RTL_IMR_TIMEOUT2,	/*Timeout interrupt 2 */
 	RTL_IMR_TIMEOUT1,	/*Timeout interrupt 1 */
 	RTL_IMR_TXFOVW,		/*Transmit FIFO Overflow */
@@ -515,10 +515,10 @@ enum rtl_var_map {
 	RTL_IMR_RXFOVW,		/*Receive FIFO Overflow */
 	RTL_IMR_RDU,		/*Receive Descriptor Unavailable */
 	RTL_IMR_ATIMEND,	/*For 92C,ATIM Window End Interrupt */
-	RTL_IMR_BDOK,		/*Beacon Queue DMA OK Interrup */
+	RTL_IMR_BDOK,		/*Beacon Queue DMA OK Interrupt */
 	RTL_IMR_HIGHDOK,	/*High Queue DMA OK Interrupt */
 	RTL_IMR_COMDOK,		/*Command Queue DMA OK Interrupt*/
-	RTL_IMR_TBDOK,		/*Transmit Beacon OK interrup */
+	RTL_IMR_TBDOK,		/*Transmit Beacon OK interrupt */
 	RTL_IMR_MGNTDOK,	/*Management Queue DMA OK Interrupt */
 	RTL_IMR_TBDER,		/*For 92C,Transmit Beacon Error Interrupt */
 	RTL_IMR_BKDOK,		/*AC_BK DMA OK Interrupt */
@@ -1256,7 +1256,7 @@ struct rtl_security {
 	bool use_defaultkey;
 	/*Encryption Algorithm for Unicast Packet */
 	enum rt_enc_alg pairwise_enc_algorithm;
-	/*Encryption Algorithm for Brocast/Multicast */
+	/*Encryption Algorithm for Broadcast/Multicast */
 	enum rt_enc_alg group_enc_algorithm;
 	/*Cam Entry Bitmap */
 	u32 hwsec_cam_bitmap;
@@ -1691,7 +1691,7 @@ struct rtl_stats {
 };
 
 struct rt_link_detect {
-	/* count for raoming */
+	/* count for roaming */
 	u32 bcn_rx_inperiod;
 	u32 roam_times;
 
@@ -2089,7 +2089,7 @@ struct rtl_priv {
 
 	/*
 	 *hal_cfg : for diff cards
-	 *intf_ops : for diff interrface usb/pcie
+	 *intf_ops : for diff interface usb/pcie
 	 */
 	struct rtl_hal_cfg *cfg;
 	struct rtl_intf_ops *intf_ops;
@@ -2107,7 +2107,7 @@ struct rtl_priv {
 	/*for bt coexist use*/
 	struct rtl_bt_coexist btcoexist;
 
-	/* seperate 92ee from other ICs,
+	/* separate 92ee from other ICs,
 	  * 92ee use new trx flow. */
 	bool use_new_trx_flow;
 	/*This must be the last item so
@@ -2385,7 +2385,7 @@ Set subfield of little-endian 4-byte value to specified value.	*/
 #define	RT_RF_PS_LEVEL_ALWAYS_ASPM	BIT(6)
 /* no matter RFOFF or SLEEP we set PS_ASPM_LEVL*/
 #define	RT_PS_LEVEL_ASPM		BIT(7)
-/*When LPS is on, disable 2R if no packet is received or transmittd.*/
+/*When LPS is on, disable 2R if no packet is received or transmitted.*/
 #define	RT_RF_LPS_DISALBE_2R		BIT(30)
 #define	RT_RF_LPS_LEVEL_ASPM		BIT(31)	/*LPS with ASPM */
 #define	RT_IN_PS_LEVEL(ppsc, _ps_flg)		\