net: lan78xx: replace bogus endpoint lookup

BugLink: https://bugs.launchpad.net/bugs/1892822

[ Upstream commit ea060b35 ]

Drop the bogus endpoint-lookup helper which could end up accepting
interfaces based on endpoints belonging to unrelated altsettings.

Note that the returned bulk pipes and interrupt endpoint descriptor
were never actually used. Instead the bulk-endpoint numbers are
hardcoded to 1 and 2 (matching the specification), while the interrupt-
endpoint descriptor was assumed to be the third descriptor created by
USB core.

Try to bring some order to this by dropping the bogus lookup helper and
adding the missing endpoint sanity checks while keeping the interrupt-
descriptor assumption for now.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Signed-off-by: Ian May <ian.may@canonical.com>
Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>

drivers/net/usb/lan78xx.c

@@ -251,10 +251,6 @@ struct lan78xx_net {
 	struct tasklet_struct	bh;
 	struct delayed_work	wq;
 
-	struct usb_host_endpoint *ep_blkin;
-	struct usb_host_endpoint *ep_blkout;
-	struct usb_host_endpoint *ep_intr;
-
 	int			msg_enable;
 
 	struct urb		*urb_intr;
@@ -2180,77 +2176,12 @@ netdev_tx_t lan78xx_start_xmit(struct sk_buff *skb, struct net_device *net)
 	return NETDEV_TX_OK;
 }
 
-int lan78xx_get_endpoints(struct lan78xx_net *dev, struct usb_interface *intf)
-{
-	int tmp;
-	struct usb_host_interface *alt = NULL;
-	struct usb_host_endpoint *in = NULL, *out = NULL;
-	struct usb_host_endpoint *status = NULL;
-
-	for (tmp = 0; tmp < intf->num_altsetting; tmp++) {
-		unsigned ep;
-
-		in = NULL;
-		out = NULL;
-		status = NULL;
-		alt = intf->altsetting + tmp;
-
-		for (ep = 0; ep < alt->desc.bNumEndpoints; ep++) {
-			struct usb_host_endpoint *e;
-			int intr = 0;
-
-			e = alt->endpoint + ep;
-			switch (e->desc.bmAttributes) {
-			case USB_ENDPOINT_XFER_INT:
-				if (!usb_endpoint_dir_in(&e->desc))
-					continue;
-				intr = 1;
-				/* FALLTHROUGH */
-			case USB_ENDPOINT_XFER_BULK:
-				break;
-			default:
-				continue;
-			}
-			if (usb_endpoint_dir_in(&e->desc)) {
-				if (!intr && !in)
-					in = e;
-				else if (intr && !status)
-					status = e;
-			} else {
-				if (!out)
-					out = e;
-			}
-		}
-		if (in && out)
-			break;
-	}
-	if (!alt || !in || !out)
-		return -EINVAL;
-
-	dev->pipe_in = usb_rcvbulkpipe(dev->udev,
-				       in->desc.bEndpointAddress &
-				       USB_ENDPOINT_NUMBER_MASK);
-	dev->pipe_out = usb_sndbulkpipe(dev->udev,
-					out->desc.bEndpointAddress &
-					USB_ENDPOINT_NUMBER_MASK);
-	dev->ep_intr = status;
-
-	return 0;
-}
-
 static int lan78xx_bind(struct lan78xx_net *dev, struct usb_interface *intf)
 {
 	struct lan78xx_priv *pdata = NULL;
 	int ret;
 	int i;
 
-	ret = lan78xx_get_endpoints(dev, intf);
-	if (ret) {
-		netdev_warn(dev->net, "lan78xx_get_endpoints failed: %d\n",
-			    ret);
-		return ret;
-	}
-
 	dev->data[0] = (unsigned long)kzalloc(sizeof(*pdata), GFP_KERNEL);
 
 	pdata = (struct lan78xx_priv *)(dev->data[0]);
@@ -2926,6 +2857,7 @@ static const struct net_device_ops lan78xx_netdev_ops = {
 static int lan78xx_probe(struct usb_interface *intf,
 			 const struct usb_device_id *id)
 {
+	struct usb_host_endpoint *ep_blkin, *ep_blkout, *ep_intr;
 	struct lan78xx_net *dev;
 	struct net_device *netdev;
 	struct usb_device *udev;
@@ -2969,32 +2901,44 @@ static int lan78xx_probe(struct usb_interface *intf,
 	netdev->watchdog_timeo = TX_TIMEOUT_JIFFIES;
 	netdev->ethtool_ops = &lan78xx_ethtool_ops;
 
-	ret = lan78xx_bind(dev, intf);
-	if (ret < 0)
-		goto out2;
-	strcpy(netdev->name, "eth%d");
-
-	if (netdev->mtu > (dev->hard_mtu - netdev->hard_header_len))
-		netdev->mtu = dev->hard_mtu - netdev->hard_header_len;
-	netif_set_gso_max_size(netdev, MAX_SINGLE_PACKET_SIZE - MAX_HEADER);
-
 	if (intf->cur_altsetting->desc.bNumEndpoints < 3) {
 		ret = -ENODEV;
-		goto out3;
+		goto out2;
 	}
 
-	dev->ep_blkin = (intf->cur_altsetting)->endpoint + 0;
-	dev->ep_blkout = (intf->cur_altsetting)->endpoint + 1;
-	dev->ep_intr = (intf->cur_altsetting)->endpoint + 2;
-
 	dev->pipe_in = usb_rcvbulkpipe(udev, BULK_IN_PIPE);
+	ep_blkin = usb_pipe_endpoint(udev, dev->pipe_in);
+	if (!ep_blkin || !usb_endpoint_is_bulk_in(&ep_blkin->desc)) {
+		ret = -ENODEV;
+		goto out2;
+	}
+
 	dev->pipe_out = usb_sndbulkpipe(udev, BULK_OUT_PIPE);
+	ep_blkout = usb_pipe_endpoint(udev, dev->pipe_out);
+	if (!ep_blkout || !usb_endpoint_is_bulk_out(&ep_blkout->desc)) {
+		ret = -ENODEV;
+		goto out2;
+	}
+
+	ep_intr = &intf->cur_altsetting->endpoint[2];
+	if (!usb_endpoint_is_int_in(&ep_intr->desc)) {
+		ret = -ENODEV;
+		goto out2;
+	}
 
 	dev->pipe_intr = usb_rcvintpipe(dev->udev,
-					dev->ep_intr->desc.bEndpointAddress &
-					USB_ENDPOINT_NUMBER_MASK);
-	period = dev->ep_intr->desc.bInterval;
+					usb_endpoint_num(&ep_intr->desc));
+
+	ret = lan78xx_bind(dev, intf);
+	if (ret < 0)
+		goto out2;
+	strcpy(netdev->name, "eth%d");
+
+	if (netdev->mtu > (dev->hard_mtu - netdev->hard_header_len))
+		netdev->mtu = dev->hard_mtu - netdev->hard_header_len;
+	netif_set_gso_max_size(netdev, MAX_SINGLE_PACKET_SIZE - MAX_HEADER);
 
+	period = ep_intr->desc.bInterval;
 	maxp = usb_maxpacket(dev->udev, dev->pipe_intr, 0);
 	buf = kmalloc(maxp, GFP_KERNEL);
 	if (buf) {