EDAC, amd64_edac: Extend scrub rate support to F15hM60h

The scrub rate control register has moved to function 2 in PCI config
space and is at a different offset on family 0x15, models 0x60 and
later. The minimum recommended scrub rate has also changed. (Refer to
D18F2x1c9_dct[1:0][DramScrub] in Fam15hM60h BKDG).

Adjust set_scrub_rate() and get_scrub_rate() functions to accommodate
this.

Tested on F15hM60h, Fam15h, models 00h-0fh and Fam10h systems.
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1443440593-2316-2-git-send-email-Aravind.Gopalakrishnan@amd.com
[ Cleanup conditionals. ]
Signed-off-by: Borislav Petkov <bp@suse.de>

drivers/edac/amd64_edac.c

@@ -173,7 +173,7 @@ static inline int amd64_read_dct_pci_cfg(struct amd64_pvt *pvt, u8 dct,
  * scan the scrub rate mapping table for a close or matching bandwidth value to
  * issue. If requested is too big, then use last maximum value found.
  */
-static int __set_scrub_rate(struct pci_dev *ctl, u32 new_bw, u32 min_rate)
+static int __set_scrub_rate(struct amd64_pvt *pvt, u32 new_bw, u32 min_rate)
 {
 	u32 scrubval;
 	int i;
@@ -201,7 +201,14 @@ static int __set_scrub_rate(struct pci_dev *ctl, u32 new_bw, u32 min_rate)
 
 	scrubval = scrubrates[i].scrubval;
 
-	pci_write_bits32(ctl, SCRCTRL, scrubval, 0x001F);
+	if (pvt->fam == 0x15 && pvt->model == 0x60) {
+		f15h_select_dct(pvt, 0);
+		pci_write_bits32(pvt->F2, F15H_M60H_SCRCTRL, scrubval, 0x001F);
+		f15h_select_dct(pvt, 1);
+		pci_write_bits32(pvt->F2, F15H_M60H_SCRCTRL, scrubval, 0x001F);
+	} else {
+		pci_write_bits32(pvt->F3, SCRCTRL, scrubval, 0x001F);
+	}
 
 	if (scrubval)
 		return scrubrates[i].bandwidth;
@@ -217,11 +224,15 @@ static int set_scrub_rate(struct mem_ctl_info *mci, u32 bw)
 	if (pvt->fam == 0xf)
 		min_scrubrate = 0x0;
 
-	/* Erratum #505 */
-	if (pvt->fam == 0x15 && pvt->model < 0x10)
-		f15h_select_dct(pvt, 0);
+	if (pvt->fam == 0x15) {
+		/* Erratum #505 */
+		if (pvt->model < 0x10)
+			f15h_select_dct(pvt, 0);
 
-	return __set_scrub_rate(pvt->F3, bw, min_scrubrate);
+		if (pvt->model == 0x60)
+			min_scrubrate = 0x6;
+	}
+	return __set_scrub_rate(pvt, bw, min_scrubrate);
 }
 
 static int get_scrub_rate(struct mem_ctl_info *mci)
@@ -230,11 +241,15 @@ static int get_scrub_rate(struct mem_ctl_info *mci)
 	u32 scrubval = 0;
 	int i, retval = -EINVAL;
 
-	/* Erratum #505 */
-	if (pvt->fam == 0x15 && pvt->model < 0x10)
-		f15h_select_dct(pvt, 0);
+	if (pvt->fam == 0x15) {
+		/* Erratum #505 */
+		if (pvt->model < 0x10)
+			f15h_select_dct(pvt, 0);
 
-	amd64_read_pci_cfg(pvt->F3, SCRCTRL, &scrubval);
+		if (pvt->model == 0x60)
+			amd64_read_pci_cfg(pvt->F2, F15H_M60H_SCRCTRL, &scrubval);
+	} else
+		amd64_read_pci_cfg(pvt->F3, SCRCTRL, &scrubval);
 
 	scrubval = scrubval & 0x001F;
 

drivers/edac/amd64_edac.h

@@ -255,6 +255,8 @@
 
 #define DCT_SEL_HI			0x114
 
+#define F15H_M60H_SCRCTRL		0x1C8
+
 /*
  * Function 3 - Misc Control
  */