Commit db2668fd authored by H. Peter Anvin's avatar H. Peter Anvin Committed by Linus Torvalds

boot documentation: clarifications

Textual clarifications (and fix an off-by-one error) based on feedback
mostly from Jeremy Fitzhardinge.
Signed-off-by: default avatarH. Peter Anvin <hpa@zytor.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent af669c97
......@@ -2,7 +2,7 @@
----------------------------
H. Peter Anvin <hpa@zytor.com>
Last update 2007-05-16
Last update 2007-05-23
On the i386 platform, the Linux kernel uses a rather complicated boot
convention. This has evolved partially due to historical aspects, as
......@@ -202,6 +202,8 @@ All general purpose boot loaders should write the fields marked
nonstandard address should fill in the fields marked (reloc); other
boot loaders can ignore those fields.
The byte order of all fields is littleendian (this is x86, after all.)
Field name: setup_secs
Type: read
Offset/size: 0x1f1/1
......@@ -280,14 +282,16 @@ Type: read
Offset/size: 0x206/2
Protocol: 2.00+
Contains the boot protocol version, e.g. 0x0204 for version 2.04.
Contains the boot protocol version, in (major << 8)+minor format,
e.g. 0x0204 for version 2.04, and 0x0a11 for a hypothetical version
10.17.
Field name: readmode_swtch
Type: modify (optional)
Offset/size: 0x208/4
Protocol: 2.00+
Boot loader hook (see separate chapter.)
Boot loader hook (see ADVANCED BOOT LOADER HOOKS below.)
Field name: start_sys
Type: read
......@@ -304,10 +308,17 @@ Protocol: 2.00+
If set to a nonzero value, contains a pointer to a NUL-terminated
human-readable kernel version number string, less 0x200. This can
be used to display the kernel version to the user. This value
should be less than (0x200*setup_sects). For example, if this value
is set to 0x1c00, the kernel version number string can be found at
offset 0x1e00 in the kernel file. This is a valid value if and only
if the "setup_sects" field contains the value 14 or higher.
should be less than (0x200*setup_sects).
For example, if this value is set to 0x1c00, the kernel version
number string can be found at offset 0x1e00 in the kernel file.
This is a valid value if and only if the "setup_sects" field
contains the value 15 or higher, as:
0x1c00 < 15*0x200 (= 0x1e00) but
0x1c00 >= 14*0x200 (= 0x1c00)
0x1c00 >> 9 = 14, so the minimum value for setup_secs is 15.
Field name: type_of_loader
Type: write (obligatory)
......@@ -377,7 +388,7 @@ Protocol: 2.00+
This field can be modified for two purposes:
1. as a boot loader hook (see separate chapter.)
1. as a boot loader hook (see ADVANCED BOOT LOADER HOOKS below.)
2. if a bootloader which does not install a hook loads a
relocatable kernel at a nonstandard address it will have to modify
......@@ -715,7 +726,7 @@ switched off, especially if the loaded kernel has the floppy driver as
a demand-loaded module!
**** ADVANCED BOOT TIME HOOKS
**** ADVANCED BOOT LOADER HOOKS
If the boot loader runs in a particularly hostile environment (such as
LOADLIN, which runs under DOS) it may be impossible to follow the
......@@ -740,4 +751,5 @@ IMPORTANT: All the hooks are required to preserve %esp, %ebp, %esi and
set them up to BOOT_DS (0x18) yourself.
After completing your hook, you should jump to the address
that was in this field before your boot loader overwrote it.
that was in this field before your boot loader overwrote it
(relocated, if appropriate.)
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment