MIPS: IRQ Stack: Unwind IRQ stack onto task stack
When the separate IRQ stack was introduced, stack unwinding only proceeded as far as the top of the IRQ stack, leading to kernel backtraces being less useful, lacking the trace of what was interrupted. Fix this by providing a means for the kernel to unwind the IRQ stack onto the interrupted task stack. The processor state is saved to the kernel task stack on interrupt. The IRQ_STACK_START macro reserves an unsigned long at the top of the IRQ stack where the interrupted task stack pointer can be saved. After the active stack is switched to the IRQ stack, save the interrupted tasks stack pointer to the reserved location. Fix the stack unwinding code to look for the frame being the top of the IRQ stack and if so get the next frame from the saved location. The existing test does not work with the separate stack since the ra is no longer pointed at ret_from_{irq,exception}. The test to stop unwinding the stack 32 bytes from the top of a stack must be modified to allow unwinding to continue up to the location of the saved task stack pointer when on the IRQ stack. The low / high marks of the stack are set depending on whether the sp is on an irq stack or not. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Cc: Masanari Iida <standby24x7@gmail.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jason A. Donenfeld <jason@zx2c4.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15788/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Showing