interconnect: qcom: icc-rpm: Separate out clock rate calulcations

In preparation for also setting per-node clock rates, separate out the
logic that computes it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230726-topic-icc_coeff-v4-2-c04b60caa467@linaro.orgSigned-off-by: Georgi Djakov <djakov@kernel.org>

drivers/interconnect/qcom/icc-rpm.c

@@ -291,6 +291,32 @@ static int qcom_icc_bw_aggregate(struct icc_node *node, u32 tag, u32 avg_bw,
 	return 0;
 }
 
+static u64 qcom_icc_calc_rate(struct qcom_icc_provider *qp, struct qcom_icc_node *qn, int ctx)
+{
+	u64 agg_avg_rate, agg_peak_rate, agg_rate;
+
+	if (qn->channels)
+		agg_avg_rate = div_u64(qn->sum_avg[ctx], qn->channels);
+	else
+		agg_avg_rate = qn->sum_avg[ctx];
+
+	if (qp->ab_coeff) {
+		agg_avg_rate = agg_avg_rate * qp->ab_coeff;
+		agg_avg_rate = div_u64(agg_avg_rate, 100);
+	}
+
+	if (qp->ib_coeff) {
+		agg_peak_rate = qn->max_peak[ctx] * 100;
+		agg_peak_rate = div_u64(qn->max_peak[ctx], qp->ib_coeff);
+	} else {
+		agg_peak_rate = qn->max_peak[ctx];
+	}
+
+	agg_rate = max_t(u64, agg_avg_rate, agg_peak_rate);
+
+	return div_u64(agg_rate, qn->buswidth);
+}
+
 /**
  * qcom_icc_bus_aggregate - calculate bus clock rates by traversing all nodes
  * @provider: generic interconnect provider
@@ -299,10 +325,9 @@ static int qcom_icc_bw_aggregate(struct icc_node *node, u32 tag, u32 avg_bw,
 static void qcom_icc_bus_aggregate(struct icc_provider *provider, u64 *agg_clk_rate)
 {
 	struct qcom_icc_provider *qp = to_qcom_provider(provider);
-	u64 agg_avg_rate, agg_peak_rate, agg_rate;
 	struct qcom_icc_node *qn;
 	struct icc_node *node;
-	int i;
+	int ctx;
 
 	/*
 	 * Iterate nodes on the provider, aggregate bandwidth requests for
@@ -310,27 +335,9 @@ static void qcom_icc_bus_aggregate(struct icc_provider *provider, u64 *agg_clk_r
 	 */
 	list_for_each_entry(node, &provider->nodes, node_list) {
 		qn = node->data;
-		for (i = 0; i < QCOM_SMD_RPM_STATE_NUM; i++) {
-			if (qn->channels)
-				agg_avg_rate = div_u64(qn->sum_avg[i], qn->channels);
-			else
-				agg_avg_rate = qn->sum_avg[i];
-
-			if (qp->ab_coeff) {
-				agg_avg_rate = agg_avg_rate * qp->ab_coeff;
-				agg_avg_rate = div_u64(agg_avg_rate, 100);
-			}
-
-			if (qp->ib_coeff) {
-				agg_peak_rate = qn->max_peak[i] * 100;
-				agg_peak_rate = div_u64(qn->max_peak[i], qp->ib_coeff);
-			} else {
-				agg_peak_rate = qn->max_peak[i];
-			}
-
-			agg_rate = max_t(u64, agg_avg_rate, agg_peak_rate);
-
-			agg_clk_rate[i] = max_t(u64, agg_clk_rate[i], agg_rate);
+		for (ctx = 0; ctx < QCOM_SMD_RPM_STATE_NUM; ctx++) {
+			agg_clk_rate[ctx] = max_t(u64, agg_clk_rate[ctx],
+						  qcom_icc_calc_rate(qp, qn, ctx));
 		}
 	}
 }