Commit dbb381b6 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'timers-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timekeeping and timer updates from Thomas Gleixner:
 "Core:

   - Consolidation of the vDSO build infrastructure to address the
     difficulties of cross-builds for ARM64 compat vDSO libraries by
     restricting the exposure of header content to the vDSO build.

     This is achieved by splitting out header content into separate
     headers. which contain only the minimaly required information which
     is necessary to build the vDSO. These new headers are included from
     the kernel headers and the vDSO specific files.

   - Enhancements to the generic vDSO library allowing more fine grained
     control over the compiled in code, further reducing architecture
     specific storage and preparing for adopting the generic library by
     PPC.

   - Cleanup and consolidation of the exit related code in posix CPU
     timers.

   - Small cleanups and enhancements here and there

  Drivers:

   - The obligatory new drivers: Ingenic JZ47xx and X1000 TCU support

   - Correct the clock rate of PIT64b global clock

   - setup_irq() cleanup

   - Preparation for PWM and suspend support for the TI DM timer

   - Expand the fttmr010 driver to support ast2600 systems

   - The usual small fixes, enhancements and cleanups all over the
     place"

* tag 'timers-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (80 commits)
  Revert "clocksource/drivers/timer-probe: Avoid creating dead devices"
  vdso: Fix clocksource.h macro detection
  um: Fix header inclusion
  arm64: vdso32: Enable Clang Compilation
  lib/vdso: Enable common headers
  arm: vdso: Enable arm to use common headers
  x86/vdso: Enable x86 to use common headers
  mips: vdso: Enable mips to use common headers
  arm64: vdso32: Include common headers in the vdso library
  arm64: vdso: Include common headers in the vdso library
  arm64: Introduce asm/vdso/processor.h
  arm64: vdso32: Code clean up
  linux/elfnote.h: Replace elf.h with UAPI equivalent
  scripts: Fix the inclusion order in modpost
  common: Introduce processor.h
  linux/ktime.h: Extract common header for vDSO
  linux/jiffies.h: Extract common header for vDSO
  linux/time64.h: Extract common header for vDSO
  linux/time32.h: Extract common header for vDSO
  linux/time.h: Extract common header for vDSO
  ...
parents 336622e9 4479730e
......@@ -11,6 +11,7 @@ Required properties:
"moxa,moxart-timer", "faraday,fttmr010"
"aspeed,ast2400-timer"
"aspeed,ast2500-timer"
"aspeed,ast2600-timer"
- reg : Should contain registers location and length
- interrupts : Should contain the three timer interrupts usually with
......
......@@ -10,6 +10,7 @@ Required properties:
* ingenic,jz4740-tcu
* ingenic,jz4725b-tcu
* ingenic,jz4770-tcu
* ingenic,x1000-tcu
followed by "simple-mfd".
- reg: Should be the offset/length value corresponding to the TCU registers
- clocks: List of phandle & clock specifiers for clocks external to the TCU.
......
......@@ -3,7 +3,6 @@ config ARM
bool
default y
select ARCH_32BIT_OFF_T
select ARCH_CLOCKSOURCE_DATA
select ARCH_HAS_BINFMT_FLAT
select ARCH_HAS_DEBUG_VIRTUAL if MMU
select ARCH_HAS_DEVMEM_IS_ALLOWED
......
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _ASM_CLOCKSOURCE_H
#define _ASM_CLOCKSOURCE_H
struct arch_clocksource_data {
bool vdso_direct; /* Usable for direct VDSO access? */
};
#include <asm/vdso/clocksource.h>
#endif
#endif /* _ASM_CLOCKSOURCE_H */
......@@ -50,25 +50,7 @@
#ifdef CONFIG_CPU_CP15
#define __ACCESS_CP15(CRn, Op1, CRm, Op2) \
"mrc", "mcr", __stringify(p15, Op1, %0, CRn, CRm, Op2), u32
#define __ACCESS_CP15_64(Op1, CRm) \
"mrrc", "mcrr", __stringify(p15, Op1, %Q0, %R0, CRm), u64
#define __read_sysreg(r, w, c, t) ({ \
t __val; \
asm volatile(r " " c : "=r" (__val)); \
__val; \
})
#define read_sysreg(...) __read_sysreg(__VA_ARGS__)
#define __write_sysreg(v, r, w, c, t) asm volatile(w " " c : : "r" ((t)(v)))
#define write_sysreg(v, ...) __write_sysreg(v, __VA_ARGS__)
#define BPIALL __ACCESS_CP15(c7, 0, c5, 6)
#define ICIALLU __ACCESS_CP15(c7, 0, c5, 0)
#define CNTVCT __ACCESS_CP15_64(1, c14)
#include <asm/vdso/cp15.h>
extern unsigned long cr_alignment; /* defined in entry-armv.S */
......
......@@ -14,6 +14,7 @@
#include <asm/ptrace.h>
#include <asm/types.h>
#include <asm/unified.h>
#include <asm/vdso/processor.h>
#ifdef __KERNEL__
#define STACK_TOP ((current->personality & ADDR_LIMIT_32BIT) ? \
......@@ -85,16 +86,6 @@ extern void release_thread(struct task_struct *);
unsigned long get_wchan(struct task_struct *p);
#if __LINUX_ARM_ARCH__ == 6 || defined(CONFIG_ARM_ERRATA_754327)
#define cpu_relax() \
do { \
smp_mb(); \
__asm__ __volatile__("nop; nop; nop; nop; nop; nop; nop; nop; nop; nop;"); \
} while (0)
#else
#define cpu_relax() barrier()
#endif
#define task_pt_regs(p) \
((struct pt_regs *)(THREAD_START_SP + task_stack_page(p)) - 1)
......
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __ASM_VDSOCLOCKSOURCE_H
#define __ASM_VDSOCLOCKSOURCE_H
#define VDSO_ARCH_CLOCKMODES \
VDSO_CLOCKMODE_ARCHTIMER
#endif /* __ASM_VDSOCLOCKSOURCE_H */
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (C) 2020 ARM Ltd.
*/
#ifndef __ASM_VDSO_CP15_H
#define __ASM_VDSO_CP15_H
#ifndef __ASSEMBLY__
#ifdef CONFIG_CPU_CP15
#include <linux/stringify.h>
#define __ACCESS_CP15(CRn, Op1, CRm, Op2) \
"mrc", "mcr", __stringify(p15, Op1, %0, CRn, CRm, Op2), u32
#define __ACCESS_CP15_64(Op1, CRm) \
"mrrc", "mcrr", __stringify(p15, Op1, %Q0, %R0, CRm), u64
#define __read_sysreg(r, w, c, t) ({ \
t __val; \
asm volatile(r " " c : "=r" (__val)); \
__val; \
})
#define read_sysreg(...) __read_sysreg(__VA_ARGS__)
#define __write_sysreg(v, r, w, c, t) asm volatile(w " " c : : "r" ((t)(v)))
#define write_sysreg(v, ...) __write_sysreg(v, __VA_ARGS__)
#define BPIALL __ACCESS_CP15(c7, 0, c5, 6)
#define ICIALLU __ACCESS_CP15(c7, 0, c5, 0)
#define CNTVCT __ACCESS_CP15_64(1, c14)
#endif /* CONFIG_CPU_CP15 */
#endif /* __ASSEMBLY__ */
#endif /* __ASM_VDSO_CP15_H */
......@@ -7,9 +7,9 @@
#ifndef __ASSEMBLY__
#include <asm/barrier.h>
#include <asm/cp15.h>
#include <asm/errno.h>
#include <asm/unistd.h>
#include <asm/vdso/cp15.h>
#include <uapi/linux/time.h>
#define VDSO_HAS_CLOCK_GETRES 1
......@@ -106,20 +106,32 @@ static __always_inline int clock_getres32_fallback(
return ret;
}
static inline bool arm_vdso_hres_capable(void)
{
return IS_ENABLED(CONFIG_ARM_ARCH_TIMER);
}
#define __arch_vdso_hres_capable arm_vdso_hres_capable
static __always_inline u64 __arch_get_hw_counter(int clock_mode)
{
#ifdef CONFIG_ARM_ARCH_TIMER
u64 cycle_now;
if (!clock_mode)
return -EINVAL;
/*
* Core checks for mode already, so this raced against a concurrent
* update. Return something. Core will do another round and then
* see the mode change and fallback to the syscall.
*/
if (clock_mode == VDSO_CLOCKMODE_NONE)
return 0;
isb();
cycle_now = read_sysreg(CNTVCT);
return cycle_now;
#else
return -EINVAL; /* use fallback */
/* Make GCC happy. This is compiled out anyway */
return 0;
#endif
}
......
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (C) 2020 ARM Ltd.
*/
#ifndef __ASM_VDSO_PROCESSOR_H
#define __ASM_VDSO_PROCESSOR_H
#ifndef __ASSEMBLY__
#if __LINUX_ARM_ARCH__ == 6 || defined(CONFIG_ARM_ERRATA_754327)
#define cpu_relax() \
do { \
smp_mb(); \
__asm__ __volatile__("nop; nop; nop; nop; nop; nop; nop; nop; nop; nop;"); \
} while (0)
#else
#define cpu_relax() barrier()
#endif
#endif /* __ASSEMBLY__ */
#endif /* __ASM_VDSO_PROCESSOR_H */
......@@ -11,18 +11,6 @@
extern struct vdso_data *vdso_data;
extern bool cntvct_ok;
static __always_inline
bool tk_is_cntvct(const struct timekeeper *tk)
{
if (!IS_ENABLED(CONFIG_ARM_ARCH_TIMER))
return false;
if (!tk->tkr_mono.clock->archdata.vdso_direct)
return false;
return true;
}
/*
* Update the vDSO data page to keep in sync with kernel timekeeping.
*/
......@@ -33,29 +21,6 @@ struct vdso_data *__arm_get_k_vdso_data(void)
}
#define __arch_get_k_vdso_data __arm_get_k_vdso_data
static __always_inline
bool __arm_update_vdso_data(void)
{
return cntvct_ok;
}
#define __arch_update_vdso_data __arm_update_vdso_data
static __always_inline
int __arm_get_clock_mode(struct timekeeper *tk)
{
u32 __tk_is_cntvct = tk_is_cntvct(tk);
return __tk_is_cntvct;
}
#define __arch_get_clock_mode __arm_get_clock_mode
static __always_inline
int __arm_use_vsyscall(struct vdso_data *vdata)
{
return vdata[CS_HRES_COARSE].clock_mode;
}
#define __arch_use_vsyscall __arm_use_vsyscall
static __always_inline
void __arm_sync_vdso_data(struct vdso_data *vdata)
{
......
......@@ -9,7 +9,6 @@ config ARM64
select ACPI_MCFG if (ACPI && PCI)
select ACPI_SPCR_TABLE if ACPI
select ACPI_PPTT if ACPI
select ARCH_CLOCKSOURCE_DATA
select ARCH_HAS_DEBUG_VIRTUAL
select ARCH_HAS_DEVMEM_IS_ALLOWED
select ARCH_HAS_DMA_PREP_COHERENT
......
......@@ -2,8 +2,6 @@
#ifndef _ASM_CLOCKSOURCE_H
#define _ASM_CLOCKSOURCE_H
struct arch_clocksource_data {
bool vdso_direct; /* Usable for direct VDSO access? */
};
#include <asm/vdso/clocksource.h>
#endif
......@@ -28,6 +28,8 @@
#include <linux/string.h>
#include <linux/thread_info.h>
#include <vdso/processor.h>
#include <asm/alternative.h>
#include <asm/cpufeature.h>
#include <asm/hw_breakpoint.h>
......@@ -256,11 +258,6 @@ extern void release_thread(struct task_struct *);
unsigned long get_wchan(struct task_struct *p);
static inline void cpu_relax(void)
{
asm volatile("yield" ::: "memory");
}
/* Thread switching */
extern struct task_struct *cpu_switch_to(struct task_struct *prev,
struct task_struct *next);
......
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __ASM_VDSOCLOCKSOURCE_H
#define __ASM_VDSOCLOCKSOURCE_H
#define VDSO_ARCH_CLOCKMODES \
VDSO_CLOCKMODE_ARCHTIMER
#endif
......@@ -8,12 +8,10 @@
#ifndef __ASSEMBLY__
#include <asm/unistd.h>
#include <uapi/linux/time.h>
#include <asm/errno.h>
#include <asm/vdso/compat_barrier.h>
#define __VDSO_USE_SYSCALL ULLONG_MAX
#define VDSO_HAS_CLOCK_GETRES 1
#define BUILD_VDSO32 1
......@@ -78,10 +76,6 @@ int clock_getres_fallback(clockid_t _clkid, struct __kernel_timespec *_ts)
register long ret asm ("r0");
register long nr asm("r7") = __NR_compat_clock_getres_time64;
/* The checks below are required for ABI consistency with arm */
if ((_clkid >= MAX_CLOCKS) && (_ts == NULL))
return -EINVAL;
asm volatile(
" swi #0\n"
: "=r" (ret)
......@@ -99,10 +93,6 @@ int clock_getres32_fallback(clockid_t _clkid, struct old_timespec32 *_ts)
register long ret asm ("r0");
register long nr asm("r7") = __NR_compat_clock_getres;
/* The checks below are required for ABI consistency with arm */
if ((_clkid >= MAX_CLOCKS) && (_ts == NULL))
return -EINVAL;
asm volatile(
" swi #0\n"
: "=r" (ret)
......@@ -117,11 +107,12 @@ static __always_inline u64 __arch_get_hw_counter(s32 clock_mode)
u64 res;
/*
* clock_mode == 0 implies that vDSO are enabled otherwise
* fallback on syscall.
* Core checks for mode already, so this raced against a concurrent
* update. Return something. Core will do another round and then
* see the mode change and fallback to the syscall.
*/
if (clock_mode)
return __VDSO_USE_SYSCALL;
if (clock_mode == VDSO_CLOCKMODE_NONE)
return 0;
/*
* This isb() is required to prevent that the counter value
......
......@@ -8,9 +8,6 @@
#ifndef __ASSEMBLY__
#include <asm/unistd.h>
#include <uapi/linux/time.h>
#define __VDSO_USE_SYSCALL ULLONG_MAX
#define VDSO_HAS_CLOCK_GETRES 1
......@@ -71,11 +68,12 @@ static __always_inline u64 __arch_get_hw_counter(s32 clock_mode)
u64 res;
/*
* clock_mode == 0 implies that vDSO are enabled otherwise
* fallback on syscall.
* Core checks for mode already, so this raced against a concurrent
* update. Return something. Core will do another round and then
* see the mode change and fallback to the syscall.
*/
if (clock_mode)
return __VDSO_USE_SYSCALL;
if (clock_mode == VDSO_CLOCKMODE_NONE)
return 0;
/*
* This isb() is required to prevent that the counter value
......
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (C) 2020 ARM Ltd.
*/
#ifndef __ASM_VDSO_PROCESSOR_H
#define __ASM_VDSO_PROCESSOR_H
#ifndef __ASSEMBLY__
static inline void cpu_relax(void)
{
asm volatile("yield" ::: "memory");
}
#endif /* __ASSEMBLY__ */
#endif /* __ASM_VDSO_PROCESSOR_H */
......@@ -21,15 +21,6 @@ struct vdso_data *__arm64_get_k_vdso_data(void)
}
#define __arch_get_k_vdso_data __arm64_get_k_vdso_data
static __always_inline
int __arm64_get_clock_mode(struct timekeeper *tk)
{
u32 use_syscall = !tk->tkr_mono.clock->archdata.vdso_direct;
return use_syscall;
}
#define __arch_get_clock_mode __arm64_get_clock_mode
static __always_inline
void __arm64_update_vsyscall(struct vdso_data *vdata, struct timekeeper *tk)
{
......
......@@ -5,8 +5,6 @@
* Copyright (C) 2018 ARM Limited
*
*/
#include <linux/time.h>
#include <linux/types.h>
int __kernel_clock_gettime(clockid_t clock,
struct __kernel_timespec *ts)
......
......@@ -10,7 +10,18 @@ include $(srctree)/lib/vdso/Makefile
# Same as cc-*option, but using CC_COMPAT instead of CC
ifeq ($(CONFIG_CC_IS_CLANG), y)
COMPAT_GCC_TOOLCHAIN_DIR := $(dir $(shell which $(CROSS_COMPILE_COMPAT)elfedit))
COMPAT_GCC_TOOLCHAIN := $(realpath $(COMPAT_GCC_TOOLCHAIN_DIR)/..)
CC_COMPAT_CLANG_FLAGS := --target=$(notdir $(CROSS_COMPILE_COMPAT:%-=%))
CC_COMPAT_CLANG_FLAGS += --prefix=$(COMPAT_GCC_TOOLCHAIN_DIR)
CC_COMPAT_CLANG_FLAGS += -no-integrated-as -Qunused-arguments
ifneq ($(COMPAT_GCC_TOOLCHAIN),)
CC_COMPAT_CLANG_FLAGS += --gcc-toolchain=$(COMPAT_GCC_TOOLCHAIN)
endif
CC_COMPAT ?= $(CC)
CC_COMPAT += $(CC_COMPAT_CLANG_FLAGS)
else
CC_COMPAT ?= $(CROSS_COMPILE_COMPAT)gcc
endif
......
......@@ -5,26 +5,16 @@
* Copyright (C) 2018 ARM Limited
*
*/
#include <linux/time.h>
#include <linux/types.h>
int __vdso_clock_gettime(clockid_t clock,
struct old_timespec32 *ts)
{
/* The checks below are required for ABI consistency with arm */
if ((u32)ts >= TASK_SIZE_32)
return -EFAULT;
return __cvdso_clock_gettime32(clock, ts);
}
int __vdso_clock_gettime64(clockid_t clock,
struct __kernel_timespec *ts)
{
/* The checks below are required for ABI consistency with arm */
if ((u32)ts >= TASK_SIZE_32)
return -EFAULT;
return __cvdso_clock_gettime(clock, ts);
}
......@@ -37,10 +27,6 @@ int __vdso_gettimeofday(struct __kernel_old_timeval *tv,
int __vdso_clock_getres(clockid_t clock_id,
struct old_timespec32 *res)
{
/* The checks below are required for ABI consistency with arm */
if ((u32)res >= TASK_SIZE_32)
return -EFAULT;
return __cvdso_clock_getres_time32(clock_id, res);
}
......
......@@ -4,7 +4,6 @@ config MIPS
default y
select ARCH_32BIT_OFF_T if !64BIT
select ARCH_BINFMT_ELF_STATE if MIPS_FP_SUPPORT
select ARCH_CLOCKSOURCE_DATA
select ARCH_HAS_FORTIFY_SOURCE
select ARCH_HAS_KCOV
select ARCH_HAS_PTE_SPECIAL if !(32BIT && CPU_HAS_RIXI)
......
......@@ -3,23 +3,9 @@
* Copyright (C) 2015 Imagination Technologies
* Author: Alex Smith <alex.smith@imgtec.com>
*/
#ifndef __ASM_CLOCKSOURCE_H
#define __ASM_CLOCKSOURCE_H
#include <linux/types.h>
/* VDSO clocksources. */
#define VDSO_CLOCK_NONE 0 /* No suitable clocksource. */
#define VDSO_CLOCK_R4K 1 /* Use the coprocessor 0 count. */
#define VDSO_CLOCK_GIC 2 /* Use the GIC. */
/**
* struct arch_clocksource_data - Architecture-specific clocksource information.
* @vdso_clock_mode: Method the VDSO should use to access the clocksource.
*/
struct arch_clocksource_data {
u8 vdso_clock_mode;
};
#include <asm/vdso/clocksource.h>
#endif /* __ASM_CLOCKSOURCE_H */
......@@ -22,6 +22,7 @@
#include <asm/dsemul.h>
#include <asm/mipsregs.h>
#include <asm/prefetch.h>
#include <asm/vdso/processor.h>
/*
* System setup and hardware flags..
......@@ -385,21 +386,6 @@ unsigned long get_wchan(struct task_struct *p);
#define KSTK_ESP(tsk) (task_pt_regs(tsk)->regs[29])
#define KSTK_STATUS(tsk) (task_pt_regs(tsk)->cp0_status)
#ifdef CONFIG_CPU_LOONGSON64
/*
* Loongson-3's SFB (Store-Fill-Buffer) may buffer writes indefinitely when a
* tight read loop is executed, because reads take priority over writes & the
* hardware (incorrectly) doesn't ensure that writes will eventually occur.
*
* Since spin loops of any kind should have a cpu_relax() in them, force an SFB
* flush from cpu_relax() such that any pending writes will become visible as
* expected.
*/
#define cpu_relax() smp_mb()
#else
#define cpu_relax() barrier()
#endif
/*
* Return_address is a replacement for __builtin_return_address(count)
* which on certain architectures cannot reasonably be implemented in GCC
......
/* SPDX-License-Identifier: GPL-2.0-or-later */
#ifndef __ASM_VDSOCLOCKSOURCE_H
#define __ASM_VDSOCLOCKSOURCE_H
#define VDSO_ARCH_CLOCKMODES \
VDSO_CLOCKMODE_R4K, \
VDSO_CLOCKMODE_GIC
#endif /* __ASM_VDSOCLOCKSOURCE_H */
......@@ -13,19 +13,13 @@
#ifndef __ASSEMBLY__
#include <linux/compiler.h>
#include <linux/time.h>
#include <asm/vdso/vdso.h>
#include <asm/clocksource.h>
#include <asm/io.h>
#include <asm/unistd.h>
#include <asm/vdso.h>
#define VDSO_HAS_CLOCK_GETRES 1
#define __VDSO_USE_SYSCALL ULLONG_MAX
static __always_inline long gettimeofday_fallback(
struct __kernel_old_timeval *_tv,
struct timezone *_tz)
......@@ -175,29 +169,28 @@ static __always_inline u64 read_gic_count(const struct vdso_data *data)
static __always_inline u64 __arch_get_hw_counter(s32 clock_mode)
{
#ifdef CONFIG_CLKSRC_MIPS_GIC
const struct vdso_data *data = get_vdso_data();
#endif
u64 cycle_now;
switch (clock_mode) {
#ifdef CONFIG_CSRC_R4K
case VDSO_CLOCK_R4K:
cycle_now = read_r4k_count();
break;
if (clock_mode == VDSO_CLOCKMODE_R4K)
return read_r4k_count();
#endif
#ifdef CONFIG_CLKSRC_MIPS_GIC
case VDSO_CLOCK_GIC:
cycle_now = read_gic_count(data);
break;
if (clock_mode == VDSO_CLOCKMODE_GIC)
return read_gic_count(get_vdso_data());
#endif
default:
cycle_now = __VDSO_USE_SYSCALL;
break;
}
/*
* Core checks mode already. So this raced against a concurrent
* update. Return something. Core will do another round see the
* change and fallback to syscall.
*/
return 0;
}
return cycle_now;
static inline bool mips_vdso_hres_capable(void)
{
return IS_ENABLED(CONFIG_CSRC_R4K) ||
IS_ENABLED(CONFIG_CLKSRC_MIPS_GIC);
}
#define __arch_vdso_hres_capable mips_vdso_hres_capable
static __always_inline const struct vdso_data *__arch_get_vdso_data(void)
{
......
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (C) 2020 ARM Ltd.
*/
#ifndef __ASM_VDSO_PROCESSOR_H
#define __ASM_VDSO_PROCESSOR_H
#ifndef __ASSEMBLY__
#ifdef CONFIG_CPU_LOONGSON64
/*
* Loongson-3's SFB (Store-Fill-Buffer) may buffer writes indefinitely when a
* tight read loop is executed, because reads take priority over writes & the
* hardware (incorrectly) doesn't ensure that writes will eventually occur.
*
* Since spin loops of any kind should have a cpu_relax() in them, force an SFB
* flush from cpu_relax() such that any pending writes will become visible as
* expected.
*/
#define cpu_relax() smp_mb()
#else
#define cpu_relax() barrier()
#endif
#endif /* __ASSEMBLY__ */
#endif /* __ASM_VDSO_PROCESSOR_H */
......@@ -19,15 +19,6 @@ struct vdso_data *__mips_get_k_vdso_data(void)
}
#define __arch_get_k_vdso_data __mips_get_k_vdso_data
static __always_inline
int __mips_get_clock_mode(struct timekeeper *tk)
{
u32 clock_mode = tk->tkr_mono.clock->archdata.vdso_clock_mode;
return clock_mode;
}
#define __arch_get_clock_mode __mips_get_clock_mode
/* The asm-generic header needs to be included after the definitions above */
#include <asm-generic/vdso/vsyscall.h>
......
......@@ -78,7 +78,7 @@ int __init init_r4k_clocksource(void)
* by the VDSO (HWREna is configured by configure_hwrena()).
*/
if (cpu_has_mips_r2_r6 && rdhwr_count_usable())
clocksource_mips.archdata.vdso_clock_mode = VDSO_CLOCK_R4K;
clocksource_mips.vdso_clock_mode = VDSO_CLOCKMODE_R4K;
clocksource_register_hz(&clocksource_mips, mips_hpt_frequency);
......
......@@ -57,7 +57,6 @@ config X86
select ACPI_LEGACY_TABLES_LOOKUP if ACPI
select ACPI_SYSTEM_POWER_STATES_SUPPORT if ACPI
select ARCH_32BIT_OFF_T if X86_32
select ARCH_CLOCKSOURCE_DATA
select ARCH_CLOCKSOURCE_INIT
select ARCH_HAS_ACPI_TABLE_UPGRADE if ACPI
select ARCH_HAS_DEBUG_VIRTUAL
......
......@@ -38,6 +38,8 @@ struct vdso_data *arch_get_vdso_data(void *vvar_page)
}
#undef EMIT_VVAR
unsigned int vclocks_used __read_mostly;
#if defined(CONFIG_X86_64)
unsigned int __read_mostly vdso64_enabled = 1;
#endif
......@@ -219,7 +221,7 @@ static vm_fault_t vvar_fault(const struct vm_special_mapping *sm,
} else if (sym_offset == image->sym_pvclock_page) {
struct pvclock_vsyscall_time_info *pvti =
pvclock_get_pvti_cpu0_va();
if (pvti && vclock_was_used(VCLOCK_PVCLOCK)) {
if (pvti && vclock_was_used(VDSO_CLOCKMODE_PVCLOCK)) {
return vmf_insert_pfn_prot(vma, vmf->address,
__pa(pvti) >> PAGE_SHIFT,
pgprot_decrypted(vma->vm_page_prot));
......@@ -227,7 +229,7 @@ static vm_fault_t vvar_fault(const struct vm_special_mapping *sm,
} else if (sym_offset == image->sym_hvclock_page) {
struct ms_hyperv_tsc_page *tsc_pg = hv_get_tsc_page();
if (tsc_pg && vclock_was_used(VCLOCK_HVCLOCK))
if (tsc_pg && vclock_was_used(VDSO_CLOCKMODE_HVCLOCK))
return vmf_insert_pfn(vma, vmf->address,
virt_to_phys(tsc_pg) >> PAGE_SHIFT);
} else if (sym_offset == image->sym_timens_page) {
......@@ -445,6 +447,8 @@ __setup("vdso=", vdso_setup);
static int __init init_vdso(void)
{
BUILD_BUG_ON(VDSO_CLOCKMODE_MAX >= 32);
init_vdso_image(&vdso_image_64);
#ifdef CONFIG_X86_X32_ABI
......
......@@ -4,14 +4,18 @@
#ifndef _ASM_X86_CLOCKSOURCE_H
#define _ASM_X86_CLOCKSOURCE_H
#define VCLOCK_NONE 0 /* No vDSO clock available. */
#define VCLOCK_TSC 1 /* vDSO should use vread_tsc. */
#define VCLOCK_PVCLOCK 2 /* vDSO should use vread_pvclock. */
#define VCLOCK_HVCLOCK 3 /* vDSO should use vread_hvclock. */
#define VCLOCK_MAX 3
#include <asm/vdso/clocksource.h>
struct arch_clocksource_data {
int vclock_mode;
};
extern unsigned int vclocks_used;
static inline bool vclock_was_used(int vclock)
{
return READ_ONCE(vclocks_used) & (1U << vclock);
}
static inline void vclocks_set_used(unsigned int which)
{
WRITE_ONCE(vclocks_used, READ_ONCE(vclocks_used) | (1 << which));
}
#endif /* _ASM_X86_CLOCKSOURCE_H */
......@@ -46,7 +46,9 @@ typedef int (*hyperv_fill_flush_list_func)(
#define hv_set_reference_tsc(val) \
wrmsrl(HV_X64_MSR_REFERENCE_TSC, val)
#define hv_set_clocksource_vdso(val) \
((val).archdata.vclock_mode = VCLOCK_HVCLOCK)
((val).vdso_clock_mode = VDSO_CLOCKMODE_HVCLOCK)
#define hv_enable_vdso_clocksource() \
vclocks_set_used(VDSO_CLOCKMODE_HVCLOCK);
#define hv_get_raw_timer() rdtsc_ordered()
void hyperv_callback_vector(void);
......
......@@ -26,6 +26,7 @@ struct vm86;
#include <asm/fpu/types.h>
#include <asm/unwind_hints.h>
#include <asm/vmxfeatures.h>
#include <asm/vdso/processor.h>
#include <linux/personality.h>
#include <linux/cache.h>
......@@ -677,17 +678,6 @@ static inline unsigned int cpuid_edx(unsigned int op)
return edx;
}
/* REP NOP (PAUSE) is a good thing to insert into busy-wait loops. */
static __always_inline void rep_nop(void)
{
asm volatile("rep; nop" ::: "memory");
}
static __always_inline void cpu_relax(void)
{
rep_nop();
}
/*
* This function forces the icache and prefetched instruction stream to
* catch up with reality in two very specific cases:
......
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __ASM_VDSO_CLOCKSOURCE_H
#define __ASM_VDSO_CLOCKSOURCE_H
#define VDSO_ARCH_CLOCKMODES \
VDSO_CLOCKMODE_TSC, \
VDSO_CLOCKMODE_PVCLOCK, \
VDSO_CLOCKMODE_HVCLOCK
#endif /* __ASM_VDSO_CLOCKSOURCE_H */
......@@ -243,7 +243,7 @@ static u64 vread_hvclock(void)
static inline u64 __arch_get_hw_counter(s32 clock_mode)
{
if (clock_mode == VCLOCK_TSC)
if (likely(clock_mode == VDSO_CLOCKMODE_TSC))
return (u64)rdtsc_ordered();
/*
* For any memory-mapped vclock type, we need to make sure that gcc
......@@ -252,13 +252,13 @@ static inline u64 __arch_get_hw_counter(s32 clock_mode)
* question isn't enabled, which will segfault. Hence the barriers.
*/
#ifdef CONFIG_PARAVIRT_CLOCK
if (clock_mode == VCLOCK_PVCLOCK) {
if (clock_mode == VDSO_CLOCKMODE_PVCLOCK) {
barrier();
return vread_pvclock();
}
#endif
#ifdef CONFIG_HYPERV_TIMER
if (clock_mode == VCLOCK_HVCLOCK) {
if (clock_mode == VDSO_CLOCKMODE_HVCLOCK) {
barrier();
return vread_hvclock();
}
......
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (C) 2020 ARM Ltd.
*/
#ifndef __ASM_VDSO_PROCESSOR_H
#define __ASM_VDSO_PROCESSOR_H
#ifndef __ASSEMBLY__
/* REP NOP (PAUSE) is a good thing to insert into busy-wait loops. */
static __always_inline void rep_nop(void)
{
asm volatile("rep; nop" ::: "memory");
}
static __always_inline void cpu_relax(void)
{
rep_nop();
}
#endif /* __ASSEMBLY__ */
#endif /* __ASM_VDSO_PROCESSOR_H */
......@@ -10,8 +10,6 @@
#include <asm/vgtod.h>
#include <asm/vvar.h>
int vclocks_used __read_mostly;
DEFINE_VVAR(struct vdso_data, _vdso_data);
/*
* Update the vDSO data page to keep in sync with kernel timekeeping.
......@@ -23,19 +21,6 @@ struct vdso_data *__x86_get_k_vdso_data(void)
}
#define __arch_get_k_vdso_data __x86_get_k_vdso_data
static __always_inline
int __x86_get_clock_mode(struct timekeeper *tk)
{
int vclock_mode = tk->tkr_mono.clock->archdata.vclock_mode;
/* Mark the new vclock used. */
BUILD_BUG_ON(VCLOCK_MAX >= 32);
WRITE_ONCE(vclocks_used, READ_ONCE(vclocks_used) | (1 << vclock_mode));
return vclock_mode;
}
#define __arch_get_clock_mode __x86_get_clock_mode
/* The asm-generic header needs to be included after the definitions above */
#include <asm-generic/vdso/vsyscall.h>
......
......@@ -2,6 +2,11 @@
#ifndef _ASM_X86_VGTOD_H
#define _ASM_X86_VGTOD_H
/*
* This check is required to prevent ARCH=um to include
* unwanted headers.
*/
#ifdef CONFIG_GENERIC_GETTIMEOFDAY
#include <linux/compiler.h>
#include <asm/clocksource.h>
#include <vdso/datapage.h>
......@@ -14,11 +19,6 @@ typedef u64 gtod_long_t;
#else
typedef unsigned long gtod_long_t;
#endif
extern int vclocks_used;
static inline bool vclock_was_used(int vclock)
{
return READ_ONCE(vclocks_used) & (1 << vclock);
}
#endif /* CONFIG_GENERIC_GETTIMEOFDAY */
#endif /* _ASM_X86_VGTOD_H */
......@@ -159,12 +159,19 @@ bool kvm_check_and_clear_guest_paused(void)
return ret;
}
static int kvm_cs_enable(struct clocksource *cs)
{
vclocks_set_used(VDSO_CLOCKMODE_PVCLOCK);
return 0;
}
struct clocksource kvm_clock = {
.name = "kvm-clock",
.read = kvm_clock_get_cycles,
.rating = 400,
.mask = CLOCKSOURCE_MASK(64),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
.enable = kvm_cs_enable,
};
EXPORT_SYMBOL_GPL(kvm_clock);
......@@ -272,7 +279,7 @@ static int __init kvm_setup_vsyscall_timeinfo(void)
if (!(flags & PVCLOCK_TSC_STABLE_BIT))
return 0;
kvm_clock.archdata.vclock_mode = VCLOCK_PVCLOCK;
kvm_clock.vdso_clock_mode = VDSO_CLOCKMODE_PVCLOCK;
#endif
kvmclock_init_mem();
......
......@@ -145,7 +145,7 @@ void pvclock_read_wallclock(struct pvclock_wall_clock *wall_clock,
void pvclock_set_pvti_cpu0_va(struct pvclock_vsyscall_time_info *pvti)
{
WARN_ON(vclock_was_used(VCLOCK_PVCLOCK));
WARN_ON(vclock_was_used(VDSO_CLOCKMODE_PVCLOCK));
pvti_cpu0_va = pvti;
}
......
......@@ -122,18 +122,12 @@ void __init time_init(void)
*/
void clocksource_arch_init(struct clocksource *cs)
{
if (cs->archdata.vclock_mode == VCLOCK_NONE)
if (cs->vdso_clock_mode == VDSO_CLOCKMODE_NONE)
return;
if (cs->archdata.vclock_mode > VCLOCK_MAX) {
pr_warn("clocksource %s registered with invalid vclock_mode %d. Disabling vclock.\n",
cs->name, cs->archdata.vclock_mode);
cs->archdata.vclock_mode = VCLOCK_NONE;
}
if (cs->mask != CLOCKSOURCE_MASK(64)) {
pr_warn("clocksource %s registered with invalid mask %016llx. Disabling vclock.\n",
pr_warn("clocksource %s registered with invalid mask %016llx for VDSO. Disabling VDSO support.\n",
cs->name, cs->mask);
cs->archdata.vclock_mode = VCLOCK_NONE;
cs->vdso_clock_mode = VDSO_CLOCKMODE_NONE;
}
}
......@@ -1108,17 +1108,24 @@ static void tsc_cs_tick_stable(struct clocksource *cs)
sched_clock_tick_stable();
}
static int tsc_cs_enable(struct clocksource *cs)
{
vclocks_set_used(VDSO_CLOCKMODE_TSC);
return 0;
}
/*
* .mask MUST be CLOCKSOURCE_MASK(64). See comment above read_tsc()
*/
static struct clocksource clocksource_tsc_early = {
.name = "tsc-early",
.rating = 299,
.read = read_tsc,
.mask = CLOCKSOURCE_MASK(64),
.flags = CLOCK_SOURCE_IS_CONTINUOUS |
.name = "tsc-early",
.rating = 299,
.read = read_tsc,
.mask = CLOCKSOURCE_MASK(64),
.flags = CLOCK_SOURCE_IS_CONTINUOUS |
CLOCK_SOURCE_MUST_VERIFY,
.archdata = { .vclock_mode = VCLOCK_TSC },
.vdso_clock_mode = VDSO_CLOCKMODE_TSC,
.enable = tsc_cs_enable,
.resume = tsc_resume,
.mark_unstable = tsc_cs_mark_unstable,
.tick_stable = tsc_cs_tick_stable,
......@@ -1131,14 +1138,15 @@ static struct clocksource clocksource_tsc_early = {
* been found good.
*/
static struct clocksource clocksource_tsc = {
.name = "tsc",
.rating = 300,
.read = read_tsc,
.mask = CLOCKSOURCE_MASK(64),
.flags = CLOCK_SOURCE_IS_CONTINUOUS |
.name = "tsc",
.rating = 300,
.read = read_tsc,
.mask = CLOCKSOURCE_MASK(64),
.flags = CLOCK_SOURCE_IS_CONTINUOUS |
CLOCK_SOURCE_VALID_FOR_HRES |
CLOCK_SOURCE_MUST_VERIFY,
.archdata = { .vclock_mode = VCLOCK_TSC },
.vdso_clock_mode = VDSO_CLOCKMODE_TSC,
.enable = tsc_cs_enable,
.resume = tsc_resume,
.mark_unstable = tsc_cs_mark_unstable,
.tick_stable = tsc_cs_tick_stable,
......
......@@ -815,8 +815,8 @@ TRACE_EVENT(kvm_write_tsc_offset,
#ifdef CONFIG_X86_64
#define host_clocks \
{VCLOCK_NONE, "none"}, \
{VCLOCK_TSC, "tsc"} \
{VDSO_CLOCKMODE_NONE, "none"}, \
{VDSO_CLOCKMODE_TSC, "tsc"} \
TRACE_EVENT(kvm_update_master_clock,
TP_PROTO(bool use_master_clock, unsigned int host_clock, bool offset_matched),
......
......@@ -1634,7 +1634,7 @@ static void update_pvclock_gtod(struct timekeeper *tk)
write_seqcount_begin(&vdata->seq);
/* copy pvclock gtod data */
vdata->clock.vclock_mode = tk->tkr_mono.clock->archdata.vclock_mode;
vdata->clock.vclock_mode = tk->tkr_mono.clock->vdso_clock_mode;
vdata->clock.cycle_last = tk->tkr_mono.cycle_last;
vdata->clock.mask = tk->tkr_mono.mask;
vdata->clock.mult = tk->tkr_mono.mult;
......@@ -1642,7 +1642,7 @@ static void update_pvclock_gtod(struct timekeeper *tk)
vdata->clock.base_cycles = tk->tkr_mono.xtime_nsec;
vdata->clock.offset = tk->tkr_mono.base;
vdata->raw_clock.vclock_mode = tk->tkr_raw.clock->archdata.vclock_mode;
vdata->raw_clock.vclock_mode = tk->tkr_raw.clock->vdso_clock_mode;
vdata->raw_clock.cycle_last = tk->tkr_raw.cycle_last;
vdata->raw_clock.mask = tk->tkr_raw.mask;
vdata->raw_clock.mult = tk->tkr_raw.mult;
......@@ -1843,7 +1843,7 @@ static u64 compute_guest_tsc(struct kvm_vcpu *vcpu, s64 kernel_ns)
static inline int gtod_is_based_on_tsc(int mode)
{
return mode == VCLOCK_TSC || mode == VCLOCK_HVCLOCK;
return mode == VDSO_CLOCKMODE_TSC || mode == VDSO_CLOCKMODE_HVCLOCK;
}
static void kvm_track_tsc_matching(struct kvm_vcpu *vcpu)
......@@ -1936,7 +1936,7 @@ static inline bool kvm_check_tsc_unstable(void)
* TSC is marked unstable when we're running on Hyper-V,
* 'TSC page' clocksource is good.
*/
if (pvclock_gtod_data.clock.vclock_mode == VCLOCK_HVCLOCK)
if (pvclock_gtod_data.clock.vclock_mode == VDSO_CLOCKMODE_HVCLOCK)
return false;
#endif
return check_tsc_unstable();
......@@ -2091,30 +2091,30 @@ static inline u64 vgettsc(struct pvclock_clock *clock, u64 *tsc_timestamp,
u64 tsc_pg_val;
switch (clock->vclock_mode) {
case VCLOCK_HVCLOCK:
case VDSO_CLOCKMODE_HVCLOCK:
tsc_pg_val = hv_read_tsc_page_tsc(hv_get_tsc_page(),
tsc_timestamp);
if (tsc_pg_val != U64_MAX) {
/* TSC page valid */
*mode = VCLOCK_HVCLOCK;
*mode = VDSO_CLOCKMODE_HVCLOCK;
v = (tsc_pg_val - clock->cycle_last) &
clock->mask;
} else {
/* TSC page invalid */
*mode = VCLOCK_NONE;
*mode = VDSO_CLOCKMODE_NONE;
}
break;
case VCLOCK_TSC:
*mode = VCLOCK_TSC;
case VDSO_CLOCKMODE_TSC:
*mode = VDSO_CLOCKMODE_TSC;
*tsc_timestamp = read_tsc();
v = (*tsc_timestamp - clock->cycle_last) &
clock->mask;
break;
default:
*mode = VCLOCK_NONE;
*mode = VDSO_CLOCKMODE_NONE;
}
if (*mode == VCLOCK_NONE)
if (*mode == VDSO_CLOCKMODE_NONE)
*tsc_timestamp = v = 0;
return v * clock->mult;
......
......@@ -145,12 +145,19 @@ static struct notifier_block xen_pvclock_gtod_notifier = {
.notifier_call = xen_pvclock_gtod_notify,
};
static int xen_cs_enable(struct clocksource *cs)
{
vclocks_set_used(VDSO_CLOCKMODE_PVCLOCK);
return 0;
}
static struct clocksource xen_clocksource __read_mostly = {
.name = "xen",
.rating = 400,
.read = xen_clocksource_get_cycles,
.mask = ~0,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
.name = "xen",
.rating = 400,
.read = xen_clocksource_get_cycles,
.mask = CLOCKSOURCE_MASK(64),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
.enable = xen_cs_enable,
};
/*
......@@ -412,12 +419,13 @@ void xen_restore_time_memory_area(void)
ret = HYPERVISOR_vcpu_op(VCPUOP_register_vcpu_time_memory_area, 0, &t);
/*
* We don't disable VCLOCK_PVCLOCK entirely if it fails to register the
* secondary time info with Xen or if we migrated to a host without the
* necessary flags. On both of these cases what happens is either
* process seeing a zeroed out pvti or seeing no PVCLOCK_TSC_STABLE_BIT
* bit set. Userspace checks the latter and if 0, it discards the data
* in pvti and fallbacks to a system call for a reliable timestamp.
* We don't disable VDSO_CLOCKMODE_PVCLOCK entirely if it fails to
* register the secondary time info with Xen or if we migrated to a
* host without the necessary flags. On both of these cases what
* happens is either process seeing a zeroed out pvti or seeing no
* PVCLOCK_TSC_STABLE_BIT bit set. Userspace checks the latter and
* if 0, it discards the data in pvti and fallbacks to a system
* call for a reliable timestamp.
*/
if (ret != 0)
pr_notice("Cannot restore secondary vcpu_time_info (err %d)",
......@@ -443,7 +451,7 @@ static void xen_setup_vsyscall_time_info(void)
ret = HYPERVISOR_vcpu_op(VCPUOP_register_vcpu_time_memory_area, 0, &t);
if (ret) {
pr_notice("xen: VCLOCK_PVCLOCK not supported (err %d)\n", ret);
pr_notice("xen: VDSO_CLOCKMODE_PVCLOCK not supported (err %d)\n", ret);
free_page((unsigned long)ti);
return;
}
......@@ -460,14 +468,14 @@ static void xen_setup_vsyscall_time_info(void)
if (!ret)
free_page((unsigned long)ti);
pr_notice("xen: VCLOCK_PVCLOCK not supported (tsc unstable)\n");
pr_notice("xen: VDSO_CLOCKMODE_PVCLOCK not supported (tsc unstable)\n");
return;
}
xen_clock = ti;
pvclock_set_pvti_cpu0_va(xen_clock);
xen_clocksource.archdata.vclock_mode = VCLOCK_PVCLOCK;
xen_clocksource.vdso_clock_mode = VDSO_CLOCKMODE_PVCLOCK;
}
static void __init xen_time_init(void)
......
......@@ -697,6 +697,14 @@ config INGENIC_TIMER
help
Support for the timer/counter unit of the Ingenic JZ SoCs.
config INGENIC_OST
bool "Clocksource for Ingenic OS Timer"
depends on MIPS || COMPILE_TEST
depends on COMMON_CLK
select MFD_SYSCON
help
Support for the Operating System Timer of the Ingenic JZ SoCs.
config MICROCHIP_PIT64B
bool "Microchip PIT64B support"
depends on OF || COMPILE_TEST
......
......@@ -80,6 +80,7 @@ obj-$(CONFIG_ASM9260_TIMER) += asm9260_timer.o
obj-$(CONFIG_H8300_TMR8) += h8300_timer8.o
obj-$(CONFIG_H8300_TMR16) += h8300_timer16.o
obj-$(CONFIG_H8300_TPU) += h8300_tpu.o
obj-$(CONFIG_INGENIC_OST) += ingenic-ost.o
obj-$(CONFIG_INGENIC_TIMER) += ingenic-timer.o
obj-$(CONFIG_CLKSRC_ST_LPC) += clksrc_st_lpc.o
obj-$(CONFIG_X86_NUMACHIP) += numachip.o
......
......@@ -69,7 +69,11 @@ static enum arch_timer_ppi_nr arch_timer_uses_ppi = ARCH_TIMER_VIRT_PPI;
static bool arch_timer_c3stop;
static bool arch_timer_mem_use_virtual;
static bool arch_counter_suspend_stop;
static bool vdso_default = true;
#ifdef CONFIG_GENERIC_GETTIMEOFDAY
static enum vdso_clock_mode vdso_default = VDSO_CLOCKMODE_ARCHTIMER;
#else
static enum vdso_clock_mode vdso_default = VDSO_CLOCKMODE_NONE;
#endif /* CONFIG_GENERIC_GETTIMEOFDAY */
static cpumask_t evtstrm_available = CPU_MASK_NONE;
static bool evtstrm_enable = IS_ENABLED(CONFIG_ARM_ARCH_TIMER_EVTSTREAM);
......@@ -560,8 +564,8 @@ void arch_timer_enable_workaround(const struct arch_timer_erratum_workaround *wa
* change both the default value and the vdso itself.
*/
if (wa->read_cntvct_el0) {
clocksource_counter.archdata.vdso_direct = false;
vdso_default = false;
clocksource_counter.vdso_clock_mode = VDSO_CLOCKMODE_NONE;
vdso_default = VDSO_CLOCKMODE_NONE;
}
}
......@@ -979,7 +983,7 @@ static void __init arch_counter_register(unsigned type)
}
arch_timer_read_counter = rd;
clocksource_counter.archdata.vdso_direct = vdso_default;
clocksource_counter.vdso_clock_mode = vdso_default;
} else {
arch_timer_read_counter = arch_counter_get_cntvct_mem;
}
......
......@@ -31,7 +31,6 @@ struct bcm2835_timer {
void __iomem *compare;
int match_mask;
struct clock_event_device evt;
struct irqaction act;
};
static void __iomem *system_clock __read_mostly;
......@@ -113,12 +112,9 @@ static int __init bcm2835_timer_init(struct device_node *node)
timer->evt.features = CLOCK_EVT_FEAT_ONESHOT;
timer->evt.set_next_event = bcm2835_time_set_next_event;
timer->evt.cpumask = cpumask_of(0);
timer->act.name = node->name;
timer->act.flags = IRQF_TIMER | IRQF_SHARED;
timer->act.dev_id = timer;
timer->act.handler = bcm2835_time_interrupt;
ret = setup_irq(irq, &timer->act);
ret = request_irq(irq, bcm2835_time_interrupt, IRQF_TIMER | IRQF_SHARED,
node->name, timer);
if (ret) {
pr_err("Can't set up timer IRQ\n");
goto err_timer_free;
......
......@@ -160,12 +160,6 @@ static irqreturn_t kona_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction kona_timer_irq = {
.name = "Kona Timer Tick",
.flags = IRQF_TIMER,
.handler = kona_timer_interrupt,
};
static int __init kona_timer_init(struct device_node *node)
{
u32 freq;
......@@ -192,7 +186,9 @@ static int __init kona_timer_init(struct device_node *node)
kona_timer_disable_and_clear(timers.tmr_regs);
kona_timer_clockevents_init();
setup_irq(timers.tmr_irq, &kona_timer_irq);
if (request_irq(timers.tmr_irq, kona_timer_interrupt, IRQF_TIMER,
"Kona Timer Tick", NULL))
pr_err("%s: request_irq() failed\n", "Kona Timer Tick");
kona_timer_set_next_event((arch_timer_rate / HZ), NULL);
return 0;
......
......@@ -270,15 +270,10 @@ dw_apb_clockevent_init(int cpu, const char *name, unsigned rating,
dw_ced->ced.rating = rating;
dw_ced->ced.name = name;
dw_ced->irqaction.name = dw_ced->ced.name;
dw_ced->irqaction.handler = dw_apb_clockevent_irq;
dw_ced->irqaction.dev_id = &dw_ced->ced;
dw_ced->irqaction.irq = irq;
dw_ced->irqaction.flags = IRQF_TIMER | IRQF_IRQPOLL |
IRQF_NOBALANCING;
dw_ced->eoi = apbt_eoi;
err = setup_irq(irq, &dw_ced->irqaction);
err = request_irq(irq, dw_apb_clockevent_irq,
IRQF_TIMER | IRQF_IRQPOLL | IRQF_NOBALANCING,
dw_ced->ced.name, &dw_ced->ced);
if (err) {
pr_err("failed to request timer irq\n");
kfree(dw_ced);
......
......@@ -329,19 +329,15 @@ static irqreturn_t exynos4_mct_comp_isr(int irq, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction mct_comp_event_irq = {
.name = "mct_comp_irq",
.flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = exynos4_mct_comp_isr,
.dev_id = &mct_comp_device,
};
static int exynos4_clockevent_init(void)
{
mct_comp_device.cpumask = cpumask_of(0);
clockevents_config_and_register(&mct_comp_device, clk_rate,
0xf, 0xffffffff);
setup_irq(mct_irqs[MCT_G0_IRQ], &mct_comp_event_irq);
if (request_irq(mct_irqs[MCT_G0_IRQ], exynos4_mct_comp_isr,
IRQF_TIMER | IRQF_IRQPOLL, "mct_comp_irq",
&mct_comp_device))
pr_err("%s: request_irq() failed\n", "mct_comp_irq");
return 0;
}
......
......@@ -370,6 +370,12 @@ static void resume_hv_clock_tsc(struct clocksource *arg)
hv_set_reference_tsc(tsc_msr);
}
static int hv_cs_enable(struct clocksource *cs)
{
hv_enable_vdso_clocksource();
return 0;
}
static struct clocksource hyperv_cs_tsc = {
.name = "hyperv_clocksource_tsc_page",
.rating = 250,
......@@ -378,6 +384,7 @@ static struct clocksource hyperv_cs_tsc = {
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
.suspend= suspend_hv_clock_tsc,
.resume = resume_hv_clock_tsc,
.enable = hv_cs_enable,
};
static u64 notrace read_hv_clock_msr(void)
......
// SPDX-License-Identifier: GPL-2.0
/*
* JZ47xx SoCs TCU Operating System Timer driver
*
* Copyright (C) 2016 Maarten ter Huurne <maarten@treewalker.org>
* Copyright (C) 2020 Paul Cercueil <paul@crapouillou.net>
*/
#include <linux/clk.h>
#include <linux/clocksource.h>
#include <linux/mfd/ingenic-tcu.h>
#include <linux/mfd/syscon.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/regmap.h>
#include <linux/sched_clock.h>
#define TCU_OST_TCSR_MASK 0xffc0
#define TCU_OST_TCSR_CNT_MD BIT(15)
#define TCU_OST_CHANNEL 15
/*
* The TCU_REG_OST_CNT{L,R} from <linux/mfd/ingenic-tcu.h> are only for the
* regmap; these are for use with the __iomem pointer.
*/
#define OST_REG_CNTL 0x4
#define OST_REG_CNTH 0x8
struct ingenic_ost_soc_info {
bool is64bit;
};
struct ingenic_ost {
void __iomem *regs;
struct clk *clk;
struct clocksource cs;
};
static struct ingenic_ost *ingenic_ost;
static u64 notrace ingenic_ost_read_cntl(void)
{
/* Read using __iomem pointer instead of regmap to avoid locking */
return readl(ingenic_ost->regs + OST_REG_CNTL);
}
static u64 notrace ingenic_ost_read_cnth(void)
{
/* Read using __iomem pointer instead of regmap to avoid locking */
return readl(ingenic_ost->regs + OST_REG_CNTH);
}
static u64 notrace ingenic_ost_clocksource_readl(struct clocksource *cs)
{
return ingenic_ost_read_cntl();
}
static u64 notrace ingenic_ost_clocksource_readh(struct clocksource *cs)
{
return ingenic_ost_read_cnth();
}
static int __init ingenic_ost_probe(struct platform_device *pdev)
{
const struct ingenic_ost_soc_info *soc_info;
struct device *dev = &pdev->dev;
struct ingenic_ost *ost;
struct clocksource *cs;
struct regmap *map;
unsigned long rate;
int err;
soc_info = device_get_match_data(dev);
if (!soc_info)
return -EINVAL;
ost = devm_kzalloc(dev, sizeof(*ost), GFP_KERNEL);
if (!ost)
return -ENOMEM;
ingenic_ost = ost;
ost->regs = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(ost->regs))
return PTR_ERR(ost->regs);
map = device_node_to_regmap(dev->parent->of_node);
if (!map) {
dev_err(dev, "regmap not found");
return -EINVAL;
}
ost->clk = devm_clk_get(dev, "ost");
if (IS_ERR(ost->clk))
return PTR_ERR(ost->clk);
err = clk_prepare_enable(ost->clk);
if (err)
return err;
/* Clear counter high/low registers */
if (soc_info->is64bit)
regmap_write(map, TCU_REG_OST_CNTL, 0);
regmap_write(map, TCU_REG_OST_CNTH, 0);
/* Don't reset counter at compare value. */
regmap_update_bits(map, TCU_REG_OST_TCSR,
TCU_OST_TCSR_MASK, TCU_OST_TCSR_CNT_MD);
rate = clk_get_rate(ost->clk);
/* Enable OST TCU channel */
regmap_write(map, TCU_REG_TESR, BIT(TCU_OST_CHANNEL));
cs = &ost->cs;
cs->name = "ingenic-ost";
cs->rating = 320;
cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;
cs->mask = CLOCKSOURCE_MASK(32);
if (soc_info->is64bit)
cs->read = ingenic_ost_clocksource_readl;
else
cs->read = ingenic_ost_clocksource_readh;
err = clocksource_register_hz(cs, rate);
if (err) {
dev_err(dev, "clocksource registration failed");
clk_disable_unprepare(ost->clk);
return err;
}
if (soc_info->is64bit)
sched_clock_register(ingenic_ost_read_cntl, 32, rate);
else
sched_clock_register(ingenic_ost_read_cnth, 32, rate);
return 0;
}
static int __maybe_unused ingenic_ost_suspend(struct device *dev)
{
struct ingenic_ost *ost = dev_get_drvdata(dev);
clk_disable(ost->clk);
return 0;
}
static int __maybe_unused ingenic_ost_resume(struct device *dev)
{
struct ingenic_ost *ost = dev_get_drvdata(dev);
return clk_enable(ost->clk);
}
static const struct dev_pm_ops __maybe_unused ingenic_ost_pm_ops = {
/* _noirq: We want the OST clock to be gated last / ungated first */
.suspend_noirq = ingenic_ost_suspend,
.resume_noirq = ingenic_ost_resume,
};
static const struct ingenic_ost_soc_info jz4725b_ost_soc_info = {
.is64bit = false,
};
static const struct ingenic_ost_soc_info jz4770_ost_soc_info = {
.is64bit = true,
};
static const struct of_device_id ingenic_ost_of_match[] = {
{ .compatible = "ingenic,jz4725b-ost", .data = &jz4725b_ost_soc_info, },
{ .compatible = "ingenic,jz4770-ost", .data = &jz4770_ost_soc_info, },
{ }
};
static struct platform_driver ingenic_ost_driver = {
.driver = {
.name = "ingenic-ost",
#ifdef CONFIG_PM_SUSPEND
.pm = &ingenic_ost_pm_ops,
#endif
.of_match_table = ingenic_ost_of_match,
},
};
builtin_platform_driver_probe(ingenic_ost_driver, ingenic_ost_probe);
......@@ -230,6 +230,7 @@ static const struct of_device_id ingenic_tcu_of_match[] = {
{ .compatible = "ingenic,jz4740-tcu", .data = &jz4740_soc_info, },
{ .compatible = "ingenic,jz4725b-tcu", .data = &jz4725b_soc_info, },
{ .compatible = "ingenic,jz4770-tcu", .data = &jz4740_soc_info, },
{ .compatible = "ingenic,x1000-tcu", .data = &jz4740_soc_info, },
{ /* sentinel */ }
};
......@@ -302,7 +303,7 @@ static int __init ingenic_tcu_init(struct device_node *np)
TIMER_OF_DECLARE(jz4740_tcu_intc, "ingenic,jz4740-tcu", ingenic_tcu_init);
TIMER_OF_DECLARE(jz4725b_tcu_intc, "ingenic,jz4725b-tcu", ingenic_tcu_init);
TIMER_OF_DECLARE(jz4770_tcu_intc, "ingenic,jz4770-tcu", ingenic_tcu_init);
TIMER_OF_DECLARE(x1000_tcu_intc, "ingenic,x1000-tcu", ingenic_tcu_init);
static int __init ingenic_tcu_probe(struct platform_device *pdev)
{
......
......@@ -155,10 +155,10 @@ static u64 gic_hpt_read(struct clocksource *cs)
}
static struct clocksource gic_clocksource = {
.name = "GIC",
.read = gic_hpt_read,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
.archdata = { .vdso_clock_mode = VDSO_CLOCK_GIC },
.name = "GIC",
.read = gic_hpt_read,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
.vdso_clock_mode = VDSO_CLOCKMODE_GIC,
};
static int __init __gic_clocksource_init(void)
......
......@@ -117,13 +117,6 @@ static irqreturn_t mxs_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction mxs_timer_irq = {
.name = "MXS Timer Tick",
.dev_id = &mxs_clockevent_device,
.flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = mxs_timer_interrupt,
};
static void mxs_irq_clear(char *state)
{
/* Disable interrupt in timer module */
......@@ -277,6 +270,7 @@ static int __init mxs_timer_init(struct device_node *np)
if (irq <= 0)
return -EINVAL;
return setup_irq(irq, &mxs_timer_irq);
return request_irq(irq, mxs_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
"MXS Timer Tick", &mxs_clockevent_device);
}
TIMER_OF_DECLARE(mxs, "fsl,timrot", mxs_timer_init);
......@@ -181,13 +181,6 @@ static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction nmdk_timer_irq = {
.name = "Nomadik Timer Tick",
.flags = IRQF_TIMER,
.handler = nmdk_timer_interrupt,
.dev_id = &nmdk_clkevt,
};
static int __init nmdk_timer_init(void __iomem *base, int irq,
struct clk *pclk, struct clk *clk)
{
......@@ -232,7 +225,9 @@ static int __init nmdk_timer_init(void __iomem *base, int irq,
sched_clock_register(nomadik_read_sched_clock, 32, rate);
/* Timer 1 is used for events, register irq and clockevents */
setup_irq(irq, &nmdk_timer_irq);
if (request_irq(irq, nmdk_timer_interrupt, IRQF_TIMER,
"Nomadik Timer Tick", &nmdk_clkevt))
pr_err("%s: request_irq() failed\n", "Nomadik Timer Tick");
nmdk_clkevt.cpumask = cpumask_of(0);
nmdk_clkevt.irq = irq;
clockevents_config_and_register(&nmdk_clkevt, rate, 2, 0xffffffffU);
......
......@@ -256,13 +256,6 @@ static irqreturn_t samsung_clock_event_isr(int irq, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction samsung_clock_event_irq = {
.name = "samsung_time_irq",
.flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = samsung_clock_event_isr,
.dev_id = &time_event_device,
};
static void __init samsung_clockevent_init(void)
{
unsigned long pclk;
......@@ -282,7 +275,10 @@ static void __init samsung_clockevent_init(void)
clock_rate, 1, pwm.tcnt_max);
irq_number = pwm.irq[pwm.event_id];
setup_irq(irq_number, &samsung_clock_event_irq);
if (request_irq(irq_number, samsung_clock_event_isr,
IRQF_TIMER | IRQF_IRQPOLL, "samsung_time_irq",
&time_event_device))
pr_err("%s: request_irq() failed\n", "samsung_time_irq");
if (pwm.variant.has_tint_cstat) {
u32 mask = (1 << pwm.event_id);
......
......@@ -159,29 +159,23 @@ static struct clocksource sirfsoc_clocksource = {
.resume = sirfsoc_clocksource_resume,
};
static struct irqaction sirfsoc_timer_irq = {
.name = "sirfsoc_timer0",
.flags = IRQF_TIMER | IRQF_NOBALANCING,
.handler = sirfsoc_timer_interrupt,
};
static struct irqaction sirfsoc_timer1_irq = {
.name = "sirfsoc_timer1",
.flags = IRQF_TIMER | IRQF_NOBALANCING,
.handler = sirfsoc_timer_interrupt,
};
static unsigned int sirfsoc_timer_irq, sirfsoc_timer1_irq;
static int sirfsoc_local_timer_starting_cpu(unsigned int cpu)
{
struct clock_event_device *ce = per_cpu_ptr(sirfsoc_clockevent, cpu);
struct irqaction *action;
if (cpu == 0)
action = &sirfsoc_timer_irq;
else
action = &sirfsoc_timer1_irq;
unsigned int irq;
const char *name;
if (cpu == 0) {
irq = sirfsoc_timer_irq;
name = "sirfsoc_timer0";
} else {
irq = sirfsoc_timer1_irq;
name = "sirfsoc_timer1";
}
ce->irq = action->irq;
ce->irq = irq;
ce->name = "local_timer";
ce->features = CLOCK_EVT_FEAT_ONESHOT;
ce->rating = 200;
......@@ -196,9 +190,9 @@ static int sirfsoc_local_timer_starting_cpu(unsigned int cpu)
ce->min_delta_ticks = 2;
ce->cpumask = cpumask_of(cpu);
action->dev_id = ce;
BUG_ON(setup_irq(ce->irq, action));
irq_force_affinity(action->irq, cpumask_of(cpu));
BUG_ON(request_irq(ce->irq, sirfsoc_timer_interrupt,
IRQF_TIMER | IRQF_NOBALANCING, name, ce));
irq_force_affinity(ce->irq, cpumask_of(cpu));
clockevents_register_device(ce);
return 0;
......@@ -206,12 +200,14 @@ static int sirfsoc_local_timer_starting_cpu(unsigned int cpu)
static int sirfsoc_local_timer_dying_cpu(unsigned int cpu)
{
struct clock_event_device *ce = per_cpu_ptr(sirfsoc_clockevent, cpu);
sirfsoc_timer_count_disable(1);
if (cpu == 0)
remove_irq(sirfsoc_timer_irq.irq, &sirfsoc_timer_irq);
free_irq(sirfsoc_timer_irq, ce);
else
remove_irq(sirfsoc_timer1_irq.irq, &sirfsoc_timer1_irq);
free_irq(sirfsoc_timer1_irq, ce);
return 0;
}
......@@ -268,14 +264,14 @@ static int __init sirfsoc_of_timer_init(struct device_node *np)
return -ENXIO;
}
sirfsoc_timer_irq.irq = irq_of_parse_and_map(np, 0);
if (!sirfsoc_timer_irq.irq) {
sirfsoc_timer_irq = irq_of_parse_and_map(np, 0);
if (!sirfsoc_timer_irq) {
pr_err("No irq passed for timer0 via DT\n");
return -EINVAL;
}
sirfsoc_timer1_irq.irq = irq_of_parse_and_map(np, 1);
if (!sirfsoc_timer1_irq.irq) {
sirfsoc_timer1_irq = irq_of_parse_and_map(np, 1);
if (!sirfsoc_timer1_irq) {
pr_err("No irq passed for timer1 via DT\n");
return -EINVAL;
}
......
......@@ -131,14 +131,9 @@ static irqreturn_t mfgpt_tick(int irq, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction mfgptirq = {
.handler = mfgpt_tick,
.flags = IRQF_NOBALANCING | IRQF_TIMER | IRQF_SHARED,
.name = DRV_NAME,
};
static int __init cs5535_mfgpt_init(void)
{
unsigned long flags = IRQF_NOBALANCING | IRQF_TIMER | IRQF_SHARED;
struct cs5535_mfgpt_timer *timer;
int ret;
uint16_t val;
......@@ -158,7 +153,7 @@ static int __init cs5535_mfgpt_init(void)
}
/* And register it with the kernel */
ret = setup_irq(timer_irq, &mfgptirq);
ret = request_irq(timer_irq, mfgpt_tick, flags, DRV_NAME, timer);
if (ret) {
printk(KERN_ERR DRV_NAME ": Unable to set up the interrupt.\n");
goto err_irq;
......
......@@ -119,13 +119,6 @@ static struct efm32_clock_event_ddata clock_event_ddata = {
},
};
static struct irqaction efm32_clock_event_irq = {
.name = "efm32 clockevent",
.flags = IRQF_TIMER,
.handler = efm32_clock_event_handler,
.dev_id = &clock_event_ddata,
};
static int __init efm32_clocksource_init(struct device_node *np)
{
struct clk *clk;
......@@ -230,7 +223,8 @@ static int __init efm32_clockevent_init(struct device_node *np)
DIV_ROUND_CLOSEST(rate, 1024),
0xf, 0xffff);
ret = setup_irq(irq, &efm32_clock_event_irq);
ret = request_irq(irq, efm32_clock_event_handler, IRQF_TIMER,
"efm32 clockevent", &clock_event_ddata);
if (ret) {
pr_err("Failed setup irq\n");
goto err_setup_irq;
......
......@@ -176,13 +176,6 @@ static struct clock_event_device ftm_clockevent = {
.rating = 300,
};
static struct irqaction ftm_timer_irq = {
.name = "Freescale ftm timer",
.flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = ftm_evt_interrupt,
.dev_id = &ftm_clockevent,
};
static int __init ftm_clockevent_init(unsigned long freq, int irq)
{
int err;
......@@ -192,7 +185,8 @@ static int __init ftm_clockevent_init(unsigned long freq, int irq)
ftm_reset_counter(priv->clkevt_base);
err = setup_irq(irq, &ftm_timer_irq);
err = request_irq(irq, ftm_evt_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
"Freescale ftm timer", &ftm_clockevent);
if (err) {
pr_err("ftm: setup irq failed: %d\n", err);
return err;
......
......@@ -37,6 +37,11 @@
#define TIMER3_MATCH2 (0x2c)
#define TIMER_CR (0x30)
/*
* Control register set to clear for ast2600 only.
*/
#define AST2600_TIMER_CR_CLR (0x3c)
/*
* Control register (TMC30) bit fields for fttmr010/gemini/moxart timers.
*/
......@@ -97,6 +102,7 @@ struct fttmr010 {
bool is_aspeed;
u32 t1_enable_val;
struct clock_event_device clkevt;
int (*timer_shutdown)(struct clock_event_device *evt);
#ifdef CONFIG_ARM
struct delay_timer delay_timer;
#endif
......@@ -140,9 +146,7 @@ static int fttmr010_timer_set_next_event(unsigned long cycles,
u32 cr;
/* Stop */
cr = readl(fttmr010->base + TIMER_CR);
cr &= ~fttmr010->t1_enable_val;
writel(cr, fttmr010->base + TIMER_CR);
fttmr010->timer_shutdown(evt);
if (fttmr010->is_aspeed) {
/*
......@@ -164,6 +168,16 @@ static int fttmr010_timer_set_next_event(unsigned long cycles,
return 0;
}
static int ast2600_timer_shutdown(struct clock_event_device *evt)
{
struct fttmr010 *fttmr010 = to_fttmr010(evt);
/* Stop */
writel(fttmr010->t1_enable_val, fttmr010->base + AST2600_TIMER_CR_CLR);
return 0;
}
static int fttmr010_timer_shutdown(struct clock_event_device *evt)
{
struct fttmr010 *fttmr010 = to_fttmr010(evt);
......@@ -183,9 +197,7 @@ static int fttmr010_timer_set_oneshot(struct clock_event_device *evt)
u32 cr;
/* Stop */
cr = readl(fttmr010->base + TIMER_CR);
cr &= ~fttmr010->t1_enable_val;
writel(cr, fttmr010->base + TIMER_CR);
fttmr010->timer_shutdown(evt);
/* Setup counter start from 0 or ~0 */
writel(0, fttmr010->base + TIMER1_COUNT);
......@@ -211,9 +223,7 @@ static int fttmr010_timer_set_periodic(struct clock_event_device *evt)
u32 cr;
/* Stop */
cr = readl(fttmr010->base + TIMER_CR);
cr &= ~fttmr010->t1_enable_val;
writel(cr, fttmr010->base + TIMER_CR);
fttmr010->timer_shutdown(evt);
/* Setup timer to fire at 1/HZ intervals. */
if (fttmr010->is_aspeed) {
......@@ -249,7 +259,21 @@ static irqreturn_t fttmr010_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
static int __init fttmr010_common_init(struct device_node *np, bool is_aspeed)
static irqreturn_t ast2600_timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *evt = dev_id;
struct fttmr010 *fttmr010 = to_fttmr010(evt);
writel(0x1, fttmr010->base + TIMER_INTR_STATE);
evt->event_handler(evt);
return IRQ_HANDLED;
}
static int __init fttmr010_common_init(struct device_node *np,
bool is_aspeed,
int (*timer_shutdown)(struct clock_event_device *),
irq_handler_t irq_handler)
{
struct fttmr010 *fttmr010;
int irq;
......@@ -350,6 +374,8 @@ static int __init fttmr010_common_init(struct device_node *np, bool is_aspeed)
fttmr010->tick_rate);
}
fttmr010->timer_shutdown = timer_shutdown;
/*
* Setup clockevent timer (interrupt-driven) on timer 1.
*/
......@@ -357,7 +383,7 @@ static int __init fttmr010_common_init(struct device_node *np, bool is_aspeed)
writel(0, fttmr010->base + TIMER1_LOAD);
writel(0, fttmr010->base + TIMER1_MATCH1);
writel(0, fttmr010->base + TIMER1_MATCH2);
ret = request_irq(irq, fttmr010_timer_interrupt, IRQF_TIMER,
ret = request_irq(irq, irq_handler, IRQF_TIMER,
"FTTMR010-TIMER1", &fttmr010->clkevt);
if (ret) {
pr_err("FTTMR010-TIMER1 no IRQ\n");
......@@ -370,10 +396,10 @@ static int __init fttmr010_common_init(struct device_node *np, bool is_aspeed)
fttmr010->clkevt.features = CLOCK_EVT_FEAT_PERIODIC |
CLOCK_EVT_FEAT_ONESHOT;
fttmr010->clkevt.set_next_event = fttmr010_timer_set_next_event;
fttmr010->clkevt.set_state_shutdown = fttmr010_timer_shutdown;
fttmr010->clkevt.set_state_shutdown = fttmr010->timer_shutdown;
fttmr010->clkevt.set_state_periodic = fttmr010_timer_set_periodic;
fttmr010->clkevt.set_state_oneshot = fttmr010_timer_set_oneshot;
fttmr010->clkevt.tick_resume = fttmr010_timer_shutdown;
fttmr010->clkevt.tick_resume = fttmr010->timer_shutdown;
fttmr010->clkevt.cpumask = cpumask_of(0);
fttmr010->clkevt.irq = irq;
clockevents_config_and_register(&fttmr010->clkevt,
......@@ -404,14 +430,25 @@ static int __init fttmr010_common_init(struct device_node *np, bool is_aspeed)
return ret;
}
static __init int ast2600_timer_init(struct device_node *np)
{
return fttmr010_common_init(np, true,
ast2600_timer_shutdown,
ast2600_timer_interrupt);
}
static __init int aspeed_timer_init(struct device_node *np)
{
return fttmr010_common_init(np, true);
return fttmr010_common_init(np, true,
fttmr010_timer_shutdown,
fttmr010_timer_interrupt);
}
static __init int fttmr010_timer_init(struct device_node *np)
{
return fttmr010_common_init(np, false);
return fttmr010_common_init(np, false,
fttmr010_timer_shutdown,
fttmr010_timer_interrupt);
}
TIMER_OF_DECLARE(fttmr010, "faraday,fttmr010", fttmr010_timer_init);
......@@ -419,3 +456,4 @@ TIMER_OF_DECLARE(gemini, "cortina,gemini-timer", fttmr010_timer_init);
TIMER_OF_DECLARE(moxart, "moxa,moxart-timer", fttmr010_timer_init);
TIMER_OF_DECLARE(ast2400, "aspeed,ast2400-timer", aspeed_timer_init);
TIMER_OF_DECLARE(ast2500, "aspeed,ast2500-timer", aspeed_timer_init);
TIMER_OF_DECLARE(ast2600, "aspeed,ast2600-timer", ast2600_timer_init);
......@@ -67,7 +67,6 @@ struct imx_timer {
struct clk *clk_ipg;
const struct imx_gpt_data *gpt;
struct clock_event_device ced;
struct irqaction act;
};
struct imx_gpt_data {
......@@ -273,7 +272,6 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
static int __init mxc_clockevent_init(struct imx_timer *imxtm)
{
struct clock_event_device *ced = &imxtm->ced;
struct irqaction *act = &imxtm->act;
ced->name = "mxc_timer1";
ced->features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_DYNIRQ;
......@@ -287,12 +285,8 @@ static int __init mxc_clockevent_init(struct imx_timer *imxtm)
clockevents_config_and_register(ced, clk_get_rate(imxtm->clk_per),
0xff, 0xfffffffe);
act->name = "i.MX Timer Tick";
act->flags = IRQF_TIMER | IRQF_IRQPOLL;
act->handler = mxc_timer_interrupt;
act->dev_id = ced;
return setup_irq(imxtm->irq, act);
return request_irq(imxtm->irq, mxc_timer_interrupt,
IRQF_TIMER | IRQF_IRQPOLL, "i.MX Timer Tick", ced);
}
static void imx1_gpt_setup_tctl(struct imx_timer *imxtm)
......
......@@ -4,8 +4,6 @@
#include <linux/interrupt.h>
#include <linux/clockchips.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include "timer-of.h"
......
......@@ -8,8 +8,6 @@
#include <linux/clocksource.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/sched_clock.h>
#include "timer-of.h"
......
......@@ -123,13 +123,6 @@ static struct clock_event_device integrator_clockevent = {
.rating = 300,
};
static struct irqaction integrator_timer_irq = {
.name = "timer",
.flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = integrator_timer_interrupt,
.dev_id = &integrator_clockevent,
};
static int integrator_clockevent_init(unsigned long inrate,
void __iomem *base, int irq)
{
......@@ -149,7 +142,9 @@ static int integrator_clockevent_init(unsigned long inrate,
timer_reload = rate / HZ;
writel(ctrl, clkevt_base + TIMER_CTRL);
ret = setup_irq(irq, &integrator_timer_irq);
ret = request_irq(irq, integrator_timer_interrupt,
IRQF_TIMER | IRQF_IRQPOLL, "timer",
&integrator_clockevent);
if (ret)
return ret;
......
......@@ -150,13 +150,6 @@ static irqreturn_t meson6_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction meson6_timer_irq = {
.name = "meson6_timer",
.flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = meson6_timer_interrupt,
.dev_id = &meson6_clockevent,
};
static int __init meson6_timer_init(struct device_node *node)
{
u32 val;
......@@ -194,7 +187,9 @@ static int __init meson6_timer_init(struct device_node *node)
/* Stop the timer A */
meson6_clkevt_time_stop();
ret = setup_irq(irq, &meson6_timer_irq);
ret = request_irq(irq, meson6_timer_interrupt,
IRQF_TIMER | IRQF_IRQPOLL, "meson6_timer",
&meson6_clockevent);
if (ret) {
pr_warn("failed to setup irq %d\n", irq);
return ret;
......
......@@ -264,6 +264,7 @@ static int __init mchp_pit64b_init_mode(struct mchp_pit64b_timer *timer,
if (!best_diff) {
timer->mode |= MCHP_PIT64B_MR_SGCLK;
clk_set_rate(timer->gclk, gclk_round);
goto done;
}
......
......@@ -114,12 +114,6 @@ static irqreturn_t orion_clkevt_irq_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction orion_clkevt_irq = {
.name = "orion_event",
.flags = IRQF_TIMER,
.handler = orion_clkevt_irq_handler,
};
static int __init orion_timer_init(struct device_node *np)
{
unsigned long rate;
......@@ -172,7 +166,8 @@ static int __init orion_timer_init(struct device_node *np)
sched_clock_register(orion_read_sched_clock, 32, rate);
/* setup timer1 as clockevent timer */
ret = setup_irq(irq, &orion_clkevt_irq);
ret = request_irq(irq, orion_clkevt_irq_handler, IRQF_TIMER,
"orion_event", NULL);
if (ret) {
pr_err("%pOFn: unable to setup irq\n", np);
return ret;
......
......@@ -135,8 +135,11 @@ static int __init owl_timer_init(struct device_node *node)
}
clk = of_clk_get(node, 0);
if (IS_ERR(clk))
return PTR_ERR(clk);
if (IS_ERR(clk)) {
ret = PTR_ERR(clk);
pr_err("Failed to get clock for clocksource (%d)\n", ret);
return ret;
}
rate = clk_get_rate(clk);
......@@ -144,8 +147,12 @@ static int __init owl_timer_init(struct device_node *node)
owl_timer_set_enabled(owl_clksrc_base, true);
sched_clock_register(owl_timer_sched_read, 32, rate);
clocksource_mmio_init(owl_clksrc_base + OWL_Tx_VAL, node->name,
rate, 200, 32, clocksource_mmio_readl_up);
ret = clocksource_mmio_init(owl_clksrc_base + OWL_Tx_VAL, node->name,
rate, 200, 32, clocksource_mmio_readl_up);
if (ret) {
pr_err("Failed to register clocksource (%d)\n", ret);
return ret;
}
owl_timer_reset(owl_clkevt_base);
......
......@@ -165,14 +165,6 @@ static struct clocksource sirfsoc_clocksource = {
.resume = sirfsoc_clocksource_resume,
};
static struct irqaction sirfsoc_timer_irq = {
.name = "sirfsoc_timer0",
.flags = IRQF_TIMER,
.irq = 0,
.handler = sirfsoc_timer_interrupt,
.dev_id = &sirfsoc_clockevent,
};
/* Overwrite weak default sched_clock with more precise one */
static u64 notrace sirfsoc_read_sched_clock(void)
{
......@@ -190,6 +182,7 @@ static void __init sirfsoc_clockevent_init(void)
static int __init sirfsoc_prima2_timer_init(struct device_node *np)
{
unsigned long rate;
unsigned int irq;
struct clk *clk;
int ret;
......@@ -218,7 +211,7 @@ static int __init sirfsoc_prima2_timer_init(struct device_node *np)
return -ENXIO;
}
sirfsoc_timer_irq.irq = irq_of_parse_and_map(np, 0);
irq = irq_of_parse_and_map(np, 0);
writel_relaxed(rate / PRIMA2_CLOCK_FREQ / 2 - 1,
sirfsoc_timer_base + SIRFSOC_TIMER_DIV);
......@@ -234,7 +227,8 @@ static int __init sirfsoc_prima2_timer_init(struct device_node *np)
sched_clock_register(sirfsoc_read_sched_clock, 64, PRIMA2_CLOCK_FREQ);
ret = setup_irq(sirfsoc_timer_irq.irq, &sirfsoc_timer_irq);
ret = request_irq(irq, sirfsoc_timer_interrupt, IRQF_TIMER,
"sirfsoc_timer0", &sirfsoc_clockevent);
if (ret) {
pr_err("Failed to setup irq\n");
return ret;
......
......@@ -143,13 +143,6 @@ static struct clock_event_device ckevt_pxa_osmr0 = {
.resume = pxa_timer_resume,
};
static struct irqaction pxa_ost0_irq = {
.name = "ost0",
.flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = pxa_ost0_interrupt,
.dev_id = &ckevt_pxa_osmr0,
};
static int __init pxa_timer_common_init(int irq, unsigned long clock_tick_rate)
{
int ret;
......@@ -161,7 +154,8 @@ static int __init pxa_timer_common_init(int irq, unsigned long clock_tick_rate)
ckevt_pxa_osmr0.cpumask = cpumask_of(0);
ret = setup_irq(irq, &pxa_ost0_irq);
ret = request_irq(irq, pxa_ost0_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
"ost0", &ckevt_pxa_osmr0);
if (ret) {
pr_err("Failed to setup irq\n");
return ret;
......
......@@ -168,13 +168,6 @@ static struct clock_event_device sp804_clockevent = {
.rating = 300,
};
static struct irqaction sp804_timer_irq = {
.name = "timer",
.flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = sp804_timer_interrupt,
.dev_id = &sp804_clockevent,
};
int __init __sp804_clockevents_init(void __iomem *base, unsigned int irq, struct clk *clk, const char *name)
{
struct clock_event_device *evt = &sp804_clockevent;
......@@ -200,7 +193,9 @@ int __init __sp804_clockevents_init(void __iomem *base, unsigned int irq, struct
writel(0, base + TIMER_CTRL);
setup_irq(irq, &sp804_timer_irq);
if (request_irq(irq, sp804_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
"timer", &sp804_clockevent))
pr_err("%s: request_irq() failed\n", "timer");
clockevents_config_and_register(evt, rate, 0xf, 0xffffffff);
return 0;
......
This diff is collapsed.
......@@ -330,12 +330,6 @@ static irqreturn_t u300_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction u300_timer_irq = {
.name = "U300 Timer Tick",
.flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = u300_timer_interrupt,
};
/*
* Override the global weak sched_clock symbol with this
* local implementation which uses the clocksource to get some
......@@ -420,7 +414,8 @@ static int __init u300_timer_init_of(struct device_node *np)
u300_timer_base + U300_TIMER_APP_RGPT1);
/* Set up the IRQ handler */
ret = setup_irq(irq, &u300_timer_irq);
ret = request_irq(irq, u300_timer_interrupt,
IRQF_TIMER | IRQF_IRQPOLL, "U300 Timer Tick", NULL);
if (ret)
return ret;
......
......@@ -123,19 +123,13 @@ static struct clock_event_device clockevent_pit = {
.rating = 300,
};
static struct irqaction pit_timer_irq = {
.name = "VF pit timer",
.flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = pit_timer_interrupt,
.dev_id = &clockevent_pit,
};
static int __init pit_clockevent_init(unsigned long rate, int irq)
{
__raw_writel(0, clkevt_base + PITTCTRL);
__raw_writel(PITTFLG_TIF, clkevt_base + PITTFLG);
BUG_ON(setup_irq(irq, &pit_timer_irq));
BUG_ON(request_irq(irq, pit_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
"VF pit timer", &clockevent_pit);
clockevent_pit.cpumask = cpumask_of(0);
clockevent_pit.irq = irq;
......
......@@ -101,13 +101,6 @@ static irqreturn_t vt8500_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
static struct irqaction irq = {
.name = "vt8500_timer",
.flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = vt8500_timer_interrupt,
.dev_id = &clockevent,
};
static int __init vt8500_timer_init(struct device_node *np)
{
int timer_irq, ret;
......@@ -139,7 +132,9 @@ static int __init vt8500_timer_init(struct device_node *np)
clockevent.cpumask = cpumask_of(0);
ret = setup_irq(timer_irq, &irq);
ret = request_irq(timer_irq, vt8500_timer_interrupt,
IRQF_TIMER | IRQF_IRQPOLL, "vt8500_timer",
&clockevent);
if (ret) {
pr_err("%s: setup_irq failed for %s\n", __func__,
clockevent.name);
......
......@@ -53,7 +53,6 @@ struct zevio_timer {
struct clk *clk;
struct clock_event_device clkevt;
struct irqaction clkevt_irq;
char clocksource_name[64];
char clockevent_name[64];
......@@ -172,12 +171,12 @@ static int __init zevio_timer_add(struct device_node *node)
/* Interrupt to occur when timer value matches 0 */
writel(0, timer->base + IO_MATCH(TIMER_MATCH));
timer->clkevt_irq.name = timer->clockevent_name;
timer->clkevt_irq.handler = zevio_timer_interrupt;
timer->clkevt_irq.dev_id = timer;
timer->clkevt_irq.flags = IRQF_TIMER | IRQF_IRQPOLL;
setup_irq(irqnr, &timer->clkevt_irq);
if (request_irq(irqnr, zevio_timer_interrupt,
IRQF_TIMER | IRQF_IRQPOLL,
timer->clockevent_name, timer)) {
pr_err("%s: request_irq() failed\n",
timer->clockevent_name);
}
clockevents_config_and_register(&timer->clkevt,
clk_get_rate(timer->clk), 0x0001, 0xffff);
......
......@@ -183,7 +183,7 @@ static int pwm_omap_dmtimer_config(struct pwm_chip *chip,
if (timer_active)
omap->pdata->stop(omap->dm_timer);
omap->pdata->set_load(omap->dm_timer, true, load_value);
omap->pdata->set_load(omap->dm_timer, load_value);
omap->pdata->set_match(omap->dm_timer, true, match_value);
dev_dbg(chip->dev, "load value: %#08x (%d), match value: %#08x (%d)\n",
......@@ -192,7 +192,8 @@ static int pwm_omap_dmtimer_config(struct pwm_chip *chip,
omap->pdata->set_pwm(omap->dm_timer,
pwm_get_polarity(pwm) == PWM_POLARITY_INVERSED,
true,
PWM_OMAP_DMTIMER_TRIGGER_OVERFLOW_AND_COMPARE);
PWM_OMAP_DMTIMER_TRIGGER_OVERFLOW_AND_COMPARE,
true);
/* If config was called while timer was running it must be reenabled. */
if (timer_active)
......@@ -222,7 +223,8 @@ static int pwm_omap_dmtimer_set_polarity(struct pwm_chip *chip,
omap->pdata->set_pwm(omap->dm_timer,
polarity == PWM_POLARITY_INVERSED,
true,
PWM_OMAP_DMTIMER_TRIGGER_OVERFLOW_AND_COMPARE);
PWM_OMAP_DMTIMER_TRIGGER_OVERFLOW_AND_COMPARE,
true);
mutex_unlock(&omap->mutex);
return 0;
......
......@@ -11,20 +11,6 @@ static __always_inline struct vdso_data *__arch_get_k_vdso_data(void)
}
#endif /* __arch_get_k_vdso_data */
#ifndef __arch_update_vdso_data
static __always_inline bool __arch_update_vdso_data(void)
{
return true;
}
#endif /* __arch_update_vdso_data */
#ifndef __arch_get_clock_mode
static __always_inline int __arch_get_clock_mode(struct timekeeper *tk)
{
return 0;
}
#endif /* __arch_get_clock_mode */
#ifndef __arch_update_vsyscall
static __always_inline void __arch_update_vsyscall(struct vdso_data *vdata,
struct timekeeper *tk)
......
......@@ -105,17 +105,17 @@ struct omap_dm_timer {
void __iomem *pend; /* write pending */
void __iomem *func_base; /* function register base */
atomic_t enabled;
unsigned long rate;
unsigned reserved:1;
unsigned posted:1;
struct timer_regs context;
int (*get_context_loss_count)(struct device *);
int ctx_loss_count;
int revision;
u32 capability;
u32 errata;
struct platform_device *pdev;
struct list_head node;
struct notifier_block nb;
};
int omap_dm_timer_reserve_systimer(int id);
......
......@@ -3,9 +3,9 @@
#define __LINUX_BITS_H
#include <linux/const.h>
#include <vdso/bits.h>
#include <asm/bitsperlong.h>
#define BIT(nr) (UL(1) << (nr))
#define BIT_ULL(nr) (ULL(1) << (nr))
#define BIT_MASK(nr) (UL(1) << ((nr) % BITS_PER_LONG))
#define BIT_WORD(nr) ((nr) / BITS_PER_LONG)
......
......@@ -23,18 +23,31 @@
struct clocksource;
struct module;
#ifdef CONFIG_ARCH_CLOCKSOURCE_DATA
#if defined(CONFIG_ARCH_CLOCKSOURCE_DATA) || \
defined(CONFIG_GENERIC_GETTIMEOFDAY)
#include <asm/clocksource.h>
#endif
#include <vdso/clocksource.h>
/**
* struct clocksource - hardware abstraction for a free running counter
* Provides mostly state-free accessors to the underlying hardware.
* This is the structure used for system time.
*
* @name: ptr to clocksource name
* @list: list head for registration
* @rating: rating value for selection (higher is better)
* @read: Returns a cycle value, passes clocksource as argument
* @mask: Bitmask for two's complement
* subtraction of non 64 bit counters
* @mult: Cycle to nanosecond multiplier
* @shift: Cycle to nanosecond divisor (power of two)
* @max_idle_ns: Maximum idle time permitted by the clocksource (nsecs)
* @maxadj: Maximum adjustment value to mult (~11%)
* @archdata: Optional arch-specific data
* @max_cycles: Maximum safe cycle value which won't overflow on
* multiplication
* @name: Pointer to clocksource name
* @list: List head for registration (internal)
* @rating: Rating value for selection (higher is better)
* To avoid rating inflation the following
* list should give you a guide as to how
* to assign your clocksource a rating
......@@ -49,27 +62,23 @@ struct module;
* 400-499: Perfect
* The ideal clocksource. A must-use where
* available.
* @read: returns a cycle value, passes clocksource as argument
* @enable: optional function to enable the clocksource
* @disable: optional function to disable the clocksource
* @mask: bitmask for two's complement
* subtraction of non 64 bit counters
* @mult: cycle to nanosecond multiplier
* @shift: cycle to nanosecond divisor (power of two)
* @max_idle_ns: max idle time permitted by the clocksource (nsecs)
* @maxadj: maximum adjustment value to mult (~11%)
* @max_cycles: maximum safe cycle value which won't overflow on multiplication
* @flags: flags describing special properties
* @archdata: arch-specific data
* @suspend: suspend function for the clocksource, if necessary
* @resume: resume function for the clocksource, if necessary
* @flags: Flags describing special properties
* @enable: Optional function to enable the clocksource
* @disable: Optional function to disable the clocksource
* @suspend: Optional suspend function for the clocksource
* @resume: Optional resume function for the clocksource
* @mark_unstable: Optional function to inform the clocksource driver that
* the watchdog marked the clocksource unstable
* @owner: module reference, must be set by clocksource in modules
* @tick_stable: Optional function called periodically from the watchdog
* code to provide stable syncrhonization points
* @wd_list: List head to enqueue into the watchdog list (internal)
* @cs_last: Last clocksource value for clocksource watchdog
* @wd_last: Last watchdog value corresponding to @cs_last
* @owner: Module reference, must be set by clocksource in modules
*
* Note: This struct is not used in hotpathes of the timekeeping code
* because the timekeeper caches the hot path fields in its own data
* structure, so no line cache alignment is required,
* structure, so no cache line alignment is required,
*
* The pointer to the clocksource itself is handed to the read
* callback. If you need extra information there you can wrap struct
......@@ -78,35 +87,37 @@ struct module;
* structure.
*/
struct clocksource {
u64 (*read)(struct clocksource *cs);
u64 mask;
u32 mult;
u32 shift;
u64 max_idle_ns;
u32 maxadj;
u64 (*read)(struct clocksource *cs);
u64 mask;
u32 mult;
u32 shift;
u64 max_idle_ns;
u32 maxadj;
#ifdef CONFIG_ARCH_CLOCKSOURCE_DATA
struct arch_clocksource_data archdata;
#endif
u64 max_cycles;
const char *name;
struct list_head list;
int rating;
int (*enable)(struct clocksource *cs);
void (*disable)(struct clocksource *cs);
unsigned long flags;
void (*suspend)(struct clocksource *cs);
void (*resume)(struct clocksource *cs);
void (*mark_unstable)(struct clocksource *cs);
void (*tick_stable)(struct clocksource *cs);
u64 max_cycles;
const char *name;
struct list_head list;
int rating;
enum vdso_clock_mode vdso_clock_mode;
unsigned long flags;
int (*enable)(struct clocksource *cs);
void (*disable)(struct clocksource *cs);
void (*suspend)(struct clocksource *cs);
void (*resume)(struct clocksource *cs);
void (*mark_unstable)(struct clocksource *cs);
void (*tick_stable)(struct clocksource *cs);
/* private: */
#ifdef CONFIG_CLOCKSOURCE_WATCHDOG
/* Watchdog related data, used by the framework */
struct list_head wd_list;
u64 cs_last;
u64 wd_last;
struct list_head wd_list;
u64 cs_last;
u64 wd_last;
#endif
struct module *owner;
struct module *owner;
};
/*
......
#ifndef _LINUX_CONST_H
#define _LINUX_CONST_H
#include <uapi/linux/const.h>
#define UL(x) (_UL(x))
#define ULL(x) (_ULL(x))
#include <vdso/const.h>
#endif /* _LINUX_CONST_H */
......@@ -25,7 +25,6 @@ struct dw_apb_timer {
struct dw_apb_clock_event_device {
struct clock_event_device ced;
struct dw_apb_timer timer;
struct irqaction irqaction;
void (*eoi)(struct dw_apb_timer *);
};
......
......@@ -59,7 +59,7 @@
ELFNOTE_END
#else /* !__ASSEMBLER__ */
#include <linux/elf.h>
#include <uapi/linux/elf.h>
/*
* Use an anonymous structure which matches the shape of
* Elf{32,64}_Nhdr, but includes the name and desc data. The size and
......
......@@ -8,6 +8,7 @@
#include <linux/types.h>
#include <linux/time.h>
#include <linux/timex.h>
#include <vdso/jiffies.h>
#include <asm/param.h> /* for HZ */
#include <generated/timeconst.h>
......@@ -59,9 +60,6 @@
extern int register_refined_jiffies(long clock_tick_rate);
/* TICK_NSEC is the time between ticks in nsec assuming SHIFTED_HZ */
#define TICK_NSEC ((NSEC_PER_SEC+HZ/2)/HZ)
/* TICK_USEC is the time between ticks in usec assuming SHIFTED_HZ */
#define TICK_USEC ((USEC_PER_SEC + HZ/2) / HZ)
......
......@@ -216,14 +216,7 @@ static inline __must_check bool ktime_to_timespec64_cond(const ktime_t kt,
}
}
/*
* The resolution of the clocks. The resolution value is returned in
* the clock_getres() system call to give application programmers an
* idea of the (in)accuracy of timers. Timer values are rounded up to
* this resolution values.
*/
#define LOW_RES_NSEC TICK_NSEC
#define KTIME_LOW_RES (LOW_RES_NSEC)
#include <vdso/ktime.h>
static inline ktime_t ns_to_ktime(u64 ns)
{
......
......@@ -4,19 +4,8 @@
#include <uapi/linux/limits.h>
#include <linux/types.h>
#include <vdso/limits.h>
#define USHRT_MAX ((unsigned short)~0U)
#define SHRT_MAX ((short)(USHRT_MAX >> 1))
#define SHRT_MIN ((short)(-SHRT_MAX - 1))
#define INT_MAX ((int)(~0U >> 1))
#define INT_MIN (-INT_MAX - 1)
#define UINT_MAX (~0U)
#define LONG_MAX ((long)(~0UL >> 1))
#define LONG_MIN (-LONG_MAX - 1)
#define ULONG_MAX (~0UL)
#define LLONG_MAX ((long long)(~0ULL >> 1))
#define LLONG_MIN (-LLONG_MAX - 1)
#define ULLONG_MAX (~0ULL)
#define SIZE_MAX (~(size_t)0)
#define PHYS_ADDR_MAX (~(phys_addr_t)0)
......
......@@ -3,6 +3,7 @@
#define _LINUX_MATH64_H
#include <linux/types.h>
#include <vdso/math64.h>
#include <asm/div64.h>
#if BITS_PER_LONG == 64
......@@ -142,25 +143,6 @@ static inline s64 div_s64(s64 dividend, s32 divisor)
u32 iter_div_u64_rem(u64 dividend, u32 divisor, u64 *remainder);
static __always_inline u32
__iter_div_u64_rem(u64 dividend, u32 divisor, u64 *remainder)
{
u32 ret = 0;
while (dividend >= divisor) {
/* The following asm() prevents the compiler from
optimising this loop into a modulo operation. */
asm("" : "+rm"(dividend));
dividend -= divisor;
ret++;
}
*remainder = dividend;
return ret;
}
#ifndef mul_u32_u32
/*
* Many a GCC version messes this up and generates a 64x64 mult :-(
......
......@@ -30,12 +30,12 @@ struct omap_dm_timer_ops {
int (*stop)(struct omap_dm_timer *timer);
int (*set_source)(struct omap_dm_timer *timer, int source);
int (*set_load)(struct omap_dm_timer *timer, int autoreload,
unsigned int value);
int (*set_load)(struct omap_dm_timer *timer, unsigned int value);
int (*set_match)(struct omap_dm_timer *timer, int enable,
unsigned int match);
int (*set_pwm)(struct omap_dm_timer *timer, int def_on,
int toggle, int trigger);
int toggle, int trigger, int autoreload);
int (*get_pwm_status)(struct omap_dm_timer *timer);
int (*set_prescaler)(struct omap_dm_timer *timer, int prescaler);
unsigned int (*read_counter)(struct omap_dm_timer *timer);
......
......@@ -69,7 +69,7 @@ static inline int clockid_to_fd(const clockid_t clk)
struct cpu_timer {
struct timerqueue_node node;
struct timerqueue_head *head;
struct task_struct *task;
struct pid *pid;
struct list_head elist;
int firing;
};
......
......@@ -111,9 +111,6 @@ static inline bool itimerspec64_valid(const struct itimerspec64 *its)
*/
#define time_between32(t, l, h) ((u32)(h) - (u32)(l) >= (u32)(t) - (u32)(l))
struct timens_offset {
s64 sec;
u64 nsec;
};
# include <vdso/time.h>
#endif
......@@ -12,17 +12,7 @@
#include <linux/time64.h>
#include <linux/timex.h>
typedef s32 old_time32_t;
struct old_timespec32 {
old_time32_t tv_sec;
s32 tv_nsec;
};
struct old_timeval32 {
old_time32_t tv_sec;
s32 tv_usec;
};
#include <vdso/time32.h>
struct old_itimerspec32 {
struct old_timespec32 it_interval;
......
......@@ -3,6 +3,7 @@
#define _LINUX_TIME64_H
#include <linux/math64.h>
#include <vdso/time64.h>
typedef __s64 time64_t;
typedef __u64 timeu64_t;
......@@ -19,15 +20,6 @@ struct itimerspec64 {
struct timespec64 it_value;
};
/* Parameters used to convert the timespec values: */
#define MSEC_PER_SEC 1000L
#define USEC_PER_MSEC 1000L
#define NSEC_PER_USEC 1000L
#define NSEC_PER_MSEC 1000000L
#define USEC_PER_SEC 1000000L
#define NSEC_PER_SEC 1000000000L
#define FSEC_PER_SEC 1000000000000000LL
/* Located here for timespec[64]_valid_strict */
#define TIME64_MAX ((s64)~((u64)1 << 63))
#define TIME64_MIN (-TIME64_MAX - 1)
......
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __VDSO_BITS_H
#define __VDSO_BITS_H
#include <vdso/const.h>
#define BIT(nr) (UL(1) << (nr))
#endif /* __VDSO_BITS_H */
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment