Commit dbb4e67f authored by Murali Karicheri's avatar Murali Karicheri Committed by Santosh Shilimkar

clk: keystone: use clkod register bits for postdiv

DDR3A/B, ARM and PA PLL controllers have clkod register bits for
configuring postdiv values. So use it instead of using fixed
post dividers for these pll controllers. Assume that if fixed-postdiv
attribute is not present, use clkod register value for pistdiv.

Also update the Documentation of bindings to reflect the same.

Cc: Mike Turquette <mturquette@linaro.org
Signed-off-by: default avatarMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: default avatarSantosh Shilimkar <santosh.shilimkar@ti.com>
parent 6ce4eac1
......@@ -17,13 +17,14 @@ Required properties:
- reg - pll control0 and pll multipler registers
- reg-names : control and multiplier. The multiplier is applicable only for
main pll clock
- fixed-postdiv : fixed post divider value
- fixed-postdiv : fixed post divider value. If absent, use clkod register bits
for postdiv
Example:
mainpllclk: mainpllclk@2310110 {
#clock-cells = <0>;
compatible = "ti,keystone,main-pll-clock";
clocks = <&refclkmain>;
clocks = <&refclksys>;
reg = <0x02620350 4>, <0x02310110 4>;
reg-names = "control", "multiplier";
fixed-postdiv = <2>;
......@@ -32,11 +33,10 @@ Example:
papllclk: papllclk@2620358 {
#clock-cells = <0>;
compatible = "ti,keystone,pll-clock";
clocks = <&refclkmain>;
clocks = <&refclkpass>;
clock-output-names = "pa-pll-clk";
reg = <0x02620358 4>;
reg-names = "control";
fixed-postdiv = <6>;
};
Required properties:
......
......@@ -24,6 +24,8 @@
#define MAIN_PLLM_HIGH_MASK 0x7f000
#define PLLM_HIGH_SHIFT 6
#define PLLD_MASK 0x3f
#define CLKOD_MASK 0x780000
#define CLKOD_SHIFT 19
/**
* struct clk_pll_data - pll data structure
......@@ -41,7 +43,10 @@
* @pllm_upper_mask: multiplier upper mask
* @pllm_upper_shift: multiplier upper shift
* @plld_mask: divider mask
* @postdiv: Post divider
* @clkod_mask: output divider mask
* @clkod_shift: output divider shift
* @plld_mask: divider mask
* @postdiv: Fixed post divider
*/
struct clk_pll_data {
bool has_pllctrl;
......@@ -53,6 +58,8 @@ struct clk_pll_data {
u32 pllm_upper_mask;
u32 pllm_upper_shift;
u32 plld_mask;
u32 clkod_mask;
u32 clkod_shift;
u32 postdiv;
};
......@@ -90,7 +97,13 @@ static unsigned long clk_pllclk_recalc(struct clk_hw *hw,
mult |= ((val & pll_data->pllm_upper_mask)
>> pll_data->pllm_upper_shift);
prediv = (val & pll_data->plld_mask);
postdiv = pll_data->postdiv;
if (!pll_data->has_pllctrl)
/* read post divider from od bits*/
postdiv = ((val & pll_data->clkod_mask) >>
pll_data->clkod_shift) + 1;
else
postdiv = pll_data->postdiv;
rate /= (prediv + 1);
rate = (rate * (mult + 1));
......@@ -155,8 +168,11 @@ static void __init _of_pll_clk_init(struct device_node *node, bool pllctrl)
}
parent_name = of_clk_get_parent_name(node, 0);
if (of_property_read_u32(node, "fixed-postdiv", &pll_data->postdiv))
goto out;
if (of_property_read_u32(node, "fixed-postdiv", &pll_data->postdiv)) {
/* assume the PLL has output divider register bits */
pll_data->clkod_mask = CLKOD_MASK;
pll_data->clkod_shift = CLKOD_SHIFT;
}
i = of_property_match_string(node, "reg-names", "control");
pll_data->pll_ctl0 = of_iomap(node, i);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment