Commit dbde7ec3 authored by Fabio Estevam's avatar Fabio Estevam Committed by Shawn Guo

arm64: dts: imx8mq: Move the opp table out of bus node

Move opp-table node from soc node to root node.

opp-table node does not have any register properties and thus
shouldn't be placed inside the bus.

This fixes the following build warnings with W=1:

arch/arm64/boot/dts/freescale/imx8mq.dtsi:687.28-703.5: Warning (simple_bus_reg): /soc@0/opp-table: missing or empty reg/ranges property

Fixes: 64d26f8c ("arm64: dts: imx8mq: Add the opp table and cores opp properties")
Signed-off-by: default avatarFabio Estevam <festevam@gmail.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 00f1dac3
...@@ -137,6 +137,24 @@ A53_L2: l2-cache0 { ...@@ -137,6 +137,24 @@ A53_L2: l2-cache0 {
}; };
}; };
a53_opp_table: opp-table {
compatible = "operating-points-v2";
opp-shared;
opp-800000000 {
opp-hz = /bits/ 64 <800000000>;
opp-microvolt = <900000>;
clock-latency-ns = <150000>;
};
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <1000000>;
clock-latency-ns = <150000>;
opp-suspend;
};
};
pmu { pmu {
compatible = "arm,cortex-a53-pmu"; compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
...@@ -838,25 +856,6 @@ usb3_phy1: usb-phy@382f0040 { ...@@ -838,25 +856,6 @@ usb3_phy1: usb-phy@382f0040 {
status = "disabled"; status = "disabled";
}; };
a53_opp_table: opp-table {
compatible = "operating-points-v2";
opp-shared;
opp-800000000 {
opp-hz = /bits/ 64 <800000000>;
opp-microvolt = <900000>;
clock-latency-ns = <150000>;
};
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <1000000>;
clock-latency-ns = <150000>;
opp-suspend;
};
};
gic: interrupt-controller@38800000 { gic: interrupt-controller@38800000 {
compatible = "arm,gic-v3"; compatible = "arm,gic-v3";
reg = <0x38800000 0x10000>, /* GIC Dist */ reg = <0x38800000 0x10000>, /* GIC Dist */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment