dmaengine: PL08x: get rid of unnecessary checks in dma_slave_config

Get rid of the unnecessary checks in dma_slave_config utilizing
the DMA direction.  This allows us to move the computation of
cctl to the prepare function.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mach-spear3xx/spear300.c

@@ -120,182 +120,156 @@ struct pl08x_channel_data spear300_dma_info[] = {
 		.min_signal = 2,
 		.max_signal = 2,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "uart0_tx",
 		.min_signal = 3,
 		.max_signal = 3,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ssp0_rx",
 		.min_signal = 8,
 		.max_signal = 8,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ssp0_tx",
 		.min_signal = 9,
 		.max_signal = 9,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "i2c_rx",
 		.min_signal = 10,
 		.max_signal = 10,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "i2c_tx",
 		.min_signal = 11,
 		.max_signal = 11,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "irda",
 		.min_signal = 12,
 		.max_signal = 12,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "adc",
 		.min_signal = 13,
 		.max_signal = 13,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "to_jpeg",
 		.min_signal = 14,
 		.max_signal = 14,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "from_jpeg",
 		.min_signal = 15,
 		.max_signal = 15,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ras0_rx",
 		.min_signal = 0,
 		.max_signal = 0,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ras0_tx",
 		.min_signal = 1,
 		.max_signal = 1,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ras1_rx",
 		.min_signal = 2,
 		.max_signal = 2,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ras1_tx",
 		.min_signal = 3,
 		.max_signal = 3,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ras2_rx",
 		.min_signal = 4,
 		.max_signal = 4,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ras2_tx",
 		.min_signal = 5,
 		.max_signal = 5,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ras3_rx",
 		.min_signal = 6,
 		.max_signal = 6,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ras3_tx",
 		.min_signal = 7,
 		.max_signal = 7,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ras4_rx",
 		.min_signal = 8,
 		.max_signal = 8,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ras4_tx",
 		.min_signal = 9,
 		.max_signal = 9,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ras5_rx",
 		.min_signal = 10,
 		.max_signal = 10,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ras5_tx",
 		.min_signal = 11,
 		.max_signal = 11,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ras6_rx",
 		.min_signal = 12,
 		.max_signal = 12,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ras6_tx",
 		.min_signal = 13,
 		.max_signal = 13,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ras7_rx",
 		.min_signal = 14,
 		.max_signal = 14,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ras7_tx",
 		.min_signal = 15,
 		.max_signal = 15,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	},
 };

arch/arm/mach-spear3xx/spear310.c

@@ -205,182 +205,156 @@ struct pl08x_channel_data spear310_dma_info[] = {
 		.min_signal = 2,
 		.max_signal = 2,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "uart0_tx",
 		.min_signal = 3,
 		.max_signal = 3,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ssp0_rx",
 		.min_signal = 8,
 		.max_signal = 8,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ssp0_tx",
 		.min_signal = 9,
 		.max_signal = 9,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "i2c_rx",
 		.min_signal = 10,
 		.max_signal = 10,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "i2c_tx",
 		.min_signal = 11,
 		.max_signal = 11,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "irda",
 		.min_signal = 12,
 		.max_signal = 12,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "adc",
 		.min_signal = 13,
 		.max_signal = 13,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "to_jpeg",
 		.min_signal = 14,
 		.max_signal = 14,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "from_jpeg",
 		.min_signal = 15,
 		.max_signal = 15,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "uart1_rx",
 		.min_signal = 0,
 		.max_signal = 0,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "uart1_tx",
 		.min_signal = 1,
 		.max_signal = 1,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "uart2_rx",
 		.min_signal = 2,
 		.max_signal = 2,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "uart2_tx",
 		.min_signal = 3,
 		.max_signal = 3,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "uart3_rx",
 		.min_signal = 4,
 		.max_signal = 4,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "uart3_tx",
 		.min_signal = 5,
 		.max_signal = 5,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "uart4_rx",
 		.min_signal = 6,
 		.max_signal = 6,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "uart4_tx",
 		.min_signal = 7,
 		.max_signal = 7,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "uart5_rx",
 		.min_signal = 8,
 		.max_signal = 8,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "uart5_tx",
 		.min_signal = 9,
 		.max_signal = 9,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ras5_rx",
 		.min_signal = 10,
 		.max_signal = 10,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ras5_tx",
 		.min_signal = 11,
 		.max_signal = 11,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ras6_rx",
 		.min_signal = 12,
 		.max_signal = 12,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ras6_tx",
 		.min_signal = 13,
 		.max_signal = 13,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ras7_rx",
 		.min_signal = 14,
 		.max_signal = 14,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ras7_tx",
 		.min_signal = 15,
 		.max_signal = 15,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	},
 };

arch/arm/mach-spear3xx/spear320.c

@@ -213,182 +213,156 @@ struct pl08x_channel_data spear320_dma_info[] = {
 		.min_signal = 2,
 		.max_signal = 2,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "uart0_tx",
 		.min_signal = 3,
 		.max_signal = 3,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ssp0_rx",
 		.min_signal = 8,
 		.max_signal = 8,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ssp0_tx",
 		.min_signal = 9,
 		.max_signal = 9,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "i2c0_rx",
 		.min_signal = 10,
 		.max_signal = 10,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "i2c0_tx",
 		.min_signal = 11,
 		.max_signal = 11,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "irda",
 		.min_signal = 12,
 		.max_signal = 12,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "adc",
 		.min_signal = 13,
 		.max_signal = 13,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "to_jpeg",
 		.min_signal = 14,
 		.max_signal = 14,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "from_jpeg",
 		.min_signal = 15,
 		.max_signal = 15,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ssp1_rx",
 		.min_signal = 0,
 		.max_signal = 0,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB2,
 	}, {
 		.bus_id = "ssp1_tx",
 		.min_signal = 1,
 		.max_signal = 1,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB2,
 	}, {
 		.bus_id = "ssp2_rx",
 		.min_signal = 2,
 		.max_signal = 2,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB2,
 	}, {
 		.bus_id = "ssp2_tx",
 		.min_signal = 3,
 		.max_signal = 3,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB2,
 	}, {
 		.bus_id = "uart1_rx",
 		.min_signal = 4,
 		.max_signal = 4,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB2,
 	}, {
 		.bus_id = "uart1_tx",
 		.min_signal = 5,
 		.max_signal = 5,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB2,
 	}, {
 		.bus_id = "uart2_rx",
 		.min_signal = 6,
 		.max_signal = 6,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB2,
 	}, {
 		.bus_id = "uart2_tx",
 		.min_signal = 7,
 		.max_signal = 7,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB2,
 	}, {
 		.bus_id = "i2c1_rx",
 		.min_signal = 8,
 		.max_signal = 8,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB2,
 	}, {
 		.bus_id = "i2c1_tx",
 		.min_signal = 9,
 		.max_signal = 9,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB2,
 	}, {
 		.bus_id = "i2c2_rx",
 		.min_signal = 10,
 		.max_signal = 10,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB2,
 	}, {
 		.bus_id = "i2c2_tx",
 		.min_signal = 11,
 		.max_signal = 11,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB2,
 	}, {
 		.bus_id = "i2s_rx",
 		.min_signal = 12,
 		.max_signal = 12,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB2,
 	}, {
 		.bus_id = "i2s_tx",
 		.min_signal = 13,
 		.max_signal = 13,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB2,
 	}, {
 		.bus_id = "rs485_rx",
 		.min_signal = 14,
 		.max_signal = 14,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB2,
 	}, {
 		.bus_id = "rs485_tx",
 		.min_signal = 15,
 		.max_signal = 15,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB2,
 	},
 };

arch/arm/mach-spear3xx/spear3xx.c

@@ -46,7 +46,8 @@ struct pl022_ssp_controller pl022_plat_data = {
 struct pl08x_platform_data pl080_plat_data = {
 	.memcpy_channel = {
 		.bus_id = "memcpy",
-		.cctl = (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \
+		.cctl_memcpy =
+			(PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \
 			PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \
 			PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \
 			PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \

arch/arm/mach-spear6xx/spear6xx.c

@@ -36,336 +36,288 @@ static struct pl08x_channel_data spear600_dma_info[] = {
 		.min_signal = 0,
 		.max_signal = 0,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ssp1_tx",
 		.min_signal = 1,
 		.max_signal = 1,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "uart0_rx",
 		.min_signal = 2,
 		.max_signal = 2,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "uart0_tx",
 		.min_signal = 3,
 		.max_signal = 3,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "uart1_rx",
 		.min_signal = 4,
 		.max_signal = 4,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "uart1_tx",
 		.min_signal = 5,
 		.max_signal = 5,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ssp2_rx",
 		.min_signal = 6,
 		.max_signal = 6,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB2,
 	}, {
 		.bus_id = "ssp2_tx",
 		.min_signal = 7,
 		.max_signal = 7,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB2,
 	}, {
 		.bus_id = "ssp0_rx",
 		.min_signal = 8,
 		.max_signal = 8,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ssp0_tx",
 		.min_signal = 9,
 		.max_signal = 9,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "i2c_rx",
 		.min_signal = 10,
 		.max_signal = 10,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "i2c_tx",
 		.min_signal = 11,
 		.max_signal = 11,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "irda",
 		.min_signal = 12,
 		.max_signal = 12,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "adc",
 		.min_signal = 13,
 		.max_signal = 13,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB2,
 	}, {
 		.bus_id = "to_jpeg",
 		.min_signal = 14,
 		.max_signal = 14,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "from_jpeg",
 		.min_signal = 15,
 		.max_signal = 15,
 		.muxval = 0,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ras0_rx",
 		.min_signal = 0,
 		.max_signal = 0,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ras0_tx",
 		.min_signal = 1,
 		.max_signal = 1,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ras1_rx",
 		.min_signal = 2,
 		.max_signal = 2,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ras1_tx",
 		.min_signal = 3,
 		.max_signal = 3,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ras2_rx",
 		.min_signal = 4,
 		.max_signal = 4,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ras2_tx",
 		.min_signal = 5,
 		.max_signal = 5,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ras3_rx",
 		.min_signal = 6,
 		.max_signal = 6,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ras3_tx",
 		.min_signal = 7,
 		.max_signal = 7,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ras4_rx",
 		.min_signal = 8,
 		.max_signal = 8,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ras4_tx",
 		.min_signal = 9,
 		.max_signal = 9,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ras5_rx",
 		.min_signal = 10,
 		.max_signal = 10,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ras5_tx",
 		.min_signal = 11,
 		.max_signal = 11,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ras6_rx",
 		.min_signal = 12,
 		.max_signal = 12,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ras6_tx",
 		.min_signal = 13,
 		.max_signal = 13,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ras7_rx",
 		.min_signal = 14,
 		.max_signal = 14,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ras7_tx",
 		.min_signal = 15,
 		.max_signal = 15,
 		.muxval = 1,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB1,
 	}, {
 		.bus_id = "ext0_rx",
 		.min_signal = 0,
 		.max_signal = 0,
 		.muxval = 2,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB2,
 	}, {
 		.bus_id = "ext0_tx",
 		.min_signal = 1,
 		.max_signal = 1,
 		.muxval = 2,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB2,
 	}, {
 		.bus_id = "ext1_rx",
 		.min_signal = 2,
 		.max_signal = 2,
 		.muxval = 2,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB2,
 	}, {
 		.bus_id = "ext1_tx",
 		.min_signal = 3,
 		.max_signal = 3,
 		.muxval = 2,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB2,
 	}, {
 		.bus_id = "ext2_rx",
 		.min_signal = 4,
 		.max_signal = 4,
 		.muxval = 2,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB2,
 	}, {
 		.bus_id = "ext2_tx",
 		.min_signal = 5,
 		.max_signal = 5,
 		.muxval = 2,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB2,
 	}, {
 		.bus_id = "ext3_rx",
 		.min_signal = 6,
 		.max_signal = 6,
 		.muxval = 2,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB2,
 	}, {
 		.bus_id = "ext3_tx",
 		.min_signal = 7,
 		.max_signal = 7,
 		.muxval = 2,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB2,
 	}, {
 		.bus_id = "ext4_rx",
 		.min_signal = 8,
 		.max_signal = 8,
 		.muxval = 2,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB2,
 	}, {
 		.bus_id = "ext4_tx",
 		.min_signal = 9,
 		.max_signal = 9,
 		.muxval = 2,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB2,
 	}, {
 		.bus_id = "ext5_rx",
 		.min_signal = 10,
 		.max_signal = 10,
 		.muxval = 2,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB2,
 	}, {
 		.bus_id = "ext5_tx",
 		.min_signal = 11,
 		.max_signal = 11,
 		.muxval = 2,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB2,
 	}, {
 		.bus_id = "ext6_rx",
 		.min_signal = 12,
 		.max_signal = 12,
 		.muxval = 2,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB2,
 	}, {
 		.bus_id = "ext6_tx",
 		.min_signal = 13,
 		.max_signal = 13,
 		.muxval = 2,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB2,
 	}, {
 		.bus_id = "ext7_rx",
 		.min_signal = 14,
 		.max_signal = 14,
 		.muxval = 2,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB2,
 	}, {
 		.bus_id = "ext7_tx",
 		.min_signal = 15,
 		.max_signal = 15,
 		.muxval = 2,
-		.cctl = 0,
 		.periph_buses = PL08X_AHB2,
 	},
 };
@@ -373,7 +325,8 @@ static struct pl08x_channel_data spear600_dma_info[] = {
 struct pl08x_platform_data pl080_plat_data = {
 	.memcpy_channel = {
 		.bus_id = "memcpy",
-		.cctl = (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \
+		.cctl_memcpy =
+			(PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \
 			PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \
 			PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \
 			PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \

drivers/dma/amba-pl08x.c

@@ -235,8 +235,6 @@ struct pl08x_dma_chan {
 	const char *name;
 	const struct pl08x_channel_data *cd;
 	struct dma_slave_config cfg;
-	u32 src_cctl;
-	u32 dst_cctl;
 	struct list_head pend_list;
 	struct pl08x_txd *at;
 	spinlock_t lock;
@@ -1235,30 +1233,15 @@ static int dma_set_runtime_config(struct dma_chan *chan,
 				  struct dma_slave_config *config)
 {
 	struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
-	struct pl08x_driver_data *pl08x = plchan->host;
-	u32 src_cctl, dst_cctl;
 
 	if (!plchan->slave)
 		return -EINVAL;
 
-	dst_cctl = pl08x_get_cctl(plchan, config->dst_addr_width,
-				  config->dst_maxburst);
-	if (dst_cctl == ~0 && config->direction == DMA_MEM_TO_DEV) {
-		dev_err(&pl08x->adev->dev,
-			"bad runtime_config: alien address width (M2D)\n");
+	/* Reject definitely invalid configurations */
+	if (config->src_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES ||
+	    config->dst_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES)
 		return -EINVAL;
-	}
 
-	src_cctl = pl08x_get_cctl(plchan, config->src_addr_width,
-				  config->src_maxburst);
-	if (src_cctl == ~0 && config->direction == DMA_DEV_TO_MEM) {
-		dev_err(&pl08x->adev->dev,
-			"bad runtime_config: alien address width (D2M)\n");
-		return -EINVAL;
-	}
-
-	plchan->dst_cctl = dst_cctl;
-	plchan->src_cctl = src_cctl;
 	plchan->cfg = *config;
 
 	return 0;
@@ -1407,7 +1390,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy(
 
 	/* Set platform data for m2m */
 	txd->ccfg |= PL080_FLOW_MEM2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT;
-	txd->cctl = pl08x->pd->memcpy_channel.cctl &
+	txd->cctl = pl08x->pd->memcpy_channel.cctl_memcpy &
 			~(PL080_CONTROL_DST_AHB2 | PL080_CONTROL_SRC_AHB2);
 
 	/* Both to be incremented or the code will break */
@@ -1434,10 +1417,11 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg(
 	struct pl08x_txd *txd;
 	struct pl08x_sg *dsg;
 	struct scatterlist *sg;
+	enum dma_slave_buswidth addr_width;
 	dma_addr_t slave_addr;
 	int ret, tmp;
 	u8 src_buses, dst_buses;
-	u32 cctl;
+	u32 maxburst, cctl;
 
 	dev_dbg(&pl08x->adev->dev, "%s prepare transaction of %d bytes from %s\n",
 			__func__, sg_dma_len(sgl), plchan->name);
@@ -1456,13 +1440,17 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg(
 	txd->direction = direction;
 
 	if (direction == DMA_MEM_TO_DEV) {
-		cctl = plchan->dst_cctl | PL080_CONTROL_SRC_INCR;
+		cctl = PL080_CONTROL_SRC_INCR;
 		slave_addr = plchan->cfg.dst_addr;
+		addr_width = plchan->cfg.dst_addr_width;
+		maxburst = plchan->cfg.dst_maxburst;
 		src_buses = pl08x->mem_buses;
 		dst_buses = plchan->cd->periph_buses;
 	} else if (direction == DMA_DEV_TO_MEM) {
-		cctl = plchan->src_cctl | PL080_CONTROL_DST_INCR;
+		cctl = PL080_CONTROL_DST_INCR;
 		slave_addr = plchan->cfg.src_addr;
+		addr_width = plchan->cfg.src_addr_width;
+		maxburst = plchan->cfg.src_maxburst;
 		src_buses = plchan->cd->periph_buses;
 		dst_buses = pl08x->mem_buses;
 	} else {
@@ -1472,6 +1460,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg(
 		return NULL;
 	}
 
+	cctl |= pl08x_get_cctl(plchan, addr_width, maxburst);
 	if (cctl == ~0) {
 		pl08x_free_txd(pl08x, txd);
 		dev_err(&pl08x->adev->dev,
@@ -1774,14 +1763,10 @@ static irqreturn_t pl08x_irq(int irq, void *dev)
 
 static void pl08x_dma_slave_init(struct pl08x_dma_chan *chan)
 {
-	u32 cctl = pl08x_cctl(chan->cd->cctl);
-
 	chan->slave = true;
 	chan->name = chan->cd->bus_id;
 	chan->cfg.src_addr = chan->cd->addr;
 	chan->cfg.dst_addr = chan->cd->addr;
-	chan->src_cctl = cctl;
-	chan->dst_cctl = cctl;
 }
 
 /*

include/linux/amba/pl08x.h

@@ -47,7 +47,8 @@ enum {
  * devices with static assignments
  * @muxval: a number usually used to poke into some mux regiser to
  * mux in the signal to this channel
- * @cctl_opt: default options for the channel control register
+ * @cctl_memcpy: options for the channel control register for memcpy
+ *  *** not used for slave channels ***
  * @addr: source/target address in physical memory for this DMA channel,
  * can be the address of a FIFO register for burst requests for example.
  * This can be left undefined if the PrimeCell API is used for configuring
@@ -62,7 +63,7 @@ struct pl08x_channel_data {
 	int min_signal;
 	int max_signal;
 	u32 muxval;
-	u32 cctl;
+	u32 cctl_memcpy;
 	dma_addr_t addr;
 	bool single;
 	u8 periph_buses;