rtc: add hym8563 rtc-driver

The Haoyu Microelectronics HYM8563 provides rtc and alarm functions as
well as a clock output of up to 32kHz.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Richard Weinberger <richard.weinberger@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/Kconfig

@@ -212,6 +212,17 @@ config RTC_DRV_DS3232
 	  This driver can also be built as a module.  If so, the module
 	  will be called rtc-ds3232.
 
+config RTC_DRV_HYM8563
+	tristate "Haoyu Microelectronics HYM8563"
+	depends on I2C && OF
+	help
+	  Say Y to enable support for the HYM8563 I2C RTC chip. Apart
+	  from the usual rtc functions it provides a clock output of
+	  up to 32kHz.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-hym8563.
+
 config RTC_DRV_LP8788
 	tristate "TI LP8788 RTC driver"
 	depends on MFD_LP8788

drivers/rtc/Makefile

@@ -55,6 +55,7 @@ obj-$(CONFIG_RTC_DRV_EP93XX)	+= rtc-ep93xx.o
 obj-$(CONFIG_RTC_DRV_FM3130)	+= rtc-fm3130.o
 obj-$(CONFIG_RTC_DRV_GENERIC)	+= rtc-generic.o
 obj-$(CONFIG_RTC_DRV_HID_SENSOR_TIME) += rtc-hid-sensor-time.o
+obj-$(CONFIG_RTC_DRV_HYM8563)	+= rtc-hym8563.o
 obj-$(CONFIG_RTC_DRV_IMXDI)	+= rtc-imxdi.o
 obj-$(CONFIG_RTC_DRV_ISL1208)	+= rtc-isl1208.o
 obj-$(CONFIG_RTC_DRV_ISL12022)	+= rtc-isl12022.o