Commit dcfbd31e authored by Shravan S's avatar Shravan S Committed by Hans de Goede

platform/x86: BIOS SAR driver for Intel M.2 Modem

Dynamic BIOS SAR driver exposing dynamic SAR information from BIOS

The Dynamic SAR (Specific Absorption Rate) driver uses ACPI DSM
(Device Specific Method) to communicate with BIOS and retrieve
dynamic SAR information and change notifications. The driver uses
sysfs to expose this data to userspace via read and notify.

Sysfs interface is documented in detail under:
Documentation/ABI/testing/sysfs-driver-intc_sar
Signed-off-by: default avatarShravan S <s.shravan@intel.com>
Link: https://lore.kernel.org/r/20210723211452.27995-2-s.shravan@intel.comReviewed-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
parent ef195e8a
What: /sys/bus/platform/devices/INTC1092:00/intc_reg
Date: August 2021
KernelVersion: 5.15
Contact: Shravan S <s.shravan@intel.com>,
An Sudhakar <sudhakar.an@intel.com>
Description:
Specific Absorption Rate (SAR) regulatory mode is typically
derived based on information like mcc (Mobile Country Code) and
mnc (Mobile Network Code) that is available for the currently
attached LTE network. A userspace application is required to set
the current SAR regulatory mode on the Dynamic SAR driver using
this sysfs node. Such an application can also read back using
this sysfs node, the currently configured regulatory mode value
from the Dynamic SAR driver.
Acceptable regulatory modes are:
== ====
0 FCC
1 CE
2 ISED
== ====
- The regulatory mode value has one of the above values.
- The default regulatory mode used in the driver is 0.
What: /sys/bus/platform/devices/INTC1092:00/intc_data
Date: August 2021
KernelVersion: 5.15
Contact: Shravan S <s.shravan@intel.com>,
An Sudhakar <sudhakar.an@intel.com>
Description:
This sysfs entry is used to retrieve Dynamic SAR information
emitted/maintained by a BIOS that supports Dynamic SAR.
The retrieved information is in the order given below:
- device_mode
- bandtable_index
- antennatable_index
- sartable_index
The above information is sent as integer values separated
by a single space. This information can then be pushed to a
WWAN modem that uses this to control the transmit signal
level using the Band/Antenna/SAR table index information.
These parameters are derived/decided by aggregating
device-mode like laptop/tablet/clamshell etc. and the
proximity-sensor data available to the embedded controller on
given host. The regulatory mode configured on Dynamic SAR
driver also influences these values.
The userspace applications can poll for changes to this file
using POLLPRI event on file-descriptor (fd) obtained by opening
this sysfs entry. Application can then read this information from
the sysfs node and consume the given information.
......@@ -9220,6 +9220,13 @@ L: platform-driver-x86@vger.kernel.org
S: Maintained
F: drivers/platform/x86/intel_atomisp2_led.c
INTEL BIOS SAR INT1092 DRIVER
M: Shravan S <s.shravan@intel.com>
M: Intel Corporation <linuxwwan@intel.com>
L: platform-driver-x86@vger.kernel.org
S: Maintained
F: drivers/platform/x86/intel/int1092/
INTEL BROXTON PMC DRIVER
M: Mika Westerberg <mika.westerberg@linux.intel.com>
M: Zha Qipeng <qipeng.zha@intel.com>
......
......@@ -16,6 +16,7 @@ menuconfig X86_PLATFORM_DRIVERS_INTEL
if X86_PLATFORM_DRIVERS_INTEL
source "drivers/platform/x86/intel/int1092/Kconfig"
source "drivers/platform/x86/intel/int33fe/Kconfig"
source "drivers/platform/x86/intel/int3472/Kconfig"
source "drivers/platform/x86/intel/pmt/Kconfig"
......
......@@ -4,6 +4,7 @@
# Intel x86 Platform-Specific Drivers
#
obj-$(CONFIG_INTEL_SAR_INT1092) += int1092/
obj-$(CONFIG_INTEL_CHT_INT33FE) += int33fe/
obj-$(CONFIG_INTEL_SKL_INT3472) += int3472/
obj-$(CONFIG_INTEL_PMT_CLASS) += pmt/
config INTEL_SAR_INT1092
tristate "Intel Specific Absorption Rate Driver"
depends on ACPI
help
This driver helps to limit the exposure of human body to RF frequency by
providing information to userspace application that will inform the Intel
M.2 modem to regulate the RF power based on SAR data obtained from the
sensors captured in the BIOS. ACPI interface exposes this data from the BIOS
to SAR driver. The front end application in userspace will interact with SAR
driver to obtain information like the device mode, Antenna index, baseband index,
SAR table index and use available communication like MBIM interface to enable
data communication to modem for RF power regulation. Enable this config when
given platform needs to support "Dynamic SAR" configuration for a modem available
on the platform.
obj-$(CONFIG_INTEL_SAR_INT1092) += intel_sar.o
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2021, Intel Corporation.
*/
#include <linux/acpi.h>
#include <linux/kobject.h>
#include <linux/platform_device.h>
#include <linux/sysfs.h>
#include "intel_sar.h"
/**
* get_int_value: Retrieve integer values from ACPI Object
* @obj: acpi_object pointer which has the integer value
* @out: output pointer will get integer value
*
* Function is used to retrieve integer value from acpi object.
*
* Return:
* * 0 on success
* * -EIO if there is an issue in acpi_object passed.
*/
static int get_int_value(union acpi_object *obj, int *out)
{
if (!obj || obj->type != ACPI_TYPE_INTEGER)
return -EIO;
*out = (int)obj->integer.value;
return 0;
}
/**
* update_sar_data: sar data is updated based on regulatory mode
* @context: pointer to driver context structure
*
* sar_data is updated based on regulatory value
* context->reg_value will never exceed MAX_REGULATORY
*/
static void update_sar_data(struct wwan_sar_context *context)
{
struct wwan_device_mode_configuration *config =
&context->config_data[context->reg_value];
if (config->device_mode_info &&
context->sar_data.device_mode < config->total_dev_mode) {
struct wwan_device_mode_info *dev_mode =
&config->device_mode_info[context->sar_data.device_mode];
context->sar_data.antennatable_index = dev_mode->antennatable_index;
context->sar_data.bandtable_index = dev_mode->bandtable_index;
context->sar_data.sartable_index = dev_mode->sartable_index;
}
}
/**
* parse_package: parse acpi package for retrieving SAR information
* @context: pointer to driver context structure
* @item : acpi_object pointer
*
* Given acpi_object is iterated to retrieve information for each device mode.
* If a given package corresponding to a specific device mode is faulty, it is
* skipped and the specific entry in context structure will have the default value
* of zero. Decoding of subsequent device modes is realized by having "continue"
* statements in the for loop on encountering error in parsing given device mode.
*
* Return:
* AE_OK if success
* AE_ERROR on error
*/
static acpi_status parse_package(struct wwan_sar_context *context, union acpi_object *item)
{
struct wwan_device_mode_configuration *data;
int value, itr, reg;
union acpi_object *num;
num = &item->package.elements[0];
if (get_int_value(num, &value) || value < 0 || value >= MAX_REGULATORY)
return AE_ERROR;
reg = value;
data = &context->config_data[reg];
if (data->total_dev_mode > MAX_DEV_MODES || data->total_dev_mode == 0 ||
item->package.count <= data->total_dev_mode)
return AE_ERROR;
data->device_mode_info = kmalloc_array(data->total_dev_mode,
sizeof(struct wwan_device_mode_info), GFP_KERNEL);
if (!data->device_mode_info)
return AE_ERROR;
for (itr = 0; itr < data->total_dev_mode; itr++) {
struct wwan_device_mode_info temp = { 0 };
num = &item->package.elements[itr + 1];
if (num->type != ACPI_TYPE_PACKAGE || num->package.count < TOTAL_DATA)
continue;
if (get_int_value(&num->package.elements[0], &temp.device_mode))
continue;
if (get_int_value(&num->package.elements[1], &temp.bandtable_index))
continue;
if (get_int_value(&num->package.elements[2], &temp.antennatable_index))
continue;
if (get_int_value(&num->package.elements[3], &temp.sartable_index))
continue;
data->device_mode_info[itr] = temp;
}
return AE_OK;
}
/**
* sar_get_device_mode: Extraction of information from BIOS via DSM calls
* @device: ACPI device for which to retrieve the data
*
* Retrieve the current device mode information from the BIOS.
*
* Return:
* AE_OK on success
* AE_ERROR on error
*/
static acpi_status sar_get_device_mode(struct platform_device *device)
{
struct wwan_sar_context *context = dev_get_drvdata(&device->dev);
acpi_status status = AE_OK;
union acpi_object *out;
u32 rev = 0;
int value;
out = acpi_evaluate_dsm(context->handle, &context->guid, rev,
COMMAND_ID_DEV_MODE, NULL);
if (get_int_value(out, &value)) {
dev_err(&device->dev, "DSM cmd:%d Failed to retrieve value\n", COMMAND_ID_DEV_MODE);
status = AE_ERROR;
goto dev_mode_error;
}
context->sar_data.device_mode = value;
update_sar_data(context);
sysfs_notify(&device->dev.kobj, NULL, SYSFS_DATANAME);
dev_mode_error:
ACPI_FREE(out);
return status;
}
static const struct acpi_device_id sar_device_ids[] = {
{ "INTC1092", 0},
{}
};
MODULE_DEVICE_TABLE(acpi, sar_device_ids);
static ssize_t intc_data_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct wwan_sar_context *context = dev_get_drvdata(dev);
return sysfs_emit(buf, "%d %d %d %d\n", context->sar_data.device_mode,
context->sar_data.bandtable_index,
context->sar_data.antennatable_index,
context->sar_data.sartable_index);
}
static DEVICE_ATTR_RO(intc_data);
static ssize_t intc_reg_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct wwan_sar_context *context = dev_get_drvdata(dev);
return sysfs_emit(buf, "%d\n", context->reg_value);
}
static ssize_t intc_reg_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct wwan_sar_context *context = dev_get_drvdata(dev);
unsigned int value;
int read;
if (!count)
return -EINVAL;
read = kstrtouint(buf, 10, &value);
if (read < 0)
return read;
if (value >= MAX_REGULATORY)
return -EOVERFLOW;
context->reg_value = value;
update_sar_data(context);
sysfs_notify(&dev->kobj, NULL, SYSFS_DATANAME);
return count;
}
static DEVICE_ATTR_RW(intc_reg);
static struct attribute *intcsar_attrs[] = {
&dev_attr_intc_data.attr,
&dev_attr_intc_reg.attr,
NULL
};
static struct attribute_group intcsar_group = {
.attrs = intcsar_attrs,
};
static void sar_notify(acpi_handle handle, u32 event, void *data)
{
struct platform_device *device = data;
if (event == SAR_EVENT) {
if (sar_get_device_mode(device) != AE_OK)
dev_err(&device->dev, "sar_get_device_mode error");
}
}
static void sar_get_data(int reg, struct wwan_sar_context *context)
{
union acpi_object *out, req;
u32 rev = 0;
req.type = ACPI_TYPE_INTEGER;
req.integer.value = reg;
out = acpi_evaluate_dsm(context->handle, &context->guid, rev,
COMMAND_ID_CONFIG_TABLE, &req);
if (!out)
return;
if (out->type == ACPI_TYPE_PACKAGE && out->package.count >= 3 &&
out->package.elements[0].type == ACPI_TYPE_INTEGER &&
out->package.elements[1].type == ACPI_TYPE_INTEGER &&
out->package.elements[2].type == ACPI_TYPE_PACKAGE &&
out->package.elements[2].package.count > 0) {
context->config_data[reg].version = out->package.elements[0].integer.value;
context->config_data[reg].total_dev_mode =
out->package.elements[1].integer.value;
if (context->config_data[reg].total_dev_mode <= 0 ||
context->config_data[reg].total_dev_mode > MAX_DEV_MODES) {
ACPI_FREE(out);
return;
}
parse_package(context, &out->package.elements[2]);
}
ACPI_FREE(out);
}
static int sar_probe(struct platform_device *device)
{
struct wwan_sar_context *context;
int reg;
int result;
context = kzalloc(sizeof(*context), GFP_KERNEL);
if (!context)
return -ENOMEM;
context->sar_device = device;
context->handle = ACPI_HANDLE(&device->dev);
dev_set_drvdata(&device->dev, context);
result = guid_parse(SAR_DSM_UUID, &context->guid);
if (result) {
dev_err(&device->dev, "SAR UUID parse error: %d\n", result);
goto r_free;
}
for (reg = 0; reg < MAX_REGULATORY; reg++)
sar_get_data(reg, context);
if (sar_get_device_mode(device) != AE_OK) {
dev_err(&device->dev, "Failed to get device mode\n");
result = -EIO;
goto r_free;
}
result = sysfs_create_group(&device->dev.kobj, &intcsar_group);
if (result) {
dev_err(&device->dev, "sysfs creation failed\n");
goto r_free;
}
if (acpi_install_notify_handler(ACPI_HANDLE(&device->dev), ACPI_DEVICE_NOTIFY,
sar_notify, (void *)device) != AE_OK) {
dev_err(&device->dev, "Failed acpi_install_notify_handler\n");
result = -EIO;
goto r_sys;
}
return 0;
r_sys:
sysfs_remove_group(&device->dev.kobj, &intcsar_group);
r_free:
kfree(context);
return result;
}
static int sar_remove(struct platform_device *device)
{
struct wwan_sar_context *context = dev_get_drvdata(&device->dev);
int reg;
acpi_remove_notify_handler(ACPI_HANDLE(&device->dev),
ACPI_DEVICE_NOTIFY, sar_notify);
sysfs_remove_group(&device->dev.kobj, &intcsar_group);
for (reg = 0; reg < MAX_REGULATORY; reg++)
kfree(context->config_data[reg].device_mode_info);
kfree(context);
return 0;
}
static struct platform_driver sar_driver = {
.probe = sar_probe,
.remove = sar_remove,
.driver = {
.name = DRVNAME,
.owner = THIS_MODULE,
.acpi_match_table = ACPI_PTR(sar_device_ids)
}
};
module_platform_driver(sar_driver);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("Platform device driver for INTEL MODEM BIOS SAR");
MODULE_AUTHOR("Shravan S <s.shravan@intel.com>");
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (c) 2021, Intel Corporation.
*/
#ifndef INTEL_SAR_H
#define INTEL_SAR_H
#define COMMAND_ID_DEV_MODE 1
#define COMMAND_ID_CONFIG_TABLE 2
#define DRVNAME "intc_sar"
#define MAX_DEV_MODES 50
#define MAX_REGULATORY 3
#define SAR_DSM_UUID "82737E72-3A33-4C45-A9C7-57C0411A5F13"
#define SAR_EVENT 0x80
#define SYSFS_DATANAME "intc_data"
#define TOTAL_DATA 4
/**
* Structure wwan_device_mode_info - device mode information
* Holds the data that needs to be passed to userspace.
* The data is updated from the BIOS sensor information.
* @device_mode: Specific mode of the device
* @bandtable_index: Index of RF band
* @antennatable_index: Index of antenna
* @sartable_index: Index of SAR
*/
struct wwan_device_mode_info {
int device_mode;
int bandtable_index;
int antennatable_index;
int sartable_index;
};
/**
* Structure wwan_device_mode_configuration - device configuration
* Holds the data that is configured and obtained on probe event.
* The data is updated from the BIOS sensor information.
* @version: Mode configuration version
* @total_dev_mode: Total number of device modes
* @device_mode_info: pointer to structure wwan_device_mode_info
*/
struct wwan_device_mode_configuration {
int version;
int total_dev_mode;
struct wwan_device_mode_info *device_mode_info;
};
/**
* Structure wwan_supported_info - userspace datastore
* Holds the data that is obtained from userspace
* The data is updated from the userspace and send value back in the
* structure format that is mentioned here.
* @reg_mode_needed: regulatory mode set by user for tests
* @bios_table_revision: Version of SAR table
* @num_supported_modes: Total supported modes based on reg_mode
*/
struct wwan_supported_info {
int reg_mode_needed;
int bios_table_revision;
int num_supported_modes;
};
/**
* Structure wwan_sar_context - context of SAR
* Holds the complete context as long as the driver is in existence
* The context holds instance of the data used for different cases.
* @guid: Group id
* @handle: store acpi handle
* @reg_value: regulatory value
* Regulatory 0: FCC, 1: CE, 2: ISED
* @sar_device: platform_device type
* @sar_kobject: kobject for sysfs
* @supported_data: wwan_supported_info struct
* @sar_data: wwan_device_mode_info struct
* @config_data: wwan_device_mode_configuration array struct
*/
struct wwan_sar_context {
guid_t guid;
acpi_handle handle;
int reg_value;
struct platform_device *sar_device;
struct wwan_supported_info supported_data;
struct wwan_device_mode_info sar_data;
struct wwan_device_mode_configuration config_data[MAX_REGULATORY];
};
#endif /* INTEL_SAR_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment