ARM: dts: qcom: add additional DT labels in qcom-ipq8064.dtsi

This adds some additional DT labels which are handy when referring
to the nodes in derived DTS(I) files. It will also make the
definitions more consistent, e.g. by adding gsbi2_serial and
gsbi5_serial where we previously "only" had gsbi4_serial defined.

While at it, add missing spaces after some DT labels and remove one
useless empty line.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Link: https://lore.kernel.org/r/20200902165159.7733-1-freifunk@adrianschmutzler.deSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arch/arm/boot/dts/qcom-ipq8064.dtsi

@@ -20,7 +20,7 @@ cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			compatible = "qcom,krait";
 			enable-method = "qcom,kpss-acc-v1";
 			device_type = "cpu";
@@ -30,7 +30,7 @@ cpu@0 {
 			qcom,saw = <&saw0>;
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			compatible = "qcom,krait";
 			enable-method = "qcom,kpss-acc-v1";
 			device_type = "cpu";
@@ -67,7 +67,7 @@ nss@40000000 {
 			no-map;
 		};
 
-		smem@41000000 {
+		smem: smem@41000000 {
 			reg = <0x41000000 0x200000>;
 			no-map;
 		};
@@ -251,7 +251,7 @@ gsbi2: gsbi@12480000 {
 
 			syscon-tcsr = <&tcsr>;
 
-			serial@12490000 {
+			gsbi2_serial: serial@12490000 {
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x12490000 0x1000>,
 				      <0x12480000 0x1000>;
@@ -273,7 +273,6 @@ i2c@124a0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 			};
-
 		};
 
 		gsbi4: gsbi@16300000 {
@@ -326,7 +325,7 @@ gsbi5: gsbi@1a200000 {
 
 			syscon-tcsr = <&tcsr>;
 
-			serial@1a240000 {
+			gsbi5_serial: serial@1a240000 {
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x1a240000 0x1000>,
 				      <0x1a200000 0x1000>;
@@ -404,7 +403,7 @@ sata_phy: sata-phy@1b400000 {
 			status = "disabled";
 		};
 
-		sata@29000000 {
+		sata: sata@29000000 {
 			compatible = "qcom,ipq806x-ahci", "generic-ahci";
 			reg = <0x29000000 0x180>;
 
@@ -727,7 +726,7 @@ vsdcc_fixed: vsdcc-regulator {
 			regulator-always-on;
 		};
 
-		sdcc1bam:dma@12402000 {
+		sdcc1bam: dma@12402000 {
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x12402000 0x8000>;
 			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
@@ -737,7 +736,7 @@ sdcc1bam:dma@12402000 {
 			qcom,ee = <0>;
 		};
 
-		sdcc3bam:dma@12182000 {
+		sdcc3bam: dma@12182000 {
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x12182000 0x8000>;
 			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
@@ -747,13 +746,13 @@ sdcc3bam:dma@12182000 {
 			qcom,ee = <0>;
 		};
 
-		amba {
+		amba: amba {
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
 
-			sdcc@12400000 {
+			sdcc1: sdcc@12400000 {
 				status          = "disabled";
 				compatible      = "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
@@ -773,7 +772,7 @@ sdcc@12400000 {
 				dma-names = "tx", "rx";
 			};
 
-			sdcc@12180000 {
+			sdcc3: sdcc@12180000 {
 				compatible      = "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
 				status          = "disabled";