Commit ddd8d94c authored by Tony Lindgren's avatar Tony Lindgren Committed by Bartosz Golaszewski

gpio: omap: Save and restore sysconfig

As we are using cpu_pm to save and restore context, we must also save and
restore the GPIO sysconfig register. This is needed because we are not
calling PM runtime functions at all with cpu_pm.

We need to save the sysconfig on idle as it's value can get reconfigured by
PM runtime and can be different from the init time value. Device specific
flags like "ti,no-idle-on-init" can affect the init value.

Fixes: b764a586 ("gpio: omap: Remove custom PM calls and use cpu_pm instead")
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Adam Ford <aford173@gmail.com>
Cc: Andreas Kemnade <andreas@kemnade.info>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
Acked-by: default avatarGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: default avatarBartosz Golaszewski <bgolaszewski@baylibre.com>
parent 23cf00dd
......@@ -29,6 +29,7 @@
#define OMAP4_GPIO_DEBOUNCINGTIME_MASK 0xFF
struct gpio_regs {
u32 sysconfig;
u32 irqenable1;
u32 irqenable2;
u32 wake_en;
......@@ -1069,6 +1070,7 @@ static void omap_gpio_init_context(struct gpio_bank *p)
const struct omap_gpio_reg_offs *regs = p->regs;
void __iomem *base = p->base;
p->context.sysconfig = readl_relaxed(base + regs->sysconfig);
p->context.ctrl = readl_relaxed(base + regs->ctrl);
p->context.oe = readl_relaxed(base + regs->direction);
p->context.wake_en = readl_relaxed(base + regs->wkup_en);
......@@ -1088,6 +1090,7 @@ static void omap_gpio_restore_context(struct gpio_bank *bank)
const struct omap_gpio_reg_offs *regs = bank->regs;
void __iomem *base = bank->base;
writel_relaxed(bank->context.sysconfig, base + regs->sysconfig);
writel_relaxed(bank->context.wake_en, base + regs->wkup_en);
writel_relaxed(bank->context.ctrl, base + regs->ctrl);
writel_relaxed(bank->context.leveldetect0, base + regs->leveldetect0);
......@@ -1115,6 +1118,10 @@ static void omap_gpio_idle(struct gpio_bank *bank, bool may_lose_context)
bank->saved_datain = readl_relaxed(base + bank->regs->datain);
/* Save syconfig, it's runtime value can be different from init value */
if (bank->loses_context)
bank->context.sysconfig = readl_relaxed(base + bank->regs->sysconfig);
if (!bank->enabled_non_wakeup_gpios)
goto update_gpio_context_count;
......@@ -1279,6 +1286,7 @@ static int gpio_omap_cpu_notifier(struct notifier_block *nb,
static const struct omap_gpio_reg_offs omap2_gpio_regs = {
.revision = OMAP24XX_GPIO_REVISION,
.sysconfig = OMAP24XX_GPIO_SYSCONFIG,
.direction = OMAP24XX_GPIO_OE,
.datain = OMAP24XX_GPIO_DATAIN,
.dataout = OMAP24XX_GPIO_DATAOUT,
......@@ -1302,6 +1310,7 @@ static const struct omap_gpio_reg_offs omap2_gpio_regs = {
static const struct omap_gpio_reg_offs omap4_gpio_regs = {
.revision = OMAP4_GPIO_REVISION,
.sysconfig = OMAP4_GPIO_SYSCONFIG,
.direction = OMAP4_GPIO_OE,
.datain = OMAP4_GPIO_DATAIN,
.dataout = OMAP4_GPIO_DATAOUT,
......
......@@ -85,6 +85,7 @@
* omap2+ specific GPIO registers
*/
#define OMAP24XX_GPIO_REVISION 0x0000
#define OMAP24XX_GPIO_SYSCONFIG 0x0010
#define OMAP24XX_GPIO_IRQSTATUS1 0x0018
#define OMAP24XX_GPIO_IRQSTATUS2 0x0028
#define OMAP24XX_GPIO_IRQENABLE2 0x002c
......@@ -108,6 +109,7 @@
#define OMAP24XX_GPIO_SETDATAOUT 0x0094
#define OMAP4_GPIO_REVISION 0x0000
#define OMAP4_GPIO_SYSCONFIG 0x0010
#define OMAP4_GPIO_EOI 0x0020
#define OMAP4_GPIO_IRQSTATUSRAW0 0x0024
#define OMAP4_GPIO_IRQSTATUSRAW1 0x0028
......@@ -148,6 +150,7 @@
#ifndef __ASSEMBLER__
struct omap_gpio_reg_offs {
u16 revision;
u16 sysconfig;
u16 direction;
u16 datain;
u16 dataout;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment