Merge tag 'samsung-pinctrl-4.18-2' of...

Merge tag 'samsung-pinctrl-4.18-2' of https://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel

Samsung pinctrl drivers changes for v4.18

1. Driver expects specific order of GPIO interrupt banks.  For S5Pv220
   and Exynos5410 this order was not preserved so fix and document it.
2. Remove support for Exynos5440 (tree-wide, support is dropped because
   there are no real users of this platform, it also did not get testing
   since long time).
3. Fix lost state of GPF1..5 pins on Exynos5433 during system suspend.

drivers/pinctrl/samsung/Kconfig

@@ -8,26 +8,20 @@ config PINCTRL_SAMSUNG
 	select PINCONF
 
 config PINCTRL_EXYNOS
-	bool "Pinctrl driver data for Samsung EXYNOS SoCs other than 5440"
+	bool "Pinctrl driver data for Samsung EXYNOS SoCs"
 	depends on OF && GPIOLIB && (ARCH_EXYNOS || ARCH_S5PV210)
 	select PINCTRL_SAMSUNG
 	select PINCTRL_EXYNOS_ARM if ARM && (ARCH_EXYNOS || ARCH_S5PV210)
 	select PINCTRL_EXYNOS_ARM64 if ARM64 && ARCH_EXYNOS
 
 config PINCTRL_EXYNOS_ARM
-	bool "ARMv7-specific pinctrl driver data for Exynos (except Exynos5440)" if COMPILE_TEST
+	bool "ARMv7-specific pinctrl driver data for Exynos" if COMPILE_TEST
 	depends on PINCTRL_EXYNOS
 
 config PINCTRL_EXYNOS_ARM64
 	bool "ARMv8-specific pinctrl driver data for Exynos" if COMPILE_TEST
 	depends on PINCTRL_EXYNOS
 
-config PINCTRL_EXYNOS5440
-	bool "Samsung EXYNOS5440 SoC pinctrl driver"
-	depends on SOC_EXYNOS5440
-	select PINMUX
-	select PINCONF
-
 config PINCTRL_S3C24XX
 	bool "Samsung S3C24XX SoC pinctrl driver"
 	depends on ARCH_S3C24XX && OF

drivers/pinctrl/samsung/Makefile

@@ -5,6 +5,5 @@ obj-$(CONFIG_PINCTRL_SAMSUNG)	+= pinctrl-samsung.o
 obj-$(CONFIG_PINCTRL_EXYNOS)	+= pinctrl-exynos.o
 obj-$(CONFIG_PINCTRL_EXYNOS_ARM)	+= pinctrl-exynos-arm.o
 obj-$(CONFIG_PINCTRL_EXYNOS_ARM64)	+= pinctrl-exynos-arm64.o
-obj-$(CONFIG_PINCTRL_EXYNOS5440)	+= pinctrl-exynos5440.o
 obj-$(CONFIG_PINCTRL_S3C24XX)	+= pinctrl-s3c24xx.o
 obj-$(CONFIG_PINCTRL_S3C64XX)	+= pinctrl-s3c64xx.o

drivers/pinctrl/samsung/pinctrl-exynos-arm64.c

@@ -45,6 +45,7 @@ static atomic_t exynos_shared_retention_refcnt;
 
 /* pin banks of exynos5433 pin-controller - ALIVE */
 static const struct samsung_pin_bank_data exynos5433_pin_banks0[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS5433_PIN_BANK_EINTW(8, 0x000, "gpa0", 0x00),
 	EXYNOS5433_PIN_BANK_EINTW(8, 0x020, "gpa1", 0x04),
 	EXYNOS5433_PIN_BANK_EINTW(8, 0x040, "gpa2", 0x08),
@@ -58,27 +59,32 @@ static const struct samsung_pin_bank_data exynos5433_pin_banks0[] __initconst =
 
 /* pin banks of exynos5433 pin-controller - AUD */
 static const struct samsung_pin_bank_data exynos5433_pin_banks1[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS5433_PIN_BANK_EINTG(7, 0x000, "gpz0", 0x00),
 	EXYNOS5433_PIN_BANK_EINTG(4, 0x020, "gpz1", 0x04),
 };
 
 /* pin banks of exynos5433 pin-controller - CPIF */
 static const struct samsung_pin_bank_data exynos5433_pin_banks2[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS5433_PIN_BANK_EINTG(2, 0x000, "gpv6", 0x00),
 };
 
 /* pin banks of exynos5433 pin-controller - eSE */
 static const struct samsung_pin_bank_data exynos5433_pin_banks3[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS5433_PIN_BANK_EINTG(3, 0x000, "gpj2", 0x00),
 };
 
 /* pin banks of exynos5433 pin-controller - FINGER */
 static const struct samsung_pin_bank_data exynos5433_pin_banks4[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS5433_PIN_BANK_EINTG(4, 0x000, "gpd5", 0x00),
 };
 
 /* pin banks of exynos5433 pin-controller - FSYS */
 static const struct samsung_pin_bank_data exynos5433_pin_banks5[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS5433_PIN_BANK_EINTG(6, 0x000, "gph1", 0x00),
 	EXYNOS5433_PIN_BANK_EINTG(7, 0x020, "gpr4", 0x04),
 	EXYNOS5433_PIN_BANK_EINTG(5, 0x040, "gpr0", 0x08),
@@ -89,16 +95,19 @@ static const struct samsung_pin_bank_data exynos5433_pin_banks5[] __initconst =
 
 /* pin banks of exynos5433 pin-controller - IMEM */
 static const struct samsung_pin_bank_data exynos5433_pin_banks6[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS5433_PIN_BANK_EINTG(8, 0x000, "gpf0", 0x00),
 };
 
 /* pin banks of exynos5433 pin-controller - NFC */
 static const struct samsung_pin_bank_data exynos5433_pin_banks7[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS5433_PIN_BANK_EINTG(3, 0x000, "gpj0", 0x00),
 };
 
 /* pin banks of exynos5433 pin-controller - PERIC */
 static const struct samsung_pin_bank_data exynos5433_pin_banks8[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS5433_PIN_BANK_EINTG(6, 0x000, "gpv7", 0x00),
 	EXYNOS5433_PIN_BANK_EINTG(5, 0x020, "gpb0", 0x04),
 	EXYNOS5433_PIN_BANK_EINTG(8, 0x040, "gpc0", 0x08),
@@ -120,6 +129,7 @@ static const struct samsung_pin_bank_data exynos5433_pin_banks8[] __initconst =
 
 /* pin banks of exynos5433 pin-controller - TOUCH */
 static const struct samsung_pin_bank_data exynos5433_pin_banks9[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS5433_PIN_BANK_EINTG(3, 0x000, "gpj1", 0x00),
 };
 
@@ -267,6 +277,7 @@ const struct samsung_pinctrl_of_match_data exynos5433_of_data __initconst = {
 
 /* pin banks of exynos7 pin-controller - ALIVE */
 static const struct samsung_pin_bank_data exynos7_pin_banks0[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTW(8, 0x000, "gpa0", 0x00),
 	EXYNOS_PIN_BANK_EINTW(8, 0x020, "gpa1", 0x04),
 	EXYNOS_PIN_BANK_EINTW(8, 0x040, "gpa2", 0x08),
@@ -275,6 +286,7 @@ static const struct samsung_pin_bank_data exynos7_pin_banks0[] __initconst = {
 
 /* pin banks of exynos7 pin-controller - BUS0 */
 static const struct samsung_pin_bank_data exynos7_pin_banks1[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTG(5, 0x000, "gpb0", 0x00),
 	EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpc0", 0x04),
 	EXYNOS_PIN_BANK_EINTG(2, 0x040, "gpc1", 0x08),
@@ -294,31 +306,37 @@ static const struct samsung_pin_bank_data exynos7_pin_banks1[] __initconst = {
 
 /* pin banks of exynos7 pin-controller - NFC */
 static const struct samsung_pin_bank_data exynos7_pin_banks2[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTG(3, 0x000, "gpj0", 0x00),
 };
 
 /* pin banks of exynos7 pin-controller - TOUCH */
 static const struct samsung_pin_bank_data exynos7_pin_banks3[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTG(3, 0x000, "gpj1", 0x00),
 };
 
 /* pin banks of exynos7 pin-controller - FF */
 static const struct samsung_pin_bank_data exynos7_pin_banks4[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTG(4, 0x000, "gpg4", 0x00),
 };
 
 /* pin banks of exynos7 pin-controller - ESE */
 static const struct samsung_pin_bank_data exynos7_pin_banks5[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTG(5, 0x000, "gpv7", 0x00),
 };
 
 /* pin banks of exynos7 pin-controller - FSYS0 */
 static const struct samsung_pin_bank_data exynos7_pin_banks6[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpr4", 0x00),
 };
 
 /* pin banks of exynos7 pin-controller - FSYS1 */
 static const struct samsung_pin_bank_data exynos7_pin_banks7[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTG(4, 0x000, "gpr0", 0x00),
 	EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpr1", 0x04),
 	EXYNOS_PIN_BANK_EINTG(5, 0x040, "gpr2", 0x08),
@@ -327,6 +345,7 @@ static const struct samsung_pin_bank_data exynos7_pin_banks7[] __initconst = {
 
 /* pin banks of exynos7 pin-controller - BUS1 */
 static const struct samsung_pin_bank_data exynos7_pin_banks8[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpf0", 0x00),
 	EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpf1", 0x04),
 	EXYNOS_PIN_BANK_EINTG(4, 0x060, "gpf2", 0x08),
@@ -340,6 +359,7 @@ static const struct samsung_pin_bank_data exynos7_pin_banks8[] __initconst = {
 };
 
 static const struct samsung_pin_bank_data exynos7_pin_banks9[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
 	EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpz0", 0x00),
 	EXYNOS_PIN_BANK_EINTG(4, 0x020, "gpz1", 0x04),
 };

drivers/pinctrl/samsung/pinctrl-exynos.h

@@ -99,7 +99,7 @@
 
 #define EXYNOS5433_PIN_BANK_EINTW_EXT(pins, reg, id, offs, pctl_idx) \
 	{							\
-		.type           = &exynos5433_bank_type_alive,	\
+		.type           = &exynos5433_bank_type_off,	\
 		.pctl_offset    = reg,				\
 		.nr_pins        = pins,				\
 		.eint_type      = EINT_TYPE_WKUP,		\