Merge tag 'omapdss-for-3.10' of git://gitorious.org/linux-omap-dss2/linux into drm-next

Omapdss patches for 3.10 merge window

The biggest changes are:

* DSI video mode: automatic clock and timing calculation
* Lots of platform data related panel driver cleanups, to prepare for DT

* tag 'omapdss-for-3.10' of git://gitorious.org/linux-omap-dss2/linux: (69 commits)
  drm/omap: add statics to a few structs
  drm/omap: Fix and improve crtc and overlay manager correlation
  drm/omap: Take a fb reference in omap_plane_update()
  drm/omap: Make fixed resolution panels work
  drm/omap: fix modeset_init if a panel doesn't satisfy omapdrm requirements
  OMAPDSS: DPI: widen the pck search when using dss fck
  OMAPDSS: fix dss_fck clock rate rounding
  omapdss: use devm_clk_get()
  OMAPDSS: nec-nl8048 panel: Use dev_pm_ops
  OMAPDSS: DISPC: Revert to older DISPC Smart Standby mechanism for OMAP5
  OMAPDSS: DISPC: Configure doublestride for NV12 when using 2D Tiler buffers
  omapdss: Features: Fix some parameter ranges
  omapdss: DISPC: add max pixel clock limits for LCD and TV managers
  OMAPDSS: DSI: Use devm_clk_get()
  drivers: video: omap2: dss: Use PTR_RET function
  OMAPDSS: VENC: remove platform_enable/disable calls
  OMAPDSS: n8x0 panel: remove use of platform_enable/disable
  OMAPDSS: n8x0 panel: handle gpio data in panel driver
  OMAPDSS: picodlp panel: remove platform_enable/disable callbacks
  OMAPDSS: picodlp panel: handle gpio data in panel driver
  ...

arch/arm/mach-omap2/board-2430sdp.c

@@ -38,7 +38,7 @@
 #include "gpmc-smc91x.h"
 
 #include <video/omapdss.h>
-#include <video/omap-panel-generic-dpi.h>
+#include <video/omap-panel-data.h>
 
 #include "mux.h"
 #include "hsmmc.h"

arch/arm/mach-omap2/board-3430sdp.c

@@ -35,7 +35,7 @@
 #include "common.h"
 #include <linux/omap-dma.h>
 #include <video/omapdss.h>
-#include <video/omap-panel-tfp410.h>
+#include <video/omap-panel-data.h>
 
 #include "gpmc.h"
 #include "gpmc-smc91x.h"

arch/arm/mach-omap2/board-am3517evm.c

@@ -35,8 +35,7 @@
 
 #include "common.h"
 #include <video/omapdss.h>
-#include <video/omap-panel-generic-dpi.h>
-#include <video/omap-panel-tfp410.h>
+#include <video/omap-panel-data.h>
 
 #include "am35xx-emac.h"
 #include "mux.h"

arch/arm/mach-omap2/board-cm-t35.c

@@ -41,8 +41,7 @@
 
 #include <linux/platform_data/mtd-nand-omap2.h>
 #include <video/omapdss.h>
-#include <video/omap-panel-generic-dpi.h>
-#include <video/omap-panel-tfp410.h>
+#include <video/omap-panel-data.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 
 #include "common.h"

arch/arm/mach-omap2/board-devkit8000.c

@@ -43,8 +43,7 @@
 #include "gpmc.h"
 #include <linux/platform_data/mtd-nand-omap2.h>
 #include <video/omapdss.h>
-#include <video/omap-panel-generic-dpi.h>
-#include <video/omap-panel-tfp410.h>
+#include <video/omap-panel-data.h>
 
 #include <linux/platform_data/spi-omap2-mcspi.h>
 #include <linux/input/matrix_keypad.h>

arch/arm/mach-omap2/board-h4.c

@@ -34,7 +34,7 @@
 #include <asm/mach/map.h>
 
 #include <video/omapdss.h>
-#include <video/omap-panel-generic-dpi.h>
+#include <video/omap-panel-data.h>
 
 #include "common.h"
 #include "mux.h"

arch/arm/mach-omap2/board-igep0020.c

@@ -31,7 +31,7 @@
 #include <asm/mach/arch.h>
 
 #include <video/omapdss.h>
-#include <video/omap-panel-tfp410.h>
+#include <video/omap-panel-data.h>
 #include <linux/platform_data/mtd-onenand-omap2.h>
 
 #include "common.h"

arch/arm/mach-omap2/board-ldp.c

@@ -41,7 +41,7 @@
 #include "gpmc-smsc911x.h"
 
 #include <video/omapdss.h>
-#include <video/omap-panel-generic-dpi.h>
+#include <video/omap-panel-data.h>
 
 #include "board-flash.h"
 #include "mux.h"

arch/arm/mach-omap2/board-omap3beagle.c

@@ -43,7 +43,7 @@
 #include <asm/mach/flash.h>
 
 #include <video/omapdss.h>
-#include <video/omap-panel-tfp410.h>
+#include <video/omap-panel-data.h>
 #include <linux/platform_data/mtd-nand-omap2.h>
 
 #include "common.h"

arch/arm/mach-omap2/board-omap3evm.c

@@ -51,7 +51,7 @@
 #include "common.h"
 #include <linux/platform_data/spi-omap2-mcspi.h>
 #include <video/omapdss.h>
-#include <video/omap-panel-tfp410.h>
+#include <video/omap-panel-data.h>
 
 #include "soc.h"
 #include "mux.h"

arch/arm/mach-omap2/board-omap3stalker.c

@@ -44,8 +44,7 @@
 #include "gpmc.h"
 #include <linux/platform_data/mtd-nand-omap2.h>
 #include <video/omapdss.h>
-#include <video/omap-panel-generic-dpi.h>
-#include <video/omap-panel-tfp410.h>
+#include <video/omap-panel-data.h>
 
 #include <linux/platform_data/spi-omap2-mcspi.h>
 

arch/arm/mach-omap2/board-overo.c

@@ -47,8 +47,7 @@
 #include <asm/mach/map.h>
 
 #include <video/omapdss.h>
-#include <video/omap-panel-generic-dpi.h>
-#include <video/omap-panel-tfp410.h>
+#include <video/omap-panel-data.h>
 
 #include "common.h"
 #include "mux.h"

arch/arm/mach-omap2/dss-common.c

@@ -27,9 +27,7 @@
 #include <linux/gpio.h>
 
 #include <video/omapdss.h>
-#include <video/omap-panel-tfp410.h>
-#include <video/omap-panel-nokia-dsi.h>
-#include <video/omap-panel-picodlp.h>
+#include <video/omap-panel-data.h>
 
 #include "soc.h"
 #include "dss-common.h"

drivers/gpu/drm/omapdrm/omap_connector.c

@@ -110,6 +110,11 @@ static enum drm_connector_status omap_connector_detect(
 			ret = connector_status_connected;
 		else
 			ret = connector_status_disconnected;
+	} else if (dssdev->type == OMAP_DISPLAY_TYPE_DPI ||
+			dssdev->type == OMAP_DISPLAY_TYPE_DBI ||
+			dssdev->type == OMAP_DISPLAY_TYPE_SDI ||
+			dssdev->type == OMAP_DISPLAY_TYPE_DSI) {
+		ret = connector_status_connected;
 	} else {
 		ret = connector_status_unknown;
 	}
@@ -189,12 +194,30 @@ static int omap_connector_mode_valid(struct drm_connector *connector,
 	struct omap_video_timings timings = {0};
 	struct drm_device *dev = connector->dev;
 	struct drm_display_mode *new_mode;
-	int ret = MODE_BAD;
+	int r, ret = MODE_BAD;
 
 	copy_timings_drm_to_omap(&timings, mode);
 	mode->vrefresh = drm_mode_vrefresh(mode);
 
-	if (!dssdrv->check_timings(dssdev, &timings)) {
+	/*
+	 * if the panel driver doesn't have a check_timings, it's most likely
+	 * a fixed resolution panel, check if the timings match with the
+	 * panel's timings
+	 */
+	if (dssdrv->check_timings) {
+		r = dssdrv->check_timings(dssdev, &timings);
+	} else {
+		struct omap_video_timings t = {0};
+
+		dssdrv->get_timings(dssdev, &t);
+
+		if (memcmp(&timings, &t, sizeof(struct omap_video_timings)))
+			r = -EINVAL;
+		else
+			r = 0;
+	}
+
+	if (!r) {
 		/* check if vrefresh is still valid */
 		new_mode = drm_mode_duplicate(dev, mode);
 		new_mode->clock = timings.pixel_clock;

drivers/gpu/drm/omapdrm/omap_crtc.c

@@ -74,6 +74,13 @@ struct omap_crtc {
 	struct work_struct page_flip_work;
 };
 
+uint32_t pipe2vbl(struct drm_crtc *crtc)
+{
+	struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+
+	return dispc_mgr_get_vsync_irq(omap_crtc->channel);
+}
+
 /*
  * Manager-ops, callbacks from output when they need to configure
  * the upstream part of the video pipe.
@@ -613,7 +620,13 @@ struct drm_crtc *omap_crtc_init(struct drm_device *dev,
 	omap_crtc->apply.pre_apply  = omap_crtc_pre_apply;
 	omap_crtc->apply.post_apply = omap_crtc_post_apply;
 
-	omap_crtc->apply_irq.irqmask = pipe2vbl(id);
+	omap_crtc->channel = channel;
+	omap_crtc->plane = plane;
+	omap_crtc->plane->crtc = crtc;
+	omap_crtc->name = channel_names[channel];
+	omap_crtc->pipe = id;
+
+	omap_crtc->apply_irq.irqmask = pipe2vbl(crtc);
 	omap_crtc->apply_irq.irq = omap_crtc_apply_irq;
 
 	omap_crtc->error_irq.irqmask =
@@ -621,12 +634,6 @@ struct drm_crtc *omap_crtc_init(struct drm_device *dev,
 	omap_crtc->error_irq.irq = omap_crtc_error_irq;
 	omap_irq_register(dev, &omap_crtc->error_irq);
 
-	omap_crtc->channel = channel;
-	omap_crtc->plane = plane;
-	omap_crtc->plane->crtc = crtc;
-	omap_crtc->name = channel_names[channel];
-	omap_crtc->pipe = id;
-
 	/* temporary: */
 	omap_crtc->mgr.id = channel;
 

drivers/gpu/drm/omapdrm/omap_drv.c

@@ -74,54 +74,53 @@ static int get_connector_type(struct omap_dss_device *dssdev)
 	}
 }
 
+static bool channel_used(struct drm_device *dev, enum omap_channel channel)
+{
+	struct omap_drm_private *priv = dev->dev_private;
+	int i;
+
+	for (i = 0; i < priv->num_crtcs; i++) {
+		struct drm_crtc *crtc = priv->crtcs[i];
+
+		if (omap_crtc_channel(crtc) == channel)
+			return true;
+	}
+
+	return false;
+}
+
 static int omap_modeset_init(struct drm_device *dev)
 {
 	struct omap_drm_private *priv = dev->dev_private;
 	struct omap_dss_device *dssdev = NULL;
 	int num_ovls = dss_feat_get_num_ovls();
-	int id;
+	int num_mgrs = dss_feat_get_num_mgrs();
+	int num_crtcs;
+	int i, id = 0;
 
 	drm_mode_config_init(dev);
 
 	omap_drm_irq_install(dev);
 
 	/*
-	 * Create private planes and CRTCs for the last NUM_CRTCs overlay
-	 * plus manager:
+	 * We usually don't want to create a CRTC for each manager, at least
+	 * not until we have a way to expose private planes to userspace.
+	 * Otherwise there would not be enough video pipes left for drm planes.
+	 * We use the num_crtc argument to limit the number of crtcs we create.
 	 */
-	for (id = 0; id < min(num_crtc, num_ovls); id++) {
-		struct drm_plane *plane;
-		struct drm_crtc *crtc;
-
-		plane = omap_plane_init(dev, id, true);
-		crtc = omap_crtc_init(dev, plane, pipe2chan(id), id);
+	num_crtcs = min3(num_crtc, num_mgrs, num_ovls);
 
-		BUG_ON(priv->num_crtcs >= ARRAY_SIZE(priv->crtcs));
-		priv->crtcs[id] = crtc;
-		priv->num_crtcs++;
-
-		priv->planes[id] = plane;
-		priv->num_planes++;
-	}
-
-	/*
-	 * Create normal planes for the remaining overlays:
-	 */
-	for (; id < num_ovls; id++) {
-		struct drm_plane *plane = omap_plane_init(dev, id, false);
-
-		BUG_ON(priv->num_planes >= ARRAY_SIZE(priv->planes));
-		priv->planes[priv->num_planes++] = plane;
-	}
+	dssdev = NULL;
 
 	for_each_dss_dev(dssdev) {
 		struct drm_connector *connector;
 		struct drm_encoder *encoder;
+		enum omap_channel channel;
 
 		if (!dssdev->driver) {
 			dev_warn(dev->dev, "%s has no driver.. skipping it\n",
 					dssdev->name);
-			return 0;
+			continue;
 		}
 
 		if (!(dssdev->driver->get_timings ||
@@ -129,7 +128,7 @@ static int omap_modeset_init(struct drm_device *dev)
 			dev_warn(dev->dev, "%s driver does not support "
 				"get_timings or read_edid.. skipping it!\n",
 				dssdev->name);
-			return 0;
+			continue;
 		}
 
 		encoder = omap_encoder_init(dev, dssdev);
@@ -157,16 +156,118 @@ static int omap_modeset_init(struct drm_device *dev)
 
 		drm_mode_connector_attach_encoder(connector, encoder);
 
+		/*
+		 * if we have reached the limit of the crtcs we are allowed to
+		 * create, let's not try to look for a crtc for this
+		 * panel/encoder and onwards, we will, of course, populate the
+		 * the possible_crtcs field for all the encoders with the final
+		 * set of crtcs we create
+		 */
+		if (id == num_crtcs)
+			continue;
+
+		/*
+		 * get the recommended DISPC channel for this encoder. For now,
+		 * we only try to get create a crtc out of the recommended, the
+		 * other possible channels to which the encoder can connect are
+		 * not considered.
+		 */
+		channel = dssdev->output->dispc_channel;
+
+		/*
+		 * if this channel hasn't already been taken by a previously
+		 * allocated crtc, we create a new crtc for it
+		 */
+		if (!channel_used(dev, channel)) {
+			struct drm_plane *plane;
+			struct drm_crtc *crtc;
+
+			plane = omap_plane_init(dev, id, true);
+			crtc = omap_crtc_init(dev, plane, channel, id);
+
+			BUG_ON(priv->num_crtcs >= ARRAY_SIZE(priv->crtcs));
+			priv->crtcs[id] = crtc;
+			priv->num_crtcs++;
+
+			priv->planes[id] = plane;
+			priv->num_planes++;
+
+			id++;
+		}
+	}
+
+	/*
+	 * we have allocated crtcs according to the need of the panels/encoders,
+	 * adding more crtcs here if needed
+	 */
+	for (; id < num_crtcs; id++) {
+
+		/* find a free manager for this crtc */
+		for (i = 0; i < num_mgrs; i++) {
+			if (!channel_used(dev, i)) {
+				struct drm_plane *plane;
+				struct drm_crtc *crtc;
+
+				plane = omap_plane_init(dev, id, true);
+				crtc = omap_crtc_init(dev, plane, i, id);
+
+				BUG_ON(priv->num_crtcs >=
+					ARRAY_SIZE(priv->crtcs));
+
+				priv->crtcs[id] = crtc;
+				priv->num_crtcs++;
+
+				priv->planes[id] = plane;
+				priv->num_planes++;
+
+				break;
+			} else {
+				continue;
+			}
+		}
+
+		if (i == num_mgrs) {
+			/* this shouldn't really happen */
+			dev_err(dev->dev, "no managers left for crtc\n");
+			return -ENOMEM;
+		}
+	}
+
+	/*
+	 * Create normal planes for the remaining overlays:
+	 */
+	for (; id < num_ovls; id++) {
+		struct drm_plane *plane = omap_plane_init(dev, id, false);
+
+		BUG_ON(priv->num_planes >= ARRAY_SIZE(priv->planes));
+		priv->planes[priv->num_planes++] = plane;
+	}
+
+	for (i = 0; i < priv->num_encoders; i++) {
+		struct drm_encoder *encoder = priv->encoders[i];
+		struct omap_dss_device *dssdev =
+					omap_encoder_get_dssdev(encoder);
+
 		/* figure out which crtc's we can connect the encoder to: */
 		encoder->possible_crtcs = 0;
 		for (id = 0; id < priv->num_crtcs; id++) {
-			enum omap_dss_output_id supported_outputs =
-					dss_feat_get_supported_outputs(pipe2chan(id));
+			struct drm_crtc *crtc = priv->crtcs[id];
+			enum omap_channel crtc_channel;
+			enum omap_dss_output_id supported_outputs;
+
+			crtc_channel = omap_crtc_channel(crtc);
+			supported_outputs =
+				dss_feat_get_supported_outputs(crtc_channel);
+
 			if (supported_outputs & dssdev->output->id)
 				encoder->possible_crtcs |= (1 << id);
 		}
 	}
 
+	DBG("registered %d planes, %d crtcs, %d encoders and %d connectors\n",
+		priv->num_planes, priv->num_crtcs, priv->num_encoders,
+		priv->num_connectors);
+
 	dev->mode_config.min_width = 32;
 	dev->mode_config.min_height = 32;
 
@@ -303,7 +404,7 @@ static int ioctl_gem_info(struct drm_device *dev, void *data,
 	return ret;
 }
 
-struct drm_ioctl_desc ioctls[DRM_COMMAND_END - DRM_COMMAND_BASE] = {
+static struct drm_ioctl_desc ioctls[DRM_COMMAND_END - DRM_COMMAND_BASE] = {
 	DRM_IOCTL_DEF_DRV(OMAP_GET_PARAM, ioctl_get_param, DRM_UNLOCKED|DRM_AUTH),
 	DRM_IOCTL_DEF_DRV(OMAP_SET_PARAM, ioctl_set_param, DRM_UNLOCKED|DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
 	DRM_IOCTL_DEF_DRV(OMAP_GEM_NEW, ioctl_gem_new, DRM_UNLOCKED|DRM_AUTH),
@@ -567,7 +668,7 @@ static const struct dev_pm_ops omapdrm_pm_ops = {
 };
 #endif
 
-struct platform_driver pdev = {
+static struct platform_driver pdev = {
 		.driver = {
 			.name = DRIVER_NAME,
 			.owner = THIS_MODULE,

drivers/gpu/drm/omapdrm/omap_drv.h

@@ -139,8 +139,8 @@ void omap_gem_describe_objects(struct list_head *list, struct seq_file *m);
 int omap_gem_resume(struct device *dev);
 #endif
 
-int omap_irq_enable_vblank(struct drm_device *dev, int crtc);
-void omap_irq_disable_vblank(struct drm_device *dev, int crtc);
+int omap_irq_enable_vblank(struct drm_device *dev, int crtc_id);
+void omap_irq_disable_vblank(struct drm_device *dev, int crtc_id);
 irqreturn_t omap_irq_handler(DRM_IRQ_ARGS);
 void omap_irq_preinstall(struct drm_device *dev);
 int omap_irq_postinstall(struct drm_device *dev);
@@ -271,39 +271,9 @@ static inline int align_pitch(int pitch, int width, int bpp)
 	return ALIGN(pitch, 8 * bytespp);
 }
 
-static inline enum omap_channel pipe2chan(int pipe)
-{
-	int num_mgrs = dss_feat_get_num_mgrs();
-
-	/*
-	 * We usually don't want to create a CRTC for each manager,
-	 * at least not until we have a way to expose private planes
-	 * to userspace.  Otherwise there would not be enough video
-	 * pipes left for drm planes.  The higher #'d managers tend
-	 * to have more features so start in reverse order.
-	 */
-	return num_mgrs - pipe - 1;
-}
-
 /* map crtc to vblank mask */
-static inline uint32_t pipe2vbl(int crtc)
-{
-	enum omap_channel channel = pipe2chan(crtc);
-	return dispc_mgr_get_vsync_irq(channel);
-}
-
-static inline int crtc2pipe(struct drm_device *dev, struct drm_crtc *crtc)
-{
-	struct omap_drm_private *priv = dev->dev_private;
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(priv->crtcs); i++)
-		if (priv->crtcs[i] == crtc)
-			return i;
-
-	BUG();  /* bogus CRTC ptr */
-	return -1;
-}
+uint32_t pipe2vbl(struct drm_crtc *crtc);
+struct omap_dss_device *omap_encoder_get_dssdev(struct drm_encoder *encoder);
 
 /* should these be made into common util helpers?
  */

drivers/gpu/drm/omapdrm/omap_encoder.c

@@ -41,6 +41,13 @@ struct omap_encoder {
 	struct omap_dss_device *dssdev;
 };
 
+struct omap_dss_device *omap_encoder_get_dssdev(struct drm_encoder *encoder)
+{
+	struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
+
+	return omap_encoder->dssdev;
+}
+
 static void omap_encoder_destroy(struct drm_encoder *encoder)
 {
 	struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
@@ -128,13 +135,26 @@ int omap_encoder_update(struct drm_encoder *encoder,
 
 	dssdev->output->manager = mgr;
 
-	ret = dssdrv->check_timings(dssdev, timings);
+	if (dssdrv->check_timings) {
+		ret = dssdrv->check_timings(dssdev, timings);
+	} else {
+		struct omap_video_timings t = {0};
+
+		dssdrv->get_timings(dssdev, &t);
+
+		if (memcmp(timings, &t, sizeof(struct omap_video_timings)))
+			ret = -EINVAL;
+		else
+			ret = 0;
+	}
+
 	if (ret) {
 		dev_err(dev->dev, "could not set timings: %d\n", ret);
 		return ret;
 	}
 
-	dssdrv->set_timings(dssdev, timings);
+	if (dssdrv->set_timings)
+		dssdrv->set_timings(dssdev, timings);
 
 	return 0;
 }

drivers/gpu/drm/omapdrm/omap_gem_dmabuf.c

@@ -178,7 +178,7 @@ static int omap_gem_dmabuf_mmap(struct dma_buf *buffer,
 	return omap_gem_mmap_obj(obj, vma);
 }
 
-struct dma_buf_ops omap_dmabuf_ops = {
+static struct dma_buf_ops omap_dmabuf_ops = {
 		.map_dma_buf = omap_gem_map_dma_buf,
 		.unmap_dma_buf = omap_gem_unmap_dma_buf,
 		.release = omap_gem_dmabuf_release,

drivers/gpu/drm/omapdrm/omap_irq.c

@@ -130,12 +130,13 @@ int omap_irq_wait(struct drm_device *dev, struct omap_irq_wait *wait,
  * Zero on success, appropriate errno if the given @crtc's vblank
  * interrupt cannot be enabled.
  */
-int omap_irq_enable_vblank(struct drm_device *dev, int crtc)
+int omap_irq_enable_vblank(struct drm_device *dev, int crtc_id)
 {
 	struct omap_drm_private *priv = dev->dev_private;
+	struct drm_crtc *crtc = priv->crtcs[crtc_id];
 	unsigned long flags;
 
-	DBG("dev=%p, crtc=%d", dev, crtc);
+	DBG("dev=%p, crtc=%d", dev, crtc_id);
 
 	dispc_runtime_get();
 	spin_lock_irqsave(&list_lock, flags);
@@ -156,12 +157,13 @@ int omap_irq_enable_vblank(struct drm_device *dev, int crtc)
  * a hardware vblank counter, this routine should be a no-op, since
  * interrupts will have to stay on to keep the count accurate.
  */
-void omap_irq_disable_vblank(struct drm_device *dev, int crtc)
+void omap_irq_disable_vblank(struct drm_device *dev, int crtc_id)
 {
 	struct omap_drm_private *priv = dev->dev_private;
+	struct drm_crtc *crtc = priv->crtcs[crtc_id];
 	unsigned long flags;
 
-	DBG("dev=%p, crtc=%d", dev, crtc);
+	DBG("dev=%p, crtc=%d", dev, crtc_id);
 
 	dispc_runtime_get();
 	spin_lock_irqsave(&list_lock, flags);
@@ -186,9 +188,12 @@ irqreturn_t omap_irq_handler(DRM_IRQ_ARGS)
 
 	VERB("irqs: %08x", irqstatus);
 
-	for (id = 0; id < priv->num_crtcs; id++)
-		if (irqstatus & pipe2vbl(id))
+	for (id = 0; id < priv->num_crtcs; id++) {
+		struct drm_crtc *crtc = priv->crtcs[id];
+
+		if (irqstatus & pipe2vbl(crtc))
 			drm_handle_vblank(dev, id);
+	}
 
 	spin_lock_irqsave(&list_lock, flags);
 	list_for_each_entry_safe(handler, n, &priv->irq_list, node) {

drivers/gpu/drm/omapdrm/omap_plane.c

@@ -247,6 +247,12 @@ static int omap_plane_update(struct drm_plane *plane,
 {
 	struct omap_plane *omap_plane = to_omap_plane(plane);
 	omap_plane->enabled = true;
+
+	if (plane->fb)
+		drm_framebuffer_unreference(plane->fb);
+
+	drm_framebuffer_reference(fb);
+
 	return omap_plane_mode_set(plane, crtc, fb,
 			crtc_x, crtc_y, crtc_w, crtc_h,
 			src_x, src_y, src_w, src_h,

drivers/video/omap2/displays/panel-acx565akm.c

@@ -29,8 +29,10 @@
 #include <linux/sched.h>
 #include <linux/backlight.h>
 #include <linux/fb.h>
+#include <linux/gpio.h>
 
 #include <video/omapdss.h>
+#include <video/omap-panel-data.h>
 
 #define MIPID_CMD_READ_DISP_ID		0x04
 #define MIPID_CMD_READ_RED		0x06
@@ -336,8 +338,6 @@ static int acx565akm_bl_update_status(struct backlight_device *dev)
 	r = 0;
 	if (md->has_bc)
 		acx565akm_set_brightness(md, level);
-	else if (md->dssdev->set_backlight)
-		r = md->dssdev->set_backlight(md->dssdev, level);
 	else
 		r = -ENODEV;
 
@@ -352,7 +352,7 @@ static int acx565akm_bl_get_intensity(struct backlight_device *dev)
 
 	dev_dbg(&dev->dev, "%s\n", __func__);
 
-	if (!md->has_bc && md->dssdev->set_backlight == NULL)
+	if (!md->has_bc)
 		return -ENODEV;
 
 	if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
@@ -496,21 +496,38 @@ static struct omap_video_timings acx_panel_timings = {
 	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
 };
 
+static struct panel_acx565akm_data *get_panel_data(struct omap_dss_device *dssdev)
+{
+	return (struct panel_acx565akm_data *) dssdev->data;
+}
+
 static int acx_panel_probe(struct omap_dss_device *dssdev)
 {
 	int r;
 	struct acx565akm_device *md = &acx_dev;
+	struct panel_acx565akm_data *panel_data = get_panel_data(dssdev);
 	struct backlight_device *bldev;
 	int max_brightness, brightness;
 	struct backlight_properties props;
 
 	dev_dbg(&dssdev->dev, "%s\n", __func__);
 
+	if (!panel_data)
+		return -EINVAL;
+
 	/* FIXME AC bias ? */
 	dssdev->panel.timings = acx_panel_timings;
 
-	if (dssdev->platform_enable)
-		dssdev->platform_enable(dssdev);
+	if (gpio_is_valid(panel_data->reset_gpio)) {
+		r = devm_gpio_request_one(&dssdev->dev, panel_data->reset_gpio,
+				GPIOF_OUT_INIT_LOW, "lcd reset");
+		if (r)
+			return r;
+	}
+
+	if (gpio_is_valid(panel_data->reset_gpio))
+		gpio_set_value(panel_data->reset_gpio, 1);
+
 	/*
 	 * After reset we have to wait 5 msec before the first
 	 * command can be sent.
@@ -522,8 +539,9 @@ static int acx_panel_probe(struct omap_dss_device *dssdev)
 	r = panel_detect(md);
 	if (r) {
 		dev_err(&dssdev->dev, "%s panel detect error\n", __func__);
-		if (!md->enabled && dssdev->platform_disable)
-			dssdev->platform_disable(dssdev);
+		if (!md->enabled && gpio_is_valid(panel_data->reset_gpio))
+			gpio_set_value(panel_data->reset_gpio, 0);
+
 		return r;
 	}
 
@@ -532,8 +550,8 @@ static int acx_panel_probe(struct omap_dss_device *dssdev)
 	mutex_unlock(&acx_dev.mutex);
 
 	if (!md->enabled) {
-		if (dssdev->platform_disable)
-			dssdev->platform_disable(dssdev);
+		if (gpio_is_valid(panel_data->reset_gpio))
+			gpio_set_value(panel_data->reset_gpio, 0);
 	}
 
 	/*------- Backlight control --------*/
@@ -557,15 +575,10 @@ static int acx_panel_probe(struct omap_dss_device *dssdev)
 		md->cabc_mode = get_hw_cabc_mode(md);
 	}
 
-	if (md->has_bc)
-		max_brightness = 255;
-	else
-		max_brightness = dssdev->max_backlight_level;
+	max_brightness = 255;
 
 	if (md->has_bc)
 		brightness = acx565akm_get_actual_brightness(md);
-	else if (dssdev->get_backlight)
-		brightness = dssdev->get_backlight(dssdev);
 	else
 		brightness = 0;
 
@@ -591,6 +604,7 @@ static void acx_panel_remove(struct omap_dss_device *dssdev)
 static int acx_panel_power_on(struct omap_dss_device *dssdev)
 {
 	struct acx565akm_device *md = &acx_dev;
+	struct panel_acx565akm_data *panel_data = get_panel_data(dssdev);
 	int r;
 
 	dev_dbg(&dssdev->dev, "%s\n", __func__);
@@ -612,11 +626,8 @@ static int acx_panel_power_on(struct omap_dss_device *dssdev)
 	/*FIXME tweak me */
 	msleep(50);
 
-	if (dssdev->platform_enable) {
-		r = dssdev->platform_enable(dssdev);
-		if (r)
-			goto fail;
-	}
+	if (gpio_is_valid(panel_data->reset_gpio))
+		gpio_set_value(panel_data->reset_gpio, 1);
 
 	if (md->enabled) {
 		dev_dbg(&md->spi->dev, "panel already enabled\n");
@@ -645,8 +656,7 @@ static int acx_panel_power_on(struct omap_dss_device *dssdev)
 	mutex_unlock(&md->mutex);
 
 	return acx565akm_bl_update_status(md->bl_dev);
-fail:
-	omapdss_sdi_display_disable(dssdev);
+
 fail_unlock:
 	mutex_unlock(&md->mutex);
 	return r;
@@ -655,6 +665,7 @@ static int acx_panel_power_on(struct omap_dss_device *dssdev)
 static void acx_panel_power_off(struct omap_dss_device *dssdev)
 {
 	struct acx565akm_device *md = &acx_dev;
+	struct panel_acx565akm_data *panel_data = get_panel_data(dssdev);
 
 	dev_dbg(&dssdev->dev, "%s\n", __func__);
 
@@ -678,8 +689,8 @@ static void acx_panel_power_off(struct omap_dss_device *dssdev)
 	 */
 	msleep(50);
 
-	if (dssdev->platform_disable)
-		dssdev->platform_disable(dssdev);
+	if (gpio_is_valid(panel_data->reset_gpio))
+		gpio_set_value(panel_data->reset_gpio, 0);
 
 	/* FIXME need to tweak this delay */
 	msleep(100);

drivers/video/omap2/displays/panel-generic-dpi.c

@@ -33,9 +33,10 @@
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
+#include <linux/gpio.h>
 #include <video/omapdss.h>
 
-#include <video/omap-panel-generic-dpi.h>
+#include <video/omap-panel-data.h>
 
 struct panel_config {
 	struct omap_video_timings timings;
@@ -533,7 +534,7 @@ static inline struct panel_generic_dpi_data
 
 static int generic_dpi_panel_power_on(struct omap_dss_device *dssdev)
 {
-	int r;
+	int r, i;
 	struct panel_generic_dpi_data *panel_data = get_panel_data(dssdev);
 	struct panel_drv_data *drv_data = dev_get_drvdata(&dssdev->dev);
 	struct panel_config *panel_config = drv_data->panel_config;
@@ -552,15 +553,13 @@ static int generic_dpi_panel_power_on(struct omap_dss_device *dssdev)
 	if (panel_config->power_on_delay)
 		msleep(panel_config->power_on_delay);
 
-	if (panel_data->platform_enable) {
-		r = panel_data->platform_enable(dssdev);
-		if (r)
-			goto err1;
+	for (i = 0; i < panel_data->num_gpios; ++i) {
+		gpio_set_value_cansleep(panel_data->gpios[i],
+				panel_data->gpio_invert[i] ? 0 : 1);
 	}
 
 	return 0;
-err1:
-	omapdss_dpi_display_disable(dssdev);
+
 err0:
 	return r;
 }
@@ -570,12 +569,15 @@ static void generic_dpi_panel_power_off(struct omap_dss_device *dssdev)
 	struct panel_generic_dpi_data *panel_data = get_panel_data(dssdev);
 	struct panel_drv_data *drv_data = dev_get_drvdata(&dssdev->dev);
 	struct panel_config *panel_config = drv_data->panel_config;
+	int i;
 
 	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
 		return;
 
-	if (panel_data->platform_disable)
-		panel_data->platform_disable(dssdev);
+	for (i = panel_data->num_gpios - 1; i >= 0; --i) {
+		gpio_set_value_cansleep(panel_data->gpios[i],
+				panel_data->gpio_invert[i] ? 1 : 0);
+	}
 
 	/* wait couple of vsyncs after disabling the LCD */
 	if (panel_config->power_off_delay)
@@ -589,7 +591,7 @@ static int generic_dpi_panel_probe(struct omap_dss_device *dssdev)
 	struct panel_generic_dpi_data *panel_data = get_panel_data(dssdev);
 	struct panel_config *panel_config = NULL;
 	struct panel_drv_data *drv_data = NULL;
-	int i;
+	int i, r;
 
 	dev_dbg(&dssdev->dev, "probe\n");
 
@@ -606,9 +608,18 @@ static int generic_dpi_panel_probe(struct omap_dss_device *dssdev)
 	if (!panel_config)
 		return -EINVAL;
 
+	for (i = 0; i < panel_data->num_gpios; ++i) {
+		r = devm_gpio_request_one(&dssdev->dev, panel_data->gpios[i],
+				panel_data->gpio_invert[i] ?
+				GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
+				"panel gpio");
+		if (r)
+			return r;
+	}
+
 	dssdev->panel.timings = panel_config->timings;
 
-	drv_data = kzalloc(sizeof(*drv_data), GFP_KERNEL);
+	drv_data = devm_kzalloc(&dssdev->dev, sizeof(*drv_data), GFP_KERNEL);
 	if (!drv_data)
 		return -ENOMEM;
 
@@ -624,12 +635,8 @@ static int generic_dpi_panel_probe(struct omap_dss_device *dssdev)
 
 static void __exit generic_dpi_panel_remove(struct omap_dss_device *dssdev)
 {
-	struct panel_drv_data *drv_data = dev_get_drvdata(&dssdev->dev);
-
 	dev_dbg(&dssdev->dev, "remove\n");
 
-	kfree(drv_data);
-
 	dev_set_drvdata(&dssdev->dev, NULL);
 }
 

drivers/video/omap2/displays/panel-lgphilips-lb035q02.c

@@ -20,8 +20,10 @@
 #include <linux/delay.h>
 #include <linux/spi/spi.h>
 #include <linux/mutex.h>
+#include <linux/gpio.h>
 
 #include <video/omapdss.h>
+#include <video/omap-panel-data.h>
 
 struct lb035q02_data {
 	struct mutex lock;
@@ -48,9 +50,16 @@ static struct omap_video_timings lb035q02_timings = {
 	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
 };
 
+static inline struct panel_generic_dpi_data
+*get_panel_data(const struct omap_dss_device *dssdev)
+{
+	return (struct panel_generic_dpi_data *) dssdev->data;
+}
+
 static int lb035q02_panel_power_on(struct omap_dss_device *dssdev)
 {
-	int r;
+	struct panel_generic_dpi_data *panel_data = get_panel_data(dssdev);
+	int r, i;
 
 	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
 		return 0;
@@ -62,54 +71,65 @@ static int lb035q02_panel_power_on(struct omap_dss_device *dssdev)
 	if (r)
 		goto err0;
 
-	if (dssdev->platform_enable) {
-		r = dssdev->platform_enable(dssdev);
-		if (r)
-			goto err1;
+	for (i = 0; i < panel_data->num_gpios; ++i) {
+		gpio_set_value_cansleep(panel_data->gpios[i],
+				panel_data->gpio_invert[i] ? 0 : 1);
 	}
 
 	return 0;
-err1:
-	omapdss_dpi_display_disable(dssdev);
+
 err0:
 	return r;
 }
 
 static void lb035q02_panel_power_off(struct omap_dss_device *dssdev)
 {
+	struct panel_generic_dpi_data *panel_data = get_panel_data(dssdev);
+	int i;
+
 	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
 		return;
 
-	if (dssdev->platform_disable)
-		dssdev->platform_disable(dssdev);
+	for (i = panel_data->num_gpios - 1; i >= 0; --i) {
+		gpio_set_value_cansleep(panel_data->gpios[i],
+				panel_data->gpio_invert[i] ? 1 : 0);
+	}
 
 	omapdss_dpi_display_disable(dssdev);
 }
 
 static int lb035q02_panel_probe(struct omap_dss_device *dssdev)
 {
+	struct panel_generic_dpi_data *panel_data = get_panel_data(dssdev);
 	struct lb035q02_data *ld;
-	int r;
+	int r, i;
+
+	if (!panel_data)
+		return -EINVAL;
 
 	dssdev->panel.timings = lb035q02_timings;
 
-	ld = kzalloc(sizeof(*ld), GFP_KERNEL);
-	if (!ld) {
-		r = -ENOMEM;
-		goto err;
+	ld = devm_kzalloc(&dssdev->dev, sizeof(*ld), GFP_KERNEL);
+	if (!ld)
+		return -ENOMEM;
+
+	for (i = 0; i < panel_data->num_gpios; ++i) {
+		r = devm_gpio_request_one(&dssdev->dev, panel_data->gpios[i],
+				panel_data->gpio_invert[i] ?
+				GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
+				"panel gpio");
+		if (r)
+			return r;
 	}
+
 	mutex_init(&ld->lock);
 	dev_set_drvdata(&dssdev->dev, ld);
+
 	return 0;
-err:
-	return r;
 }
 
 static void lb035q02_panel_remove(struct omap_dss_device *dssdev)
 {
-	struct lb035q02_data *ld = dev_get_drvdata(&dssdev->dev);
-
-	kfree(ld);
 }
 
 static int lb035q02_panel_enable(struct omap_dss_device *dssdev)

drivers/video/omap2/displays/panel-n8x0.c

@@ -5,11 +5,10 @@
 #include <linux/slab.h>
 #include <linux/gpio.h>
 #include <linux/spi/spi.h>
-#include <linux/backlight.h>
 #include <linux/fb.h>
 
 #include <video/omapdss.h>
-#include <video/omap-panel-n8x0.h>
+#include <video/omap-panel-data.h>
 
 #define BLIZZARD_REV_CODE                      0x00
 #define BLIZZARD_CONFIG                        0x02
@@ -69,7 +68,6 @@ static struct panel_drv_data {
 
 	struct omap_dss_device *dssdev;
 	struct spi_device *spidev;
-	struct backlight_device *bldev;
 
 	int blizzard_ver;
 } s_drv_data;
@@ -297,12 +295,6 @@ static int n8x0_panel_power_on(struct omap_dss_device *dssdev)
 
 	gpio_direction_output(bdata->ctrl_pwrdown, 1);
 
-	if (bdata->platform_enable) {
-		r = bdata->platform_enable(dssdev);
-		if (r)
-			goto err_plat_en;
-	}
-
 	omapdss_rfbi_set_size(dssdev, dssdev->panel.timings.x_res,
 		dssdev->panel.timings.y_res);
 	omapdss_rfbi_set_pixel_size(dssdev, dssdev->ctrl.pixel_size);
@@ -375,9 +367,6 @@ static int n8x0_panel_power_on(struct omap_dss_device *dssdev)
 err_inv_chip:
 	omapdss_rfbi_display_disable(dssdev);
 err_rfbi_en:
-	if (bdata->platform_disable)
-		bdata->platform_disable(dssdev);
-err_plat_en:
 	gpio_direction_output(bdata->ctrl_pwrdown, 0);
 	return r;
 }
@@ -394,9 +383,6 @@ static void n8x0_panel_power_off(struct omap_dss_device *dssdev)
 	send_display_off(spi);
 	send_sleep_in(spi);
 
-	if (bdata->platform_disable)
-		bdata->platform_disable(dssdev);
-
 	/*
 	 * HACK: we should turn off the panel here, but there is some problem
 	 * with the initialization sequence, and we fail to init the panel if we
@@ -424,54 +410,10 @@ static const struct rfbi_timings n8x0_panel_timings = {
 	.cs_pulse_width = 0,
 };
 
-static int n8x0_bl_update_status(struct backlight_device *dev)
-{
-	struct omap_dss_device *dssdev = dev_get_drvdata(&dev->dev);
-	struct panel_n8x0_data *bdata = get_board_data(dssdev);
-	struct panel_drv_data *ddata = get_drv_data(dssdev);
-	int r;
-	int level;
-
-	mutex_lock(&ddata->lock);
-
-	if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
-			dev->props.power == FB_BLANK_UNBLANK)
-		level = dev->props.brightness;
-	else
-		level = 0;
-
-	dev_dbg(&dssdev->dev, "update brightness to %d\n", level);
-
-	if (!bdata->set_backlight)
-		r = -EINVAL;
-	else
-		r = bdata->set_backlight(dssdev, level);
-
-	mutex_unlock(&ddata->lock);
-
-	return r;
-}
-
-static int n8x0_bl_get_intensity(struct backlight_device *dev)
-{
-	if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
-			dev->props.power == FB_BLANK_UNBLANK)
-		return dev->props.brightness;
-
-	return 0;
-}
-
-static const struct backlight_ops n8x0_bl_ops = {
-	.get_brightness = n8x0_bl_get_intensity,
-	.update_status  = n8x0_bl_update_status,
-};
-
 static int n8x0_panel_probe(struct omap_dss_device *dssdev)
 {
 	struct panel_n8x0_data *bdata = get_board_data(dssdev);
 	struct panel_drv_data *ddata;
-	struct backlight_device *bldev;
-	struct backlight_properties props;
 	int r;
 
 	dev_dbg(&dssdev->dev, "probe\n");
@@ -491,40 +433,27 @@ static int n8x0_panel_probe(struct omap_dss_device *dssdev)
 	dssdev->ctrl.rfbi_timings = n8x0_panel_timings;
 	dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE;
 
-	memset(&props, 0, sizeof(props));
-	props.max_brightness = 127;
-	props.type = BACKLIGHT_PLATFORM;
-	bldev = backlight_device_register(dev_name(&dssdev->dev), &dssdev->dev,
-			dssdev, &n8x0_bl_ops, &props);
-	if (IS_ERR(bldev)) {
-		r = PTR_ERR(bldev);
-		dev_err(&dssdev->dev, "register backlight failed\n");
-		return r;
+	if (gpio_is_valid(bdata->panel_reset)) {
+		r = devm_gpio_request_one(&dssdev->dev, bdata->panel_reset,
+				GPIOF_OUT_INIT_LOW, "PANEL RESET");
+		if (r)
+			return r;
 	}
 
-	ddata->bldev = bldev;
-
-	bldev->props.fb_blank = FB_BLANK_UNBLANK;
-	bldev->props.power = FB_BLANK_UNBLANK;
-	bldev->props.brightness = 127;
-
-	n8x0_bl_update_status(bldev);
+	if (gpio_is_valid(bdata->ctrl_pwrdown)) {
+		r = devm_gpio_request_one(&dssdev->dev, bdata->ctrl_pwrdown,
+				GPIOF_OUT_INIT_LOW, "PANEL PWRDOWN");
+		if (r)
+			return r;
+	}
 
 	return 0;
 }
 
 static void n8x0_panel_remove(struct omap_dss_device *dssdev)
 {
-	struct panel_drv_data *ddata = get_drv_data(dssdev);
-	struct backlight_device *bldev;
-
 	dev_dbg(&dssdev->dev, "remove\n");
 
-	bldev = ddata->bldev;
-	bldev->props.power = FB_BLANK_POWERDOWN;
-	n8x0_bl_update_status(bldev);
-	backlight_device_unregister(bldev);
-
 	dev_set_drvdata(&dssdev->dev, NULL);
 }
 

drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c

@@ -19,10 +19,11 @@
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/spi/spi.h>
-#include <linux/backlight.h>
 #include <linux/fb.h>
+#include <linux/gpio.h>
 
 #include <video/omapdss.h>
+#include <video/omap-panel-data.h>
 
 #define LCD_XRES		800
 #define LCD_YRES		480
@@ -32,10 +33,6 @@
  */
 #define LCD_PIXEL_CLOCK		23800
 
-struct nec_8048_data {
-	struct backlight_device *bl;
-};
-
 static const struct {
 	unsigned char addr;
 	unsigned char dat;
@@ -84,93 +81,47 @@ static struct omap_video_timings nec_8048_panel_timings = {
 	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
 };
 
-static int nec_8048_bl_update_status(struct backlight_device *bl)
-{
-	struct omap_dss_device *dssdev = dev_get_drvdata(&bl->dev);
-	int level;
-
-	if (!dssdev->set_backlight)
-		return -EINVAL;
-
-	if (bl->props.fb_blank == FB_BLANK_UNBLANK &&
-			bl->props.power == FB_BLANK_UNBLANK)
-		level = bl->props.brightness;
-	else
-		level = 0;
-
-	return dssdev->set_backlight(dssdev, level);
-}
-
-static int nec_8048_bl_get_brightness(struct backlight_device *bl)
+static inline struct panel_nec_nl8048_data
+*get_panel_data(const struct omap_dss_device *dssdev)
 {
-	if (bl->props.fb_blank == FB_BLANK_UNBLANK &&
-			bl->props.power == FB_BLANK_UNBLANK)
-		return bl->props.brightness;
-
-	return 0;
+	return (struct panel_nec_nl8048_data *) dssdev->data;
 }
 
-static const struct backlight_ops nec_8048_bl_ops = {
-	.get_brightness	= nec_8048_bl_get_brightness,
-	.update_status	= nec_8048_bl_update_status,
-};
-
 static int nec_8048_panel_probe(struct omap_dss_device *dssdev)
 {
-	struct backlight_device *bl;
-	struct nec_8048_data *necd;
-	struct backlight_properties props;
+	struct panel_nec_nl8048_data *pd = get_panel_data(dssdev);
 	int r;
 
-	dssdev->panel.timings = nec_8048_panel_timings;
-
-	necd = kzalloc(sizeof(*necd), GFP_KERNEL);
-	if (!necd)
-		return -ENOMEM;
-
-	dev_set_drvdata(&dssdev->dev, necd);
+	if (!pd)
+		return -EINVAL;
 
-	memset(&props, 0, sizeof(struct backlight_properties));
-	props.max_brightness = 255;
+	dssdev->panel.timings = nec_8048_panel_timings;
 
-	bl = backlight_device_register("nec-8048", &dssdev->dev, dssdev,
-			&nec_8048_bl_ops, &props);
-	if (IS_ERR(bl)) {
-		r = PTR_ERR(bl);
-		kfree(necd);
-		return r;
+	if (gpio_is_valid(pd->qvga_gpio)) {
+		r = devm_gpio_request_one(&dssdev->dev, pd->qvga_gpio,
+				GPIOF_OUT_INIT_HIGH, "lcd QVGA");
+		if (r)
+			return r;
 	}
-	necd->bl = bl;
-
-	bl->props.fb_blank = FB_BLANK_UNBLANK;
-	bl->props.power = FB_BLANK_UNBLANK;
-	bl->props.max_brightness = dssdev->max_backlight_level;
-	bl->props.brightness = dssdev->max_backlight_level;
 
-	r = nec_8048_bl_update_status(bl);
-	if (r < 0)
-		dev_err(&dssdev->dev, "failed to set lcd brightness\n");
+	if (gpio_is_valid(pd->res_gpio)) {
+		r = devm_gpio_request_one(&dssdev->dev, pd->res_gpio,
+				GPIOF_OUT_INIT_LOW, "lcd RES");
+		if (r)
+			return r;
+	}
 
 	return 0;
 }
 
 static void nec_8048_panel_remove(struct omap_dss_device *dssdev)
 {
-	struct nec_8048_data *necd = dev_get_drvdata(&dssdev->dev);
-	struct backlight_device *bl = necd->bl;
-
-	bl->props.power = FB_BLANK_POWERDOWN;
-	nec_8048_bl_update_status(bl);
-	backlight_device_unregister(bl);
-
-	kfree(necd);
 }
 
 static int nec_8048_panel_power_on(struct omap_dss_device *dssdev)
 {
+	struct panel_nec_nl8048_data *pd = get_panel_data(dssdev);
 	int r;
-	struct nec_8048_data *necd = dev_get_drvdata(&dssdev->dev);
-	struct backlight_device *bl = necd->bl;
 
 	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
 		return 0;
@@ -182,36 +133,24 @@ static int nec_8048_panel_power_on(struct omap_dss_device *dssdev)
 	if (r)
 		goto err0;
 
-	if (dssdev->platform_enable) {
-		r = dssdev->platform_enable(dssdev);
-		if (r)
-			goto err1;
-	}
-
-	r = nec_8048_bl_update_status(bl);
-	if (r < 0)
-		dev_err(&dssdev->dev, "failed to set lcd brightness\n");
+	if (gpio_is_valid(pd->res_gpio))
+		gpio_set_value_cansleep(pd->res_gpio, 1);
 
 	return 0;
-err1:
-	omapdss_dpi_display_disable(dssdev);
+
 err0:
 	return r;
 }
 
 static void nec_8048_panel_power_off(struct omap_dss_device *dssdev)
 {
-	struct nec_8048_data *necd = dev_get_drvdata(&dssdev->dev);
-	struct backlight_device *bl = necd->bl;
+	struct panel_nec_nl8048_data *pd = get_panel_data(dssdev);
 
 	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
 		return;
 
-	bl->props.brightness = 0;
-	nec_8048_bl_update_status(bl);
-
-	if (dssdev->platform_disable)
-		dssdev->platform_disable(dssdev);
+	if (gpio_is_valid(pd->res_gpio))
+		gpio_set_value_cansleep(pd->res_gpio, 0);
 
 	omapdss_dpi_display_disable(dssdev);
 }
@@ -303,16 +242,22 @@ static int nec_8048_spi_remove(struct spi_device *spi)
 	return 0;
 }
 
-static int nec_8048_spi_suspend(struct spi_device *spi, pm_message_t mesg)
+#ifdef CONFIG_PM_SLEEP
+
+static int nec_8048_spi_suspend(struct device *dev)
 {
+	struct spi_device *spi = to_spi_device(dev);
+
 	nec_8048_spi_send(spi, 2, 0x01);
 	mdelay(40);
 
 	return 0;
 }
 
-static int nec_8048_spi_resume(struct spi_device *spi)
+static int nec_8048_spi_resume(struct device *dev)
 {
+	struct spi_device *spi = to_spi_device(dev);
+
 	/* reinitialize the panel */
 	spi_setup(spi);
 	nec_8048_spi_send(spi, 2, 0x00);
@@ -321,14 +266,20 @@ static int nec_8048_spi_resume(struct spi_device *spi)
 	return 0;
 }
 
+static SIMPLE_DEV_PM_OPS(nec_8048_spi_pm_ops, nec_8048_spi_suspend,
+		nec_8048_spi_resume);
+#define NEC_8048_SPI_PM_OPS (&nec_8048_spi_pm_ops)
+#else
+#define NEC_8048_SPI_PM_OPS NULL
+#endif
+
 static struct spi_driver nec_8048_spi_driver = {
 	.probe		= nec_8048_spi_probe,
 	.remove		= nec_8048_spi_remove,
-	.suspend	= nec_8048_spi_suspend,
-	.resume		= nec_8048_spi_resume,
 	.driver		= {
 		.name	= "nec_8048_spi",
 		.owner	= THIS_MODULE,
+		.pm	= NEC_8048_SPI_PM_OPS,
 	},
 };
 

drivers/video/omap2/displays/panel-picodlp.c

@@ -31,7 +31,7 @@
 #include <linux/gpio.h>
 
 #include <video/omapdss.h>
-#include <video/omap-panel-picodlp.h>
+#include <video/omap-panel-data.h>
 
 #include "panel-picodlp.h"
 
@@ -354,12 +354,6 @@ static int picodlp_panel_power_on(struct omap_dss_device *dssdev)
 	struct picodlp_data *picod = dev_get_drvdata(&dssdev->dev);
 	struct picodlp_panel_data *picodlp_pdata = get_panel_data(dssdev);
 
-	if (dssdev->platform_enable) {
-		r = dssdev->platform_enable(dssdev);
-		if (r)
-			return r;
-	}
-
 	gpio_set_value(picodlp_pdata->pwrgood_gpio, 0);
 	msleep(1);
 	gpio_set_value(picodlp_pdata->pwrgood_gpio, 1);
@@ -398,9 +392,6 @@ static int picodlp_panel_power_on(struct omap_dss_device *dssdev)
 err:
 	omapdss_dpi_display_disable(dssdev);
 err1:
-	if (dssdev->platform_disable)
-		dssdev->platform_disable(dssdev);
-
 	return r;
 }
 
@@ -412,9 +403,6 @@ static void picodlp_panel_power_off(struct omap_dss_device *dssdev)
 
 	gpio_set_value(picodlp_pdata->emu_done_gpio, 0);
 	gpio_set_value(picodlp_pdata->pwrgood_gpio, 0);
-
-	if (dssdev->platform_disable)
-		dssdev->platform_disable(dssdev);
 }
 
 static int picodlp_panel_probe(struct omap_dss_device *dssdev)
@@ -423,11 +411,14 @@ static int picodlp_panel_probe(struct omap_dss_device *dssdev)
 	struct picodlp_panel_data *picodlp_pdata = get_panel_data(dssdev);
 	struct i2c_adapter *adapter;
 	struct i2c_client *picodlp_i2c_client;
-	int r = 0, picodlp_adapter_id;
+	int r, picodlp_adapter_id;
 
 	dssdev->panel.timings = pico_ls_timings;
 
-	picod =  kzalloc(sizeof(struct picodlp_data), GFP_KERNEL);
+	if (!picodlp_pdata)
+		return -EINVAL;
+
+	picod = devm_kzalloc(&dssdev->dev, sizeof(*picod), GFP_KERNEL);
 	if (!picod)
 		return -ENOMEM;
 
@@ -438,25 +429,37 @@ static int picodlp_panel_probe(struct omap_dss_device *dssdev)
 	adapter = i2c_get_adapter(picodlp_adapter_id);
 	if (!adapter) {
 		dev_err(&dssdev->dev, "can't get i2c adapter\n");
-		r = -ENODEV;
-		goto err;
+		return -ENODEV;
 	}
 
 	picodlp_i2c_client = i2c_new_device(adapter, &picodlp_i2c_board_info);
 	if (!picodlp_i2c_client) {
 		dev_err(&dssdev->dev, "can't add i2c device::"
 					 " picodlp_i2c_client is NULL\n");
-		r = -ENODEV;
-		goto err;
+		return -ENODEV;
 	}
 
 	picod->picodlp_i2c_client = picodlp_i2c_client;
 
 	dev_set_drvdata(&dssdev->dev, picod);
-	return r;
-err:
-	kfree(picod);
-	return r;
+
+	if (gpio_is_valid(picodlp_pdata->emu_done_gpio)) {
+		r = devm_gpio_request_one(&dssdev->dev,
+				picodlp_pdata->emu_done_gpio,
+				GPIOF_IN, "DLP EMU DONE");
+		if (r)
+			return r;
+	}
+
+	if (gpio_is_valid(picodlp_pdata->pwrgood_gpio)) {
+		r = devm_gpio_request_one(&dssdev->dev,
+				picodlp_pdata->pwrgood_gpio,
+				GPIOF_OUT_INIT_LOW, "DLP PWRGOOD");
+		if (r)
+			return r;
+	}
+
+	return 0;
 }
 
 static void picodlp_panel_remove(struct omap_dss_device *dssdev)

drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c

@@ -20,16 +20,13 @@
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/device.h>
-#include <linux/backlight.h>
 #include <linux/fb.h>
 #include <linux/err.h>
 #include <linux/slab.h>
+#include <linux/gpio.h>
 
 #include <video/omapdss.h>
-
-struct sharp_data {
-	struct backlight_device *bl;
-};
+#include <video/omap-panel-data.h>
 
 static struct omap_video_timings sharp_ls_timings = {
 	.x_res = 480,
@@ -52,91 +49,67 @@ static struct omap_video_timings sharp_ls_timings = {
 	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
 };
 
-static int sharp_ls_bl_update_status(struct backlight_device *bl)
+static inline struct panel_sharp_ls037v7dw01_data
+*get_panel_data(const struct omap_dss_device *dssdev)
 {
-	struct omap_dss_device *dssdev = dev_get_drvdata(&bl->dev);
-	int level;
-
-	if (!dssdev->set_backlight)
-		return -EINVAL;
-
-	if (bl->props.fb_blank == FB_BLANK_UNBLANK &&
-			bl->props.power == FB_BLANK_UNBLANK)
-		level = bl->props.brightness;
-	else
-		level = 0;
-
-	return dssdev->set_backlight(dssdev, level);
+	return (struct panel_sharp_ls037v7dw01_data *) dssdev->data;
 }
 
-static int sharp_ls_bl_get_brightness(struct backlight_device *bl)
-{
-	if (bl->props.fb_blank == FB_BLANK_UNBLANK &&
-			bl->props.power == FB_BLANK_UNBLANK)
-		return bl->props.brightness;
-
-	return 0;
-}
-
-static const struct backlight_ops sharp_ls_bl_ops = {
-	.get_brightness = sharp_ls_bl_get_brightness,
-	.update_status  = sharp_ls_bl_update_status,
-};
-
-
-
 static int sharp_ls_panel_probe(struct omap_dss_device *dssdev)
 {
-	struct backlight_properties props;
-	struct backlight_device *bl;
-	struct sharp_data *sd;
+	struct panel_sharp_ls037v7dw01_data *pd = get_panel_data(dssdev);
 	int r;
 
+	if (!pd)
+		return -EINVAL;
+
 	dssdev->panel.timings = sharp_ls_timings;
 
-	sd = kzalloc(sizeof(*sd), GFP_KERNEL);
-	if (!sd)
-		return -ENOMEM;
+	if (gpio_is_valid(pd->mo_gpio)) {
+		r = devm_gpio_request_one(&dssdev->dev, pd->mo_gpio,
+				GPIOF_OUT_INIT_LOW, "lcd MO");
+		if (r)
+			return r;
+	}
 
-	dev_set_drvdata(&dssdev->dev, sd);
+	if (gpio_is_valid(pd->lr_gpio)) {
+		r = devm_gpio_request_one(&dssdev->dev, pd->lr_gpio,
+				GPIOF_OUT_INIT_HIGH, "lcd LR");
+		if (r)
+			return r;
+	}
 
-	memset(&props, 0, sizeof(struct backlight_properties));
-	props.max_brightness = dssdev->max_backlight_level;
-	props.type = BACKLIGHT_RAW;
+	if (gpio_is_valid(pd->ud_gpio)) {
+		r = devm_gpio_request_one(&dssdev->dev, pd->ud_gpio,
+				GPIOF_OUT_INIT_HIGH, "lcd UD");
+		if (r)
+			return r;
+	}
 
-	bl = backlight_device_register("sharp-ls", &dssdev->dev, dssdev,
-			&sharp_ls_bl_ops, &props);
-	if (IS_ERR(bl)) {
-		r = PTR_ERR(bl);
-		kfree(sd);
-		return r;
+	if (gpio_is_valid(pd->resb_gpio)) {
+		r = devm_gpio_request_one(&dssdev->dev, pd->resb_gpio,
+				GPIOF_OUT_INIT_LOW, "lcd RESB");
+		if (r)
+			return r;
 	}
-	sd->bl = bl;
 
-	bl->props.fb_blank = FB_BLANK_UNBLANK;
-	bl->props.power = FB_BLANK_UNBLANK;
-	bl->props.brightness = dssdev->max_backlight_level;
-	r = sharp_ls_bl_update_status(bl);
-	if (r < 0)
-		dev_err(&dssdev->dev, "failed to set lcd brightness\n");
+	if (gpio_is_valid(pd->ini_gpio)) {
+		r = devm_gpio_request_one(&dssdev->dev, pd->ini_gpio,
+				GPIOF_OUT_INIT_LOW, "lcd INI");
+		if (r)
+			return r;
+	}
 
 	return 0;
 }
 
 static void __exit sharp_ls_panel_remove(struct omap_dss_device *dssdev)
 {
-	struct sharp_data *sd = dev_get_drvdata(&dssdev->dev);
-	struct backlight_device *bl = sd->bl;
-
-	bl->props.power = FB_BLANK_POWERDOWN;
-	sharp_ls_bl_update_status(bl);
-	backlight_device_unregister(bl);
-
-	kfree(sd);
 }
 
 static int sharp_ls_power_on(struct omap_dss_device *dssdev)
 {
+	struct panel_sharp_ls037v7dw01_data *pd = get_panel_data(dssdev);
 	int r = 0;
 
 	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
@@ -152,26 +125,29 @@ static int sharp_ls_power_on(struct omap_dss_device *dssdev)
 	/* wait couple of vsyncs until enabling the LCD */
 	msleep(50);
 
-	if (dssdev->platform_enable) {
-		r = dssdev->platform_enable(dssdev);
-		if (r)
-			goto err1;
-	}
+	if (gpio_is_valid(pd->resb_gpio))
+		gpio_set_value_cansleep(pd->resb_gpio, 1);
+
+	if (gpio_is_valid(pd->ini_gpio))
+		gpio_set_value_cansleep(pd->ini_gpio, 1);
 
 	return 0;
-err1:
-	omapdss_dpi_display_disable(dssdev);
 err0:
 	return r;
 }
 
 static void sharp_ls_power_off(struct omap_dss_device *dssdev)
 {
+	struct panel_sharp_ls037v7dw01_data *pd = get_panel_data(dssdev);
+
 	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
 		return;
 
-	if (dssdev->platform_disable)
-		dssdev->platform_disable(dssdev);
+	if (gpio_is_valid(pd->ini_gpio))
+		gpio_set_value_cansleep(pd->ini_gpio, 0);
+
+	if (gpio_is_valid(pd->resb_gpio))
+		gpio_set_value_cansleep(pd->resb_gpio, 0);
 
 	/* wait at least 5 vsyncs after disabling the LCD */
 

drivers/video/omap2/displays/panel-tfp410.c

@@ -24,7 +24,7 @@
 #include <linux/gpio.h>
 #include <drm/drm_edid.h>
 
-#include <video/omap-panel-tfp410.h>
+#include <video/omap-panel-data.h>
 
 static const struct omap_video_timings tfp410_default_timings = {
 	.x_res		= 640,

drivers/video/omap2/displays/panel-tpo-td043mtea1.c

@@ -18,6 +18,7 @@
 #include <linux/slab.h>
 
 #include <video/omapdss.h>
+#include <video/omap-panel-data.h>
 
 #define TPO_R02_MODE(x)		((x) & 7)
 #define TPO_R02_MODE_800x480	7
@@ -278,9 +279,14 @@ static const struct omap_video_timings tpo_td043_timings = {
 	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
 };
 
+static inline struct panel_tpo_td043_data
+*get_panel_data(const struct omap_dss_device *dssdev)
+{
+	return (struct panel_tpo_td043_data *) dssdev->data;
+}
+
 static int tpo_td043_power_on(struct tpo_td043_device *tpo_td043)
 {
-	int nreset_gpio = tpo_td043->nreset_gpio;
 	int r;
 
 	if (tpo_td043->powered_on)
@@ -293,8 +299,8 @@ static int tpo_td043_power_on(struct tpo_td043_device *tpo_td043)
 	/* wait for panel to stabilize */
 	msleep(160);
 
-	if (gpio_is_valid(nreset_gpio))
-		gpio_set_value(nreset_gpio, 1);
+	if (gpio_is_valid(tpo_td043->nreset_gpio))
+		gpio_set_value(tpo_td043->nreset_gpio, 1);
 
 	tpo_td043_write(tpo_td043->spi, 2,
 			TPO_R02_MODE(tpo_td043->mode) | TPO_R02_NCLK_RISING);
@@ -311,16 +317,14 @@ static int tpo_td043_power_on(struct tpo_td043_device *tpo_td043)
 
 static void tpo_td043_power_off(struct tpo_td043_device *tpo_td043)
 {
-	int nreset_gpio = tpo_td043->nreset_gpio;
-
 	if (!tpo_td043->powered_on)
 		return;
 
 	tpo_td043_write(tpo_td043->spi, 3,
 			TPO_R03_VAL_STANDBY | TPO_R03_EN_PWM);
 
-	if (gpio_is_valid(nreset_gpio))
-		gpio_set_value(nreset_gpio, 0);
+	if (gpio_is_valid(tpo_td043->nreset_gpio))
+		gpio_set_value(tpo_td043->nreset_gpio, 0);
 
 	/* wait for at least 2 vsyncs before cutting off power */
 	msleep(50);
@@ -347,12 +351,6 @@ static int tpo_td043_enable_dss(struct omap_dss_device *dssdev)
 	if (r)
 		goto err0;
 
-	if (dssdev->platform_enable) {
-		r = dssdev->platform_enable(dssdev);
-		if (r)
-			goto err1;
-	}
-
 	/*
 	 * If we are resuming from system suspend, SPI clocks might not be
 	 * enabled yet, so we'll program the LCD from SPI PM resume callback.
@@ -379,9 +377,6 @@ static void tpo_td043_disable_dss(struct omap_dss_device *dssdev)
 	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
 		return;
 
-	if (dssdev->platform_disable)
-		dssdev->platform_disable(dssdev);
-
 	omapdss_dpi_display_disable(dssdev);
 
 	if (!tpo_td043->spi_suspended)
@@ -407,7 +402,7 @@ static void tpo_td043_disable(struct omap_dss_device *dssdev)
 static int tpo_td043_probe(struct omap_dss_device *dssdev)
 {
 	struct tpo_td043_device *tpo_td043 = g_tpo_td043;
-	int nreset_gpio = dssdev->reset_gpio;
+	struct panel_tpo_td043_data *pdata = get_panel_data(dssdev);
 	int ret = 0;
 
 	dev_dbg(&dssdev->dev, "probe\n");
@@ -417,6 +412,11 @@ static int tpo_td043_probe(struct omap_dss_device *dssdev)
 		return -ENODEV;
 	}
 
+	if (!pdata)
+		return -EINVAL;
+
+	tpo_td043->nreset_gpio = pdata->nreset_gpio;
+
 	dssdev->panel.timings = tpo_td043_timings;
 	dssdev->ctrl.pixel_size = 24;
 
@@ -430,9 +430,10 @@ static int tpo_td043_probe(struct omap_dss_device *dssdev)
 		goto fail_regulator;
 	}
 
-	if (gpio_is_valid(nreset_gpio)) {
-		ret = gpio_request_one(nreset_gpio, GPIOF_OUT_INIT_LOW,
-					"lcd reset");
+	if (gpio_is_valid(tpo_td043->nreset_gpio)) {
+		ret = devm_gpio_request_one(&dssdev->dev,
+				tpo_td043->nreset_gpio, GPIOF_OUT_INIT_LOW,
+				"lcd reset");
 		if (ret < 0) {
 			dev_err(&dssdev->dev, "couldn't request reset GPIO\n");
 			goto fail_gpio_req;
@@ -457,14 +458,11 @@ static int tpo_td043_probe(struct omap_dss_device *dssdev)
 static void tpo_td043_remove(struct omap_dss_device *dssdev)
 {
 	struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&dssdev->dev);
-	int nreset_gpio = dssdev->reset_gpio;
 
 	dev_dbg(&dssdev->dev, "remove\n");
 
 	sysfs_remove_group(&dssdev->dev.kobj, &tpo_td043_attr_group);
 	regulator_put(tpo_td043->vcc_reg);
-	if (gpio_is_valid(nreset_gpio))
-		gpio_free(nreset_gpio);
 }
 
 static void tpo_td043_set_timings(struct omap_dss_device *dssdev,
@@ -527,7 +525,6 @@ static int tpo_td043_spi_probe(struct spi_device *spi)
 		return -ENOMEM;
 
 	tpo_td043->spi = spi;
-	tpo_td043->nreset_gpio = dssdev->reset_gpio;
 	dev_set_drvdata(&spi->dev, tpo_td043);
 	g_tpo_td043 = tpo_td043;
 

drivers/video/omap2/dss/apply.c

@@ -435,20 +435,27 @@ static inline struct omap_dss_device *dss_mgr_get_device(struct omap_overlay_man
 static int dss_mgr_wait_for_vsync(struct omap_overlay_manager *mgr)
 {
 	unsigned long timeout = msecs_to_jiffies(500);
-	struct omap_dss_device *dssdev = mgr->get_device(mgr);
 	u32 irq;
 	int r;
 
+	if (mgr->output == NULL)
+		return -ENODEV;
+
 	r = dispc_runtime_get();
 	if (r)
 		return r;
 
-	if (dssdev->type == OMAP_DISPLAY_TYPE_VENC)
+	switch (mgr->output->id) {
+	case OMAP_DSS_OUTPUT_VENC:
 		irq = DISPC_IRQ_EVSYNC_ODD;
-	else if (dssdev->type == OMAP_DISPLAY_TYPE_HDMI)
+		break;
+	case OMAP_DSS_OUTPUT_HDMI:
 		irq = DISPC_IRQ_EVSYNC_EVEN;
-	else
+		break;
+	default:
 		irq = dispc_mgr_get_vsync_irq(mgr->id);
+		break;
+	}
 
 	r = omap_dispc_wait_for_irq_interruptible_timeout(irq, timeout);
 

drivers/video/omap2/dss/core.c

@@ -181,10 +181,7 @@ int dss_debugfs_create_file(const char *name, void (*write)(struct seq_file *))
 	d = debugfs_create_file(name, S_IRUGO, dss_debugfs_dir,
 			write, &dss_debug_fops);
 
-	if (IS_ERR(d))
-		return PTR_ERR(d);
-
-	return 0;
+	return PTR_RET(d);
 }
 #else /* CONFIG_OMAP2_DSS_DEBUGFS */
 static inline int dss_initialize_debugfs(void)

drivers/video/omap2/dss/dispc.c

@@ -69,6 +69,8 @@ struct dispc_features {
 	u8 mgr_height_start;
 	u16 mgr_width_max;
 	u16 mgr_height_max;
+	unsigned long max_lcd_pclk;
+	unsigned long max_tv_pclk;
 	int (*calc_scaling) (unsigned long pclk, unsigned long lclk,
 		const struct omap_video_timings *mgr_timings,
 		u16 width, u16 height, u16 out_width, u16 out_height,
@@ -85,6 +87,9 @@ struct dispc_features {
 
 	/* no DISPC_IRQ_FRAMEDONETV on this SoC */
 	bool no_framedone_tv:1;
+
+	/* revert to the OMAP4 mechanism of DISPC Smart Standby operation */
+	bool mstandby_workaround:1;
 };
 
 #define DISPC_MAX_NR_FIFOS 5
@@ -97,6 +102,8 @@ static struct {
 
 	int irq;
 
+	unsigned long core_clk_rate;
+
 	u32 fifo_size[DISPC_MAX_NR_FIFOS];
 	/* maps which plane is using a fifo. fifo-id -> plane-id */
 	int fifo_assignment[DISPC_MAX_NR_FIFOS];
@@ -1584,6 +1591,7 @@ static void dispc_ovl_set_scaling(enum omap_plane plane,
 }
 
 static void dispc_ovl_set_rotation_attrs(enum omap_plane plane, u8 rotation,
+		enum omap_dss_rotation_type rotation_type,
 		bool mirroring, enum omap_color_mode color_mode)
 {
 	bool row_repeat = false;
@@ -1634,6 +1642,15 @@ static void dispc_ovl_set_rotation_attrs(enum omap_plane plane, u8 rotation,
 	if (dss_has_feature(FEAT_ROWREPEATENABLE))
 		REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane),
 			row_repeat ? 1 : 0, 18, 18);
+
+	if (color_mode == OMAP_DSS_COLOR_NV12) {
+		bool doublestride = (rotation_type == OMAP_DSS_ROT_TILER) &&
+					(rotation == OMAP_DSS_ROT_0 ||
+					rotation == OMAP_DSS_ROT_180);
+		/* DOUBLESTRIDE */
+		REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), doublestride, 22, 22);
+	}
+
 }
 
 static int color_mode_to_bpp(enum omap_color_mode color_mode)
@@ -2512,7 +2529,8 @@ static int dispc_ovl_setup_common(enum omap_plane plane,
 		dispc_ovl_set_vid_color_conv(plane, cconv);
 	}
 
-	dispc_ovl_set_rotation_attrs(plane, rotation, mirror, color_mode);
+	dispc_ovl_set_rotation_attrs(plane, rotation, rotation_type, mirror,
+			color_mode);
 
 	dispc_ovl_set_zorder(plane, caps, zorder);
 	dispc_ovl_set_pre_mult_alpha(plane, caps, pre_mult_alpha);
@@ -2823,6 +2841,15 @@ static bool _dispc_lcd_timings_ok(int hsw, int hfp, int hbp,
 	return true;
 }
 
+static bool _dispc_mgr_pclk_ok(enum omap_channel channel,
+		unsigned long pclk)
+{
+	if (dss_mgr_is_lcd(channel))
+		return pclk <= dispc.feat->max_lcd_pclk ? true : false;
+	else
+		return pclk <= dispc.feat->max_tv_pclk ? true : false;
+}
+
 bool dispc_mgr_timings_ok(enum omap_channel channel,
 		const struct omap_video_timings *timings)
 {
@@ -2830,11 +2857,13 @@ bool dispc_mgr_timings_ok(enum omap_channel channel,
 
 	timings_ok = _dispc_mgr_size_ok(timings->x_res, timings->y_res);
 
-	if (dss_mgr_is_lcd(channel))
-		timings_ok =  timings_ok && _dispc_lcd_timings_ok(timings->hsw,
-						timings->hfp, timings->hbp,
-						timings->vsw, timings->vfp,
-						timings->vbp);
+	timings_ok &= _dispc_mgr_pclk_ok(channel, timings->pixel_clock * 1000);
+
+	if (dss_mgr_is_lcd(channel)) {
+		timings_ok &= _dispc_lcd_timings_ok(timings->hsw, timings->hfp,
+				timings->hbp, timings->vsw, timings->vfp,
+				timings->vbp);
+	}
 
 	return timings_ok;
 }
@@ -2951,6 +2980,10 @@ static void dispc_mgr_set_lcd_divisor(enum omap_channel channel, u16 lck_div,
 
 	dispc_write_reg(DISPC_DIVISORo(channel),
 			FLD_VAL(lck_div, 23, 16) | FLD_VAL(pck_div, 7, 0));
+
+	if (dss_has_feature(FEAT_CORE_CLK_DIV) == false &&
+			channel == OMAP_DSS_CHANNEL_LCD)
+		dispc.core_clk_rate = dispc_fclk_rate() / lck_div;
 }
 
 static void dispc_mgr_get_lcd_divisor(enum omap_channel channel, int *lck_div,
@@ -3056,15 +3089,7 @@ unsigned long dispc_mgr_pclk_rate(enum omap_channel channel)
 
 unsigned long dispc_core_clk_rate(void)
 {
-	int lcd;
-	unsigned long fclk = dispc_fclk_rate();
-
-	if (dss_has_feature(FEAT_CORE_CLK_DIV))
-		lcd = REG_GET(DISPC_DIVISOR, 23, 16);
-	else
-		lcd = REG_GET(DISPC_DIVISORo(OMAP_DSS_CHANNEL_LCD), 23, 16);
-
-	return fclk / lcd;
+	return dispc.core_clk_rate;
 }
 
 static unsigned long dispc_plane_pclk_rate(enum omap_plane plane)
@@ -3313,67 +3338,79 @@ static void dispc_dump_regs(struct seq_file *s)
 #undef DUMPREG
 }
 
-/* with fck as input clock rate, find dispc dividers that produce req_pck */
-void dispc_find_clk_divs(unsigned long req_pck, unsigned long fck,
+/* calculate clock rates using dividers in cinfo */
+int dispc_calc_clock_rates(unsigned long dispc_fclk_rate,
 		struct dispc_clock_info *cinfo)
 {
-	u16 pcd_min, pcd_max;
-	unsigned long best_pck;
-	u16 best_ld, cur_ld;
-	u16 best_pd, cur_pd;
+	if (cinfo->lck_div > 255 || cinfo->lck_div == 0)
+		return -EINVAL;
+	if (cinfo->pck_div < 1 || cinfo->pck_div > 255)
+		return -EINVAL;
 
-	pcd_min = dss_feat_get_param_min(FEAT_PARAM_DSS_PCD);
-	pcd_max = dss_feat_get_param_max(FEAT_PARAM_DSS_PCD);
+	cinfo->lck = dispc_fclk_rate / cinfo->lck_div;
+	cinfo->pck = cinfo->lck / cinfo->pck_div;
 
-	best_pck = 0;
-	best_ld = 0;
-	best_pd = 0;
+	return 0;
+}
 
-	for (cur_ld = 1; cur_ld <= 255; ++cur_ld) {
-		unsigned long lck = fck / cur_ld;
+bool dispc_div_calc(unsigned long dispc,
+		unsigned long pck_min, unsigned long pck_max,
+		dispc_div_calc_func func, void *data)
+{
+	int lckd, lckd_start, lckd_stop;
+	int pckd, pckd_start, pckd_stop;
+	unsigned long pck, lck;
+	unsigned long lck_max;
+	unsigned long pckd_hw_min, pckd_hw_max;
+	unsigned min_fck_per_pck;
+	unsigned long fck;
 
-		for (cur_pd = pcd_min; cur_pd <= pcd_max; ++cur_pd) {
-			unsigned long pck = lck / cur_pd;
-			long old_delta = abs(best_pck - req_pck);
-			long new_delta = abs(pck - req_pck);
+#ifdef CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK
+	min_fck_per_pck = CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK;
+#else
+	min_fck_per_pck = 0;
+#endif
 
-			if (best_pck == 0 || new_delta < old_delta) {
-				best_pck = pck;
-				best_ld = cur_ld;
-				best_pd = cur_pd;
+	pckd_hw_min = dss_feat_get_param_min(FEAT_PARAM_DSS_PCD);
+	pckd_hw_max = dss_feat_get_param_max(FEAT_PARAM_DSS_PCD);
 
-				if (pck == req_pck)
-					goto found;
-			}
+	lck_max = dss_feat_get_param_max(FEAT_PARAM_DSS_FCK);
 
-			if (pck < req_pck)
-				break;
-		}
+	pck_min = pck_min ? pck_min : 1;
+	pck_max = pck_max ? pck_max : ULONG_MAX;
 
-		if (lck / pcd_min < req_pck)
-			break;
-	}
+	lckd_start = max(DIV_ROUND_UP(dispc, lck_max), 1ul);
+	lckd_stop = min(dispc / pck_min, 255ul);
 
-found:
-	cinfo->lck_div = best_ld;
-	cinfo->pck_div = best_pd;
-	cinfo->lck = fck / cinfo->lck_div;
-	cinfo->pck = cinfo->lck / cinfo->pck_div;
-}
+	for (lckd = lckd_start; lckd <= lckd_stop; ++lckd) {
+		lck = dispc / lckd;
 
-/* calculate clock rates using dividers in cinfo */
-int dispc_calc_clock_rates(unsigned long dispc_fclk_rate,
-		struct dispc_clock_info *cinfo)
-{
-	if (cinfo->lck_div > 255 || cinfo->lck_div == 0)
-		return -EINVAL;
-	if (cinfo->pck_div < 1 || cinfo->pck_div > 255)
-		return -EINVAL;
+		pckd_start = max(DIV_ROUND_UP(lck, pck_max), pckd_hw_min);
+		pckd_stop = min(lck / pck_min, pckd_hw_max);
 
-	cinfo->lck = dispc_fclk_rate / cinfo->lck_div;
-	cinfo->pck = cinfo->lck / cinfo->pck_div;
+		for (pckd = pckd_start; pckd <= pckd_stop; ++pckd) {
+			pck = lck / pckd;
 
-	return 0;
+			/*
+			 * For OMAP2/3 the DISPC fclk is the same as LCD's logic
+			 * clock, which means we're configuring DISPC fclk here
+			 * also. Thus we need to use the calculated lck. For
+			 * OMAP4+ the DISPC fclk is a separate clock.
+			 */
+			if (dss_has_feature(FEAT_CORE_CLK_DIV))
+				fck = dispc_core_clk_rate();
+			else
+				fck = lck;
+
+			if (fck < pck * min_fck_per_pck)
+				continue;
+
+			if (func(lckd, pckd, lck, pck, data))
+				return true;
+		}
+	}
+
+	return false;
 }
 
 void dispc_mgr_set_clock_div(enum omap_channel channel,
@@ -3451,6 +3488,8 @@ static void _omap_dispc_initial_config(void)
 		l = FLD_MOD(l, 1, 0, 0);
 		l = FLD_MOD(l, 1, 23, 16);
 		dispc_write_reg(DISPC_DIVISOR, l);
+
+		dispc.core_clk_rate = dispc_fclk_rate();
 	}
 
 	/* FUNCGATED */
@@ -3466,6 +3505,9 @@ static void _omap_dispc_initial_config(void)
 	dispc_configure_burst_sizes();
 
 	dispc_ovl_enable_zorder_planes();
+
+	if (dispc.feat->mstandby_workaround)
+		REG_FLD_MOD(DISPC_MSTANDBY_CTRL, 1, 0, 0);
 }
 
 static const struct dispc_features omap24xx_dispc_feats __initconst = {
@@ -3479,6 +3521,7 @@ static const struct dispc_features omap24xx_dispc_feats __initconst = {
 	.mgr_height_start	=	26,
 	.mgr_width_max		=	2048,
 	.mgr_height_max		=	2048,
+	.max_lcd_pclk		=	66500000,
 	.calc_scaling		=	dispc_ovl_calc_scaling_24xx,
 	.calc_core_clk		=	calc_core_clk_24xx,
 	.num_fifos		=	3,
@@ -3496,6 +3539,8 @@ static const struct dispc_features omap34xx_rev1_0_dispc_feats __initconst = {
 	.mgr_height_start	=	26,
 	.mgr_width_max		=	2048,
 	.mgr_height_max		=	2048,
+	.max_lcd_pclk		=	173000000,
+	.max_tv_pclk		=	59000000,
 	.calc_scaling		=	dispc_ovl_calc_scaling_34xx,
 	.calc_core_clk		=	calc_core_clk_34xx,
 	.num_fifos		=	3,
@@ -3513,6 +3558,8 @@ static const struct dispc_features omap34xx_rev3_0_dispc_feats __initconst = {
 	.mgr_height_start	=	26,
 	.mgr_width_max		=	2048,
 	.mgr_height_max		=	2048,
+	.max_lcd_pclk		=	173000000,
+	.max_tv_pclk		=	59000000,
 	.calc_scaling		=	dispc_ovl_calc_scaling_34xx,
 	.calc_core_clk		=	calc_core_clk_34xx,
 	.num_fifos		=	3,
@@ -3530,6 +3577,8 @@ static const struct dispc_features omap44xx_dispc_feats __initconst = {
 	.mgr_height_start	=	26,
 	.mgr_width_max		=	2048,
 	.mgr_height_max		=	2048,
+	.max_lcd_pclk		=	170000000,
+	.max_tv_pclk		=	185625000,
 	.calc_scaling		=	dispc_ovl_calc_scaling_44xx,
 	.calc_core_clk		=	calc_core_clk_44xx,
 	.num_fifos		=	5,
@@ -3547,10 +3596,13 @@ static const struct dispc_features omap54xx_dispc_feats __initconst = {
 	.mgr_height_start	=	27,
 	.mgr_width_max		=	4096,
 	.mgr_height_max		=	4096,
+	.max_lcd_pclk		=	170000000,
+	.max_tv_pclk		=	186000000,
 	.calc_scaling		=	dispc_ovl_calc_scaling_44xx,
 	.calc_core_clk		=	calc_core_clk_44xx,
 	.num_fifos		=	5,
 	.gfx_fifo_workaround	=	true,
+	.mstandby_workaround	=	true,
 };
 
 static int __init dispc_init_features(struct platform_device *pdev)

drivers/video/omap2/dss/dispc.h

@@ -39,6 +39,7 @@
 #define DISPC_GLOBAL_BUFFER		0x0800
 #define DISPC_CONTROL3                  0x0848
 #define DISPC_CONFIG3                   0x084C
+#define DISPC_MSTANDBY_CTRL		0x0858
 
 /* DISPC overlay registers */
 #define DISPC_OVL_BA0(n)		(DISPC_OVL_BASE(n) + \

drivers/video/omap2/dss/dss.c

@@ -473,6 +473,47 @@ int dss_calc_clock_rates(struct dss_clock_info *cinfo)
 	return 0;
 }
 
+bool dss_div_calc(unsigned long fck_min, dss_div_calc_func func, void *data)
+{
+	int fckd, fckd_start, fckd_stop;
+	unsigned long fck;
+	unsigned long fck_hw_max;
+	unsigned long fckd_hw_max;
+	unsigned long prate;
+	unsigned m;
+
+	if (dss.dpll4_m4_ck == NULL) {
+		/*
+		 * TODO: dss1_fclk can be changed on OMAP2, but the available
+		 * dividers are not continuous. We just use the pre-set rate for
+		 * now.
+		 */
+		fck = clk_get_rate(dss.dss_clk);
+		fckd = 1;
+		return func(fckd, fck, data);
+	}
+
+	fck_hw_max = dss_feat_get_param_max(FEAT_PARAM_DSS_FCK);
+	fckd_hw_max = dss.feat->fck_div_max;
+
+	m = dss.feat->dss_fck_multiplier;
+	prate = dss_get_dpll4_rate();
+
+	fck_min = fck_min ? fck_min : 1;
+
+	fckd_start = min(prate * m / fck_min, fckd_hw_max);
+	fckd_stop = max(DIV_ROUND_UP(prate * m, fck_hw_max), 1ul);
+
+	for (fckd = fckd_start; fckd >= fckd_stop; --fckd) {
+		fck = prate / fckd * m;
+
+		if (func(fckd, fck, data))
+			return true;
+	}
+
+	return false;
+}
+
 int dss_set_clock_div(struct dss_clock_info *cinfo)
 {
 	if (dss.dpll4_m4_ck) {
@@ -482,7 +523,8 @@ int dss_set_clock_div(struct dss_clock_info *cinfo)
 		prate = clk_get_rate(clk_get_parent(dss.dpll4_m4_ck));
 		DSSDBG("dpll4_m4 = %ld\n", prate);
 
-		r = clk_set_rate(dss.dpll4_m4_ck, prate / cinfo->fck_div);
+		r = clk_set_rate(dss.dpll4_m4_ck,
+				DIV_ROUND_UP(prate, cinfo->fck_div));
 		if (r)
 			return r;
 	} else {
@@ -492,7 +534,9 @@ int dss_set_clock_div(struct dss_clock_info *cinfo)
 
 	dss.dss_clk_rate = clk_get_rate(dss.dss_clk);
 
-	WARN_ONCE(dss.dss_clk_rate != cinfo->fck, "clk rate mismatch");
+	WARN_ONCE(dss.dss_clk_rate != cinfo->fck,
+			"clk rate mismatch: %lu != %lu", dss.dss_clk_rate,
+			cinfo->fck);
 
 	DSSDBG("fck = %ld (%d)\n", cinfo->fck, cinfo->fck_div);
 
@@ -542,121 +586,6 @@ static int dss_setup_default_clock(void)
 	return 0;
 }
 
-int dss_calc_clock_div(unsigned long req_pck, struct dss_clock_info *dss_cinfo,
-		struct dispc_clock_info *dispc_cinfo)
-{
-	unsigned long prate;
-	struct dss_clock_info best_dss;
-	struct dispc_clock_info best_dispc;
-
-	unsigned long fck, max_dss_fck;
-
-	u16 fck_div;
-
-	int match = 0;
-	int min_fck_per_pck;
-
-	prate = dss_get_dpll4_rate();
-
-	max_dss_fck = dss_feat_get_param_max(FEAT_PARAM_DSS_FCK);
-
-	fck = clk_get_rate(dss.dss_clk);
-	if (req_pck == dss.cache_req_pck && prate == dss.cache_prate &&
-		dss.cache_dss_cinfo.fck == fck) {
-		DSSDBG("dispc clock info found from cache.\n");
-		*dss_cinfo = dss.cache_dss_cinfo;
-		*dispc_cinfo = dss.cache_dispc_cinfo;
-		return 0;
-	}
-
-	min_fck_per_pck = CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK;
-
-	if (min_fck_per_pck &&
-		req_pck * min_fck_per_pck > max_dss_fck) {
-		DSSERR("Requested pixel clock not possible with the current "
-				"OMAP2_DSS_MIN_FCK_PER_PCK setting. Turning "
-				"the constraint off.\n");
-		min_fck_per_pck = 0;
-	}
-
-retry:
-	memset(&best_dss, 0, sizeof(best_dss));
-	memset(&best_dispc, 0, sizeof(best_dispc));
-
-	if (dss.dpll4_m4_ck == NULL) {
-		struct dispc_clock_info cur_dispc;
-		/* XXX can we change the clock on omap2? */
-		fck = clk_get_rate(dss.dss_clk);
-		fck_div = 1;
-
-		dispc_find_clk_divs(req_pck, fck, &cur_dispc);
-		match = 1;
-
-		best_dss.fck = fck;
-		best_dss.fck_div = fck_div;
-
-		best_dispc = cur_dispc;
-
-		goto found;
-	} else {
-		for (fck_div = dss.feat->fck_div_max; fck_div > 0; --fck_div) {
-			struct dispc_clock_info cur_dispc;
-
-			fck = prate / fck_div * dss.feat->dss_fck_multiplier;
-
-			if (fck > max_dss_fck)
-				continue;
-
-			if (min_fck_per_pck &&
-					fck < req_pck * min_fck_per_pck)
-				continue;
-
-			match = 1;
-
-			dispc_find_clk_divs(req_pck, fck, &cur_dispc);
-
-			if (abs(cur_dispc.pck - req_pck) <
-					abs(best_dispc.pck - req_pck)) {
-
-				best_dss.fck = fck;
-				best_dss.fck_div = fck_div;
-
-				best_dispc = cur_dispc;
-
-				if (cur_dispc.pck == req_pck)
-					goto found;
-			}
-		}
-	}
-
-found:
-	if (!match) {
-		if (min_fck_per_pck) {
-			DSSERR("Could not find suitable clock settings.\n"
-					"Turning FCK/PCK constraint off and"
-					"trying again.\n");
-			min_fck_per_pck = 0;
-			goto retry;
-		}
-
-		DSSERR("Could not find suitable clock settings.\n");
-
-		return -EINVAL;
-	}
-
-	if (dss_cinfo)
-		*dss_cinfo = best_dss;
-	if (dispc_cinfo)
-		*dispc_cinfo = best_dispc;
-
-	dss.cache_req_pck = req_pck;
-	dss.cache_prate = prate;
-	dss.cache_dss_cinfo = best_dss;
-	dss.cache_dispc_cinfo = best_dispc;
-
-	return 0;
-}
-
 void dss_set_venc_output(enum omap_dss_venc_type type)
 {
 	int l = 0;
@@ -767,13 +696,11 @@ int dss_dpi_select_source(enum omap_channel channel)
 static int dss_get_clocks(void)
 {
 	struct clk *clk;
-	int r;
 
-	clk = clk_get(&dss.pdev->dev, "fck");
+	clk = devm_clk_get(&dss.pdev->dev, "fck");
 	if (IS_ERR(clk)) {
 		DSSERR("can't get clock fck\n");
-		r = PTR_ERR(clk);
-		goto err;
+		return PTR_ERR(clk);
 	}
 
 	dss.dss_clk = clk;
@@ -782,8 +709,7 @@ static int dss_get_clocks(void)
 		clk = clk_get(NULL, dss.feat->clk_name);
 		if (IS_ERR(clk)) {
 			DSSERR("Failed to get %s\n", dss.feat->clk_name);
-			r = PTR_ERR(clk);
-			goto err;
+			return PTR_ERR(clk);
 		}
 	} else {
 		clk = NULL;
@@ -792,21 +718,12 @@ static int dss_get_clocks(void)
 	dss.dpll4_m4_ck = clk;
 
 	return 0;
-
-err:
-	if (dss.dss_clk)
-		clk_put(dss.dss_clk);
-	if (dss.dpll4_m4_ck)
-		clk_put(dss.dpll4_m4_ck);
-
-	return r;
 }
 
 static void dss_put_clocks(void)
 {
 	if (dss.dpll4_m4_ck)
 		clk_put(dss.dpll4_m4_ck);
-	clk_put(dss.dss_clk);
 }
 
 static int dss_runtime_get(void)

drivers/video/omap2/dss/dss.h

@@ -268,8 +268,9 @@ void dss_set_dac_pwrdn_bgz(bool enable);
 unsigned long dss_get_dpll4_rate(void);
 int dss_calc_clock_rates(struct dss_clock_info *cinfo);
 int dss_set_clock_div(struct dss_clock_info *cinfo);
-int dss_calc_clock_div(unsigned long req_pck, struct dss_clock_info *dss_cinfo,
-		struct dispc_clock_info *dispc_cinfo);
+
+typedef bool (*dss_div_calc_func)(int fckd, unsigned long fck, void *data);
+bool dss_div_calc(unsigned long fck_min, dss_div_calc_func func, void *data);
 
 /* SDI */
 int sdi_init_platform_driver(void) __init;
@@ -292,12 +293,21 @@ void dsi_dump_clocks(struct seq_file *s);
 void dsi_irq_handler(void);
 u8 dsi_get_pixel_size(enum omap_dss_dsi_pixel_format fmt);
 
+unsigned long dsi_get_pll_clkin(struct platform_device *dsidev);
+
+typedef bool (*dsi_pll_calc_func)(int regn, int regm, unsigned long fint,
+		unsigned long pll, void *data);
+typedef bool (*dsi_hsdiv_calc_func)(int regm_dispc, unsigned long dispc,
+		void *data);
+bool dsi_hsdiv_calc(struct platform_device *dsidev, unsigned long pll,
+		unsigned long out_min, dsi_hsdiv_calc_func func, void *data);
+bool dsi_pll_calc(struct platform_device *dsidev, unsigned long clkin,
+		unsigned long pll_min, unsigned long pll_max,
+		dsi_pll_calc_func func, void *data);
+
 unsigned long dsi_get_pll_hsdiv_dispc_rate(struct platform_device *dsidev);
 int dsi_pll_set_clock_div(struct platform_device *dsidev,
 		struct dsi_clock_info *cinfo);
-int dsi_pll_calc_clock_div_pck(struct platform_device *dsidev,
-		unsigned long req_pck, struct dsi_clock_info *cinfo,
-		struct dispc_clock_info *dispc_cinfo);
 int dsi_pll_init(struct platform_device *dsidev, bool enable_hsclk,
 		bool enable_hsdiv);
 void dsi_pll_uninit(struct platform_device *dsidev, bool disconnect_lanes);
@@ -328,14 +338,6 @@ static inline int dsi_pll_set_clock_div(struct platform_device *dsidev,
 	WARN("%s: DSI not compiled in\n", __func__);
 	return -ENODEV;
 }
-static inline int dsi_pll_calc_clock_div_pck(struct platform_device *dsidev,
-		unsigned long req_pck,
-		struct dsi_clock_info *dsi_cinfo,
-		struct dispc_clock_info *dispc_cinfo)
-{
-	WARN("%s: DSI not compiled in\n", __func__);
-	return -ENODEV;
-}
 static inline int dsi_pll_init(struct platform_device *dsidev,
 		bool enable_hsclk, bool enable_hsdiv)
 {
@@ -376,11 +378,15 @@ void dispc_enable_fifomerge(bool enable);
 void dispc_enable_gamma_table(bool enable);
 void dispc_set_loadmode(enum omap_dss_load_mode mode);
 
+typedef bool (*dispc_div_calc_func)(int lckd, int pckd, unsigned long lck,
+		unsigned long pck, void *data);
+bool dispc_div_calc(unsigned long dispc,
+		unsigned long pck_min, unsigned long pck_max,
+		dispc_div_calc_func func, void *data);
+
 bool dispc_mgr_timings_ok(enum omap_channel channel,
 		const struct omap_video_timings *timings);
 unsigned long dispc_fclk_rate(void);
-void dispc_find_clk_divs(unsigned long req_pck, unsigned long fck,
-		struct dispc_clock_info *cinfo);
 int dispc_calc_clock_rates(unsigned long dispc_fclk_rate,
 		struct dispc_clock_info *cinfo);
 

drivers/video/omap2/dss/dss_features.c

@@ -414,7 +414,7 @@ static const char * const omap5_dss_clk_source_names[] = {
 };
 
 static const struct dss_param_range omap2_dss_param_range[] = {
-	[FEAT_PARAM_DSS_FCK]			= { 0, 173000000 },
+	[FEAT_PARAM_DSS_FCK]			= { 0, 133000000 },
 	[FEAT_PARAM_DSS_PCD]			= { 2, 255 },
 	[FEAT_PARAM_DSIPLL_REGN]		= { 0, 0 },
 	[FEAT_PARAM_DSIPLL_REGM]		= { 0, 0 },
@@ -459,15 +459,15 @@ static const struct dss_param_range omap4_dss_param_range[] = {
 };
 
 static const struct dss_param_range omap5_dss_param_range[] = {
-	[FEAT_PARAM_DSS_FCK]			= { 0, 200000000 },
+	[FEAT_PARAM_DSS_FCK]			= { 0, 209250000 },
 	[FEAT_PARAM_DSS_PCD]			= { 1, 255 },
 	[FEAT_PARAM_DSIPLL_REGN]		= { 0, (1 << 8) - 1 },
 	[FEAT_PARAM_DSIPLL_REGM]		= { 0, (1 << 12) - 1 },
 	[FEAT_PARAM_DSIPLL_REGM_DISPC]		= { 0, (1 << 5) - 1 },
 	[FEAT_PARAM_DSIPLL_REGM_DSI]		= { 0, (1 << 5) - 1 },
-	[FEAT_PARAM_DSIPLL_FINT]		= { 500000, 2500000 },
+	[FEAT_PARAM_DSIPLL_FINT]		= { 150000, 52000000 },
 	[FEAT_PARAM_DSIPLL_LPDIV]		= { 0, (1 << 13) - 1 },
-	[FEAT_PARAM_DSI_FCK]			= { 0, 170000000 },
+	[FEAT_PARAM_DSI_FCK]			= { 0, 209250000 },
 	[FEAT_PARAM_DOWNSCALE]			= { 1, 4 },
 	[FEAT_PARAM_LINEWIDTH]			= { 1, 2048 },
 };

drivers/video/omap2/dss/hdmi.c

@@ -472,17 +472,12 @@ static void hdmi_compute_pll(struct omap_dss_device *dssdev, int phy,
 	 * Input clock is predivided by N + 1
 	 * out put of which is reference clk
 	 */
-	if (dssdev->clocks.hdmi.regn == 0)
-		pi->regn = HDMI_DEFAULT_REGN;
-	else
-		pi->regn = dssdev->clocks.hdmi.regn;
+
+	pi->regn = HDMI_DEFAULT_REGN;
 
 	refclk = clkin / pi->regn;
 
-	if (dssdev->clocks.hdmi.regm2 == 0)
-		pi->regm2 = HDMI_DEFAULT_REGM2;
-	else
-		pi->regm2 = dssdev->clocks.hdmi.regm2;
+	pi->regm2 = HDMI_DEFAULT_REGM2;
 
 	/*
 	 * multiplier is pixel_clk/ref_clk
@@ -804,7 +799,7 @@ static int hdmi_get_clocks(struct platform_device *pdev)
 {
 	struct clk *clk;
 
-	clk = clk_get(&pdev->dev, "sys_clk");
+	clk = devm_clk_get(&pdev->dev, "sys_clk");
 	if (IS_ERR(clk)) {
 		DSSERR("can't get sys_clk\n");
 		return PTR_ERR(clk);
@@ -815,12 +810,6 @@ static int hdmi_get_clocks(struct platform_device *pdev)
 	return 0;
 }
 
-static void hdmi_put_clocks(void)
-{
-	if (hdmi.sys_clk)
-		clk_put(hdmi.sys_clk);
-}
-
 #if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO)
 int hdmi_compute_acr(u32 sample_freq, u32 *n, u32 *cts)
 {
@@ -1017,8 +1006,6 @@ static void __init hdmi_probe_pdata(struct platform_device *pdev)
 	hdmi.ls_oe_gpio = priv->ls_oe_gpio;
 	hdmi.hpd_gpio = priv->hpd_gpio;
 
-	dssdev->channel = OMAP_DSS_CHANNEL_DIGIT;
-
 	r = hdmi_init_display(dssdev);
 	if (r) {
 		DSSERR("device %s init failed: %d\n", dssdev->name, r);
@@ -1051,6 +1038,8 @@ static void __init hdmi_init_output(struct platform_device *pdev)
 	out->pdev = pdev;
 	out->id = OMAP_DSS_OUTPUT_HDMI;
 	out->type = OMAP_DISPLAY_TYPE_HDMI;
+	out->name = "hdmi.0";
+	out->dispc_channel = OMAP_DSS_CHANNEL_DIGIT;
 
 	dss_register_output(out);
 }
@@ -1097,23 +1086,19 @@ static int __init omapdss_hdmihw_probe(struct platform_device *pdev)
 	hdmi.ip_data.pll_offset = HDMI_PLLCTRL;
 	hdmi.ip_data.phy_offset = HDMI_PHY;
 
+	hdmi_init_output(pdev);
+
 	r = hdmi_panel_init();
 	if (r) {
 		DSSERR("can't init panel\n");
-		goto err_panel_init;
+		return r;
 	}
 
 	dss_debugfs_create_file("hdmi", hdmi_dump_regs);
 
-	hdmi_init_output(pdev);
-
 	hdmi_probe_pdata(pdev);
 
 	return 0;
-
-err_panel_init:
-	hdmi_put_clocks();
-	return r;
 }
 
 static int __exit hdmi_remove_child(struct device *dev, void *data)
@@ -1135,8 +1120,6 @@ static int __exit omapdss_hdmihw_remove(struct platform_device *pdev)
 
 	pm_runtime_disable(&pdev->dev);
 
-	hdmi_put_clocks();
-
 	return 0;
 }
 

drivers/video/omap2/dss/output.c

@@ -113,6 +113,7 @@ struct omap_dss_output *omap_dss_get_output(enum omap_dss_output_id id)
 
 	return NULL;
 }
+EXPORT_SYMBOL(omap_dss_get_output);
 
 static const struct dss_mgr_ops *dss_mgr_ops;
 

drivers/video/omap2/dss/rfbi.c

@@ -1025,6 +1025,8 @@ static void __init rfbi_init_output(struct platform_device *pdev)
 	out->pdev = pdev;
 	out->id = OMAP_DSS_OUTPUT_DBI;
 	out->type = OMAP_DISPLAY_TYPE_DBI;
+	out->name = "rfbi.0";
+	out->dispc_channel = OMAP_DSS_CHANNEL_LCD;
 
 	dss_register_output(out);
 }

drivers/video/omap2/omapfb/omapfb-main.c

@@ -2388,7 +2388,7 @@ static int omapfb_init_connections(struct omapfb2_device *fbdev,
 		struct omap_dss_device *dssdev = fbdev->displays[i].dssdev;
 		struct omap_dss_output *out = dssdev->output;
 
-		mgr = omap_dss_get_overlay_manager(dssdev->channel);
+		mgr = omap_dss_get_overlay_manager(out->dispc_channel);
 
 		if (!mgr || !out)
 			continue;