OMAP3 SRAM: convert SRAM code to use macros rather than magic numbers

Convert omap3_sram_configure_core_dpll() to use macros rather than
magic numbers.
Signed-off-by: Paul Walmsley <paul@pwsan.com>

arch/arm/mach-omap2/sram34xx.S

@@ -36,6 +36,29 @@
 
 	.text
 
+/* r4 parameters */
+#define SDRC_NO_UNLOCK_DLL		0x0
+#define SDRC_UNLOCK_DLL			0x1
+
+/* SDRC_DLLA_CTRL bit settings */
+#define DLLIDLE_MASK			0x4
+
+/* SDRC_DLLA_STATUS bit settings */
+#define LOCKSTATUS_MASK			0x4
+
+/* SDRC_POWER bit settings */
+#define SRFRONIDLEREQ_MASK		0x40
+#define PWDENA_MASK			0x4
+
+/* CM_IDLEST1_CORE bit settings */
+#define ST_SDRC_MASK			0x2
+
+/* CM_ICLKEN1_CORE bit settings */
+#define EN_SDRC_MASK			0x2
+
+/* CM_CLKSEL1_PLL bit settings */
+#define CORE_DPLL_CLKOUT_DIV_SHIFT	0x1b
+
 /*
  * omap3_sram_configure_core_dpll - change DPLL3 M2 divider
  * r0 = new SDRC_RFR_CTRL register contents
@@ -57,13 +80,13 @@ ENTRY(omap3_sram_configure_core_dpll)
 	dsb				@ flush buffered writes to interconnect
 	cmp	r3, #0x2		@ if increasing SDRC clk rate,
 	blne	configure_sdrc		@ program the SDRC regs early (for RFR)
-	cmp	r4, #0x1		@ set the intended DLL state
+	cmp	r4, #SDRC_UNLOCK_DLL	@ set the intended DLL state
 	bleq	unlock_dll
 	blne	lock_dll
 	bl	sdram_in_selfrefresh	@ put SDRAM in self refresh, idle SDRC
 	bl 	configure_core_dpll	@ change the DPLL3 M2 divider
 	bl	enable_sdrc		@ take SDRC out of idle
-	cmp	r4, #0x1		@ wait for DLL status to change
+	cmp	r4, #SDRC_UNLOCK_DLL	@ wait for DLL status to change
 	bleq	wait_dll_unlock
 	blne	wait_dll_lock
 	cmp	r3, #0x1		@ if increasing SDRC clk rate,
@@ -78,33 +101,33 @@ return_to_sdram:
 unlock_dll:
 	ldr	r11, omap3_sdrc_dlla_ctrl
 	ldr	r12, [r11]
-	orr	r12, r12, #0x4
+	orr	r12, r12, #DLLIDLE_MASK
 	str	r12, [r11]		@ (no OCP barrier needed)
 	bx	lr
 lock_dll:
 	ldr	r11, omap3_sdrc_dlla_ctrl
 	ldr	r12, [r11]
-	bic	r12, r12, #0x4
+	bic	r12, r12, #DLLIDLE_MASK
 	str	r12, [r11]		@ (no OCP barrier needed)
 	bx	lr
 sdram_in_selfrefresh:
 	ldr	r11, omap3_sdrc_power	@ read the SDRC_POWER register
 	ldr	r12, [r11]		@ read the contents of SDRC_POWER
 	mov	r9, r12			@ keep a copy of SDRC_POWER bits
-	orr 	r12, r12, #0x40		@ enable self refresh on idle req
-	bic 	r12, r12, #0x4		@ clear PWDENA
+	orr 	r12, r12, #SRFRONIDLEREQ_MASK	@ enable self refresh on idle
+	bic 	r12, r12, #PWDENA_MASK	@ clear PWDENA
 	str 	r12, [r11]		@ write back to SDRC_POWER register
 	ldr	r12, [r11]		@ posted-write barrier for SDRC
 idle_sdrc:
 	ldr	r11, omap3_cm_iclken1_core	@ read the CM_ICLKEN1_CORE reg
 	ldr	r12, [r11]
-	bic	r12, r12, #0x2		@ disable iclk bit for SDRC
+	bic	r12, r12, #EN_SDRC_MASK		@ disable iclk bit for SDRC
 	str 	r12, [r11]
 wait_sdrc_idle:
 	ldr 	r11, omap3_cm_idlest1_core
 	ldr 	r12, [r11]
-	and 	r12, r12, #0x2		@ check for SDRC idle
-	cmp 	r12, #2
+	and 	r12, r12, #ST_SDRC_MASK		@ check for SDRC idle
+	cmp 	r12, #ST_SDRC_MASK
 	bne 	wait_sdrc_idle
 	bx 	lr
 configure_core_dpll:
@@ -112,7 +135,7 @@ configure_core_dpll:
 	ldr	r12, [r11]
 	ldr	r10, core_m2_mask_val	@ modify m2 for core dpll
 	and	r12, r12, r10
-	orr	r12, r12, r3, lsl #0x1B	@ r3 contains the M2 val
+	orr	r12, r12, r3, lsl #CORE_DPLL_CLKOUT_DIV_SHIFT
 	str	r12, [r11]
 	ldr	r12, [r11]		@ posted-write barrier for CM
 	bx	lr
@@ -123,12 +146,12 @@ wait_clk_stable:
 enable_sdrc:
 	ldr 	r11, omap3_cm_iclken1_core
 	ldr	r12, [r11]
-	orr 	r12, r12, #0x2		@ enable iclk bit for SDRC
+	orr 	r12, r12, #EN_SDRC_MASK		@ enable iclk bit for SDRC
 	str 	r12, [r11]
 wait_sdrc_idle1:
 	ldr 	r11, omap3_cm_idlest1_core
 	ldr	r12, [r11]
-	and 	r12, r12, #0x2
+	and 	r12, r12, #ST_SDRC_MASK
 	cmp	r12, #0
 	bne	wait_sdrc_idle1
 restore_sdrc_power_val:
@@ -138,14 +161,14 @@ restore_sdrc_power_val:
 wait_dll_lock:
 	ldr	r11, omap3_sdrc_dlla_status
 	ldr	r12, [r11]
-	and 	r12, r12, #0x4
-	cmp	r12, #0x4
+	and 	r12, r12, #LOCKSTATUS_MASK
+	cmp	r12, #LOCKSTATUS_MASK
 	bne	wait_dll_lock
 	bx	lr
 wait_dll_unlock:
 	ldr	r11, omap3_sdrc_dlla_status
 	ldr	r12, [r11]
-	and	r12, r12, #0x4
+	and	r12, r12, #LOCKSTATUS_MASK
 	cmp	r12, #0x0
 	bne	wait_dll_unlock
 	bx	lr