Commit df737895 authored by Noralf Trønnes's avatar Noralf Trønnes

drm/atomic: Move __drm_atomic_helper_disable_plane/set_config()

Prepare for moving drm_fb_helper modesetting code to drm_client.
drm_client will be linked to drm.ko, so move
__drm_atomic_helper_disable_plane() and __drm_atomic_helper_set_config()
out of drm_kms_helper.ko.

While at it, fix two checkpatch complaints:
- WARNING: Block comments use a trailing */ on a separate line
- CHECK: Alignment should match open parenthesis

v7: Declare drm_mode_set and drm_plane_state
Signed-off-by: default avatarNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: default avatarMaxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190531140117.37751-2-noralf@tronnes.org
parent d99004d7
......@@ -1179,6 +1179,174 @@ int drm_atomic_nonblocking_commit(struct drm_atomic_state *state)
}
EXPORT_SYMBOL(drm_atomic_nonblocking_commit);
/* just used from drm-client and atomic-helper: */
int __drm_atomic_helper_disable_plane(struct drm_plane *plane,
struct drm_plane_state *plane_state)
{
int ret;
ret = drm_atomic_set_crtc_for_plane(plane_state, NULL);
if (ret != 0)
return ret;
drm_atomic_set_fb_for_plane(plane_state, NULL);
plane_state->crtc_x = 0;
plane_state->crtc_y = 0;
plane_state->crtc_w = 0;
plane_state->crtc_h = 0;
plane_state->src_x = 0;
plane_state->src_y = 0;
plane_state->src_w = 0;
plane_state->src_h = 0;
return 0;
}
EXPORT_SYMBOL(__drm_atomic_helper_disable_plane);
static int update_output_state(struct drm_atomic_state *state,
struct drm_mode_set *set)
{
struct drm_device *dev = set->crtc->dev;
struct drm_crtc *crtc;
struct drm_crtc_state *new_crtc_state;
struct drm_connector *connector;
struct drm_connector_state *new_conn_state;
int ret, i;
ret = drm_modeset_lock(&dev->mode_config.connection_mutex,
state->acquire_ctx);
if (ret)
return ret;
/* First disable all connectors on the target crtc. */
ret = drm_atomic_add_affected_connectors(state, set->crtc);
if (ret)
return ret;
for_each_new_connector_in_state(state, connector, new_conn_state, i) {
if (new_conn_state->crtc == set->crtc) {
ret = drm_atomic_set_crtc_for_connector(new_conn_state,
NULL);
if (ret)
return ret;
/* Make sure legacy setCrtc always re-trains */
new_conn_state->link_status = DRM_LINK_STATUS_GOOD;
}
}
/* Then set all connectors from set->connectors on the target crtc */
for (i = 0; i < set->num_connectors; i++) {
new_conn_state = drm_atomic_get_connector_state(state,
set->connectors[i]);
if (IS_ERR(new_conn_state))
return PTR_ERR(new_conn_state);
ret = drm_atomic_set_crtc_for_connector(new_conn_state,
set->crtc);
if (ret)
return ret;
}
for_each_new_crtc_in_state(state, crtc, new_crtc_state, i) {
/*
* Don't update ->enable for the CRTC in the set_config request,
* since a mismatch would indicate a bug in the upper layers.
* The actual modeset code later on will catch any
* inconsistencies here.
*/
if (crtc == set->crtc)
continue;
if (!new_crtc_state->connector_mask) {
ret = drm_atomic_set_mode_prop_for_crtc(new_crtc_state,
NULL);
if (ret < 0)
return ret;
new_crtc_state->active = false;
}
}
return 0;
}
/* just used from drm-client and atomic-helper: */
int __drm_atomic_helper_set_config(struct drm_mode_set *set,
struct drm_atomic_state *state)
{
struct drm_crtc_state *crtc_state;
struct drm_plane_state *primary_state;
struct drm_crtc *crtc = set->crtc;
int hdisplay, vdisplay;
int ret;
crtc_state = drm_atomic_get_crtc_state(state, crtc);
if (IS_ERR(crtc_state))
return PTR_ERR(crtc_state);
primary_state = drm_atomic_get_plane_state(state, crtc->primary);
if (IS_ERR(primary_state))
return PTR_ERR(primary_state);
if (!set->mode) {
WARN_ON(set->fb);
WARN_ON(set->num_connectors);
ret = drm_atomic_set_mode_for_crtc(crtc_state, NULL);
if (ret != 0)
return ret;
crtc_state->active = false;
ret = drm_atomic_set_crtc_for_plane(primary_state, NULL);
if (ret != 0)
return ret;
drm_atomic_set_fb_for_plane(primary_state, NULL);
goto commit;
}
WARN_ON(!set->fb);
WARN_ON(!set->num_connectors);
ret = drm_atomic_set_mode_for_crtc(crtc_state, set->mode);
if (ret != 0)
return ret;
crtc_state->active = true;
ret = drm_atomic_set_crtc_for_plane(primary_state, crtc);
if (ret != 0)
return ret;
drm_mode_get_hv_timing(set->mode, &hdisplay, &vdisplay);
drm_atomic_set_fb_for_plane(primary_state, set->fb);
primary_state->crtc_x = 0;
primary_state->crtc_y = 0;
primary_state->crtc_w = hdisplay;
primary_state->crtc_h = vdisplay;
primary_state->src_x = set->x << 16;
primary_state->src_y = set->y << 16;
if (drm_rotation_90_or_270(primary_state->rotation)) {
primary_state->src_w = vdisplay << 16;
primary_state->src_h = hdisplay << 16;
} else {
primary_state->src_w = hdisplay << 16;
primary_state->src_h = vdisplay << 16;
}
commit:
ret = update_output_state(state, set);
if (ret)
return ret;
return 0;
}
EXPORT_SYMBOL(__drm_atomic_helper_set_config);
void drm_atomic_print_state(const struct drm_atomic_state *state)
{
struct drm_printer p = drm_info_printer(state->dev->dev);
......
......@@ -2844,95 +2844,6 @@ int drm_atomic_helper_disable_plane(struct drm_plane *plane,
}
EXPORT_SYMBOL(drm_atomic_helper_disable_plane);
/* just used from fb-helper and atomic-helper: */
int __drm_atomic_helper_disable_plane(struct drm_plane *plane,
struct drm_plane_state *plane_state)
{
int ret;
ret = drm_atomic_set_crtc_for_plane(plane_state, NULL);
if (ret != 0)
return ret;
drm_atomic_set_fb_for_plane(plane_state, NULL);
plane_state->crtc_x = 0;
plane_state->crtc_y = 0;
plane_state->crtc_w = 0;
plane_state->crtc_h = 0;
plane_state->src_x = 0;
plane_state->src_y = 0;
plane_state->src_w = 0;
plane_state->src_h = 0;
return 0;
}
static int update_output_state(struct drm_atomic_state *state,
struct drm_mode_set *set)
{
struct drm_device *dev = set->crtc->dev;
struct drm_crtc *crtc;
struct drm_crtc_state *new_crtc_state;
struct drm_connector *connector;
struct drm_connector_state *new_conn_state;
int ret, i;
ret = drm_modeset_lock(&dev->mode_config.connection_mutex,
state->acquire_ctx);
if (ret)
return ret;
/* First disable all connectors on the target crtc. */
ret = drm_atomic_add_affected_connectors(state, set->crtc);
if (ret)
return ret;
for_each_new_connector_in_state(state, connector, new_conn_state, i) {
if (new_conn_state->crtc == set->crtc) {
ret = drm_atomic_set_crtc_for_connector(new_conn_state,
NULL);
if (ret)
return ret;
/* Make sure legacy setCrtc always re-trains */
new_conn_state->link_status = DRM_LINK_STATUS_GOOD;
}
}
/* Then set all connectors from set->connectors on the target crtc */
for (i = 0; i < set->num_connectors; i++) {
new_conn_state = drm_atomic_get_connector_state(state,
set->connectors[i]);
if (IS_ERR(new_conn_state))
return PTR_ERR(new_conn_state);
ret = drm_atomic_set_crtc_for_connector(new_conn_state,
set->crtc);
if (ret)
return ret;
}
for_each_new_crtc_in_state(state, crtc, new_crtc_state, i) {
/* Don't update ->enable for the CRTC in the set_config request,
* since a mismatch would indicate a bug in the upper layers.
* The actual modeset code later on will catch any
* inconsistencies here. */
if (crtc == set->crtc)
continue;
if (!new_crtc_state->connector_mask) {
ret = drm_atomic_set_mode_prop_for_crtc(new_crtc_state,
NULL);
if (ret < 0)
return ret;
new_crtc_state->active = false;
}
}
return 0;
}
/**
* drm_atomic_helper_set_config - set a new config from userspace
* @set: mode set configuration
......@@ -2977,81 +2888,6 @@ int drm_atomic_helper_set_config(struct drm_mode_set *set,
}
EXPORT_SYMBOL(drm_atomic_helper_set_config);
/* just used from fb-helper and atomic-helper: */
int __drm_atomic_helper_set_config(struct drm_mode_set *set,
struct drm_atomic_state *state)
{
struct drm_crtc_state *crtc_state;
struct drm_plane_state *primary_state;
struct drm_crtc *crtc = set->crtc;
int hdisplay, vdisplay;
int ret;
crtc_state = drm_atomic_get_crtc_state(state, crtc);
if (IS_ERR(crtc_state))
return PTR_ERR(crtc_state);
primary_state = drm_atomic_get_plane_state(state, crtc->primary);
if (IS_ERR(primary_state))
return PTR_ERR(primary_state);
if (!set->mode) {
WARN_ON(set->fb);
WARN_ON(set->num_connectors);
ret = drm_atomic_set_mode_for_crtc(crtc_state, NULL);
if (ret != 0)
return ret;
crtc_state->active = false;
ret = drm_atomic_set_crtc_for_plane(primary_state, NULL);
if (ret != 0)
return ret;
drm_atomic_set_fb_for_plane(primary_state, NULL);
goto commit;
}
WARN_ON(!set->fb);
WARN_ON(!set->num_connectors);
ret = drm_atomic_set_mode_for_crtc(crtc_state, set->mode);
if (ret != 0)
return ret;
crtc_state->active = true;
ret = drm_atomic_set_crtc_for_plane(primary_state, crtc);
if (ret != 0)
return ret;
drm_mode_get_hv_timing(set->mode, &hdisplay, &vdisplay);
drm_atomic_set_fb_for_plane(primary_state, set->fb);
primary_state->crtc_x = 0;
primary_state->crtc_y = 0;
primary_state->crtc_w = hdisplay;
primary_state->crtc_h = vdisplay;
primary_state->src_x = set->x << 16;
primary_state->src_y = set->y << 16;
if (drm_rotation_90_or_270(primary_state->rotation)) {
primary_state->src_w = vdisplay << 16;
primary_state->src_h = hdisplay << 16;
} else {
primary_state->src_w = hdisplay << 16;
primary_state->src_h = vdisplay << 16;
}
commit:
ret = update_output_state(state, set);
if (ret)
return ret;
return 0;
}
/**
* drm_atomic_helper_disable_all - disable all currently active outputs
* @dev: DRM device
......
......@@ -50,7 +50,9 @@ struct drm_mode_create_dumb;
struct drm_mode_fb_cmd2;
struct drm_mode_fb_cmd;
struct drm_mode_object;
struct drm_mode_set;
struct drm_plane;
struct drm_plane_state;
struct drm_property;
struct edid;
struct kref;
......@@ -223,6 +225,11 @@ struct drm_minor;
int drm_atomic_debugfs_init(struct drm_minor *minor);
#endif
int __drm_atomic_helper_disable_plane(struct drm_plane *plane,
struct drm_plane_state *plane_state);
int __drm_atomic_helper_set_config(struct drm_mode_set *set,
struct drm_atomic_state *state);
void drm_atomic_print_state(const struct drm_atomic_state *state);
/* drm_atomic_uapi.c */
......
......@@ -117,12 +117,8 @@ int drm_atomic_helper_update_plane(struct drm_plane *plane,
struct drm_modeset_acquire_ctx *ctx);
int drm_atomic_helper_disable_plane(struct drm_plane *plane,
struct drm_modeset_acquire_ctx *ctx);
int __drm_atomic_helper_disable_plane(struct drm_plane *plane,
struct drm_plane_state *plane_state);
int drm_atomic_helper_set_config(struct drm_mode_set *set,
struct drm_modeset_acquire_ctx *ctx);
int __drm_atomic_helper_set_config(struct drm_mode_set *set,
struct drm_atomic_state *state);
int drm_atomic_helper_disable_all(struct drm_device *dev,
struct drm_modeset_acquire_ctx *ctx);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment