Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into fixes

arch/arm/mach-mx3/mach-vpr200.c

@@ -257,11 +257,16 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
 	.workaround	= FLS_USB2_WORKAROUND_ENGCM09152,
 };
 
+static int vpr200_usbh_init(struct platform_device *pdev)
+{
+	return mx35_initialize_usb_hw(pdev->id,
+			MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY);
+}
+
 /* USB HOST config */
 static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
-	.portsc		= MXC_EHCI_MODE_SERIAL,
-	.flags		= MXC_EHCI_INTERFACE_SINGLE_UNI |
-			  MXC_EHCI_INTERNAL_PHY,
+	.init = vpr200_usbh_init,
+	.portsc = MXC_EHCI_MODE_SERIAL,
 };
 
 static struct platform_device *devices[] __initdata = {

arch/arm/mach-mx5/board-mx53_loco.c

@@ -193,7 +193,7 @@ static iomux_v3_cfg_t mx53_loco_pads[] = {
 	.wakeup		= wake,					\
 }
 
-static const struct gpio_keys_button loco_buttons[] __initconst = {
+static struct gpio_keys_button loco_buttons[] = {
 	GPIO_BUTTON(MX53_LOCO_POWER, KEY_POWER, 1, "power", 0),
 	GPIO_BUTTON(MX53_LOCO_UI1, KEY_VOLUMEUP, 1, "volume-up", 0),
 	GPIO_BUTTON(MX53_LOCO_UI2, KEY_VOLUMEDOWN, 1, "volume-down", 0),

arch/arm/mach-mxs/clock-mx28.c

@@ -295,11 +295,11 @@ static int name##_set_rate(struct clk *clk, unsigned long rate)		\
 	unsigned long diff, parent_rate, calc_rate;			\
 	int i;								\
 									\
-	parent_rate = clk_get_rate(clk->parent);			\
 	div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV;	\
 	bm_busy = BM_CLKCTRL_##dr##_BUSY;				\
 									\
 	if (clk->parent == &ref_xtal_clk) {				\
+		parent_rate = clk_get_rate(clk->parent);		\
 		div = DIV_ROUND_UP(parent_rate, rate);			\
 		if (clk == &cpu_clk) {					\
 			div_max = BM_CLKCTRL_CPU_DIV_XTAL >>		\
@@ -309,6 +309,11 @@ static int name##_set_rate(struct clk *clk, unsigned long rate)		\
 		if (div == 0 || div > div_max)				\
 			return -EINVAL;					\
 	} else {							\
+		/*							\
+		 * hack alert: this block modifies clk->parent, too,	\
+		 * so the base to use it the grand parent.		\
+		 */							\
+		parent_rate = clk_get_rate(clk->parent->parent);	\
 		rate >>= PARENT_RATE_SHIFT;				\
 		parent_rate >>= PARENT_RATE_SHIFT;			\
 		diff = parent_rate;					\

arch/arm/plat-mxc/gpio.c

@@ -295,6 +295,12 @@ static int mxc_gpio_direction_output(struct gpio_chip *chip,
 	return 0;
 }
 
+/*
+ * This lock class tells lockdep that GPIO irqs are in a different
+ * category than their parents, so it won't report false recursion.
+ */
+static struct lock_class_key gpio_lock_class;
+
 int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
 {
 	int i, j;
@@ -311,6 +317,7 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
 		__raw_writel(~0, port[i].base + GPIO_ISR);
 		for (j = port[i].virtual_irq_start;
 			j < port[i].virtual_irq_start + 32; j++) {
+			irq_set_lockdep_class(j, &gpio_lock_class);
 			irq_set_chip_and_handler(j, &gpio_irq_chip,
 						 handle_level_irq);
 			set_irq_flags(j, IRQF_VALID);

arch/arm/plat-mxc/ssi-fiq.S

@@ -124,6 +124,8 @@ imx_ssi_fiq_start:
 1:
 		@ return from FIQ
 		subs	pc, lr, #4
+
+		.align
 imx_ssi_fiq_base:
 		.word 0x0
 imx_ssi_fiq_rx_buffer: