Commit e0cb1b84 authored by Yoshihiro Shimoda's avatar Yoshihiro Shimoda Committed by Stephen Boyd

clk: renesas: r8a7795: Fix SD clocks

According to the datasheet, SDn clocks are from the SDSRC clock. And
the SDSRC has a 1/2 divider. So, we should have ".sdsrc" as an internal
core clock. Otherwise, since the sdhi driver will calculate clock for
a sd card using the wrong parent clock rate, and then performance will
be not good.

Fixes: 90c073e5 ("clk: shmobile: r8a7795: Add SD divider support")
Signed-off-by: default avatarYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: default avatarDirk Behme <dirk.behme@de.bosch.com>
Tested-by: default avatarWolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarStephen Boyd <sboyd@codeaurora.org>
parent ed0ab110
......@@ -69,6 +69,7 @@ static const struct cpg_core_clk r8a7795_core_clks[] __initconst = {
DEF_FIXED(".s1", CLK_S1, CLK_PLL1_DIV2, 3, 1),
DEF_FIXED(".s2", CLK_S2, CLK_PLL1_DIV2, 4, 1),
DEF_FIXED(".s3", CLK_S3, CLK_PLL1_DIV2, 6, 1),
DEF_FIXED(".sdsrc", CLK_SDSRC, CLK_PLL1_DIV2, 2, 1),
/* Core Clock Outputs */
DEF_FIXED("ztr", R8A7795_CLK_ZTR, CLK_PLL1_DIV2, 6, 1),
......@@ -87,10 +88,10 @@ static const struct cpg_core_clk r8a7795_core_clks[] __initconst = {
DEF_FIXED("s3d2", R8A7795_CLK_S3D2, CLK_S3, 2, 1),
DEF_FIXED("s3d4", R8A7795_CLK_S3D4, CLK_S3, 4, 1),
DEF_GEN3_SD("sd0", R8A7795_CLK_SD0, CLK_PLL1_DIV2, 0x0074),
DEF_GEN3_SD("sd1", R8A7795_CLK_SD1, CLK_PLL1_DIV2, 0x0078),
DEF_GEN3_SD("sd2", R8A7795_CLK_SD2, CLK_PLL1_DIV2, 0x0268),
DEF_GEN3_SD("sd3", R8A7795_CLK_SD3, CLK_PLL1_DIV2, 0x026c),
DEF_GEN3_SD("sd0", R8A7795_CLK_SD0, CLK_SDSRC, 0x0074),
DEF_GEN3_SD("sd1", R8A7795_CLK_SD1, CLK_SDSRC, 0x0078),
DEF_GEN3_SD("sd2", R8A7795_CLK_SD2, CLK_SDSRC, 0x0268),
DEF_GEN3_SD("sd3", R8A7795_CLK_SD3, CLK_SDSRC, 0x026c),
DEF_FIXED("cl", R8A7795_CLK_CL, CLK_PLL1_DIV2, 48, 1),
DEF_FIXED("cp", R8A7795_CLK_CP, CLK_EXTAL, 2, 1),
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment