i40e: AQ thermal sensor control struct

BugLink: http://bugs.launchpad.net/bugs/1547674

Add the new AQ command and struct for managing a thermal sensor.

Change-ID: I6f5631839a0f3dca352a6c222f1269a960e2310a
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
(cherry picked from net-next commit 6774faf9)
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>

drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h

@@ -230,6 +230,7 @@ enum i40e_admin_queue_opc {
 	i40e_aqc_opc_nvm_config_read		= 0x0704,
 	i40e_aqc_opc_nvm_config_write		= 0x0705,
 	i40e_aqc_opc_oem_post_update		= 0x0720,
+	i40e_aqc_opc_thermal_sensor		= 0x0721,
 
 	/* virtualization commands */
 	i40e_aqc_opc_send_msg_to_pf		= 0x0801,
@@ -1952,6 +1953,22 @@ struct i40e_aqc_nvm_oem_post_update_buffer {
 
 I40E_CHECK_STRUCT_LEN(0x28, i40e_aqc_nvm_oem_post_update_buffer);
 
+/* Thermal Sensor (indirect 0x0721)
+ *     read or set thermal sensor configs and values
+ *     takes a sensor and command specific data buffer, not detailed here
+ */
+struct i40e_aqc_thermal_sensor {
+	u8 sensor_action;
+#define I40E_AQ_THERMAL_SENSOR_READ_CONFIG	0
+#define I40E_AQ_THERMAL_SENSOR_SET_CONFIG	1
+#define I40E_AQ_THERMAL_SENSOR_READ_TEMP	2
+	u8 reserved[7];
+	__le32	addr_high;
+	__le32	addr_low;
+};
+
+I40E_CHECK_CMD_LENGTH(i40e_aqc_thermal_sensor);
+
 /* Send to PF command (indirect 0x0801) id is only used by PF
  * Send to VF command (indirect 0x0802) id is only used by PF
  * Send to Peer PF command (indirect 0x0803)

drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h

@@ -230,6 +230,7 @@ enum i40e_admin_queue_opc {
 	i40e_aqc_opc_nvm_config_read		= 0x0704,
 	i40e_aqc_opc_nvm_config_write		= 0x0705,
 	i40e_aqc_opc_oem_post_update		= 0x0720,
+	i40e_aqc_opc_thermal_sensor		= 0x0721,
 
 	/* virtualization commands */
 	i40e_aqc_opc_send_msg_to_pf		= 0x0801,
@@ -1949,6 +1950,22 @@ struct i40e_aqc_nvm_oem_post_update_buffer {
 
 I40E_CHECK_STRUCT_LEN(0x28, i40e_aqc_nvm_oem_post_update_buffer);
 
+/* Thermal Sensor (indirect 0x0721)
+ *     read or set thermal sensor configs and values
+ *     takes a sensor and command specific data buffer, not detailed here
+ */
+struct i40e_aqc_thermal_sensor {
+	u8 sensor_action;
+#define I40E_AQ_THERMAL_SENSOR_READ_CONFIG	0
+#define I40E_AQ_THERMAL_SENSOR_SET_CONFIG	1
+#define I40E_AQ_THERMAL_SENSOR_READ_TEMP	2
+	u8 reserved[7];
+	__le32	addr_high;
+	__le32	addr_low;
+};
+
+I40E_CHECK_CMD_LENGTH(i40e_aqc_thermal_sensor);
+
 /* Send to PF command (indirect 0x0801) id is only used by PF
  * Send to VF command (indirect 0x0802) id is only used by PF
  * Send to Peer PF command (indirect 0x0803)