nfp: VF rate limit support

Add VF rate limit feature

This patch enhances the NFP driver to supports assignment of
both max_tx_rate and min_tx_rate to VFs

The template of configurations below is all supported.
e.g.
 # ip link set $DEV vf $VF_NUM max_tx_rate $RATE_VALUE
 # ip link set $DEV vf $VF_NUM min_tx_rate $RATE_VALUE
 # ip link set $DEV vf $VF_NUM max_tx_rate $RATE_VALUE \
			       min_tx_rate $RATE_VALUE
 # ip link set $DEV vf $VF_NUM min_tx_rate $RATE_VALUE \
			       max_tx_rate $RATE_VALUE

The max RATE_VALUE is limited to 0xFFFF which is about
63Gbps (using 1024 for 1G)
Signed-off-by: Bin Chen <bin.chen@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

drivers/net/ethernet/netronome/nfp/nfp_net_common.c

@@ -1903,6 +1903,7 @@ const struct net_device_ops nfp_nfd3_netdev_ops = {
 	.ndo_vlan_rx_kill_vid	= nfp_net_vlan_rx_kill_vid,
 	.ndo_set_vf_mac         = nfp_app_set_vf_mac,
 	.ndo_set_vf_vlan        = nfp_app_set_vf_vlan,
+	.ndo_set_vf_rate	= nfp_app_set_vf_rate,
 	.ndo_set_vf_spoofchk    = nfp_app_set_vf_spoofchk,
 	.ndo_set_vf_trust	= nfp_app_set_vf_trust,
 	.ndo_get_vf_config	= nfp_app_get_vf_config,

drivers/net/ethernet/netronome/nfp/nfp_net_sriov.c

@@ -142,6 +142,37 @@ int nfp_app_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan, u8 qos,
 	return nfp_net_sriov_update(app, vf, update, "vlan");
 }
 
+int nfp_app_set_vf_rate(struct net_device *netdev, int vf,
+			int min_tx_rate, int max_tx_rate)
+{
+	struct nfp_app *app = nfp_app_from_netdev(netdev);
+	u32 vf_offset, ratevalue;
+	int err;
+
+	err = nfp_net_sriov_check(app, vf, NFP_NET_VF_CFG_MB_CAP_RATE, "rate");
+	if (err)
+		return err;
+
+	if (max_tx_rate >= NFP_NET_VF_RATE_MAX ||
+	    min_tx_rate >= NFP_NET_VF_RATE_MAX) {
+		nfp_warn(app->cpp, "tx-rate exceeds %d.\n",
+			 NFP_NET_VF_RATE_MAX);
+		return -EINVAL;
+	}
+
+	vf_offset = NFP_NET_VF_CFG_MB_SZ + vf * NFP_NET_VF_CFG_SZ;
+	ratevalue = FIELD_PREP(NFP_NET_VF_CFG_MAX_RATE,
+			       max_tx_rate ? max_tx_rate :
+			       NFP_NET_VF_RATE_MAX) |
+		    FIELD_PREP(NFP_NET_VF_CFG_MIN_RATE, min_tx_rate);
+
+	writel(ratevalue,
+	       app->pf->vfcfg_tbl2 + vf_offset + NFP_NET_VF_CFG_RATE);
+
+	return nfp_net_sriov_update(app, vf, NFP_NET_VF_CFG_MB_UPD_RATE,
+				    "rate");
+}
+
 int nfp_app_set_vf_spoofchk(struct net_device *netdev, int vf, bool enable)
 {
 	struct nfp_app *app = nfp_app_from_netdev(netdev);
@@ -228,9 +259,8 @@ int nfp_app_get_vf_config(struct net_device *netdev, int vf,
 			  struct ifla_vf_info *ivi)
 {
 	struct nfp_app *app = nfp_app_from_netdev(netdev);
-	unsigned int vf_offset;
+	u32 vf_offset, mac_hi, rate;
 	u32 vlan_tag;
-	u32 mac_hi;
 	u16 mac_lo;
 	u8 flags;
 	int err;
@@ -261,5 +291,19 @@ int nfp_app_get_vf_config(struct net_device *netdev, int vf,
 	ivi->trusted = FIELD_GET(NFP_NET_VF_CFG_CTRL_TRUST, flags);
 	ivi->linkstate = FIELD_GET(NFP_NET_VF_CFG_CTRL_LINK_STATE, flags);
 
+	err = nfp_net_sriov_check(app, vf, NFP_NET_VF_CFG_MB_CAP_RATE, "rate");
+	if (!err) {
+		rate = readl(app->pf->vfcfg_tbl2 + vf_offset +
+			     NFP_NET_VF_CFG_RATE);
+
+		ivi->max_tx_rate = FIELD_GET(NFP_NET_VF_CFG_MAX_RATE, rate);
+		ivi->min_tx_rate = FIELD_GET(NFP_NET_VF_CFG_MIN_RATE, rate);
+
+		if (ivi->max_tx_rate == NFP_NET_VF_RATE_MAX)
+			ivi->max_tx_rate = 0;
+		if (ivi->min_tx_rate == NFP_NET_VF_RATE_MAX)
+			ivi->min_tx_rate = 0;
+	}
+
 	return 0;
 }

drivers/net/ethernet/netronome/nfp/nfp_net_sriov.h

@@ -20,6 +20,7 @@
 #define   NFP_NET_VF_CFG_MB_CAP_LINK_STATE		  (0x1 << 3)
 #define   NFP_NET_VF_CFG_MB_CAP_TRUST			  (0x1 << 4)
 #define   NFP_NET_VF_CFG_MB_CAP_VLAN_PROTO		  (0x1 << 5)
+#define   NFP_NET_VF_CFG_MB_CAP_RATE			  (0x1 << 6)
 #define NFP_NET_VF_CFG_MB_RET				0x2
 #define NFP_NET_VF_CFG_MB_UPD				0x4
 #define   NFP_NET_VF_CFG_MB_UPD_MAC			  (0x1 << 0)
@@ -28,6 +29,7 @@
 #define   NFP_NET_VF_CFG_MB_UPD_LINK_STATE		  (0x1 << 3)
 #define   NFP_NET_VF_CFG_MB_UPD_TRUST			  (0x1 << 4)
 #define   NFP_NET_VF_CFG_MB_UPD_VLAN_PROTO		  (0x1 << 5)
+#define   NFP_NET_VF_CFG_MB_UPD_RATE			  (0x1 << 6)
 #define NFP_NET_VF_CFG_MB_VF_NUM			0x7
 
 /* VF config entry
@@ -48,10 +50,17 @@
 #define   NFP_NET_VF_CFG_VLAN_PROT			  0xffff0000
 #define   NFP_NET_VF_CFG_VLAN_QOS			  0xe000
 #define   NFP_NET_VF_CFG_VLAN_VID			  0x0fff
+#define NFP_NET_VF_CFG_RATE				0xc
+#define   NFP_NET_VF_CFG_MIN_RATE			0x0000ffff
+#define   NFP_NET_VF_CFG_MAX_RATE			0xffff0000
+
+#define NFP_NET_VF_RATE_MAX			0xffff
 
 int nfp_app_set_vf_mac(struct net_device *netdev, int vf, u8 *mac);
 int nfp_app_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan, u8 qos,
 			__be16 vlan_proto);
+int nfp_app_set_vf_rate(struct net_device *netdev, int vf, int min_tx_rate,
+			int max_tx_rate);
 int nfp_app_set_vf_spoofchk(struct net_device *netdev, int vf, bool setting);
 int nfp_app_set_vf_trust(struct net_device *netdev, int vf, bool setting);
 int nfp_app_set_vf_link_state(struct net_device *netdev, int vf,