Commit e0eca63e authored by Vinayak Holikatti's avatar Vinayak Holikatti Committed by James Bottomley

[SCSI] ufs: Separate PCI code into glue driver

This patch separates PCI code from ufshcd.c and makes it as a
core driver module and adds a new file ufshcd-pci.c as PCI glue
driver.

[jejb: strip __devinit and devexit_p()]
Reviewed-by: default avatarArnd Bergmann <arnd@arndb.de>
Reviewed-by: default avatarNamjae Jeon <linkinjeon@gmail.com>
Reviewed-by: default avatarSubhash Jadavani <subhashj@codeaurora.org>
Tested-by: default avatarMaya Erez <merez@codeaurora.org>
Signed-off-by: default avatarVinayak Holikatti <vinholikatti@gmail.com>
Signed-off-by: default avatarSantosh Yaraganavi <santoshsy@gmail.com>
Signed-off-by: default avatarJames Bottomley <JBottomley@Parallels.com>
parent 3b1d0580
......@@ -33,7 +33,27 @@
# this program.
config SCSI_UFSHCD
tristate "Universal Flash Storage host controller driver"
depends on PCI && SCSI
tristate "Universal Flash Storage Controller Driver Core"
depends on SCSI
---help---
This is a generic driver which supports PCIe UFS Host controllers.
This selects the support for UFS devices in Linux, say Y and make
sure that you know the name of your UFS host adapter (the card
inside your computer that "speaks" the UFS protocol, also
called UFS Host Controller), because you will be asked for it.
The module will be called ufshcd.
To compile this driver as a module, choose M here and read
<file:Documentation/scsi/ufs.txt>.
However, do not compile this as a module if your root file system
(the one containing the directory /) is located on a UFS device.
config SCSI_UFSHCD_PCI
tristate "PCI bus based UFS Controller support"
depends on SCSI_UFSHCD && PCI
---help---
This selects the PCI UFS Host Controller Interface. Select this if
you have UFS Host Controller with PCI Interface.
If you have a controller with this interface, say Y or M here.
If unsure, say N.
# UFSHCD makefile
obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o
obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o
/*
* Universal Flash Storage Host controller PCI glue driver
*
* This code is based on drivers/scsi/ufs/ufshcd-pci.c
* Copyright (C) 2011-2013 Samsung India Software Operations
*
* Authors:
* Santosh Yaraganavi <santosh.sy@samsung.com>
* Vinayak Holikatti <h.vinayak@samsung.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* See the COPYING file in the top-level directory or visit
* <http://www.gnu.org/licenses/gpl-2.0.html>
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* This program is provided "AS IS" and "WITH ALL FAULTS" and
* without warranty of any kind. You are solely responsible for
* determining the appropriateness of using and distributing
* the program and assume all risks associated with your exercise
* of rights with respect to the program, including but not limited
* to infringement of third party rights, the risks and costs of
* program errors, damage to or loss of data, programs or equipment,
* and unavailability or interruption of operations. Under no
* circumstances will the contributor of this Program be liable for
* any damages of any kind arising from your use or distribution of
* this program.
*/
#include "ufshcd.h"
#include <linux/pci.h>
#ifdef CONFIG_PM
/**
* ufshcd_pci_suspend - suspend power management function
* @pdev: pointer to PCI device handle
* @state: power state
*
* Returns -ENOSYS
*/
static int ufshcd_pci_suspend(struct pci_dev *pdev, pm_message_t state)
{
/*
* TODO:
* 1. Call ufshcd_suspend
* 2. Do bus specific power management
*/
return -ENOSYS;
}
/**
* ufshcd_pci_resume - resume power management function
* @pdev: pointer to PCI device handle
*
* Returns -ENOSYS
*/
static int ufshcd_pci_resume(struct pci_dev *pdev)
{
/*
* TODO:
* 1. Call ufshcd_resume.
* 2. Do bus specific wake up
*/
return -ENOSYS;
}
#endif /* CONFIG_PM */
/**
* ufshcd_pci_shutdown - main function to put the controller in reset state
* @pdev: pointer to PCI device handle
*/
static void ufshcd_pci_shutdown(struct pci_dev *pdev)
{
ufshcd_hba_stop((struct ufs_hba *)pci_get_drvdata(pdev));
}
/**
* ufshcd_pci_remove - de-allocate PCI/SCSI host and host memory space
* data structure memory
* @pdev - pointer to PCI handle
*/
static void ufshcd_pci_remove(struct pci_dev *pdev)
{
struct ufs_hba *hba = pci_get_drvdata(pdev);
disable_irq(pdev->irq);
free_irq(pdev->irq, hba);
ufshcd_remove(hba);
pci_release_regions(pdev);
pci_set_drvdata(pdev, NULL);
pci_clear_master(pdev);
pci_disable_device(pdev);
}
/**
* ufshcd_set_dma_mask - Set dma mask based on the controller
* addressing capability
* @pdev: PCI device structure
*
* Returns 0 for success, non-zero for failure
*/
static int ufshcd_set_dma_mask(struct pci_dev *pdev)
{
int err;
if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))
&& !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)))
return 0;
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (!err)
err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
return err;
}
/**
* ufshcd_pci_probe - probe routine of the driver
* @pdev: pointer to PCI device handle
* @id: PCI device id
*
* Returns 0 on success, non-zero value on failure
*/
static int
ufshcd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct ufs_hba *hba;
void __iomem *mmio_base;
int err;
err = pci_enable_device(pdev);
if (err) {
dev_err(&pdev->dev, "pci_enable_device failed\n");
goto out_error;
}
pci_set_master(pdev);
err = pci_request_regions(pdev, UFSHCD);
if (err < 0) {
dev_err(&pdev->dev, "request regions failed\n");
goto out_disable;
}
mmio_base = pci_ioremap_bar(pdev, 0);
if (!mmio_base) {
dev_err(&pdev->dev, "memory map failed\n");
err = -ENOMEM;
goto out_release_regions;
}
err = ufshcd_set_dma_mask(pdev);
if (err) {
dev_err(&pdev->dev, "set dma mask failed\n");
goto out_iounmap;
}
err = ufshcd_init(&pdev->dev, &hba, mmio_base, pdev->irq);
if (err) {
dev_err(&pdev->dev, "Initialization failed\n");
goto out_iounmap;
}
pci_set_drvdata(pdev, hba);
return 0;
out_iounmap:
iounmap(mmio_base);
out_release_regions:
pci_release_regions(pdev);
out_disable:
pci_clear_master(pdev);
pci_disable_device(pdev);
out_error:
return err;
}
static DEFINE_PCI_DEVICE_TABLE(ufshcd_pci_tbl) = {
{ PCI_VENDOR_ID_SAMSUNG, 0xC00C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
{ } /* terminate list */
};
MODULE_DEVICE_TABLE(pci, ufshcd_pci_tbl);
static struct pci_driver ufshcd_pci_driver = {
.name = UFSHCD,
.id_table = ufshcd_pci_tbl,
.probe = ufshcd_pci_probe,
.remove = ufshcd_pci_remove,
.shutdown = ufshcd_pci_shutdown,
#ifdef CONFIG_PM
.suspend = ufshcd_pci_suspend,
.resume = ufshcd_pci_resume,
#endif
};
module_pci_driver(ufshcd_pci_driver);
MODULE_AUTHOR("Santosh Yaragnavi <santosh.sy@samsung.com>");
MODULE_AUTHOR("Vinayak Holikatti <h.vinayak@samsung.com>");
MODULE_DESCRIPTION("UFS host controller PCI glue driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(UFSHCD_DRIVER_VERSION);
/*
* Universal Flash Storage Host controller driver
* Universal Flash Storage Host controller driver Core
*
* This code is based on drivers/scsi/ufs/ufshcd.c
* Copyright (C) 2011-2013 Samsung India Software Operations
......@@ -33,35 +33,7 @@
* this program.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/workqueue.h>
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/wait.h>
#include <linux/bitops.h>
#include <asm/irq.h>
#include <asm/byteorder.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsi_dbg.h>
#include <scsi/scsi_eh.h>
#include "ufs.h"
#include "ufshci.h"
#define UFSHCD "ufshcd"
#define UFSHCD_DRIVER_VERSION "0.1"
#include "ufshcd.h"
enum {
UFSHCD_MAX_CHANNEL = 0,
......@@ -91,124 +63,6 @@ enum {
INT_AGGR_CONFIG,
};
/**
* struct uic_command - UIC command structure
* @command: UIC command
* @argument1: UIC command argument 1
* @argument2: UIC command argument 2
* @argument3: UIC command argument 3
* @cmd_active: Indicate if UIC command is outstanding
* @result: UIC command result
*/
struct uic_command {
u32 command;
u32 argument1;
u32 argument2;
u32 argument3;
int cmd_active;
int result;
};
/**
* struct ufs_hba - per adapter private structure
* @mmio_base: UFSHCI base register address
* @ucdl_base_addr: UFS Command Descriptor base address
* @utrdl_base_addr: UTP Transfer Request Descriptor base address
* @utmrdl_base_addr: UTP Task Management Descriptor base address
* @ucdl_dma_addr: UFS Command Descriptor DMA address
* @utrdl_dma_addr: UTRDL DMA address
* @utmrdl_dma_addr: UTMRDL DMA address
* @host: Scsi_Host instance of the driver
* @dev: device handle
* @lrb: local reference block
* @outstanding_tasks: Bits representing outstanding task requests
* @outstanding_reqs: Bits representing outstanding transfer requests
* @capabilities: UFS Controller Capabilities
* @nutrs: Transfer Request Queue depth supported by controller
* @nutmrs: Task Management Queue depth supported by controller
* @ufs_version: UFS Version to which controller complies
* @irq: Irq number of the controller
* @active_uic_cmd: handle of active UIC command
* @ufshcd_tm_wait_queue: wait queue for task management
* @tm_condition: condition variable for task management
* @ufshcd_state: UFSHCD states
* @int_enable_mask: Interrupt Mask Bits
* @uic_workq: Work queue for UIC completion handling
* @feh_workq: Work queue for fatal controller error handling
* @errors: HBA errors
*/
struct ufs_hba {
void __iomem *mmio_base;
/* Virtual memory reference */
struct utp_transfer_cmd_desc *ucdl_base_addr;
struct utp_transfer_req_desc *utrdl_base_addr;
struct utp_task_req_desc *utmrdl_base_addr;
/* DMA memory reference */
dma_addr_t ucdl_dma_addr;
dma_addr_t utrdl_dma_addr;
dma_addr_t utmrdl_dma_addr;
struct Scsi_Host *host;
struct device *dev;
struct ufshcd_lrb *lrb;
unsigned long outstanding_tasks;
unsigned long outstanding_reqs;
u32 capabilities;
int nutrs;
int nutmrs;
u32 ufs_version;
unsigned int irq;
struct uic_command active_uic_cmd;
wait_queue_head_t ufshcd_tm_wait_queue;
unsigned long tm_condition;
u32 ufshcd_state;
u32 int_enable_mask;
/* Work Queues */
struct work_struct uic_workq;
struct work_struct feh_workq;
/* HBA Errors */
u32 errors;
};
/**
* struct ufshcd_lrb - local reference block
* @utr_descriptor_ptr: UTRD address of the command
* @ucd_cmd_ptr: UCD address of the command
* @ucd_rsp_ptr: Response UPIU address for this command
* @ucd_prdt_ptr: PRDT address of the command
* @cmd: pointer to SCSI command
* @sense_buffer: pointer to sense buffer address of the SCSI command
* @sense_bufflen: Length of the sense buffer
* @scsi_status: SCSI status of the command
* @command_type: SCSI, UFS, Query.
* @task_tag: Task tag of the command
* @lun: LUN of the command
*/
struct ufshcd_lrb {
struct utp_transfer_req_desc *utr_descriptor_ptr;
struct utp_upiu_cmd *ucd_cmd_ptr;
struct utp_upiu_rsp *ucd_rsp_ptr;
struct ufshcd_sg_entry *ucd_prdt_ptr;
struct scsi_cmnd *cmd;
u8 *sense_buffer;
unsigned int sense_bufflen;
int scsi_status;
int command_type;
int task_tag;
unsigned int lun;
};
/**
* ufshcd_get_ufs_version - Get the UFS version supported by the HBA
* @hba - Pointer to adapter instance
......@@ -421,15 +275,6 @@ static void ufshcd_enable_run_stop_reg(struct ufs_hba *hba)
REG_UTP_TRANSFER_REQ_LIST_RUN_STOP));
}
/**
* ufshcd_hba_stop - Send controller to reset state
* @hba: per adapter instance
*/
static inline void ufshcd_hba_stop(struct ufs_hba *hba)
{
writel(CONTROLLER_DISABLE, (hba->mmio_base + REG_CONTROLLER_ENABLE));
}
/**
* ufshcd_hba_start - Start controller initialization sequence
* @hba: per adapter instance
......@@ -1680,15 +1525,6 @@ static struct scsi_host_template ufshcd_driver_template = {
.can_queue = UFSHCD_CAN_QUEUE,
};
/**
* ufshcd_pci_shutdown - main function to put the controller in reset state
* @pdev: pointer to PCI device handle
*/
static void ufshcd_pci_shutdown(struct pci_dev *pdev)
{
ufshcd_hba_stop((struct ufs_hba *)pci_get_drvdata(pdev));
}
/**
* ufshcd_suspend - suspend power management function
* @hba: per adapter instance
......@@ -1732,43 +1568,6 @@ int ufshcd_resume(struct ufs_hba *hba)
}
EXPORT_SYMBOL_GPL(ufshcd_resume);
#ifdef CONFIG_PM
/**
* ufshcd_pci_suspend - suspend power management function
* @pdev: pointer to PCI device handle
* @state: power state
*
* Returns -ENOSYS
*/
static int ufshcd_pci_suspend(struct pci_dev *pdev, pm_message_t state)
{
/*
* TODO:
* 1. Call ufshcd_suspend
* 2. Do bus specific power management
*/
return -ENOSYS;
}
/**
* ufshcd_pci_resume - resume power management function
* @pdev: pointer to PCI device handle
*
* Returns -ENOSYS
*/
static int ufshcd_pci_resume(struct pci_dev *pdev)
{
/*
* TODO:
* 1. Call ufshcd_resume
* 2. Do bus specific wake up
*/
return -ENOSYS;
}
#endif /* CONFIG_PM */
/**
* ufshcd_hba_free - free allocated memory for
* host memory space data structures
......@@ -1798,44 +1597,6 @@ void ufshcd_remove(struct ufs_hba *hba)
}
EXPORT_SYMBOL_GPL(ufshcd_remove);
/**
* ufshcd_pci_remove - de-allocate PCI/SCSI host and host memory space
* data structure memory
* @pdev - pointer to PCI handle
*/
static void ufshcd_pci_remove(struct pci_dev *pdev)
{
struct ufs_hba *hba = pci_get_drvdata(pdev);
disable_irq(pdev->irq);
free_irq(pdev->irq, hba);
ufshcd_remove(hba);
pci_release_regions(pdev);
pci_set_drvdata(pdev, NULL);
pci_clear_master(pdev);
pci_disable_device(pdev);
}
/**
* ufshcd_set_dma_mask - Set dma mask based on the controller
* addressing capability
* @pdev: PCI device structure
*
* Returns 0 for success, non-zero for failure
*/
static int ufshcd_set_dma_mask(struct pci_dev *pdev)
{
int err;
if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))
&& !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)))
return 0;
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (!err)
err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
return err;
}
/**
* ufshcd_init - Driver initialization routine
* @dev: pointer to device handle
......@@ -1952,90 +1713,8 @@ int ufshcd_init(struct device *dev, struct ufs_hba **hba_handle,
}
EXPORT_SYMBOL_GPL(ufshcd_init);
/**
* ufshcd_pci_probe - probe routine of the driver
* @pdev: pointer to PCI device handle
* @id: PCI device id
*
* Returns 0 on success, non-zero value on failure
*/
static int ufshcd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct ufs_hba *hba;
void __iomem *mmio_base;
int err;
err = pci_enable_device(pdev);
if (err) {
dev_err(&pdev->dev, "pci_enable_device failed\n");
goto out_error;
}
pci_set_master(pdev);
err = pci_request_regions(pdev, UFSHCD);
if (err < 0) {
dev_err(&pdev->dev, "request regions failed\n");
goto out_disable;
}
mmio_base = pci_ioremap_bar(pdev, 0);
if (!mmio_base) {
dev_err(&pdev->dev, "memory map failed\n");
err = -ENOMEM;
goto out_release_regions;
}
err = ufshcd_set_dma_mask(pdev);
if (err) {
dev_err(&pdev->dev, "set dma mask failed\n");
goto out_iounmap;
}
err = ufshcd_init(&pdev->dev, &hba, mmio_base, pdev->irq);
if (err) {
dev_err(&pdev->dev, "Initialization failed\n");
goto out_iounmap;
}
pci_set_drvdata(pdev, hba);
return 0;
out_iounmap:
iounmap(mmio_base);
out_release_regions:
pci_release_regions(pdev);
out_disable:
pci_clear_master(pdev);
pci_disable_device(pdev);
out_error:
return err;
}
static DEFINE_PCI_DEVICE_TABLE(ufshcd_pci_tbl) = {
{ PCI_VENDOR_ID_SAMSUNG, 0xC00C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
{ } /* terminate list */
};
MODULE_DEVICE_TABLE(pci, ufshcd_pci_tbl);
static struct pci_driver ufshcd_pci_driver = {
.name = UFSHCD,
.id_table = ufshcd_pci_tbl,
.probe = ufshcd_pci_probe,
.remove = ufshcd_pci_remove,
.shutdown = ufshcd_pci_shutdown,
#ifdef CONFIG_PM
.suspend = ufshcd_pci_suspend,
.resume = ufshcd_pci_resume,
#endif
};
module_pci_driver(ufshcd_pci_driver);
MODULE_AUTHOR("Santosh Yaragnavi <santosh.sy@samsung.com>");
MODULE_AUTHOR("Vinayak Holikatti <h.vinayak@samsung.com>");
MODULE_DESCRIPTION("Generic UFS host controller driver");
MODULE_DESCRIPTION("Generic UFS host controller driver Core");
MODULE_LICENSE("GPL");
MODULE_VERSION(UFSHCD_DRIVER_VERSION);
/*
* Universal Flash Storage Host controller driver
*
* This code is based on drivers/scsi/ufs/ufshcd.h
* Copyright (C) 2011-2013 Samsung India Software Operations
*
* Authors:
* Santosh Yaraganavi <santosh.sy@samsung.com>
* Vinayak Holikatti <h.vinayak@samsung.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* See the COPYING file in the top-level directory or visit
* <http://www.gnu.org/licenses/gpl-2.0.html>
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* This program is provided "AS IS" and "WITH ALL FAULTS" and
* without warranty of any kind. You are solely responsible for
* determining the appropriateness of using and distributing
* the program and assume all risks associated with your exercise
* of rights with respect to the program, including but not limited
* to infringement of third party rights, the risks and costs of
* program errors, damage to or loss of data, programs or equipment,
* and unavailability or interruption of operations. Under no
* circumstances will the contributor of this Program be liable for
* any damages of any kind arising from your use or distribution of
* this program.
*/
#ifndef _UFSHCD_H
#define _UFSHCD_H
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/workqueue.h>
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/wait.h>
#include <linux/bitops.h>
#include <linux/pm_runtime.h>
#include <linux/clk.h>
#include <asm/irq.h>
#include <asm/byteorder.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsi_dbg.h>
#include <scsi/scsi_eh.h>
#include "ufs.h"
#include "ufshci.h"
#define UFSHCD "ufshcd"
#define UFSHCD_DRIVER_VERSION "0.2"
/**
* struct uic_command - UIC command structure
* @command: UIC command
* @argument1: UIC command argument 1
* @argument2: UIC command argument 2
* @argument3: UIC command argument 3
* @cmd_active: Indicate if UIC command is outstanding
* @result: UIC command result
*/
struct uic_command {
u32 command;
u32 argument1;
u32 argument2;
u32 argument3;
int cmd_active;
int result;
};
/**
* struct ufshcd_lrb - local reference block
* @utr_descriptor_ptr: UTRD address of the command
* @ucd_cmd_ptr: UCD address of the command
* @ucd_rsp_ptr: Response UPIU address for this command
* @ucd_prdt_ptr: PRDT address of the command
* @cmd: pointer to SCSI command
* @sense_buffer: pointer to sense buffer address of the SCSI command
* @sense_bufflen: Length of the sense buffer
* @scsi_status: SCSI status of the command
* @command_type: SCSI, UFS, Query.
* @task_tag: Task tag of the command
* @lun: LUN of the command
*/
struct ufshcd_lrb {
struct utp_transfer_req_desc *utr_descriptor_ptr;
struct utp_upiu_cmd *ucd_cmd_ptr;
struct utp_upiu_rsp *ucd_rsp_ptr;
struct ufshcd_sg_entry *ucd_prdt_ptr;
struct scsi_cmnd *cmd;
u8 *sense_buffer;
unsigned int sense_bufflen;
int scsi_status;
int command_type;
int task_tag;
unsigned int lun;
};
/**
* struct ufs_hba - per adapter private structure
* @mmio_base: UFSHCI base register address
* @ucdl_base_addr: UFS Command Descriptor base address
* @utrdl_base_addr: UTP Transfer Request Descriptor base address
* @utmrdl_base_addr: UTP Task Management Descriptor base address
* @ucdl_dma_addr: UFS Command Descriptor DMA address
* @utrdl_dma_addr: UTRDL DMA address
* @utmrdl_dma_addr: UTMRDL DMA address
* @host: Scsi_Host instance of the driver
* @dev: device handle
* @lrb: local reference block
* @outstanding_tasks: Bits representing outstanding task requests
* @outstanding_reqs: Bits representing outstanding transfer requests
* @capabilities: UFS Controller Capabilities
* @nutrs: Transfer Request Queue depth supported by controller
* @nutmrs: Task Management Queue depth supported by controller
* @ufs_version: UFS Version to which controller complies
* @irq: Irq number of the controller
* @active_uic_cmd: handle of active UIC command
* @ufshcd_tm_wait_queue: wait queue for task management
* @tm_condition: condition variable for task management
* @ufshcd_state: UFSHCD states
* @int_enable_mask: Interrupt Mask Bits
* @uic_workq: Work queue for UIC completion handling
* @feh_workq: Work queue for fatal controller error handling
* @errors: HBA errors
*/
struct ufs_hba {
void __iomem *mmio_base;
/* Virtual memory reference */
struct utp_transfer_cmd_desc *ucdl_base_addr;
struct utp_transfer_req_desc *utrdl_base_addr;
struct utp_task_req_desc *utmrdl_base_addr;
/* DMA memory reference */
dma_addr_t ucdl_dma_addr;
dma_addr_t utrdl_dma_addr;
dma_addr_t utmrdl_dma_addr;
struct Scsi_Host *host;
struct device *dev;
struct ufshcd_lrb *lrb;
unsigned long outstanding_tasks;
unsigned long outstanding_reqs;
u32 capabilities;
int nutrs;
int nutmrs;
u32 ufs_version;
unsigned int irq;
struct uic_command active_uic_cmd;
wait_queue_head_t ufshcd_tm_wait_queue;
unsigned long tm_condition;
u32 ufshcd_state;
u32 int_enable_mask;
/* Work Queues */
struct work_struct uic_workq;
struct work_struct feh_workq;
/* HBA Errors */
u32 errors;
};
int ufshcd_init(struct device *, struct ufs_hba ** , void __iomem * ,
unsigned int);
void ufshcd_remove(struct ufs_hba *);
/**
* ufshcd_hba_stop - Send controller to reset state
* @hba: per adapter instance
*/
static inline void ufshcd_hba_stop(struct ufs_hba *hba)
{
writel(CONTROLLER_DISABLE, (hba->mmio_base + REG_CONTROLLER_ENABLE));
}
#endif /* End of Header */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment