rtl8xxxu: First stab at adding IQK calibration for 8723bu parts

The 8723bu also has it's own IQK calibration process. This is similar
in flow, but still different enough to warrent it's own
implementation, at least for now.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c

@@ -3510,6 +3510,91 @@ static bool rtl8xxxu_simularity_compare(struct rtl8xxxu_priv *priv,
 	return false;
 }
 
+static bool rtl8723bu_simularity_compare(struct rtl8xxxu_priv *priv,
+					 int result[][8], int c1, int c2)
+{
+	u32 i, j, diff, simubitmap, bound = 0;
+	int candidate[2] = {-1, -1};	/* for path A and path B */
+	int tmp1, tmp2;
+	bool retval = true;
+
+	if (priv->tx_paths > 1)
+		bound = 8;
+	else
+		bound = 4;
+
+	simubitmap = 0;
+
+	for (i = 0; i < bound; i++) {
+		if (i & 1) {
+			if ((result[c1][i] & 0x00000200))
+				tmp1 = result[c1][i] | 0xfffffc00;
+			else
+				tmp1 = result[c1][i];
+
+			if ((result[c2][i]& 0x00000200))
+				tmp2 = result[c2][i] | 0xfffffc00;
+			else
+				tmp2 = result[c2][i];
+		} else {
+			tmp1 = result[c1][i];
+			tmp2 = result[c2][i];
+		}
+
+		diff = (tmp1 > tmp2) ? (tmp1 - tmp2) : (tmp2 - tmp1);
+
+		if (diff > MAX_TOLERANCE) {
+			if ((i == 2 || i == 6) && !simubitmap) {
+				if (result[c1][i] + result[c1][i + 1] == 0)
+					candidate[(i / 4)] = c2;
+				else if (result[c2][i] + result[c2][i + 1] == 0)
+					candidate[(i / 4)] = c1;
+				else
+					simubitmap = simubitmap | (1 << i);
+			} else {
+				simubitmap = simubitmap | (1 << i);
+			}
+		}
+	}
+
+	if (simubitmap == 0) {
+		for (i = 0; i < (bound / 4); i++) {
+			if (candidate[i] >= 0) {
+				for (j = i * 4; j < (i + 1) * 4 - 2; j++)
+					result[3][j] = result[candidate[i]][j];
+				retval = false;
+			}
+		}
+		return retval;
+	} else {
+		if (!(simubitmap & 0x03)) {
+			/* path A TX OK */
+			for (i = 0; i < 2; i++)
+				result[3][i] = result[c1][i];
+		}
+
+		if (!(simubitmap & 0x0c)) {
+			/* path A RX OK */
+			for (i = 2; i < 4; i++)
+				result[3][i] = result[c1][i];
+		}
+
+		if (!(simubitmap & 0x30) && priv->tx_paths > 1) {
+			/* path B RX OK */
+			for (i = 4; i < 6; i++)
+				result[3][i] = result[c1][i];
+		}
+
+		if (!(simubitmap & 0x30) && priv->tx_paths > 1) {
+			/* path B RX OK */
+			for (i = 6; i < 8; i++)
+				result[3][i] = result[c1][i];
+		}
+	}
+
+	return false;
+}
+
 static void
 rtl8xxxu_save_mac_regs(struct rtl8xxxu_priv *priv, const u32 *reg, u32 *backup)
 {
@@ -3652,37 +3737,602 @@ static int rtl8xxxu_iqk_path_b(struct rtl8xxxu_priv *priv)
 
 	mdelay(1);
 
-	/* Check failed */
-	reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
-	reg_eb4 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B);
-	reg_ebc = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B);
-	reg_ec4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_B_2);
-	reg_ecc = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_B_2);
+	/* Check failed */
+	reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
+	reg_eb4 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B);
+	reg_ebc = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B);
+	reg_ec4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_B_2);
+	reg_ecc = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_B_2);
+
+	if (!(reg_eac & BIT(31)) &&
+	    ((reg_eb4 & 0x03ff0000) != 0x01420000) &&
+	    ((reg_ebc & 0x03ff0000) != 0x00420000))
+		result |= 0x01;
+	else
+		goto out;
+
+	if (!(reg_eac & BIT(30)) &&
+	    (((reg_ec4 & 0x03ff0000) >> 16) != 0x132) &&
+	    (((reg_ecc & 0x03ff0000) >> 16) != 0x36))
+		result |= 0x02;
+	else
+		dev_warn(&priv->udev->dev, "%s: Path B RX IQK failed!\n",
+			 __func__);
+out:
+	return result;
+}
+
+static int rtl8723bu_iqk_path_a(struct rtl8xxxu_priv *priv)
+{
+	u32 reg_eac, reg_e94, reg_e9c, path_sel, val32;
+	int result = 0;
+
+	path_sel = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH);
+
+	/*
+	 * Leave IQK mode
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0x000000ff;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	/*
+	 * Enable path A PA in TX IQK mode
+	 */
+	val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT);
+	val32 |= 0x80000;
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x20000);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0003f);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xc7f87);
+
+	/*
+	 * Tx IQK setting
+	 */
+	rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00);
+	rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
+
+	/* path-A IQK setting */
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c);
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c);
+
+	rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x821403ea);
+	rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28110000);
+	rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82110000);
+	rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28110000);
+
+	/* LO calibration setting */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x00462911);
+
+	/*
+	 * Enter IQK mode
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0x000000ff;
+	val32 |= 0x80800000;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	/*
+	 * The vendor driver indicates the USB module is always using
+	 * S0S1 path 1 for the 8723bu. This may be different for 8192eu
+	 */
+	if (priv->rf_paths > 1)
+		rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000000);
+	else
+		rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000280);
+
+	/*
+	 * Bit 12 seems to be BT_GRANT, and is only found in the 8723bu.
+	 * No trace of this in the 8192eu or 8188eu vendor drivers.
+	 */
+	rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00000800);
+
+	/* One shot, path A LOK & IQK */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
+
+	mdelay(1);
+
+	/* Restore Ant Path */
+	rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel);
+#ifdef RTL8723BU_BT
+	/* GNT_BT = 1 */
+	rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00001800);
+#endif
+
+	/*
+	 * Leave IQK mode
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0x000000ff;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	/* Check failed */
+	reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
+	reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A);
+	reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A);
+
+	val32 = (reg_e9c >> 16) & 0x3ff;
+	if (val32 & 0x200)
+		val32 = 0x400 - val32;
+
+	if (!(reg_eac & BIT(28)) &&
+	    ((reg_e94 & 0x03ff0000) != 0x01420000) &&
+	    ((reg_e9c & 0x03ff0000) != 0x00420000) &&
+	    ((reg_e94 & 0x03ff0000)  < 0x01100000) &&
+	    ((reg_e94 & 0x03ff0000)  > 0x00f00000) &&
+	    val32 < 0xf)
+		result |= 0x01;
+	else	/* If TX not OK, ignore RX */
+		goto out;
+
+out:
+	return result;
+}
+
+static int rtl8723bu_rx_iqk_path_a(struct rtl8xxxu_priv *priv)
+{
+	u32 reg_ea4, reg_eac, reg_e94, reg_e9c, path_sel, val32;
+	int result = 0;
+
+	path_sel = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH);
+
+	/*
+	 * Leave IQK mode
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0x000000ff;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	/*
+	 * Enable path A PA in TX IQK mode
+	 */
+	val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT);
+	val32 |= 0x80000;
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7fb7);
+
+	/*
+	 * Tx IQK setting
+	 */
+	rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00);
+	rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
+
+	/* path-A IQK setting */
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c);
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c);
+
+	rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160ff0);
+	rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28110000);
+	rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82110000);
+	rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28110000);
+
+	/* LO calibration setting */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a911);
+
+	/*
+	 * Enter IQK mode
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0x000000ff;
+	val32 |= 0x80800000;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	/*
+	 * The vendor driver indicates the USB module is always using
+	 * S0S1 path 1 for the 8723bu. This may be different for 8192eu
+	 */
+	if (priv->rf_paths > 1)
+		rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000000);
+	else
+		rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000280);
+
+	/*
+	 * Bit 12 seems to be BT_GRANT, and is only found in the 8723bu.
+	 * No trace of this in the 8192eu or 8188eu vendor drivers.
+	 */
+	rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00000800);
+
+	/* One shot, path A LOK & IQK */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
+
+	mdelay(1);
+
+	/* Restore Ant Path */
+	rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel);
+#ifdef RTL8723BU_BT
+	/* GNT_BT = 1 */
+	rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00001800);
+#endif
+
+	/*
+	 * Leave IQK mode
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0x000000ff;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	/* Check failed */
+	reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
+	reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A);
+	reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A);
+
+	val32 = (reg_e9c >> 16) & 0x3ff;
+	if (val32 & 0x200)
+		val32 = 0x400 - val32;
+
+	if (!(reg_eac & BIT(28)) &&
+	    ((reg_e94 & 0x03ff0000) != 0x01420000) &&
+	    ((reg_e9c & 0x03ff0000) != 0x00420000) &&
+	    ((reg_e94 & 0x03ff0000)  < 0x01100000) &&
+	    ((reg_e94 & 0x03ff0000)  > 0x00f00000) &&
+	    val32 < 0xf)
+		result |= 0x01;
+	else	/* If TX not OK, ignore RX */
+		goto out;
+
+	val32 = 0x80007c00 | (reg_e94 &0x3ff0000) |
+		((reg_e9c & 0x3ff0000) >> 16);
+	rtl8xxxu_write32(priv, REG_TX_IQK, val32);
+
+	/*
+	 * Modify RX IQK mode
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0x000000ff;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+	val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT);
+	val32 |= 0x80000;
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7d77);
+
+	/*
+	 * PA, PAD setting
+	 */
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0xf80);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_55, 0x4021f);
+
+	/*
+	 * RX IQK setting
+	 */
+	rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
+
+	/* path-A IQK setting */
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x18008c1c);
+	rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c);
+	rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c);
+
+	rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82110000);
+	rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x2816001f);
+	rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82110000);
+	rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28110000);
+
+	/* LO calibration setting */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a8d1);
+
+	/*
+	 * Enter IQK mode
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0x000000ff;
+	val32 |= 0x80800000;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	if (priv->rf_paths > 1)
+		rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000000);
+	else
+		rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000280);
+
+	/*
+	 * Disable BT
+	 */
+	rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00000800);
+
+	/* One shot, path A LOK & IQK */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
+	rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
+
+	mdelay(1);
+
+	/* Restore Ant Path */
+	rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel);
+#ifdef RTL8723BU_BT
+	/* GNT_BT = 1 */
+	rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00001800);
+#endif
+
+	/*
+	 * Leave IQK mode
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0x000000ff;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	/* Check failed */
+	reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
+	reg_ea4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_A_2);
+
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x780);
+
+	val32 = (reg_eac >> 16) & 0x3ff;
+	if (val32 & 0x200)
+		val32 = 0x400 - val32;
+
+	if (!(reg_eac & BIT(27)) &&
+	    ((reg_ea4 & 0x03ff0000) != 0x01320000) &&
+	    ((reg_eac & 0x03ff0000) != 0x00360000) &&
+	    ((reg_ea4 & 0x03ff0000)  < 0x01100000) &&
+	    ((reg_ea4 & 0x03ff0000)  > 0x00f00000) &&
+	    val32 < 0xf)
+		result |= 0x02;
+	else	/* If TX not OK, ignore RX */
+		goto out;
+out:
+	return result;
+}
+
+#ifdef RTL8723BU_PATH_B
+static int rtl8723bu_iqk_path_b(struct rtl8xxxu_priv *priv)
+{
+	u32 reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc, path_sel;
+	int result = 0;
+
+	path_sel = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH);
+
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0x000000ff;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+	/* One shot, path B LOK & IQK */
+	rtl8xxxu_write32(priv, REG_IQK_AGC_CONT, 0x00000002);
+	rtl8xxxu_write32(priv, REG_IQK_AGC_CONT, 0x00000000);
+
+	mdelay(1);
+
+	/* Check failed */
+	reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
+	reg_eb4 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B);
+	reg_ebc = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B);
+	reg_ec4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_B_2);
+	reg_ecc = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_B_2);
+
+	if (!(reg_eac & BIT(31)) &&
+	    ((reg_eb4 & 0x03ff0000) != 0x01420000) &&
+	    ((reg_ebc & 0x03ff0000) != 0x00420000))
+		result |= 0x01;
+	else
+		goto out;
+
+	if (!(reg_eac & BIT(30)) &&
+	    (((reg_ec4 & 0x03ff0000) >> 16) != 0x132) &&
+	    (((reg_ecc & 0x03ff0000) >> 16) != 0x36))
+		result |= 0x02;
+	else
+		dev_warn(&priv->udev->dev, "%s: Path B RX IQK failed!\n",
+			 __func__);
+out:
+	return result;
+}
+#endif
+
+static void rtl8xxxu_phy_iqcalibrate(struct rtl8xxxu_priv *priv,
+				     int result[][8], int t)
+{
+	struct device *dev = &priv->udev->dev;
+	u32 i, val32;
+	int path_a_ok, path_b_ok;
+	int retry = 2;
+	const u32 adda_regs[RTL8XXXU_ADDA_REGS] = {
+		REG_FPGA0_XCD_SWITCH_CTRL, REG_BLUETOOTH,
+		REG_RX_WAIT_CCA, REG_TX_CCK_RFON,
+		REG_TX_CCK_BBON, REG_TX_OFDM_RFON,
+		REG_TX_OFDM_BBON, REG_TX_TO_RX,
+		REG_TX_TO_TX, REG_RX_CCK,
+		REG_RX_OFDM, REG_RX_WAIT_RIFS,
+		REG_RX_TO_RX, REG_STANDBY,
+		REG_SLEEP, REG_PMPD_ANAEN
+	};
+	const u32 iqk_mac_regs[RTL8XXXU_MAC_REGS] = {
+		REG_TXPAUSE, REG_BEACON_CTRL,
+		REG_BEACON_CTRL_1, REG_GPIO_MUXCFG
+	};
+	const u32 iqk_bb_regs[RTL8XXXU_BB_REGS] = {
+		REG_OFDM0_TRX_PATH_ENABLE, REG_OFDM0_TR_MUX_PAR,
+		REG_FPGA0_XCD_RF_SW_CTRL, REG_CONFIG_ANT_A, REG_CONFIG_ANT_B,
+		REG_FPGA0_XAB_RF_SW_CTRL, REG_FPGA0_XA_RF_INT_OE,
+		REG_FPGA0_XB_RF_INT_OE, REG_FPGA0_RF_MODE
+	};
+
+	/*
+	 * Note: IQ calibration must be performed after loading
+	 *       PHY_REG.txt , and radio_a, radio_b.txt
+	 */
+
+	if (t == 0) {
+		/* Save ADDA parameters, turn Path A ADDA on */
+		rtl8xxxu_save_regs(priv, adda_regs, priv->adda_backup,
+				   RTL8XXXU_ADDA_REGS);
+		rtl8xxxu_save_mac_regs(priv, iqk_mac_regs, priv->mac_backup);
+		rtl8xxxu_save_regs(priv, iqk_bb_regs,
+				   priv->bb_backup, RTL8XXXU_BB_REGS);
+	}
+
+	rtl8xxxu_path_adda_on(priv, adda_regs, true);
+
+	if (t == 0) {
+		val32 = rtl8xxxu_read32(priv, REG_FPGA0_XA_HSSI_PARM1);
+		if (val32 & FPGA0_HSSI_PARM1_PI)
+			priv->pi_enabled = 1;
+	}
+
+	if (!priv->pi_enabled) {
+		/* Switch BB to PI mode to do IQ Calibration. */
+		rtl8xxxu_write32(priv, REG_FPGA0_XA_HSSI_PARM1, 0x01000100);
+		rtl8xxxu_write32(priv, REG_FPGA0_XB_HSSI_PARM1, 0x01000100);
+	}
+
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
+	val32 &= ~FPGA_RF_MODE_CCK;
+	rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
+
+	rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, 0x03a05600);
+	rtl8xxxu_write32(priv, REG_OFDM0_TR_MUX_PAR, 0x000800e4);
+	rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_SW_CTRL, 0x22204000);
+
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_XAB_RF_SW_CTRL);
+	val32 |= (FPGA0_RF_PAPE | (FPGA0_RF_PAPE << FPGA0_RF_BD_CTRL_SHIFT));
+	rtl8xxxu_write32(priv, REG_FPGA0_XAB_RF_SW_CTRL, val32);
+
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_XA_RF_INT_OE);
+	val32 &= ~BIT(10);
+	rtl8xxxu_write32(priv, REG_FPGA0_XA_RF_INT_OE, val32);
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_XB_RF_INT_OE);
+	val32 &= ~BIT(10);
+	rtl8xxxu_write32(priv, REG_FPGA0_XB_RF_INT_OE, val32);
+
+	if (priv->tx_paths > 1) {
+		rtl8xxxu_write32(priv, REG_FPGA0_XA_LSSI_PARM, 0x00010000);
+		rtl8xxxu_write32(priv, REG_FPGA0_XB_LSSI_PARM, 0x00010000);
+	}
+
+	/* MAC settings */
+	rtl8xxxu_mac_calibration(priv, iqk_mac_regs, priv->mac_backup);
+
+	/* Page B init */
+	rtl8xxxu_write32(priv, REG_CONFIG_ANT_A, 0x00080000);
+
+	if (priv->tx_paths > 1)
+		rtl8xxxu_write32(priv, REG_CONFIG_ANT_B, 0x00080000);
+
+	/* IQ calibration setting */
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
+	rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00);
+	rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
+
+	for (i = 0; i < retry; i++) {
+		path_a_ok = rtl8xxxu_iqk_path_a(priv);
+		if (path_a_ok == 0x03) {
+			val32 = rtl8xxxu_read32(priv,
+						REG_TX_POWER_BEFORE_IQK_A);
+			result[t][0] = (val32 >> 16) & 0x3ff;
+			val32 = rtl8xxxu_read32(priv,
+						REG_TX_POWER_AFTER_IQK_A);
+			result[t][1] = (val32 >> 16) & 0x3ff;
+			val32 = rtl8xxxu_read32(priv,
+						REG_RX_POWER_BEFORE_IQK_A_2);
+			result[t][2] = (val32 >> 16) & 0x3ff;
+			val32 = rtl8xxxu_read32(priv,
+						REG_RX_POWER_AFTER_IQK_A_2);
+			result[t][3] = (val32 >> 16) & 0x3ff;
+			break;
+		} else if (i == (retry - 1) && path_a_ok == 0x01) {
+			/* TX IQK OK */
+			dev_dbg(dev, "%s: Path A IQK Only Tx Success!!\n",
+				__func__);
+
+			val32 = rtl8xxxu_read32(priv,
+						REG_TX_POWER_BEFORE_IQK_A);
+			result[t][0] = (val32 >> 16) & 0x3ff;
+			val32 = rtl8xxxu_read32(priv,
+						REG_TX_POWER_AFTER_IQK_A);
+			result[t][1] = (val32 >> 16) & 0x3ff;
+		}
+	}
+
+	if (!path_a_ok)
+		dev_dbg(dev, "%s: Path A IQK failed!\n", __func__);
+
+	if (priv->tx_paths > 1) {
+		/*
+		 * Path A into standby
+		 */
+		rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x0);
+		rtl8xxxu_write32(priv, REG_FPGA0_XA_LSSI_PARM, 0x00010000);
+		rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
+
+		/* Turn Path B ADDA on */
+		rtl8xxxu_path_adda_on(priv, adda_regs, false);
+
+		for (i = 0; i < retry; i++) {
+			path_b_ok = rtl8xxxu_iqk_path_b(priv);
+			if (path_b_ok == 0x03) {
+				val32 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B);
+				result[t][4] = (val32 >> 16) & 0x3ff;
+				val32 = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B);
+				result[t][5] = (val32 >> 16) & 0x3ff;
+				val32 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_B_2);
+				result[t][6] = (val32 >> 16) & 0x3ff;
+				val32 = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_B_2);
+				result[t][7] = (val32 >> 16) & 0x3ff;
+				break;
+			} else if (i == (retry - 1) && path_b_ok == 0x01) {
+				/* TX IQK OK */
+				val32 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B);
+				result[t][4] = (val32 >> 16) & 0x3ff;
+				val32 = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B);
+				result[t][5] = (val32 >> 16) & 0x3ff;
+			}
+		}
+
+		if (!path_b_ok)
+			dev_dbg(dev, "%s: Path B IQK failed!\n", __func__);
+	}
+
+	/* Back to BB mode, load original value */
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0);
+
+	if (t) {
+		if (!priv->pi_enabled) {
+			/*
+			 * Switch back BB to SI mode after finishing
+			 * IQ Calibration
+			 */
+			val32 = 0x01000000;
+			rtl8xxxu_write32(priv, REG_FPGA0_XA_HSSI_PARM1, val32);
+			rtl8xxxu_write32(priv, REG_FPGA0_XB_HSSI_PARM1, val32);
+		}
+
+		/* Reload ADDA power saving parameters */
+		rtl8xxxu_restore_regs(priv, adda_regs, priv->adda_backup,
+				      RTL8XXXU_ADDA_REGS);
+
+		/* Reload MAC parameters */
+		rtl8xxxu_restore_mac_regs(priv, iqk_mac_regs, priv->mac_backup);
+
+		/* Reload BB parameters */
+		rtl8xxxu_restore_regs(priv, iqk_bb_regs,
+				      priv->bb_backup, RTL8XXXU_BB_REGS);
+
+		/* Restore RX initial gain */
+		rtl8xxxu_write32(priv, REG_FPGA0_XA_LSSI_PARM, 0x00032ed3);
 
-	if (!(reg_eac & BIT(31)) &&
-	    ((reg_eb4 & 0x03ff0000) != 0x01420000) &&
-	    ((reg_ebc & 0x03ff0000) != 0x00420000))
-		result |= 0x01;
-	else
-		goto out;
+		if (priv->tx_paths > 1) {
+			rtl8xxxu_write32(priv, REG_FPGA0_XB_LSSI_PARM,
+					 0x00032ed3);
+		}
 
-	if (!(reg_eac & BIT(30)) &&
-	    (((reg_ec4 & 0x03ff0000) >> 16) != 0x132) &&
-	    (((reg_ecc & 0x03ff0000) >> 16) != 0x36))
-		result |= 0x02;
-	else
-		dev_warn(&priv->udev->dev, "%s: Path B RX IQK failed!\n",
-			 __func__);
-out:
-	return result;
+		/* Load 0xe30 IQC default value */
+		rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x01008c00);
+		rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x01008c00);
+	}
 }
 
-static void rtl8xxxu_phy_iqcalibrate(struct rtl8xxxu_priv *priv,
+static void rtl8723bu_phy_iqcalibrate(struct rtl8xxxu_priv *priv,
 				      int result[][8], int t)
 {
 	struct device *dev = &priv->udev->dev;
 	u32 i, val32;
-	int path_a_ok, path_b_ok;
+	int path_a_ok /*, path_b_ok */;
 	int retry = 2;
 	const u32 adda_regs[RTL8XXXU_ADDA_REGS] = {
 		REG_FPGA0_XCD_SWITCH_CTRL, REG_BLUETOOTH,
@@ -3704,6 +4354,8 @@ static void rtl8xxxu_phy_iqcalibrate(struct rtl8xxxu_priv *priv,
 		REG_FPGA0_XAB_RF_SW_CTRL, REG_FPGA0_XA_RF_INT_OE,
 		REG_FPGA0_XB_RF_INT_OE, REG_FPGA0_RF_MODE
 	};
+	u8 xa_agc = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1) & 0xff;
+	u8 xb_agc = rtl8xxxu_read32(priv, REG_OFDM0_XB_AGC_CORE1) & 0xff;
 
 	/*
 	 * Note: IQ calibration must be performed after loading
@@ -3721,96 +4373,114 @@ static void rtl8xxxu_phy_iqcalibrate(struct rtl8xxxu_priv *priv,
 
 	rtl8xxxu_path_adda_on(priv, adda_regs, true);
 
-	if (t == 0) {
-		val32 = rtl8xxxu_read32(priv, REG_FPGA0_XA_HSSI_PARM1);
-		if (val32 & FPGA0_HSSI_PARM1_PI)
-			priv->pi_enabled = 1;
-	}
-
-	if (!priv->pi_enabled) {
-		/* Switch BB to PI mode to do IQ Calibration. */
-		rtl8xxxu_write32(priv, REG_FPGA0_XA_HSSI_PARM1, 0x01000100);
-		rtl8xxxu_write32(priv, REG_FPGA0_XB_HSSI_PARM1, 0x01000100);
-	}
+	/* MAC settings */
+	rtl8xxxu_mac_calibration(priv, iqk_mac_regs, priv->mac_backup);
 
-	val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
-	val32 &= ~FPGA_RF_MODE_CCK;
-	rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
+	val32 = rtl8xxxu_read32(priv, REG_CCK0_AFE_SETTING);
+	val32 |= 0x0f000000;
+	rtl8xxxu_write32(priv, REG_CCK0_AFE_SETTING, val32);
 
 	rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, 0x03a05600);
 	rtl8xxxu_write32(priv, REG_OFDM0_TR_MUX_PAR, 0x000800e4);
 	rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_SW_CTRL, 0x22204000);
 
-	val32 = rtl8xxxu_read32(priv, REG_FPGA0_XAB_RF_SW_CTRL);
-	val32 |= (FPGA0_RF_PAPE | (FPGA0_RF_PAPE << FPGA0_RF_BD_CTRL_SHIFT));
-	rtl8xxxu_write32(priv, REG_FPGA0_XAB_RF_SW_CTRL, val32);
+#ifdef RTL8723BU_PATH_B
+	/* Set RF mode to standby Path B */
+	if (priv->tx_paths > 1)
+		rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_AC, 0x10000);
+#endif
 
-	val32 = rtl8xxxu_read32(priv, REG_FPGA0_XA_RF_INT_OE);
-	val32 &= ~BIT(10);
-	rtl8xxxu_write32(priv, REG_FPGA0_XA_RF_INT_OE, val32);
-	val32 = rtl8xxxu_read32(priv, REG_FPGA0_XB_RF_INT_OE);
-	val32 &= ~BIT(10);
-	rtl8xxxu_write32(priv, REG_FPGA0_XB_RF_INT_OE, val32);
+#if 0
+	/* Page B init */
+	rtl8xxxu_write32(priv, REG_CONFIG_ANT_A, 0x0f600000);
 
-	if (priv->tx_paths > 1) {
-		rtl8xxxu_write32(priv, REG_FPGA0_XA_LSSI_PARM, 0x00010000);
-		rtl8xxxu_write32(priv, REG_FPGA0_XB_LSSI_PARM, 0x00010000);
-	}
+	if (priv->tx_paths > 1)
+		rtl8xxxu_write32(priv, REG_CONFIG_ANT_B, 0x0f600000);
+#endif
 
-	/* MAC settings */
-	rtl8xxxu_mac_calibration(priv, iqk_mac_regs, priv->mac_backup);
+	/*
+	 * RX IQ calibration setting for 8723B D cut large current issue
+	 * when leaving IPS
+	 */
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0x000000ff;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
 
-	/* Page B init */
-	rtl8xxxu_write32(priv, REG_CONFIG_ANT_A, 0x00080000);
+	val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT);
+	val32 |= 0x80000;
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32);
 
-	if (priv->tx_paths > 1)
-		rtl8xxxu_write32(priv, REG_CONFIG_ANT_B, 0x00080000);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7fb7);
 
-	/* IQ calibration setting */
-	rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
-	rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00);
-	rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
+	val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED);
+	val32 |= 0x20;
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED, val32);
+
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_43, 0x60fbd);
 
 	for (i = 0; i < retry; i++) {
-		path_a_ok = rtl8xxxu_iqk_path_a(priv);
-		if (path_a_ok == 0x03) {
+		path_a_ok = rtl8723bu_iqk_path_a(priv);
+		if (path_a_ok == 0x01) {
+			val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+			val32 &= 0x000000ff;
+			rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+
+#if 0 /* Only needed in restore case, we may need this when going to suspend */
+			priv->RFCalibrateInfo.TxLOK[RF_A] =
+				rtl8xxxu_read_rfreg(priv, RF_A,
+						    RF6052_REG_TXM_IDAC);
+#endif
+
 			val32 = rtl8xxxu_read32(priv,
 						REG_TX_POWER_BEFORE_IQK_A);
 			result[t][0] = (val32 >> 16) & 0x3ff;
 			val32 = rtl8xxxu_read32(priv,
 						REG_TX_POWER_AFTER_IQK_A);
 			result[t][1] = (val32 >> 16) & 0x3ff;
+
+			break;
+		}
+	}
+
+	if (!path_a_ok)
+		dev_dbg(dev, "%s: Path A TX IQK failed!\n", __func__);
+
+	for (i = 0; i < retry; i++) {
+		path_a_ok = rtl8723bu_rx_iqk_path_a(priv);
+		if (path_a_ok == 0x03) {
 			val32 = rtl8xxxu_read32(priv,
 						REG_RX_POWER_BEFORE_IQK_A_2);
 			result[t][2] = (val32 >> 16) & 0x3ff;
 			val32 = rtl8xxxu_read32(priv,
 						REG_RX_POWER_AFTER_IQK_A_2);
 			result[t][3] = (val32 >> 16) & 0x3ff;
-			break;
-		} else if (i == (retry - 1) && path_a_ok == 0x01) {
-			/* TX IQK OK */
-			dev_dbg(dev, "%s: Path A IQK Only Tx Success!!\n",
-				__func__);
 
-			val32 = rtl8xxxu_read32(priv,
-						REG_TX_POWER_BEFORE_IQK_A);
-			result[t][0] = (val32 >> 16) & 0x3ff;
-			val32 = rtl8xxxu_read32(priv,
-						REG_TX_POWER_AFTER_IQK_A);
-			result[t][1] = (val32 >> 16) & 0x3ff;
+			break;
 		}
 	}
 
 	if (!path_a_ok)
-		dev_dbg(dev, "%s: Path A IQK failed!\n", __func__);
+		dev_dbg(dev, "%s: Path A RX IQK failed!\n", __func__);
 
 	if (priv->tx_paths > 1) {
+#if 1
+		dev_warn(dev, "%s: Path B not supported\n", __func__);
+#else
+
 		/*
 		 * Path A into standby
 		 */
-		rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x0);
-		rtl8xxxu_write32(priv, REG_FPGA0_XA_LSSI_PARM, 0x00010000);
-		rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
+		val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+		val32 &= 0x000000ff;
+		rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
+		rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, 0x10000);
+
+		val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+		val32 &= 0x000000ff;
+		val32 |= 0x80800000;
+		rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
 
 		/* Turn Path B ADDA on */
 		rtl8xxxu_path_adda_on(priv, adda_regs, false);
@@ -3822,38 +4492,37 @@ static void rtl8xxxu_phy_iqcalibrate(struct rtl8xxxu_priv *priv,
 				result[t][4] = (val32 >> 16) & 0x3ff;
 				val32 = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B);
 				result[t][5] = (val32 >> 16) & 0x3ff;
-				val32 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_B_2);
+				break;
+			}
+		}
+
+		if (!path_b_ok)
+			dev_dbg(dev, "%s: Path B IQK failed!\n", __func__);
+
+		for (i = 0; i < retry; i++) {
+			path_b_ok = rtl8723bu_rx_iqk_path_b(priv);
+			if (path_a_ok == 0x03) {
+				val32 = rtl8xxxu_read32(priv,
+							REG_RX_POWER_BEFORE_IQK_B_2);
 				result[t][6] = (val32 >> 16) & 0x3ff;
-				val32 = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_B_2);
+				val32 = rtl8xxxu_read32(priv,
+							REG_RX_POWER_AFTER_IQK_B_2);
 				result[t][7] = (val32 >> 16) & 0x3ff;
 				break;
-			} else if (i == (retry - 1) && path_b_ok == 0x01) {
-				/* TX IQK OK */
-				val32 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B);
-				result[t][4] = (val32 >> 16) & 0x3ff;
-				val32 = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B);
-				result[t][5] = (val32 >> 16) & 0x3ff;
 			}
 		}
 
 		if (!path_b_ok)
-			dev_dbg(dev, "%s: Path B IQK failed!\n", __func__);
+			dev_dbg(dev, "%s: Path B RX IQK failed!\n", __func__);
+#endif
 	}
 
 	/* Back to BB mode, load original value */
-	rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0);
+	val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
+	val32 &= 0x000000ff;
+	rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
 
 	if (t) {
-		if (!priv->pi_enabled) {
-			/*
-			 * Switch back BB to SI mode after finishing
-			 * IQ Calibration
-			 */
-			val32 = 0x01000000;
-			rtl8xxxu_write32(priv, REG_FPGA0_XA_HSSI_PARM1, val32);
-			rtl8xxxu_write32(priv, REG_FPGA0_XB_HSSI_PARM1, val32);
-		}
-
 		/* Reload ADDA power saving parameters */
 		rtl8xxxu_restore_regs(priv, adda_regs, priv->adda_backup,
 				      RTL8XXXU_ADDA_REGS);
@@ -3866,11 +4535,18 @@ static void rtl8xxxu_phy_iqcalibrate(struct rtl8xxxu_priv *priv,
 				      priv->bb_backup, RTL8XXXU_BB_REGS);
 
 		/* Restore RX initial gain */
-		rtl8xxxu_write32(priv, REG_FPGA0_XA_LSSI_PARM, 0x00032ed3);
+		val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1);
+		val32 &= 0xffffff00;
+		rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32 | 0x50);
+		rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32 | xa_agc);
 
 		if (priv->tx_paths > 1) {
-			rtl8xxxu_write32(priv, REG_FPGA0_XB_LSSI_PARM,
-					 0x00032ed3);
+			val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_AGC_CORE1);
+			val32 &= 0xffffff00;
+			rtl8xxxu_write32(priv, REG_OFDM0_XB_AGC_CORE1,
+					 val32 | 0x50);
+			rtl8xxxu_write32(priv, REG_OFDM0_XB_AGC_CORE1,
+					 val32 | xb_agc);
 		}
 
 		/* Load 0xe30 IQC default value */
@@ -3893,7 +4569,7 @@ static void rtl8xxxu_prepare_calibrate(struct rtl8xxxu_priv *priv, u8 start)
 	rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.bt_wlan_calibration));
 }
 
-static void rtl8723a_phy_iq_calibrate(struct rtl8xxxu_priv *priv)
+static void rtl8723au_phy_iq_calibrate(struct rtl8xxxu_priv *priv)
 {
 	struct device *dev = &priv->udev->dev;
 	int result[4][8];	/* last is final result */
@@ -3997,6 +4673,133 @@ static void rtl8723a_phy_iq_calibrate(struct rtl8xxxu_priv *priv)
 	rtl8xxxu_prepare_calibrate(priv, 0);
 }
 
+static void rtl8723bu_phy_iq_calibrate(struct rtl8xxxu_priv *priv)
+{
+	struct device *dev = &priv->udev->dev;
+	int result[4][8];	/* last is final result */
+	int i, candidate;
+	bool path_a_ok, path_b_ok;
+	u32 reg_e94, reg_e9c, reg_ea4, reg_eac;
+	u32 reg_eb4, reg_ebc, reg_ec4, reg_ecc;
+	u32 val32, bt_control;
+	s32 reg_tmp = 0;
+	bool simu;
+
+	rtl8xxxu_prepare_calibrate(priv, 1);
+
+	memset(result, 0, sizeof(result));
+	candidate = -1;
+
+	path_a_ok = false;
+	path_b_ok = false;
+
+	bt_control = rtl8xxxu_read32(priv, REG_BT_CONTROL_8723BU);
+
+	for (i = 0; i < 3; i++) {
+		rtl8723bu_phy_iqcalibrate(priv, result, i);
+
+		if (i == 1) {
+			simu = rtl8723bu_simularity_compare(priv, result, 0, 1);
+			if (simu) {
+				candidate = 0;
+				break;
+			}
+		}
+
+		if (i == 2) {
+			simu = rtl8723bu_simularity_compare(priv, result, 0, 2);
+			if (simu) {
+				candidate = 0;
+				break;
+			}
+
+			simu = rtl8723bu_simularity_compare(priv, result, 1, 2);
+			if (simu) {
+				candidate = 1;
+			} else {
+				for (i = 0; i < 8; i++)
+					reg_tmp += result[3][i];
+
+				if (reg_tmp)
+					candidate = 3;
+				else
+					candidate = -1;
+			}
+		}
+	}
+
+	for (i = 0; i < 4; i++) {
+		reg_e94 = result[i][0];
+		reg_e9c = result[i][1];
+		reg_ea4 = result[i][2];
+		reg_eac = result[i][3];
+		reg_eb4 = result[i][4];
+		reg_ebc = result[i][5];
+		reg_ec4 = result[i][6];
+		reg_ecc = result[i][7];
+	}
+
+	if (candidate >= 0) {
+		reg_e94 = result[candidate][0];
+		priv->rege94 =  reg_e94;
+		reg_e9c = result[candidate][1];
+		priv->rege9c = reg_e9c;
+		reg_ea4 = result[candidate][2];
+		reg_eac = result[candidate][3];
+		reg_eb4 = result[candidate][4];
+		priv->regeb4 = reg_eb4;
+		reg_ebc = result[candidate][5];
+		priv->regebc = reg_ebc;
+		reg_ec4 = result[candidate][6];
+		reg_ecc = result[candidate][7];
+		dev_dbg(dev, "%s: candidate is %x\n", __func__, candidate);
+		dev_dbg(dev,
+			"%s: e94 =%x e9c=%x ea4=%x eac=%x eb4=%x ebc=%x ec4=%x "
+			"ecc=%x\n ", __func__, reg_e94, reg_e9c,
+			reg_ea4, reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc);
+		path_a_ok = true;
+		path_b_ok = true;
+	} else {
+		reg_e94 = reg_eb4 = priv->rege94 = priv->regeb4 = 0x100;
+		reg_e9c = reg_ebc = priv->rege9c = priv->regebc = 0x0;
+	}
+
+	if (reg_e94 && candidate >= 0)
+		rtl8xxxu_fill_iqk_matrix_a(priv, path_a_ok, result,
+					   candidate, (reg_ea4 == 0));
+
+	if (priv->tx_paths > 1 && reg_eb4)
+		rtl8xxxu_fill_iqk_matrix_b(priv, path_b_ok, result,
+					   candidate, (reg_ec4 == 0));
+
+	rtl8xxxu_save_regs(priv, rtl8723au_iqk_phy_iq_bb_reg,
+			   priv->bb_recovery_backup, RTL8XXXU_BB_REGS);
+
+	rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, bt_control);
+
+	val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT);
+	val32 |= 0x80000;
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x18000);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f);
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xe6177);
+	val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED);
+	val32 |= 0x20;
+	rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED, val32);
+	rtl8xxxu_write_rfreg(priv, RF_A, 0x43, 0x300bd);
+
+	if (priv->rf_paths > 1) {
+		dev_dbg(dev, "%s: beware 2T not yet supported\n", __func__);
+#ifdef RTL8723BU_PATH_B
+		if (RF_Path == 0x0)	//S1
+			ODM_SetIQCbyRFpath(pDM_Odm, 0);
+		else	//S0
+			ODM_SetIQCbyRFpath(pDM_Odm, 1);
+#endif
+	}
+	rtl8xxxu_prepare_calibrate(priv, 0);
+}
+
 static void rtl8723a_phy_lc_calibrate(struct rtl8xxxu_priv *priv)
 {
 	u32 val32;
@@ -4995,7 +5798,7 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
 
 	rtl8xxxu_write16(priv, REG_FAST_EDCA_CTRL, 0);
 
-	rtl8723a_phy_iq_calibrate(priv);
+	priv->fops->phy_iq_calibrate(priv);
 
 	/*
 	 * This should enable thermal meter
@@ -6536,6 +7339,7 @@ static struct rtl8xxxu_fileops rtl8723au_fops = {
 	.load_firmware = rtl8723au_load_firmware,
 	.power_on = rtl8723au_power_on,
 	.llt_init = rtl8xxxu_init_llt_table,
+	.phy_iq_calibrate = rtl8723au_phy_iq_calibrate,
 	.writeN_block_size = 1024,
 	.mbox_ext_reg = REG_HMBOX_EXT_0,
 	.mbox_ext_width = 2,
@@ -6551,6 +7355,7 @@ static struct rtl8xxxu_fileops rtl8723bu_fops = {
 	.power_on = rtl8723au_power_on,
 	.llt_init = rtl8xxxu_auto_llt_table,
 	.phy_init_antenna_selection = rtl8723bu_phy_init_antenna_selection,
+	.phy_iq_calibrate = rtl8723bu_phy_iq_calibrate,
 	.writeN_block_size = 1024,
 	.mbox_ext_reg = REG_HMBOX_EXT0_8723B,
 	.mbox_ext_width = 4,
@@ -6567,6 +7372,7 @@ static struct rtl8xxxu_fileops rtl8192cu_fops = {
 	.load_firmware = rtl8192cu_load_firmware,
 	.power_on = rtl8192cu_power_on,
 	.llt_init = rtl8xxxu_init_llt_table,
+	.phy_iq_calibrate = rtl8723au_phy_iq_calibrate,
 	.writeN_block_size = 128,
 	.mbox_ext_reg = REG_HMBOX_EXT_0,
 	.mbox_ext_width = 2,
@@ -6583,6 +7389,7 @@ static struct rtl8xxxu_fileops rtl8192eu_fops = {
 	.load_firmware = rtl8192eu_load_firmware,
 	.power_on = rtl8192eu_power_on,
 	.llt_init = rtl8xxxu_auto_llt_table,
+	.phy_iq_calibrate = rtl8723bu_phy_iq_calibrate,
 	.writeN_block_size = 128,
 	.mbox_ext_reg = REG_HMBOX_EXT0_8723B,
 	.mbox_ext_width = 4,

drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h

@@ -851,6 +851,7 @@ struct rtl8xxxu_fileops {
 	int (*power_on) (struct rtl8xxxu_priv *priv);
 	int (*llt_init) (struct rtl8xxxu_priv *priv, u8 last_tx_page);
 	void (*phy_init_antenna_selection) (struct rtl8xxxu_priv *priv);
+	void (*phy_iq_calibrate) (struct rtl8xxxu_priv *priv);
 	int writeN_block_size;
 	u16 mbox_ext_reg;
 	char mbox_ext_width;

drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h

@@ -708,6 +708,12 @@
 #define REG_MACID1			0x0700
 #define REG_BSSID1			0x0708
 
+/*
+ * This seems to be 8723bu specific
+ */
+#define REG_BT_CONTROL_8723BU		0x0764
+#define  BT_CONTROL_BT_GRANT		BIT(12)
+
 #define REG_FPGA0_RF_MODE		0x0800
 #define  FPGA_RF_MODE			BIT(0)
 #define  FPGA_RF_MODE_JAPAN		BIT(1)
@@ -810,6 +816,7 @@
 #define REG_RFE_CTRL_ANTA_SRC		0x0930	/* 8723BU */
 #define REG_RFE_PATH_SELECT		0x0940	/* 8723BU */
 #define REG_RFE_BUFFER			0x0944	/* 8723BU */
+#define REG_S0S1_PATH_SWITCH		0x0948	/* 8723BU */
 
 #define REG_CCK0_SYSTEM			0x0a00
 #define  CCK0_SIDEBAND			BIT(4)
@@ -1050,3 +1057,13 @@
 #define RF6052_REG_TXPA_G1		0x31	/* RF TX PA control */
 #define RF6052_REG_TXPA_G2		0x32	/* RF TX PA control */
 #define RF6052_REG_TXPA_G3		0x33	/* RF TX PA control */
+
+/*
+ * NextGen regs: 8723BU
+ */
+#define	RF6052_REG_UNKNOWN_43		0x43
+#define	RF6052_REG_UNKNOWN_55		0x55
+#define	RF6052_REG_S0S1			0xb0
+#define	RF6052_REG_UNKNOWN_DF		0xdf
+#define	RF6052_REG_UNKNOWN_ED		0xed
+#define	RF6052_REG_WE_LUT		0xef