Commit e16821bc authored by Jouni Malinen's avatar Jouni Malinen Committed by Johannes Berg

cfg80211: Dynamic channel bandwidth changes in AP mode

This extends NL80211_CMD_SET_CHANNEL to allow dynamic channel bandwidth
changes in AP mode (including P2P GO) during a lifetime of the BSS. This
can be used to implement, e.g., HT 20/40 MHz co-existence rules on the
2.4 GHz band.
Signed-off-by: default avatarJouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
parent b205786e
......@@ -2290,6 +2290,10 @@ struct cfg80211_qos_map {
* @channel_switch: initiate channel-switch procedure (with CSA)
*
* @set_qos_map: Set QoS mapping information to the driver
*
* @set_ap_chanwidth: Set the AP (including P2P GO) mode channel width for the
* given interface This is used e.g. for dynamic HT 20/40 MHz channel width
* changes during the lifetime of the BSS.
*/
struct cfg80211_ops {
int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
......@@ -2533,9 +2537,13 @@ struct cfg80211_ops {
int (*channel_switch)(struct wiphy *wiphy,
struct net_device *dev,
struct cfg80211_csa_settings *params);
int (*set_qos_map)(struct wiphy *wiphy,
struct net_device *dev,
struct cfg80211_qos_map *qos_map);
int (*set_ap_chanwidth)(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_chan_def *chandef);
};
/*
......
......@@ -3929,6 +3929,9 @@ enum nl80211_ap_sme_features {
* interface. An active monitor interface behaves like a normal monitor
* interface, but gets added to the driver. It ensures that incoming
* unicast packets directed at the configured interface address get ACKed.
* @NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE: This driver supports dynamic
* channel bandwidth change (e.g., HT 20 <-> 40 MHz channel) during the
* lifetime of a BSS.
*/
enum nl80211_feature_flags {
NL80211_FEATURE_SK_TX_STATUS = 1 << 0,
......@@ -3949,6 +3952,7 @@ enum nl80211_feature_flags {
NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 15,
NL80211_FEATURE_USERSPACE_MPM = 1 << 16,
NL80211_FEATURE_ACTIVE_MONITOR = 1 << 17,
NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE = 1 << 18,
};
/**
......
......@@ -1928,18 +1928,20 @@ static int nl80211_parse_chandef(struct cfg80211_registered_device *rdev,
}
static int __nl80211_set_channel(struct cfg80211_registered_device *rdev,
struct wireless_dev *wdev,
struct net_device *dev,
struct genl_info *info)
{
struct cfg80211_chan_def chandef;
int result;
enum nl80211_iftype iftype = NL80211_IFTYPE_MONITOR;
struct wireless_dev *wdev = NULL;
if (wdev)
iftype = wdev->iftype;
if (dev)
wdev = dev->ieee80211_ptr;
if (!nl80211_can_set_dev_channel(wdev))
return -EOPNOTSUPP;
if (wdev)
iftype = wdev->iftype;
result = nl80211_parse_chandef(rdev, info, &chandef);
if (result)
......@@ -1948,14 +1950,27 @@ static int __nl80211_set_channel(struct cfg80211_registered_device *rdev,
switch (iftype) {
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_P2P_GO:
if (wdev->beacon_interval) {
result = -EBUSY;
break;
}
if (!cfg80211_reg_can_beacon(&rdev->wiphy, &chandef, iftype)) {
result = -EINVAL;
break;
}
if (wdev->beacon_interval) {
if (!dev || !rdev->ops->set_ap_chanwidth ||
!(rdev->wiphy.features &
NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE)) {
result = -EBUSY;
break;
}
/* Only allow dynamic channel width changes */
if (chandef.chan != wdev->preset_chandef.chan) {
result = -EBUSY;
break;
}
result = rdev_set_ap_chanwidth(rdev, dev, &chandef);
if (result)
break;
}
wdev->preset_chandef = chandef;
result = 0;
break;
......@@ -1977,7 +1992,7 @@ static int nl80211_set_channel(struct sk_buff *skb, struct genl_info *info)
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *netdev = info->user_ptr[1];
return __nl80211_set_channel(rdev, netdev->ieee80211_ptr, info);
return __nl80211_set_channel(rdev, netdev, info);
}
static int nl80211_set_wds_peer(struct sk_buff *skb, struct genl_info *info)
......@@ -2099,9 +2114,10 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
}
if (info->attrs[NL80211_ATTR_WIPHY_FREQ]) {
result = __nl80211_set_channel(rdev,
nl80211_can_set_dev_channel(wdev) ? wdev : NULL,
info);
result = __nl80211_set_channel(
rdev,
nl80211_can_set_dev_channel(wdev) ? netdev : NULL,
info);
if (result)
return result;
}
......
......@@ -950,4 +950,17 @@ static inline int rdev_set_qos_map(struct cfg80211_registered_device *rdev,
return ret;
}
static inline int
rdev_set_ap_chanwidth(struct cfg80211_registered_device *rdev,
struct net_device *dev, struct cfg80211_chan_def *chandef)
{
int ret;
trace_rdev_set_ap_chanwidth(&rdev->wiphy, dev, chandef);
ret = rdev->ops->set_ap_chanwidth(&rdev->wiphy, dev, chandef);
trace_rdev_return_int(&rdev->wiphy, ret);
return ret;
}
#endif /* __CFG80211_RDEV_OPS */
......@@ -1919,6 +1919,24 @@ TRACE_EVENT(rdev_set_qos_map,
WIPHY_PR_ARG, NETDEV_PR_ARG, __entry->num_des)
);
TRACE_EVENT(rdev_set_ap_chanwidth,
TP_PROTO(struct wiphy *wiphy, struct net_device *netdev,
struct cfg80211_chan_def *chandef),
TP_ARGS(wiphy, netdev, chandef),
TP_STRUCT__entry(
WIPHY_ENTRY
NETDEV_ENTRY
CHAN_DEF_ENTRY
),
TP_fast_assign(
WIPHY_ASSIGN;
NETDEV_ASSIGN;
CHAN_DEF_ASSIGN(chandef);
),
TP_printk(WIPHY_PR_FMT ", " NETDEV_PR_FMT ", " CHAN_DEF_PR_FMT,
WIPHY_PR_ARG, NETDEV_PR_ARG, CHAN_DEF_PR_ARG)
);
/*************************************************************
* cfg80211 exported functions traces *
*************************************************************/
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment