Commit e184f2bf authored by Christoph Hellwig's avatar Christoph Hellwig Committed by Martin K. Petersen

scsi: remove the fdomain and fdomain_cs drivers

These drivers haven't seen any recent bug fixing and are two of the last
drivers using the scsi_module.c infrastruture that has been deprecated
15 years ago.
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
parent 6937d732
......@@ -5842,12 +5842,6 @@ F: tools/testing/selftests/futex/
F: tools/perf/bench/futex*
F: Documentation/*futex*
FUTURE DOMAIN TMC-16x0 SCSI DRIVER (16-bit)
M: Rik Faith <faith@cs.unc.edu>
L: linux-scsi@vger.kernel.org
S: Odd Fixes (e.g., new signatures)
F: drivers/scsi/fdomain.*
GCC PLUGINS
M: Kees Cook <keescook@chromium.org>
R: Emese Revfy <re.emese@gmail.com>
......
......@@ -184,7 +184,6 @@ CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
......
......@@ -640,26 +640,6 @@ config SCSI_DMX3191D
To compile this driver as a module, choose M here: the
module will be called dmx3191d.
config SCSI_FUTURE_DOMAIN
tristate "Future Domain 16xx SCSI/AHA-2920A support"
depends on (ISA || PCI) && SCSI
select CHECK_SIGNATURE
---help---
This is support for Future Domain's 16-bit SCSI host adapters
(TMC-1660/1680, TMC-1650/1670, TMC-3260, TMC-1610M/MER/MEX) and
other adapters based on the Future Domain chipsets (Quantum
ISA-200S, ISA-250MG; Adaptec AHA-2920A; and at least one IBM board).
It is explained in section 3.7 of the SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
NOTE: Newer Adaptec AHA-2920C boards use the Adaptec AIC-7850 chip
and should use the aic7xxx driver ("Adaptec AIC7xxx chipset SCSI
controller support"). This Future Domain driver works with the older
Adaptec AHA-2920A boards with a Future Domain chip on them.
To compile this driver as a module, choose M here: the
module will be called fdomain.
config SCSI_GDTH
tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support"
depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API
......
......@@ -74,7 +74,6 @@ obj-$(CONFIG_SCSI_AIC94XX) += aic94xx/
obj-$(CONFIG_SCSI_PM8001) += pm8001/
obj-$(CONFIG_SCSI_ISCI) += isci/
obj-$(CONFIG_SCSI_IPS) += ips.o
obj-$(CONFIG_SCSI_FUTURE_DOMAIN)+= fdomain.o
obj-$(CONFIG_SCSI_GENERIC_NCR5380) += g_NCR5380.o
obj-$(CONFIG_SCSI_NCR53C406A) += NCR53c406a.o
obj-$(CONFIG_SCSI_NCR_D700) += 53c700.o NCR_D700.o
......
This diff is collapsed.
/*
* fdomain.c -- Future Domain TMC-16x0 SCSI driver
* Author: Rickard E. Faith, faith@cs.unc.edu
* Copyright 1992-1996, 1998 Rickard E. Faith (faith@acm.org)
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2, or (at your option) any
* later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
extern struct scsi_host_template fdomain_driver_template;
extern int fdomain_setup(char *str);
extern struct Scsi_Host *__fdomain_16x0_detect(struct scsi_host_template *tpnt );
extern int fdomain_16x0_host_reset(struct scsi_cmnd *SCpnt);
......@@ -19,15 +19,6 @@ config PCMCIA_AHA152X
To compile this driver as a module, choose M here: the
module will be called aha152x_cs.
config PCMCIA_FDOMAIN
tristate "Future Domain PCMCIA support"
help
Say Y here if you intend to attach this type of PCMCIA SCSI host
adapter to your computer.
To compile this driver as a module, choose M here: the
module will be called fdomain_cs.
config PCMCIA_NINJA_SCSI
tristate "NinjaSCSI-3 / NinjaSCSI-32Bi (16bit) PCMCIA support"
depends on !64BIT
......
......@@ -4,11 +4,9 @@ ccflags-y := -Idrivers/scsi
# 16-bit client drivers
obj-$(CONFIG_PCMCIA_QLOGIC) += qlogic_cs.o
obj-$(CONFIG_PCMCIA_FDOMAIN) += fdomain_cs.o
obj-$(CONFIG_PCMCIA_AHA152X) += aha152x_cs.o
obj-$(CONFIG_PCMCIA_NINJA_SCSI) += nsp_cs.o
obj-$(CONFIG_PCMCIA_SYM53C500) += sym53c500_cs.o
aha152x_cs-objs := aha152x_stub.o aha152x_core.o
fdomain_cs-objs := fdomain_stub.o fdomain_core.o
qlogic_cs-objs := qlogic_stub.o
#define PCMCIA 1
#include "fdomain.c"
/*======================================================================
A driver for Future Domain-compatible PCMCIA SCSI cards
fdomain_cs.c 1.47 2001/10/13 00:08:52
The contents of this file are subject to the Mozilla Public
License Version 1.1 (the "License"); you may not use this file
except in compliance with the License. You may obtain a copy of
the License at http://www.mozilla.org/MPL/
Software distributed under the License is distributed on an "AS
IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
implied. See the License for the specific language governing
rights and limitations under the License.
The initial developer of the original code is David A. Hinds
<dahinds@users.sourceforge.net>. Portions created by David A. Hinds
are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
Alternatively, the contents of this file may be used under the
terms of the GNU General Public License version 2 (the "GPL"), in
which case the provisions of the GPL are applicable instead of the
above. If you wish to allow the use of your version of this file
only under the terms of the GPL and not to allow others to use
your version of this file under the MPL, indicate your decision
by deleting the provisions above and replace them with the notice
and other provisions required by the GPL. If you do not delete
the provisions above, a recipient may use your version of this
file under either the MPL or the GPL.
======================================================================*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/ioport.h>
#include <scsi/scsi.h>
#include <linux/major.h>
#include <linux/blkdev.h>
#include <scsi/scsi_ioctl.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include "fdomain.h"
#include <pcmcia/cistpl.h>
#include <pcmcia/ds.h>
/*====================================================================*/
/* Module parameters */
MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
MODULE_DESCRIPTION("Future Domain PCMCIA SCSI driver");
MODULE_LICENSE("Dual MPL/GPL");
/*====================================================================*/
typedef struct scsi_info_t {
struct pcmcia_device *p_dev;
struct Scsi_Host *host;
} scsi_info_t;
static void fdomain_release(struct pcmcia_device *link);
static void fdomain_detach(struct pcmcia_device *p_dev);
static int fdomain_config(struct pcmcia_device *link);
static int fdomain_probe(struct pcmcia_device *link)
{
scsi_info_t *info;
dev_dbg(&link->dev, "fdomain_attach()\n");
/* Create new SCSI device */
info = kzalloc(sizeof(*info), GFP_KERNEL);
if (!info)
return -ENOMEM;
info->p_dev = link;
link->priv = info;
link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
link->config_regs = PRESENT_OPTION;
return fdomain_config(link);
} /* fdomain_attach */
/*====================================================================*/
static void fdomain_detach(struct pcmcia_device *link)
{
dev_dbg(&link->dev, "fdomain_detach\n");
fdomain_release(link);
kfree(link->priv);
} /* fdomain_detach */
/*====================================================================*/
static int fdomain_config_check(struct pcmcia_device *p_dev, void *priv_data)
{
p_dev->io_lines = 10;
p_dev->resource[0]->end = 0x10;
p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
return pcmcia_request_io(p_dev);
}
static int fdomain_config(struct pcmcia_device *link)
{
scsi_info_t *info = link->priv;
int ret;
char str[22];
struct Scsi_Host *host;
dev_dbg(&link->dev, "fdomain_config\n");
ret = pcmcia_loop_config(link, fdomain_config_check, NULL);
if (ret)
goto failed;
if (!link->irq)
goto failed;
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
/* A bad hack... */
release_region(link->resource[0]->start, resource_size(link->resource[0]));
/* Set configuration options for the fdomain driver */
sprintf(str, "%d,%d", (unsigned int) link->resource[0]->start, link->irq);
fdomain_setup(str);
host = __fdomain_16x0_detect(&fdomain_driver_template);
if (!host) {
printk(KERN_INFO "fdomain_cs: no SCSI devices found\n");
goto failed;
}
if (scsi_add_host(host, NULL))
goto failed;
scsi_scan_host(host);
info->host = host;
return 0;
failed:
fdomain_release(link);
return -ENODEV;
} /* fdomain_config */
/*====================================================================*/
static void fdomain_release(struct pcmcia_device *link)
{
scsi_info_t *info = link->priv;
dev_dbg(&link->dev, "fdomain_release\n");
scsi_remove_host(info->host);
pcmcia_disable_device(link);
scsi_unregister(info->host);
}
/*====================================================================*/
static int fdomain_resume(struct pcmcia_device *link)
{
fdomain_16x0_host_reset(NULL);
return 0;
}
static const struct pcmcia_device_id fdomain_ids[] = {
PCMCIA_DEVICE_PROD_ID12("IBM Corp.", "SCSI PCMCIA Card", 0xe3736c88, 0x859cad20),
PCMCIA_DEVICE_PROD_ID1("SCSI PCMCIA Adapter Card", 0x8dacb57e),
PCMCIA_DEVICE_PROD_ID12(" SIMPLE TECHNOLOGY Corporation", "SCSI PCMCIA Credit Card Controller", 0x182bdafe, 0xc80d106f),
PCMCIA_DEVICE_NULL,
};
MODULE_DEVICE_TABLE(pcmcia, fdomain_ids);
static struct pcmcia_driver fdomain_cs_driver = {
.owner = THIS_MODULE,
.name = "fdomain_cs",
.probe = fdomain_probe,
.remove = fdomain_detach,
.id_table = fdomain_ids,
.resume = fdomain_resume,
};
static int __init init_fdomain_cs(void)
{
return pcmcia_register_driver(&fdomain_cs_driver);
}
static void __exit exit_fdomain_cs(void)
{
pcmcia_unregister_driver(&fdomain_cs_driver);
}
module_init(init_fdomain_cs);
module_exit(exit_fdomain_cs);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment