usb: chipidea: core: handle usb role switch in a common way

Currently, ci_usb_role_switch_set() may be called before system resume
stage when suspended. Worse yet, ci_hdrc device may stay at RPM_ACTIVE
state which will cause pm_runtime_get_sync() fail to resume the device.
In this case, role-switch may unable to complete transition process due
to not exit from lpm state or due to lack some means after system resume.

Same as ci_cable_notifier(), usb_role_switch could handle its events based
on ci_hdrc_cable mechanism.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20221009155336.766960-1-xu.yang_2@nxp.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/chipidea/core.c

@@ -608,49 +608,32 @@ static int ci_usb_role_switch_set(struct usb_role_switch *sw,
 				  enum usb_role role)
 {
 	struct ci_hdrc *ci = usb_role_switch_get_drvdata(sw);
-	struct ci_hdrc_cable *cable = NULL;
-	enum usb_role current_role = ci_role_to_usb_role(ci);
-	enum ci_role ci_role = usb_role_to_ci_role(role);
-	unsigned long flags;
-
-	if ((ci_role != CI_ROLE_END && !ci->roles[ci_role]) ||
-	    (current_role == role))
-		return 0;
+	struct ci_hdrc_cable *cable;
 
-	pm_runtime_get_sync(ci->dev);
-	/* Stop current role */
-	spin_lock_irqsave(&ci->lock, flags);
-	if (current_role == USB_ROLE_DEVICE)
+	if (role == USB_ROLE_HOST) {
+		cable = &ci->platdata->id_extcon;
+		cable->changed = true;
+		cable->connected = true;
 		cable = &ci->platdata->vbus_extcon;
-	else if (current_role == USB_ROLE_HOST)
+		cable->changed = true;
+		cable->connected = false;
+	} else if (role == USB_ROLE_DEVICE) {
 		cable = &ci->platdata->id_extcon;
-
-	if (cable) {
 		cable->changed = true;
 		cable->connected = false;
-		ci_irq(ci);
-		spin_unlock_irqrestore(&ci->lock, flags);
-		if (ci->wq && role != USB_ROLE_NONE)
-			flush_workqueue(ci->wq);
-		spin_lock_irqsave(&ci->lock, flags);
-	}
-
-	cable = NULL;
-
-	/* Start target role */
-	if (role == USB_ROLE_DEVICE)
 		cable = &ci->platdata->vbus_extcon;
-	else if (role == USB_ROLE_HOST)
-		cable = &ci->platdata->id_extcon;
-
-	if (cable) {
 		cable->changed = true;
 		cable->connected = true;
-		ci_irq(ci);
+	} else {
+		cable = &ci->platdata->id_extcon;
+		cable->changed = true;
+		cable->connected = false;
+		cable = &ci->platdata->vbus_extcon;
+		cable->changed = true;
+		cable->connected = false;
 	}
-	spin_unlock_irqrestore(&ci->lock, flags);
-	pm_runtime_put_sync(ci->dev);
 
+	ci_irq(ci);
 	return 0;
 }
 
@@ -1305,11 +1288,13 @@ static void ci_extcon_wakeup_int(struct ci_hdrc *ci)
 	cable_id = &ci->platdata->id_extcon;
 	cable_vbus = &ci->platdata->vbus_extcon;
 
-	if (!IS_ERR(cable_id->edev) && ci->is_otg &&
+	if ((!IS_ERR(cable_id->edev) || !IS_ERR(ci->role_switch))
+		&& ci->is_otg &&
 		(otgsc & OTGSC_IDIE) && (otgsc & OTGSC_IDIS))
 		ci_irq(ci);
 
-	if (!IS_ERR(cable_vbus->edev) && ci->is_otg &&
+	if ((!IS_ERR(cable_vbus->edev) || !IS_ERR(ci->role_switch))
+		&& ci->is_otg &&
 		(otgsc & OTGSC_BSVIE) && (otgsc & OTGSC_BSVIS))
 		ci_irq(ci);
 }