Commit e1b6eb3c authored by Szymon Janc's avatar Szymon Janc Committed by Gustavo F. Padovan

Bluetooth: Increase HCI reset timeout in hci_dev_do_close

I've noticed that my CSR usb dongle was not working if it was plugged in when
PC was booting. It looks like I get two HCI reset command complete events (see
hcidump logs below).
The root cause is reset called from off_timer. Timeout for this reset to
complete is set to 250ms and my bt dongle requires more time for replying with
command complete event. After that, chip seems to reply with reset command
complete event for next non-reset command.

Attached patch increase mentioned timeout to HCI_INIT_TIMEOUT, this value is
already used for timeouting hci_reset_req in hci_dev_reset().

This might also be related to BT not working after suspend that was reported
here some time ago.

Hcidump log:

2011-09-12 23:13:27.379465 < HCI Command: Reset (0x03|0x0003) plen 0
2011-09-12 23:13:27.380797 > HCI Event: Command Complete (0x0e) plen 4
    Reset (0x03|0x0003) ncmd 1
    status 0x00
2011-09-12 23:13:27.380859 < HCI Command: Read Local Supported Features (0x04|0x000
3) plen 0
2011-09-12 23:13:27.760789 > HCI Event: Command Complete (0x0e) plen 4
    Reset (0x03|0x0003) ncmd 1
    status 0x00
2011-09-12 23:13:27.760831 < HCI Command: Read Local Version Information (0x04|0x00
01) plen 0
2011-09-12 23:13:27.764780 > HCI Event: Command Complete (0x0e) plen 12
    Read Local Version Information (0x04|0x0001) ncmd 1
    status 0x00
    HCI Version: 1.1 (0x1) HCI Revision: 0x36f
    LMP Version: 1.1 (0x1) LMP Subversion: 0x36f
    Manufacturer: Cambridge Silicon Radio (10)
Signed-off-by: default avatarSzymon Janc <szymon@janc.net.pl>
Signed-off-by: default avatarGustavo F. Padovan <padovan@profusion.mobi>
parent 88149db4
......@@ -613,7 +613,7 @@ static int hci_dev_do_close(struct hci_dev *hdev)
if (!test_bit(HCI_RAW, &hdev->flags)) {
set_bit(HCI_INIT, &hdev->flags);
__hci_request(hdev, hci_reset_req, 0,
msecs_to_jiffies(250));
msecs_to_jiffies(HCI_INIT_TIMEOUT));
clear_bit(HCI_INIT, &hdev->flags);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment